PIC16F1519-I/P - 20MHz 8-Bit 28KB Flash MCU | Microchip Technology
MPN: PIC16F1519-I/P ✓ چالاکPIC16F1519-I/P گشتی
A PIC16-family microcontroller is an embedded processing device that combines a CPU core, program memory, data memory, and peripherals on one integrated circuit. The enhanced mid-range PIC16 architecture uses RISC-style instructions, a 16-level hardware stack, and an integrated oscillator with internal clock sources. PIC16 devices are widely used for compact control systems because they combine low component count, flexible peripheral integration, and straightforward in-circuit programming.
The PIC16F1519 distinguishes itself through 16K by 14 words of flash program memory and a 200 ns instruction execution capability. Its 10-bit ADC provides 28 channels for analog measurement, while two PWM modules and three timers support motor control, dimming, periodic sensing, and general timing tasks. Brown-out detection, power-on reset, and a watchdog timer provide baseline system supervision for industrial and consumer control designs.
The device operates from 1.8 V to 5.5 V and is specified over a -40°C to +85°C temperature range. Its 36 available I/O lines give designers more external signal access than smaller 28-pin members of the PIC16F151x family. A 40-pin PDIP package also simplifies prototyping and through-hole assembly where a surface-mount land pattern is unnecessary.
Typical applications include industrial sensor controllers, motor and valve drivers, LED lighting control, environmental monitoring equipment, appliance control panels, and compact embedded data-acquisition modules. In designs where the analog-to-digital converter, PWM channels, and communication interfaces operate concurrently, the larger pin count reduces the need for external multiplexers or interface expanders.
When laying out a board, keep decoupling capacitors close to the supply pins, route oscillator and programming signals away from sensitive analog inputs, and confirm that every used I/O line supports the intended direction and peripheral function. The -I temperature grade supports the -40°C to +85°C range, while the /P suffix identifies the through-hole 40-pin package.
This page combines the manufacturer's key device specifications with application guidance, drop-in replacement analysis, comparison parameters, and practical PCB design notes. It helps engineers evaluate whether the PIC16F1519-I/P provides the required memory, analog resolution, timing resources, and package arrangement before beginning firmware and hardware development.
جێگرەوەکانی جێگۆڕکێ بۆ PIC16F1519-I/P — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC16F1519-I/P (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Operating Temperature, ADC, Timers, Communication.
PIC16F1518-I/P
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC16LF1519-I/P
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16LF1518-I/P
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC16LF1517-I/P
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16LF15376-E/P
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16F1519-I/P زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 8-bit flash microcontroller |
| زۆرترین فرێکوێنسیی کاتژمێر | 20 MHz |
| Program Memory Size | 28 KB (16K x 14 words) |
| RAM Size | 1024 bytes |
| ADC Resolution | 10-bit |
| ADC Channels | 28 channels |
| Operating Voltage Range | 1.8 V to 5.5 V |
| مەودای پلەی گەرمیی کارکردن | -40°C to +85°C |
| I/O Pin Count | 36 I/O lines |
| پاکێج | 40-pin PDIP |
| Timer Count | 3 timers |
| PWM Module Count | 2 PWM modules |
| Serial Interfaces | I2C and SPI |
| System Supervision | Brown-out detection, power-on reset, and watchdog timer |
| Instruction Execution Time | 200 ns |
| Hardware Stack Depth | 16 levels |
ڕێنمایی ڕێکخستنی پینی PIC16F1519-I/P 40-pin pdip
ڕێکخستنی پین بۆ PIC16F1519-I/P (پاکێجی 40-pin pdip). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ PIC16F1519-I/P.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
PIC16F1519-I/P گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor and Condition Monitoring, Motor, Valve, and Actuator Control, LED Lighting and Dimming Control, Environmental Data Acquisition, Appliance and HVAC Control, Programmable Logic and System Supervision.
Industrial Sensor and Condition Monitoring
The PIC16F1519-I/P suits distributed monitoring equipment that combines several analog inputs with local control and serial reporting. Its 10-bit ADC provides 28 channels, while 36 I/O lines leave adequate connection capacity for digital status inputs, alarm outputs, and sensor conditioning. The device operates from 1.8 V to 5.5 V, allowing it to run from regulated 5 V equipment or lower-voltage sensor nodes. Brown-out detection, power-on reset, and the watchdog timer support dependable field operation. At 20 MHz, the controller can sample sensors, filter readings, and transmit results over I2C or SPI without requiring a separate communications processor.
پێشنیارکراو
Motor, Valve, and Actuator Control
The PIC16F1519-I/P provides a practical control platform for small motors, solenoids, valves, and positioning actuators. Three timers and two PWM modules support pulse-width modulation for speed, position, or proportional valve control, while the 20 MHz clock allows responsive loop updates. Thirty-six I/O lines simplify connection of limit switches, position sensors, drivers, and status indicators. The MCU can also supervise a power stage through brown-out detection and use its watchdog timer to recover from stalled control loops. Designers should size transistor or MOSFET drive current from the external power stage rather than from MCU pins.
پێشنیارکراو
LED Lighting and Dimming Control
The PIC16F1519-I/P is well suited to multi-channel LED lighting systems that require accurate dimming and flexible control sequences. Two PWM modules can generate the required modulation waveforms, and the 1.8 V to 5.5 V operating range supports both low-voltage portable products and 5 V powered fixtures. The 36 available I/O lines make it practical to control multiple channels, buttons, occupancy sensors, and status indicators without an I/O expander. Firmware can implement fade ramps, thermal derating, and open-load feedback. Keep high-current LED drive transistors outside the MCU and provide a regulated supply sized for the complete lighting load.
پێشنیارکراو
Environmental Data Acquisition
The PIC16F1519-I/P can serve as the acquisition controller in environmental equipment for temperature, humidity, light, gas, or soil-moisture monitoring. Its 28-channel 10-bit ADC supports multiplexed analog front ends, while the 1024 bytes of RAM accommodate calibration tables and short measurement histories. The microcontroller's low 1.8 V operating floor is useful for battery-powered field nodes, and I2C or SPI provides a path to external sensors or radio modules. Programmable timers support periodic sampling, and the watchdog timer can restart the acquisition loop after a software fault. Sensor-specific accuracy still depends on the external analog front end and calibration process.
پێشنیارکراو
Appliance and HVAC Control
The PIC16F1519-I/P fits appliance, heating, and ventilation controllers that combine digital controls with analog measurements. Timers and PWM channels can drive indicators, valves, or relays, while the ADC monitors temperature, pressure, or flow-sensor signals. Thirty-six I/O lines provide useful separation between user controls, display signals, and actuator outputs. The brown-out detector supports controlled recovery from supply disturbances, and the watchdog timer helps maintain long-running appliance logic. For safety-critical heating or refrigeration functions, implement redundant sensing and protective shutdown logic outside the MCU where required by the applicable product standard.
پێشنیارکراو
Programmable Logic and System Supervision
The PIC16F1519-I/P can act as a compact system supervisor or configurable logic controller in equipment with several discrete control functions. Its 36 I/O lines and multiple timers allow standalone sequencing of relays, lamps, alarms, and interlocks without a dedicated programmable-logic device. Flash program memory retains configuration logic through power cycles, and the 20 MHz operating rate supports faster state-machine execution than the slowest PIC16 choices. The watchdog timer, brown-out detection, and power-on reset provide basic fault containment. For designs needing higher logic density, dual I2C buses, or more memory, evaluate a larger PIC16 device instead.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ PIC16F1519-I/P — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | PIC16F1518-I/P | PIC16LF1519-I/P | PIC16LF1518-I/P | PIC16LF1517-I/P | PIC16LF15376-E/P |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 40-pin PDIP | 40-pin PDIP | 40-pin PDIP | 40-pin PDIP | 40-pin PDIP | 40-pin PDIP |
| Maximum Operating Voltage | 5.5 V | 5.5 V | 3.6 V | 3.6 V | 3.6 V | 3.6 V |
| Minimum Operating Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| Temperature Grade | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C |
جیاکەرەوە سەرەکییەکان
- Higher program memory than the closest lower-memory same-package candidate (بەراورد بەPIC16F1518-I/P)
- Supports a wider 5 V supply range than the LF-family alternatives (بەراورد بەPIC16LF1519-I/P)
- Provides substantially more RAM than the PIC16LF1517-E/P candidate (بەراورد بەPIC16LF1517-E/P)
- Combines a 40-pin through-hole package with 36 I/O lines (بەراورد بەPIC16LF15376-E/P)
تێبینییەکانی دیزاین
Place the supply decoupling capacitor directly between each VDD and VSS connection on the PCB, with a short and low-inductance return path to the device ground pins. Route the in-circuit programming and oscillator connections away from high-impedance analog inputs. Because the 40-pin PDIP exposes many I/O functions, group analog-sensitive pins near their analog components and keep switching-node copper separated from them.
Design the supply rail for the MCU and every attached peripheral, not only for the PIC16F1519-I/P alone. The device operates across 1.8 V to 5.5 V, but the selected regulator must also meet peripheral and I/O voltage requirements. Verify brown-out settings against the minimum rail required by the ADC and external sensors. Use separate filtering paths for analog measurement references and digital switching loads to limit supply noise.
Do not treat a same-package alternative as a functional equivalent without checking flash usage, RAM demand, voltage limits, timer mappings, ADC channels, and serial peripheral instances. The PIC16F1518-I/P reduces flash memory, while the LF-family candidates can restrict the supply voltage to 3.6 V. Re-run firmware builds, timing checks, and brown-out tests after any substitution, and confirm the physical pin numbering on the replacement.
Keep the 10-bit ADC front end close to the MCU and reference a stable voltage source. Route analog traces away from PWM outputs, relay drivers, and switching power-stage copper. For low-current sensor signals, use short traces, a defined analog ground strategy, and filtering appropriate to the sensor bandwidth. Sampling timing should allow the input to settle before the conversion is taken, particularly when the source impedance is high.
زانیاری پابەندبوون
No explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statement appears in the cited product information. The industrial temperature grade does not by itself indicate AEC-Q100 qualification.