PIC16C62BT-20/SS - 8-Bit 20MHz OTP MCU 3.5KB | Microchip
MPN: PIC16C62BT-20/SS ✗ کۆتایی ژیانPIC16C62BT-20/SS گشتی
A microcontroller (MCU) is a single-chip computer containing a CPU, program memory, data RAM, and peripheral interfaces such as timers, serial ports, and I/O pins. The PIC16C62BT-20/SS belongs to the PICmicro mid-range family, positioned in the 8-bit MCU hierarchy as: PIC16C62B -> PIC16C family -> PICmicro mid-range -> 8-bit microcontroller -> microcontroller -> embedded processor -> semiconductor. Mid-range PIC MCUs use a 14-bit instruction set optimized for deterministic single-cycle execution, ideal for real-time control tasks where predictable interrupt response is essential.
Key features include 22 digital I/O pins multiplexed across peripheral functions, an integrated analog comparator, a capture/compare/PWM (CCP) module, a USART serial port, two 8-bit timers with one 16-bit timer, and a watchdog timer for code execution monitoring. The OTP memory allows a single programming cycle, making this part suitable for mature, low-cost production runs where firmware is finalized.
Technically, the device operates from a 3.0V to 5.5V supply, draws less than 2 mA at 5V/20 MHz, and includes power-on reset, brown-out detection, and an in-circuit serial programming (ICSP) interface. The Harvard architecture separates program and data buses, enabling simultaneous instruction fetch and data access for higher throughput compared to von Neumann designs.
Typical applications include appliance control, motor drive signal conditioning, automotive body electronics, industrial sensor interfaces, and legacy embedded system maintenance. The wide commercial temperature range (0C to +70C) supports indoor and protected-environment deployments.
Designers should note that OTP memory cannot be reprogrammed - choose Flash-based PIC16F equivalents for development or field-updatable firmware. The SSOP-28 package suits space-constrained boards but requires careful thermal management at sustained 20 MHz operation.
This page synthesizes distributor pricing from DigiKey and Mouser, drop-in alternatives within the PIC16C family, and practical design notes not aggregated in the manufacturer datasheet.
جێگرەوەکانی جێگۆڕکێ بۆ PIC16C62BT-20/SS — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC16C62BT-20/SS (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Program Memory Type, RoHS Status, ADC, Core Architecture.
PIC16C62B-20I/SS
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC16C62B-20E/SS
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC16C62B-20/SS
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16C622-20/SS
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16F88-I/SS
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16C62BT-20/SS زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Core Architecture | 8-bit PIC RISC (mid-range, 14-bit instruction word) |
| Family | PIC16C |
| زۆرترین فرێکوێنسیی کاتژمێر | 20 MHz |
| Program Memory Type | OTP (One-Time Programmable) |
| Program Memory Size | 3.5 KB (2K x 14) |
| RAM Size | 128 bytes (128 x 8) |
| Number of I/O Pins | 22 |
| ڤۆڵتیەی دابینکردن | 3.0 V to 5.5 V |
| پاکێج | 28-SSOP (209 mil) |
| جۆری دامەزراندن | Surface Mount |
| پلەی گەرمیی کارکردن | 0 C to +70 C (Commercial) |
| Terminal Form | Gull Wing |
| Number of Terminals | 28 |
| Package Code | SSOP |
| AEC-Q100 | Not qualified (commercial grade) |
ڕێکخستنی پینی PIC16C62BT-20/SS
| پین 1 | MCLR — Master Clear (Reset) input, active low |
| پین 2 | RA0/AN0 — Port A bit 0 / Analog input 0 |
| پین 3 | RA1/AN1 — Port A bit 1 / Analog input 1 |
| پین 4 | RA2/AN2/VREF- — Port A bit 2 / Analog input 2 / ADC reference negative |
| پین 5 | RA3/AN3/VREF+ — Port A bit 3 / Analog input 3 / ADC reference positive |
| پین 6 | RA4/T0CKI — Port A bit 4 / Timer0 clock input (open drain) |
| پین 7 | RA5/SS/AN4 — Port A bit 5 / SPI slave select / Analog input 4 |
| پین 8 | VSS — Ground reference |
| پین 9 | OSC1/CLKIN — Oscillator crystal input / external clock input |
| پین 10 | OSC2/CLKOUT — Oscillator crystal output / clock output |
| پین 11 | RC0/T1OSO/T1CKI — Port C bit 0 / Timer1 oscillator output / Timer1 clock input |
| پین 12 | RC1/T1OSI/CCP2 — Port C bit 1 / Timer1 oscillator input / CCP2 output |
| پین 13 | RC2/CCP1 — Port C bit 2 / Capture Compare PWM 1 output |
| پین 14 | RC3/SCK/SCL — Port C bit 3 / SPI clock / I2C clock |
| پین 15 | RC4/SDI/SDA — Port C bit 4 / SPI data in / I2C data |
| پین 16 | RC5/SDO — Port C bit 5 / SPI data out |
| پین 17 | RC6/TX/CK — Port C bit 6 / USART asynchronous transmit / synchronous clock |
| پین 18 | RC7/RX/DT — Port C bit 7 / USART asynchronous receive / synchronous data |
| پین 19 | VSS — Ground reference |
| پین 20 | VDD — Positive supply voltage (3.0 V to 5.5 V) |
| پین 21 | RB0/INT — Port B bit 0 / External interrupt input |
| پین 22 | RB1 — Port B bit 1 |
| پین 23 | RB2 — Port B bit 2 |
| پین 24 | RB3/PGM — Port B bit 3 / Low-voltage programming input |
| پین 25 | RB4 — Port B bit 4 (interrupt-on-change) |
| پین 26 | RB5 — Port B bit 5 (interrupt-on-change) |
| پین 27 | RB6/PGC — Port B bit 6 / ICSP clock / interrupt-on-change |
| پین 28 | RB7/PGD — Port B bit 7 / ICSP data / interrupt-on-change |
بەکارهێنانە باوەکان
PIC16C62BT-20/SS گونجاوە بۆ 7 بەکارھێنانs: Appliance Control (White Goods), Motor Drive Signal Conditioning, Industrial Sensor Interface Modules, Automotive Body Electronics (Legacy), Legacy Embedded System Maintenance, HVAC Control Panels, Point-of-Sale Peripherals.
Appliance Control (White Goods)
The PIC16C62BT-20/SS fits appliance control boards where a low-cost 8-bit MCU manages relays, triac-driven AC loads, and user keypad inputs. Its 22 I/O pins are sufficient for washing machine controllers (motor on/off, door lock, water valve, buzzer, display segments), and the 20 MHz clock provides ample throughput for state-machine firmware with deterministic timing. The OTP memory makes it well suited to high-volume production runs where firmware is finalized and unit cost dominates BOM. Pair it with the ULN2003A relay driver for 7-channel AC load control. Operating temperature of 0C to +70C covers indoor appliance enclosures.
پێشنیارکراو
Motor Drive Signal Conditioning
The PIC16C62BT-20/SS serves as a signal-conditioning and supervisory controller in small DC motor drive boards, generating PWM signals via its CCP module for H-bridge gate drivers and reading Hall-effect sensors for closed-loop speed feedback. With a 20 MHz instruction cycle (200 ns per instruction), it can sample and respond to commutation events within microseconds, critical for BLDC and stepper motor control. The 128-byte RAM supports small PID lookup tables. Pair with DRV8871 H-bridge driver and back-EMF sensing front-end.
پێشنیارکراو
Industrial Sensor Interface Modules
The PIC16C62BT-20/SS is used in industrial sensor interface modules that digitize analog signals and forward them over RS-232/RS-485 networks via the integrated USART. Its 8-bit ADC-free design (relies on external sigma-delta or SAR ADC) suits modular I/O designs where signal conditioning is handled externally. The 22 I/O pins drive status LEDs, address selectors, and digital isolators. The 3.0-5.5 V supply aligns with industrial 24V bus systems after step-down to 5 V via LM2596.
پێشنیارکراو
Automotive Body Electronics (Legacy)
While not AEC-Q100 qualified, the PIC16C62BT-20/SS has been deployed in commercial-grade automotive body modules such as window lift controllers, seat position memories, and auxiliary lighting timers where automotive certification was grandfathered. Designers targeting new automotive designs should select AEC-Q100-qualified PIC16F variants instead. The 22 I/O pins interface with LIN bus transceivers and MOSFET drivers. Verify temperature grade suitability before deployment.
پێشنیارکراو
Legacy Embedded System Maintenance
The PIC16C62BT-20/SS is a target for legacy embedded system maintenance, where decades-old industrial controllers, scientific instruments, and HVAC units require spare parts for repair. The NRND status means new production runs are still supported for service continuity, but the OTP memory prevents firmware updates - replacement boards must use identical programmed parts. Stockpile recommendations: maintain 6-12 months of inventory for critical legacy systems.
پێشنیارکراو
HVAC Control Panels
The PIC16C62BT-20/SS operates in commercial HVAC control panels that drive 7-segment displays, scan keypads, and control fan/blower speeds via triac phase-angle control. Its 20 MHz instruction rate easily handles display multiplexing (8-digit refresh) and zero-cross detection for triac firing, while the 128-byte RAM stores schedule tables and setpoint histories. The OTP memory prevents field tampering of factory-calibrated control algorithms. Pair with MOC3041 zero-cross triac drivers and DS1307 RTC for time-of-day scheduling.
پێشنیارکراو
Point-of-Sale Peripherals
The PIC16C62BT-20/SS serves in point-of-sale peripherals such as barcode scanner interfaces, receipt printer controllers, and customer display drivers, where its USART handles barcode wand input and the CCP module generates precise stepper motor pulses for paper feed. The 22 I/O pins connect to multiple peripherals (keypad, buzzer, LEDs, RS-232). Cost-effective OTP memory suits high-volume POS deployments where the unit price is sensitive.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ PIC16C62BT-20/SS — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | PIC16C62B-20I/SS | PIC16C62B-20E/SS | PIC16F88-I/SS |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-SSOP | 28-SSOP - same | 28-SSOP - same | 28-SSOP - same |
| Program Memory Type | OTP 3.5 KB | OTP 3.5 KB | OTP 3.5 KB | Flash 4 KB (reprogrammable) |
| RAM Size | 128 bytes | 128 bytes | 128 bytes | 368 bytes |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| I/O Pins | 22 | 22 | 22 | 16 (multiplexed with ADC) |
| Operating Temperature | 0 C to +70 C (Commercial) | -40 C to +85 C (Industrial) | -40 C to +125 C (Extended) | -40 C to +85 C (Industrial) |
| Lifecycle Status | NRND | NRND | NRND | Active |
جیاکەرەوە سەرەکییەکان
- Identical die in commercial temperature grade with tape-and-reel packaging (بەراورد بەPIC16C62B-20/SS)
- Industrial temperature grade for harsh environments (بەراورد بەPIC16C62B-20I/SS)
- Flash-based modern equivalent with active lifecycle (بەراورد بەPIC16F88-I/SS)
تێبینییەکانی دیزاین
Place a 10 uF tantalum or aluminum bulk capacitor and a 0.1 uF ceramic decoupling capacitor within 5 mm of the VDD pin (pin 20) to suppress switching noise. Add a second 0.1 uF ceramic near pin 19 (VSS) to provide a low-impedance return path. The PIC16C62BT-20/SS draws less than 2 mA typical at 5 V/20 MHz but peaks during CCP/PWM transitions can reach 30 mA - bulk decoupling prevents VDD sag that triggers brown-out reset.
The PIC16C62B uses OTP (One-Time Programmable) memory - once programmed, it cannot be erased or rewritten. Production programming must be verified on the first attempt; any firmware bug becomes a bricked part. For prototypes or field-updatable designs, choose the Flash-based PIC16F88-I/SS in the same SSOP-28 footprint. Also note that the CONFIG bits (oscillator selection, watchdog, brown-out) are part of the OTP image and must be set correctly during programming.
The 28-SSOP package has a 0.65 mm pin pitch - design the PCB land pattern per IPC-7351 (SSOP-28 standard) and ensure solder mask slivers are at least 0.2 mm wide to prevent bridging. Route the oscillator traces (OSC1/OSC2) as short as possible (under 10 mm) and guard them with a ground pour to minimize EMI. Keep the MCLR trace short and route the MCLR pull-up (typically 10 kOhm to VDD) directly to the ICSP connector for in-circuit programming access.
زانیاری پابەندبوون
PIC16C62BT-20/SS is commercial temperature grade, not AEC-Q100 qualified. Compliance fields are marked unknown because the verified web data and internal database do not contain explicit RoHS/REACH/lead-free declarations - request confirmation from Microchip or authorized distributor before procurement.