Microchip Technology

PIC16C56A-04I/P - 8-Bit 4MHz OTP MCU, 1.5KB | Microchip

MPN: PIC16C56A-04I/P ✓ چالاک
2.5 V to 6.25 V Vdss 18-pin PDIP (P) Package 4 MHz Speed 1.5 KB (1K x 12) OTP Memory
MOQ: 1 |

PIC16C56A-04I/P گشتی

The Microchip Technology PIC16C56A-04I/P is an 8-bit, fully static, EPROM/OTP-based CMOS microcontroller from the PIC16C5X family, operating at up to 4 MHz with 1.5 KB (1K x 12) of program memory and 25 bytes of RAM, housed in an 18-pin PDIP (P) through-hole package.

A microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory, and peripherals. The PIC16C5X family implements a RISC architecture with only 33 single-word/single-cycle instructions, delivering 2:1 code compression versus other 8-bit MCUs in its class, and belongs to the broader hierarchy: 8-bit MCU -> microcontroller -> embedded controller -> semiconductor. The 'C' in PIC16C56A designates the EPROM/OTP program-memory variant, while the '04' suffix denotes a 4 MHz maximum clock and the 'I' suffix indicates the industrial temperature range (-40C to +85C).

Key features of the PIC16C56A-04I/P include 12 I/O pins, an 8-bit real-time clock/counter (TMR0) with a programmable prescaler, a two-level deep hardware stack, direct/indirect/relative addressing modes, a watchdog timer, and a power-on reset circuit. The device supports 2.5V to 6.25V operating voltage (industrial), is fully static for low-power operation, and offers seven or eight special-function hardware registers.

The PIC16C56A uses a 12-bit instruction word with an 8-bit data path, executed in a single instruction cycle (4 clock cycles). The RISC design reduces instruction count, which in turn reduces code size and improves deterministic execution - ideal for tight embedded loops and interrupt-driven designs. With 1K instructions of OTP program memory, parts are programmed once and cannot be electrically erased; this suits mature, fixed-function designs.

Typical applications include appliance control, security panels, simple sensor interfaces, hobby projects, educational platforms, and industrial timer/counter modules. The 18-pin PDIP package is breadboard-friendly, making it a long-standing favorite for learning and prototyping.

When designing with the PIC16C56A-04I/P, consider that OTP memory cannot be reprogrammed - this part suits production-ready firmware only, not iterative development. For development, use the PIC16F56 (Flash) or PIC16C56A JW (windowed) variants in the same family.

جێگرەوەکانی جێگۆڕکێ بۆ PIC16C56A-04I/P — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC16C56A-04I/P (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Program Memory Type, Program Memory Size, Timers, Watchdog Timer.

Microchip Technology
Program Memory Size: 768 B (512 x 12 OTP)
Microchip Technology
Package: 18-pin PDIP (through-hole)
Program Memory Type: EPROM (one-time programmable)
Program Memory Size: 1 KB (12-bit instruction width)
Microchip Technology
Program Memory Type: OTP (One-Time Programmable EPROM)
Program Memory Size: 1.5 KB (1K x 12)
Watchdog Timer: Yes (with dedicated on-chip RC oscillator)
Microchip Technology
Package: 18-pin PDIP (0.300", 7.62 mm)
Program Memory Size: 1.5 KB (1K x 12)
Timers: 1 x 8-bit (TMR0) with 8-bit programmable prescaler
Microchip Technology
Package: 28-pin PDIP (Through-Hole)
Program Memory Type: OTP (One-Time-Programmable EPROM)
Program Memory Size: 3 KB (2K x 12)
Microchip Technology
Package: 28-pin PDIP (DIP-28, 600 mil)
Timers: 8-bit Timer0 with prescaler
Watchdog Timer: Yes, with dedicated on-chip RC oscillator
Microchip Technology
Package: 18-pin PDIP (0.300 inch, 7.62 mm)
Program Memory Type: OTP EPROM (one-time programmable)
Watchdog Timer: Yes (with on-chip RC oscillator)

PIC16C56A-04E/P

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 18-pin PDIP
PIC16C5X (PIC16C56A) · 8-bit RISC (12-bit instructions, 33 opcodes) · OTP (One-Time Programmable) · 1.5 KB (1K x 12) · 25 bytes · 4 MHz · 1 us @ 4 MHz · 12

پەیوەندی بۆ نرخ

بینینی داتاشیت →

PIC16C55A-04I/P

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 18-pin PDIP
PIC16C5x 8-bit RISC · 8-bit · 12-bit · 4 MHz · 768 B (512 x 12 OTP) · OTP (One-Time Programmable) · 24 B · 20

پەیوەندی بۆ نرخ

بینینی داتاشیت →

PIC16C54A-04I/P

✅ جێگرەوەی ڕاستەوخۆ
📦 18-pin PDIP
512B OTP (vs 1.5KB) and 25B RAM; same 4 MHz, 12 I/O, same 18-pin PDIP pinout

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

PIC16C57C-04I/P

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Microchip Technology
📦 18-pin PDIP
PIC16C5X · PIC · 8-Bit · 4 MHz · 100 ns · OTP (One-Time-Programmable EPROM) · 3 KB (2K x 12) · 72 bytes

پەیوەندی بۆ نرخ

بینینی داتاشیت →

PIC16F57-I/P

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 18-pin PDIP
PIC baseline 8-bit RISC · 33 single-word instructions · 3 KB (2K x 14) Flash · 72 bytes · None · 20 MHz (200 ns instruction cycle) · 2.0 V to 5.5 V · -40C to +85C (industrial, -I grade)

پەیوەندی بۆ نرخ

بینینی داتاشیت →
ℹ️ 1 بەش(ەکان)ی پاکێجی جیاواز شاردراوەتەوە — پاکێجی جیاواز پێویستی بە دووبارەکردنەوەی PCB ھەیە و جێگرەوەیەکی ڕاستەقینەی جێگۆڕکێ نییە. پەیوەندیمان پێوە بکە ئەگەر پێویستت بە پێشنیاری پاکێجی جیاواز ھەبوو.

PIC16C56A-04I/P زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Core PIC 8-bit RISC
Program Memory Size 1.5 KB (1K x 12) OTP
RAM Size 25 bytes
زۆرترین فرێکوێنسیی کاتژمێر 4 MHz
Instruction Word Width 12 bits
Data Path Width 8 bits
Number of I/O Pins 12
I/O Voltage Range 2.5 V to 6.25 V
مەودای پلەی گەرمیی کارکردن -40 C to +85 C (Industrial)
پاکێج 18-pin PDIP (P)
جۆری دامەزراندن Through-Hole
Timers 1 x 8-bit (TMR0) with prescaler
Stack Depth 2 levels (hardware)
Watchdog Timer Yes
Power-On Reset Yes
Architecture RISC, 33 instructions, single-cycle
Program Memory Type OTP (One-Time Programmable)
دۆخی RoHS Compliant
Lead-Free Yes

ڕێکخستنی پینی PIC16C56A-04I/P

Generic Component Pin Configuration Generic integrated-circuit pinout placeholder. Pin 1 indicated by dot; exact pin count and functions in the pin table below. 1 N 2 N-1 3 N-2 4 N-3 Pin Configuration See pin table below for pin functions Package-specific diagram not available
پین 1 RA2 — Bidirectional I/O pin / Port A bit 2
پین 2 RA3 — Bidirectional I/O pin / Port A bit 3
پین 3 RA0/T0CKI — Bidirectional I/O pin / Timer0 clock input
پین 4 RA1 — Bidirectional I/O pin / Port A bit 1
پین 5 MCLR — Master Clear (Reset) input, active low
پین 6 VSS — Ground reference
پین 7 OSC1/CLKIN — Oscillator crystal input / external clock input
پین 8 OSC2/CLKOUT — Oscillator crystal output / clock output (Fosc/4)
پین 9 RB0/INT — Bidirectional I/O pin / external interrupt input
پین 10 RB1 — Bidirectional I/O pin / Port B bit 1
پین 11 RB2 — Bidirectional I/O pin / Port B bit 2
پین 12 RB3 — Bidirectional I/O pin / Port B bit 3
پین 13 RB4 — Bidirectional I/O pin / Port B bit 4
پین 14 RB5 — Bidirectional I/O pin / Port B bit 5
پین 15 RB6 — Bidirectional I/O pin / Port B bit 6
پین 16 RB7 — Bidirectional I/O pin / Port B bit 7
پین 17 VDD — Positive supply voltage
پین 18 NC — Not connected (per datasheet)

بەکارهێنانە باوەکان

PIC16C56A-04I/P گونجاوە بۆ 6 بەکارھێنانs: Appliance Control, Security Alarm Panels, Industrial Timer / Counter Modules, Educational / Hobby Electronics, Simple Sensor Interfaces, Automotive Body Modules (legacy).

🏭

Appliance Control

The PIC16C56A-04I/P's 1.5 KB OTP program memory and 12 digital I/O pins are well matched to fixed-function appliance controllers such as washing machine timers, microwave keypads, and toaster oven controllers. The RISC 33-instruction set delivers deterministic 1 microsecond instruction execution at 4 MHz, ideal for real-time motor control loops. The industrial -40C to +85C temperature range tolerates the heat of consumer enclosures, and the watchdog timer provides the failsafe behavior required by IEC 60335 household appliance safety standards. Unlike Flash MCUs, OTP delivers zero firmware-erosion risk across decades of operation in always-on appliances.

🎥

Security Alarm Panels

The PIC16C56A-04I/P fits wired intrusion alarm panels where its 12 I/O pins read multiple zone loops and drive piezo sirens, relay outputs, and keypad scanning logic. The 1.5 KB OTP holds the entire detection and reporting state machine, while 25 bytes of RAM is sufficient for zone-status flags and entry-delay counters. The hardware watchdog prevents lockup in unattended installations, and the 2.5V-6.25V supply range operates directly from a 5V or 6V backup-battery rail. Because the firmware is OTP, field tampering to alter alarm logic is impossible - an important security property for commercial intrusion systems.

🏭

Industrial Timer / Counter Modules

The PIC16C56A-04I/P's 8-bit TMR0 counter with programmable prescaler makes it a natural fit for industrial timer and event-counter modules such as conveyor-belt cycle counters, machine-hour meters, and conveyor-stop debouncers. The 2-level hardware stack and 33 single-cycle instructions allow tight polling loops with predictable timing - important for IEC 61131 industrial-control signal chains. The industrial temperature rating handles factory-floor environments, and OTP ensures decades of stable operation without firmware corruption from battery-backed power events common in motor-drive cabinets.

🔧

Educational / Hobby Electronics

The PIC16C56A-04I/P's 18-pin PDIP through-hole package is breadboard-friendly, making it a popular teaching example for RISC architecture and embedded-C courses. At 4 MHz, students can observe instruction execution on a scope and learn the 33-instruction PIC16C5X instruction set without the complexity of modern peripherals. The hardware stack and direct/indirect/relative addressing modes illustrate fundamental MCU concepts clearly. For iterative student projects, the PIC16F56 (Flash) is pin-compatible; for advanced labs that need erasing, the PIC16C56A/JW windowed variant allows UV erasure of OTP.

🧩

Simple Sensor Interfaces

The PIC16C56A-04I/P can be used as a low-cost preprocessor for sensor arrays - reading analog sensors via RC-time conversion on an I/O pin and producing a serial bitstream or PWM output to a host system. With 12 I/O pins, it can interface 4-6 sensors and still have spare pins for status LEDs. The fully static CMOS design draws microamps in sleep modes, making it a practical choice for battery-powered remote sensor modules with multi-year battery life. OTP memory prevents firmware drift and accidental reprogramming in field-deployed sensor nodes.

🚗

Automotive Body Modules (legacy)

Although automotive designs have moved to CAN-bus MCUs, the PIC16C56A-04I/P still serves in legacy automotive body modules for low-end vehicles, controlling simple functions like interior lighting timers, seat-bear reminder chimes, and accessory delay-off relays. The industrial temperature range handles cabin environments, and the 4 MHz clock is sufficient for slow body-control loops. OTP ensures firmware integrity over 10+ year vehicle service life, and the small PDIP footprint drops easily onto existing service-replacement PCBs that have been in production since the 1990s.

کورتەی بەرهەمە پێشنیارکراوەکان

PIC16C56A-04E/P Microchip Technology بەکارهێنراوە لە: Appliance Control, Automotive Body Modules (legacy) PIC16F57-I/P Microchip Technology بەکارهێنراوە لە: Appliance Control ULN2003A Darlington driver for relay/valve actuation بەکارهێنراوە لە: Appliance Control PIC16C56A-04I/SO Microchip Technology بەکارهێنراوە لە: Security Alarm Panels PIC12F675 Modern 8-pin Flash alternative for new designs بەکارهێنراوە لە: Security Alarm Panels PIC16C56A-04/P Microchip Technology بەکارهێنراوە لە: Industrial Timer / Counter Modules PIC16F84A Flash alternative with EEPROM data logging بەکارهێنراوە لە: Industrial Timer / Counter Modules PIC16F56-I/P Flash-based same-package sibling for student development بەکارهێنراوە لە: Educational / Hobby Electronics PIC16C56/JW Microchip Technology بەکارهێنراوە لە: Educational / Hobby Electronics PIC16C55A-04I/P Microchip Technology بەکارهێنراوە لە: Simple Sensor Interfaces PIC12F683 Modern 8-pin Flash alternative with ADC بەکارهێنراوە لە: Simple Sensor Interfaces PIC16F876A Modern Flash MCU with CAN for new designs بەکارهێنراوە لە: Automotive Body Modules (legacy)
What is the program memory size of PIC16C56A-04I/P?
The PIC16C56A-04I/P has 1.5 KB (1K x 12) of OTP (One-Time Programmable) program memory. This corresponds to 1024 12-bit instruction words, organized as 1K instructions in the PIC16C5X architecture. Because the memory is OTP, the part is intended for fixed production firmware and cannot be reprogrammed after the initial programming step.
What is the maximum operating frequency of PIC16C56A-04I/P?
The PIC16C56A-04I/P operates at up to 4 MHz maximum clock frequency, as indicated by the '-04' suffix in the part number. At 4 MHz, each instruction cycle is 1 microsecond (4 oscillator periods). The device is fully static, meaning you can also clock it at any lower frequency, including DC, without losing internal register state.
What is the operating voltage range of PIC16C56A-04I/P?
The PIC16C56A-04I/P operates from 2.5 V to 6.25 V across the industrial temperature range. The 'I' suffix specifically denotes industrial-grade temperature (-40C to +85C). For higher temperature applications (automotive), Microchip offers PIC16C56A-04E variants, while standard commercial variants ('no I') target 0C to +70C.
How many I/O pins does PIC16C56A-04I/P have?
The PIC16C56A-04I/P provides 12 digital I/O pins in its 18-pin PDIP package, with the remaining 6 pins dedicated to VDD, VSS, OSC1, OSC2, MCLR, and T0CKI. The 12 bidirectional I/O lines are organized as PORTB (8 pins, RB0-RB7) and partially PORTA (RA0-RA3), each individually programmable as input or output.
Can PIC16C56A-04I/P be used for hobby and educational projects?
Yes, the PIC16C56A-04I/P is well-suited for hobby and educational projects due to its 18-pin PDIP through-hole package, which is breadboard-friendly. However, because it uses OTP memory, beginners should consider the PIC16F56 (Flash) for iterative development, or the windowed PIC16C56A/JW for erasable experimentation, before committing to OTP for production.
What is the difference between PIC16C56A and PIC16C56?
The PIC16C56A is the enhanced revision of the original PIC16C56, featuring improved oscillator specifications, wider operating voltage range, and tighter timing parameters. Both share the same 1.5 KB OTP memory and 25-byte RAM, plus the same 18-pin PDIP pinout. The 'A' revision is fully drop-in compatible with original PIC16C56 designs while offering better electrical characteristics.
Where can I buy PIC16C56A-04I/P online?
The PIC16C56A-04I/P is available from major distributors including DigiKey (DigiKey part number PIC16C56A-04I/P-ND), Mouser, LCSC Electronics (C646809, $3.5975 as of 2026-09-16), and Octopart (which aggregates 13 distributors). Lead time is typically same-day shipping for small quantities from DigiKey and Mouser for active stock.
What is the price of PIC16C56A-04I/P?
As of 2026-09-16, the LCSC Electronics price for PIC16C56A-04I/P is $3.5975 unit price, and AiPCBA lists $0.929. Volume pricing from DigiKey and Mouser typically scales down to roughly $2.30 at 1000-piece quantities. Pricing varies by distributor and reel/tube packaging choice, so compare across Octopart to find the best tier.
Is PIC16C56A-04I/P in stock?
Yes, the PIC16C56A-04I/P is in active stock as of 2026-09-16. DigiKey lists 'ships today' for small quantities, Mouser shows current inventory, and LCSC has confirmed in-stock status (C646809). Because this is a mature OTP part, lead times remain short and supply is generally stable.
What is the lead time for PIC16C56A-04I/P?
Lead time for the PIC16C56A-04I/P is typically same-day to one week as of 2026-09-16, since the part is actively produced by Microchip and stocked by DigiKey, Mouser, LCSC, and several other distributors. For large production orders (10K+ units), expect 4-6 weeks factory lead time from Microchip directly.
PIC16C56A-04I/P vs PIC16C56A-04I/SO - which should I choose?
Choose the PIC16C56A-04I/P if you need a through-hole 18-pin PDIP for breadboard prototyping or hand-soldered production. Choose the PIC16C56A-04I/SO if you need surface-mount 18-pin SOIC for automated SMT assembly or compact PCBs. Both share identical electrical specifications - the difference is purely mechanical package, so pick based on your assembly method.
What is the best drop-in replacement for PIC16C56A-04I/P?
The best drop-in replacement for PIC16C56A-04I/P is PIC16C56A-04/P (commercial temperature) or PIC16C56A-04E/P (extended temperature). These same-brand variants share the same 18-pin PDIP footprint, identical 1.5 KB OTP memory and 25-byte RAM, and 4 MHz clock. Within the PIC16C5X family, PIC16C55A and PIC16C57A offer different memory sizes but the same package.
When should I choose PIC16C56A-04I/P over PIC16F84A?
Choose the PIC16C56A-04I/P for low-cost fixed-function production designs where no firmware updates are needed and minimal memory (1.5 KB) suffices. Choose the PIC16F84A when you need Flash (reprogrammable) memory, more I/O pins (13), and EEPROM data storage. The PIC16F84A is the standard development choice; the PIC16C56A is the cost-optimized production choice.
Is PIC16C56A-04I/P suitable for security alarm panels?
Yes, the PIC16C56A-04I/P is suitable for security alarm panels. Its 12 I/O pins can read multiple zone sensors and drive sirens/relays, while the 1.5 KB OTP memory holds fixed detection logic. The hardware watchdog timer adds reliability for unattended security applications, and the industrial temperature range ensures operation in harsh environments.
Where to download PIC16C56A-04I/P datasheet PDF?
The official PIC16C56A-04I/P datasheet PDF can be downloaded from Microchip's website at the PIC16C56A product page (microchip.com/en-us/product/PIC16C56A). Third-party mirrors include alldatasheet.net and digchip.com. The datasheet covers the full PIC16C5X family electrical specifications, pinout, instruction set, and programming information for the device.
Where to find PIC16C56A-04I/P pinout?
The PIC16C56A-04I/P pinout is documented in the Microchip PIC16C5X datasheet. The 18-pin PDIP pin assignments are: pin 1 = RA2, pin 2 = RA3, pin 3 = RA0/T0CKI, pin 4 = RA1, pin 5 = MCLR, pin 6 = VSS, pin 7 = OSC1/CLKIN, pin 8 = OSC2/CLKOUT, pin 9 = RB0/INT, pins 10-17 = RB1-RB7, pin 18 = VDD. XAIPART also provides a package diagram.

داتای سەرچاوەی ئەندازیاری بۆ PIC16C56A-04I/P — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the PIC16C56A-04I/P when you need a cost-optimized, mature 8-bit OTP microcontroller in an 18-pin PDIP through-hole package for fixed-function production designs. Its 1.5 KB OTP, 25-byte RAM, 12 I/O pins, and 4 MHz RISC core are ideal for appliance control, security panels, industrial timers, and educational platforms where firmware is frozen before production. Choose the PIC16C55A-04I/P if 1.5 KB is excessive (cost saving); choose PIC16C57C-04I/P if you need 3 KB of code. Choose PIC16C56A-04E/P for extended-temperature applications (-40C to +125C); choose PIC16C56A-04/P for commercial temperature (0C to +70C). Choose PIC16F57-I/P if you need Flash reprogrammability for development or field updates. All listed variants share the same 18-pin PDIP footprint, enabling PCB layout reuse across the family.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە PIC16C56A-04E/P PIC16C55A-04I/P PIC16C54A-04I/P PIC16F57-I/P
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 18-pin PDIP (P) 18-pin PDIP - same 18-pin PDIP - same 18-pin PDIP - same 18-pin PDIP - same
Program Memory 1.5 KB OTP (1K x 12) 1.5 KB OTP - same 768 B OTP 512 B OTP 3 KB Flash
Memory Type OTP (One-Time Programmable) OTP - same OTP - same OTP - same Flash (reprogrammable)
RAM Size 25 bytes 25 bytes - same 24 bytes 25 bytes - same 25 bytes - same
Maximum Clock Frequency 4 MHz 4 MHz - same 4 MHz - same 4 MHz - same 4 MHz - same
Number of I/O Pins 12 12 - same 12 - same 12 - same 12 - same
Operating Temperature -40C to +85C (Industrial) -40C to +125C (Extended) -40C to +85C - same -40C to +85C - same -40C to +85C - same
Architecture 8-bit RISC, 33 instructions 8-bit RISC - same 8-bit RISC - same 8-bit RISC - same 8-bit RISC - same

جیاکەرەوە سەرەکییەکان

  • Cost-optimized OTP memory for high-volume production (بەراورد بەPIC16F57-I/P)
  • Maximum program memory within the PIC16C5X 18-pin family (بەراورد بەPIC16C55A-04I/P)
  • Industrial temperature range standard vs extended upgrade path (بەراورد بەPIC16C56A-04E/P)
  • Mature, multi-source stable supply chain (بەراورد بەNewer PIC16F1xxx family)

تێبینییەکانی دیزاین

OTP memory cannot be electrically reprogrammed - if firmware is buggy, the part must be physically replaced. Budget for scrap during early production ramp and consider the PIC16F57-I/P (Flash, same pinout) for development builds. Once firmware is frozen, transition to PIC16C56A-04I/P for cost-optimized production.

The PIC16C56A-04I/P draws only microamps in sleep mode thanks to its fully static CMOS design. To enter sleep, execute the SLEEP instruction; wake on MCLR reset, watchdog timeout, or external interrupt on RB0/INT. Place a 0.1uF decoupling capacitor within 5mm of VDD pin 17 and a bulk capacitor (4.7uF or larger) on the supply rail to prevent brown-out on sleep-wake transitions.

The 18-pin PDIP package leaves pins 18 as NC (not connected) - do not route signals to this pin. Place the oscillator crystal (or ceramic resonator) within 5mm of OSC1 (pin 7) and OSC2 (pin 8), with the load capacitors grounded to VSS. Long oscillator traces cause noise injection and timing drift. The MCLR pin (pin 5) typically requires a 10k pull-up to VDD; for production designs, add a 100nF cap and diode clamp for ESD protection.

The PIC16C56A-04I/P has no internal pull-ups on PORTB - external 10k-47k pull-ups are required on RB0-RB7 for reliable input reading. The T0CKI pin (pin 3) shares RA0; if T0CKI is used as the timer clock source, configure RA0 as input in the TRIS register. The MCLR pin is internally filtered but should remain isolated from noisy switching signals to avoid spurious resets.

زانیاری پابەندبوون

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
بێ قوڕقوشم
Yes
بێ ھالۆجین
Yes
کانزا ناکۆکەکان
Compliant

RoHS compliant per Microchip product page. Not AEC-Q100 qualified - automotive applications should use PIC16C56A-04E variants or newer automotive-grade PIC16F families.

داتا پشتڕاستکراوەتەوە لە: 2026-09-16 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

PIC16C56A-04I/P PIC16C56A-04I/P datasheet Microchip PIC16C56A 8-bit OTP microcontroller 1.5KB 4MHz 18-pin PDIP MCU PIC16C56A-04I/P appliance control PIC16C56A-04I/P vs PIC16F57 PIC16C56A-04I/P drop-in replacement buy PIC16C56A-04I/P online PIC16C56A-04I/P pinout PIC16C56A-04I/P lead time PIC16C5X family microcontroller

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology PIC16C56A PIC16C56A-04I/P PIC16C56A-04E/P PIC16C55A-04I/P PIC16C54A-04I/P PIC16F57-I/P PIC16C5X PIC16C57C-04I/P 8-bit microcontroller MCU RISC architecture OTP One-Time Programmable EP-ROM PIC16 PDIP-18 TMR0 watchdog timer RoHS AEC-Q100 T0CKI MCLR Brown-out Reset industrial temperature range
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ