PIC16F1454-I/P - 8-Bit 48MHz USB MCU | Microchip | 14-PDIP
MPN: PIC16F1454-I/P ✓ چالاکPIC16F1454-I/P گشتی
A microcontroller is a programmable semiconductor that combines a CPU core, memory, I/O ports, and peripherals on one integrated circuit. The PIC16F1454 belongs to the enhanced mid-range PIC16 family, where a RISC-inspired core executes 49 instructions from a 16-level stack. Its integration reduces component count by combining control logic, communication peripherals, and program storage in one device.
The 48 MHz internal oscillator supports faster instruction execution than many entry-level 8-bit MCUs, while the 14 KB Flash area provides room for application code and bootloader logic. The 128-byte high-endurance Flash data area can retain frequently changed configuration values without consuming ordinary RAM. The device also provides I2C and SPI peripherals for connected sensors, displays, and external data storage.
The integrated USB 2.0 module is the primary functional distinction of this device. USB clock recovery allows communication with a host that can provide or recover timing, while the PIC16 core handles application processing and general-purpose I/O. This combination is useful in compact USB-connected peripherals that do not need a higher-cost 32-bit processor. The exact USB operating details and electrical limits should be confirmed in the manufacturer data sheet before board release.
Typical uses include USB-connected data acquisition, compact control panels, HID peripherals, industrial interface modules, and educational USB development systems. Designers can also use the 12 I/O pins for LEDs, logic inputs, switch controls, and external peripheral signaling. Because the device is a general-purpose MCU, its suitability ultimately depends on code size, USB bus behavior, peripheral requirements, and available board area.
Designers should review the pin-description table, decoupling requirements, clock configuration options, and USB signal-routing guidance in the Microchip data sheet. A 14-pin PDIP package favors through-hole prototyping and repair, but its lead pitch and larger footprint are less compact than surface-mount alternatives. Confirm regulator accuracy, startup behavior, and required I/O voltage levels against the selected external circuitry.
This product record combines the exact orderable MPN, memory and timing characteristics, USB feature information, packaging details, application guidance, and engineering checks needed to evaluate the PIC16F1454-I/P as a drop-in replacement candidate on a 14-pin DIP PCB.
جێگرەوەکانی جێگۆڕکێ بۆ PIC16F1454-I/P — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC16F1454-I/P (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, ADC, Core Architecture, I/O Pins, PWM Modules.
PIC16LF1454-I/P
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC16F1454-I/P زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 8-bit Flash microcontroller |
| CPU Architecture | Enhanced mid-range PIC16 RISC core |
| Maximum Internal Clock Frequency | 48 MHz |
| Instruction Execution Time | 200 ns |
| Instruction Set Size | 49 instructions |
| Stack Levels | 16 levels |
| Flash Program Memory | 14 KB (8K x 14) |
| Data RAM | 1 KB |
| High Endurance Flash Data Storage | 128 bytes |
| General-Purpose I/O | 12 I/O pins |
| USB Interface | USB 2.0 module with host clock recovery |
| Serial Interfaces | MI2C and SPI modules |
| Internal Oscillator | 48 MHz |
| مەودای پلەی گەرمیی کارکردن | -40°C to +85°C |
| پاکێج | 14-pin PDIP |
| جۆری دامەزراندن | Through-hole |
| Flash Self-Read/Write | Supported |
ڕێکخستنی پینی PIC16F1454-I/P
| پین 1 | RE3/MCLR/VPP — Digital input/output RE3, master clear reset input, and programming voltage input |
| پین 2 | RA5 — General-purpose digital input/output RA5 |
| پین 3 | RE0 — General-purpose digital input/output RE0 |
| پین 4 | RA2 — General-purpose digital input/output RA2 |
| پین 5 | RA1 — General-purpose digital input/output RA1 |
| پین 6 | RA0 — General-purpose digital input/output RA0 |
| پین 7 | RC0 — General-purpose digital input/output RC0 |
| پین 8 | RC1 — General-purpose digital input/output RC1 |
| پین 9 | RC2 — General-purpose digital input/output RC2 |
| پین 10 | VDD — Positive device power supply |
| پین 11 | VSS — Device ground |
| پین 12 | RA4 — General-purpose digital input/output RA4 |
| پین 13 | RA3 — General-purpose digital input/output RA3 |
| پین 14 | RC4 — General-purpose digital input/output RC4 |
بەکارهێنانە باوەکان
PIC16F1454-I/P گونجاوە بۆ 6 بەکارھێنانs: USB HID Control Peripherals, Industrial Sensor Interface Module, USB Data Acquisition Device, Embedded Control Panel, USB-to-Legacy Serial Adapter, Educational USB Controller.
USB HID Control Peripherals
The PIC16F1454-I/P fits compact USB HID products such as keypads, control panels, and configuration interfaces because it combines a USB 2.0 module with a 48 MHz enhanced mid-range core. Its 14 KB Flash supports device firmware, descriptor data, and routine HID reports, while 1 KB of RAM provides working space for buffers and state management. Twelve I/O pins can serve LEDs, switches, and logic signals. Use the on-board 48 MHz oscillator when external clock accuracy is unnecessary, and validate USB timing, bus-power requirements, and enumeration behavior against the Microchip data sheet before production.
پێشنیارکراو
Industrial Sensor Interface Module
The PIC16F1454-I/P is useful in industrial sensor interfaces that need local acquisition, control, and USB reporting without a higher-power processor. Its MI2C and SPI peripherals can connect compatible sensors, transceivers, or memory devices, while the 12 available I/O pins handle discrete inputs and actuator-control signals. The 128-byte high-endurance Flash area is suitable for small configuration records, and the 48 MHz core provides practical response time for polling and protocol handling. Keep industrial transients and grounding outside the MCU pins through appropriate protection and isolation circuitry.
پێشنیارکراو
USB Data Acquisition Device
The PIC16F1454-I/P can form the control core of a compact USB data-acquisition device because its USB module, 48 MHz clock, and 14 KB Flash support firmware plus buffered measurement workflows. I2C and SPI allow connection to sensors or external converters, while the available GPIO handles trigger, status, and alarm functions. The 1 KB RAM is sufficient for modest sample buffers, but designers should avoid high-rate tasks that require substantially more storage. Select external interface parts according to the required voltage, bandwidth, and isolation levels, and validate timing margins in the finished system.
پێشنیارکراو
Embedded Control Panel
The PIC16F1454-I/P suits small embedded control panels where a USB connection, local logic, and discrete user-interface inputs are needed. Its 12 GPIO pins can operate LEDs, pushbuttons, relays, and display-control signals, while MI2C or SPI can connect a suitable display or input device. The integrated USB 2.0 peripheral provides a convenient path for configuration, logging, or host control. Firmware should debounce mechanical inputs, debounce or latch external events appropriately, and account for the limited 1 KB RAM when designing menu and logging buffers.
پێشنیارکراو
USB-to-Legacy Serial Adapter
The PIC16F1454-I/P can control a compact USB-to-serial adapter because the MCU provides USB connectivity, a 48 MHz processing core, and I2C and SPI peripherals for configuration and external logic. A suitable level-shifted serial transceiver can connect the board to RS-232 or RS-485 equipment, while GPIO supports user indicators or hardware handshaking. The 14 KB Flash and 1 KB RAM are appropriate for protocol conversion, buffering, and configuration storage in moderate-throughput designs. Verify signal levels, isolation, baud-rate tolerance, and USB suspend behavior during system validation.
پێشنیارکراو
Educational USB Controller
The PIC16F1454-I/P is well suited to educational USB controller projects because it combines a familiar PIC16 core, on-chip Flash, USB 2.0, I2C, SPI, and a 48 MHz internal oscillator in an inspectable 14-pin PDIP package. Through-hole construction simplifies breadboard prototyping, student soldering, and repeated component replacement. Its 14 KB program area is adequate for demonstrations involving USB enumeration, GPIO control, sensor reads, and simple data logging. Use the manufacturer configuration guidance to set oscillator, watchdog, reset, and peripheral options, and include test points for debugging enumeration and signal behavior.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ PIC16F1454-I/P — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | PIC16LF1454-I/P |
|---|---|---|
| Package | 14-pin PDIP | 14-pin PDIP - same footprint |
| Brand | Microchip Technology | Microchip Technology |
| CPU Architecture | Enhanced mid-range 8-bit PIC16 core | Enhanced mid-range 8-bit PIC16 core |
| Maximum Internal Clock Frequency | 48 MHz | 48 MHz |
| Flash Program Memory | 14 KB | 14 KB |
| Data RAM | 1 KB | 1 KB |
| General-Purpose I/O | 12 I/O pins | 12 I/O pins |
| USB Interface | USB 2.0 with host clock recovery | USB 2.0 with host clock recovery |
| Operating Voltage | 1.8 V to 5.5 V | 1.8 V to 3.6 V |
| Operating Temperature Range | -40°C to +85°C | -40°C to +85°C |
جیاکەرەوە سەرەکییەکان
- Broader supply-voltage operating range (بەراورد بەPIC16LF1454-I/P)
- Exact mechanical fit for 14-pin through-hole designs (بەراورد بەPIC16LF1454-I/P)
- USB connectivity with useful general-purpose resources (بەراورد بەPIC16LF1454-I/P)
تێبینییەکانی دیزاین
Place the device supply capacitor directly between VDD and VSS, with the ground connection following the manufacturer pin-layout and decoupling guidance. Confirm that the external supply remains within the operating range across USB attachment, bus-power changes, and the -40°C to +85°C temperature range. The 3.3 V maximum rating of the closest alternative makes supply voltage a mandatory check rather than a minor substitution detail.
Keep the USB data and power routing short, follow the Microchip USB layout guidance, and provide the required 22-ohm series damping resistors where specified by the device configuration. Route USB signals away from oscillator-sensitive analog inputs and switching nodes. The 14-pin PDIP package gives generous lead spacing, but the socket or connector geometry still needs inspection to prevent mechanical shorts or unstable USB insertion.
Do not treat a same-family or same-pin-count device as a drop-in MCU without checking configuration words, port multiplexing, USB clocking, and peripheral availability. MCLR/VPP shares a multifunction pin, and several port pins have analog or comparator-related functions. Program the correct oscillator and peripheral configuration, test startup with the intended supply ramp, and verify unused inputs against the pin-description table before releasing a production PCB.
زانیاری پابەندبوون
No explicit compliance declarations were identified in the cited product and distributor records. Confirm the current declarations for the exact orderable MPN with the manufacturer before production release.