PIC16F1769-I/P - 32MHz 8-Bit MCU with 10-Bit DAC | Microchip
MPN: PIC16F1769-I/P ✓ چالاکPIC16F1769-I/P گشتی
A microcontroller is a programmable integrated circuit that combines a CPU, memory, and peripherals on one semiconductor. Within the embedded-control hierarchy, the PIC16F1769 belongs to the 8-bit Flash MCU family and provides a low-complexity alternative to more resource-intensive processors. Its peripheral architecture reduces the need for separate analog and interface components while keeping firmware development accessible for industrial controls, instrumentation, and embedded products.
The PIC16F1769-I/P provides 14 KB of Flash memory, equivalent to 8K words of program storage, together with 1 KB of RAM for working data. The 32 MHz instruction-clock rate supports responsive control tasks, while the integrated 10-bit DAC provides a dedicated digital-to-analog conversion function. Intelligent analog integration and digital peripherals broaden the range of sensor-reading, waveform-control, and closed-loop applications that can be implemented on one device.
The industrial-temperature suffix I identifies the specified operating grade, while the P suffix denotes the 20-pin DIP package. This through-hole format supports prototyping, educational platforms, industrial controllers, and repair or upgrade assemblies where socketed components and straightforward routing are preferred. The 20-pin package also provides the conventional lead spacing and pin arrangement associated with the PIC16(L)F176X family.
Typical uses include digital thermometers, potentiometer and resistive-sensor interfaces, motor or valve supervisory controls, compact power supplies, analog process monitoring, and low-cost test fixtures. For each application, the 10-bit DAC can create an analog reference or control signal, while the 8-bit CPU executes acquisition, filtering, and supervisory logic. Designers should confirm the exact peripheral assignments, voltage limits, clock configuration, and pin multiplexing in the manufacturer datasheet before finalizing a board.
The main design consideration is careful budgeting of the 1 KB RAM and 14 KB program-memory footprint. Keep stack depth, buffers, and application state bounded, and place decoupling close to the supply pins. Because this is a mixed analog and digital MCU, define a clear grounding strategy and route sensitive sensor inputs away from high-current switching paths. This page combines manufacturer information, verified distributor facts, drop-in family alternatives, and practical selection guidance to support initial engineering evaluation.
جێگرەوەکانی جێگۆڕکێ بۆ PIC16F1769-I/P — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC16F1769-I/P (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, I/O Pins, ADC, DAC, Core.
PIC16F1768-I/P
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16F1765-I/P
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16F1764-I/P
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16LF1769-I/P
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC16LF1768-I/P
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC16F1769-I/P زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 8-bit Flash microcontroller |
| زۆرترین فرێکوێنسیی کاتژمێر | 32 MHz |
| Flash Program Memory | 14 KB (8K x 14 words) |
| Data Memory | 1 KB RAM |
| ADC Resolution | 10 bit |
| DAC Resolution | 10 bit |
| پاکێج | 20-pin DIP (P package) |
| جۆری دامەزراندن | Through-hole |
| Architecture | PIC 8-bit MCU |
| Program Memory Type | Flash |
| Analog Integration | 10-bit ADC, op amps, and zero-cross detection |
| دۆخی چرخەی ژیان | Active |
ڕێنمایی ڕێکخستنی پینی PIC16F1769-I/P 20-pin dip (p package)
ڕێکخستنی پین بۆ PIC16F1769-I/P (پاکێجی 20-pin dip (p package)). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ PIC16F1769-I/P.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
PIC16F1769-I/P گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor Acquisition, Digital Potentiometer Control, Closed-Loop Process Control, Motor and Valve Supervision, Programmable Test and Measurement, Power-Supply Auxiliary Controller.
Industrial Sensor Acquisition
The PIC16F1769-I/P fits compact sensor-acquisition modules that need local conversion, control logic, and programmable I/O without a separate processor. Its 10-bit ADC supports analog sensor measurement, while the 32 MHz clock and 1 KB RAM allow sampling routines, calibration values, filtering, and supervisory state to run locally. The 14 KB Flash store provides room for application firmware and an update-oriented boot structure. Place the device in the 20-pin DIP package when socketed serviceability and through-hole assembly are advantageous. Confirm the final ADC channel mapping, reference selection, input limits, and acquisition timing in the Microchip datasheet. Keep analog traces short, reference the analog ground deliberately, and decouple the supply pins close to the controller to reduce conversion noise.
پێشنیارکراو
Digital Potentiometer Control
The PIC16F1769-I/P is well suited to digital potentiometer and programmable-resistor control because it combines fast 8-bit processing with 10-bit analog conversion and a dedicated DAC. Firmware can determine a resistance or reference position from a control input, update the DAC, and supervise the resulting analog value. The 14 KB Flash capacity and 1 KB RAM are sufficient for modest control tables, calibration coefficients, and state handling, while the 20-pin DIP package simplifies bench prototyping. The 10-bit DAC can also provide a programmable reference for external analog circuitry. Validate the output range, settling time, and relevant peripheral pin assignments before layout release. Keep the DAC trace away from switching nodes and provide suitable output buffering when driving a higher-capacitance load.
پێشنیارکراو
Closed-Loop Process Control
The PIC16F1769-I/P can serve as the supervisory controller in a small closed-loop process-control assembly. The 10-bit ADC reads a feedback signal, the 32 MHz CPU executes the control law, and the 10-bit DAC generates an actuator or reference command. Its 14 KB Flash and 1 KB RAM support moderate algorithms, set-point tables, alarms, and operating counters without requiring a larger MCU. The DIP package is useful where field replacement and socketed maintenance are priorities. For stable operation, account for ADC resolution, DAC quantization, sensor noise, and control-loop delay. Verify the selected pin multiplexing and analog-reference requirements in the family datasheet, and isolate the analog section from relay or motor-driver switching paths.
پێشنیارکراو
Motor and Valve Supervision
The PIC16F1769-I/P can supervise compact motors, valves, relays, and solenoids when a separate high-current driver handles load switching. The MCU provides sequencing, limit-input monitoring, timed outputs, fault capture, and communication status using its digital peripherals. Its 32 MHz clock supports responsive debouncing and state-machine execution, while the 10-bit ADC can monitor a current or position feedback signal. The 20-pin DIP package is practical for prototypes and serviceable assemblies. The MCU should not drive high-current loads directly beyond the family's specified I/O limits. Use transistor or MOSFET interface stages, flyback protection for inductive loads, and a solid ground strategy. Confirm each I/O pin's available output function and drive rating in the manufacturer datasheet before assigning load-control functions.
پێشنیارکراو
Programmable Test and Measurement
The PIC16F1769-I/P is useful in compact test fixtures, signal generators, and educational instrumentation because it combines a 10-bit DAC, 10-bit ADC, Flash program memory, and configurable digital I/O in one controller. Firmware can generate low-level stimulus waveforms, measure the response, apply calibration, and present operating state through indicator outputs or an external interface. The 14 KB program store accommodates moderate test routines, while 1 KB RAM must be budgeted for samples and buffers. Through-hole DIP construction makes the device approachable for breadboard prototypes and socketed instruments. Establish a consistent grounding and reference strategy to prevent test-signal errors. Review DAC output characteristics and ADC acquisition requirements in the Microchip documentation, and add output attenuation or buffering where the intended signal level exceeds the direct device capability.
پێشنیارکراو
Power-Supply Auxiliary Controller
The PIC16F1769-I/P can coordinate auxiliary functions in a power system, including enable sequencing, fault monitoring, current sensing, and programmable reference generation. Its 10-bit ADC can observe a scaled supply or load signal, while the 10-bit DAC can create a control or reference voltage for an analog power stage. The 32 MHz processor provides enough responsiveness for supervisory logic, and the 14 KB Flash capacity accommodates state machines and fault handling. The 20-pin DIP package is useful in prototype power boards and test fixtures, although production designs may use a smaller package. Use external power transistors and magnetics rather than the MCU for high-energy switching. Verify supply tolerances, startup behavior, and analog-pin assignments in the manufacturer datasheet, and keep high-current return paths separate from the controller's reference ground.
پێشنیارکراو
داتای سەرچاوەی ئەندازیاری بۆ PIC16F1769-I/P — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | PIC16F1768-I/P | PIC16F1765-I/P | PIC16F1764-I/P | PIC16LF1769-I/P | PIC16LF1768-I/P |
|---|---|---|---|---|---|---|
| Package | 20-pin DIP (P package) | 20-pin DIP (P package) | 20-pin DIP (P package) | 20-pin DIP (P package) | 20-pin DIP (P package) | 20-pin DIP (P package) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Architecture | 8-bit PIC Flash MCU | 8-bit PIC Flash MCU | 8-bit PIC Flash MCU | 8-bit PIC Flash MCU | 8-bit PIC low-power Flash MCU | 8-bit PIC low-power Flash MCU |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Program Memory | 14 KB (8K x 14 words) | 7 KB (4K x 14 words) | 14 KB (8K x 14 words) | 7 KB (4K x 14 words) | 14 KB (8K x 14 words) | 7 KB (4K x 14 words) |
| RAM | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB |
| ADC Resolution | 10 bit | 10 bit | 10 bit | 10 bit | 10 bit | 10 bit |
جیاکەرەوە سەرەکییەکان
- Largest listed Flash allocation among the same-package family alternatives (بەراورد بەPIC16F1768-I/P)
- More program storage than the reduced-memory PIC16F1764 option (بەراورد بەPIC16F1764-I/P)
- Broader supply-voltage compatibility than the LF-family drop-ins (بەراورد بەPIC16LF1769-I/P)
- Integrated 10-bit DAC with 14 KB of Flash and 1 KB of RAM (بەراورد بەPIC16F1765-I/P)
تێبینییەکانی دیزاین
Place the supply-decoupling capacitor immediately between the relevant power and ground pins, with short, low-loop-area traces. Route analog inputs away from relay, motor, converter, and other switching-node paths. A single ground plane can work when current returns are controlled, but partition power-return currents so they do not flow underneath the ADC reference or sensitive sensor networks.
Budget firmware, stack, acquisition buffers, and control variables against the 1 KB SRAM limit, and review the 14 KB Flash allocation for application code, configuration data, and future updates. For the LF-family drop-in candidates, check the lower supply-voltage range before substitution; identical placement does not make an LF variant electrically equivalent to the target device.
Treat the 10-bit ADC and DAC as precision signals. Keep the analog reference and measurement paths short, avoid routing them beside high-current outputs, and provide a quiet return path to the MCU. If the DAC drives a load, verify its capacitive-drive capability and settling behavior and add a buffer when required instead of assuming the logic output can drive the target impedance directly.
Do not substitute solely because the package drawing matches. Check the exact ordered MPN, operating-voltage range, temperature grade, memory capacity, ADC and DAC availability, pin multiplexing, and programming configuration. The PIC16F1768 and PIC16F1764 variants have half the listed Flash capacity of the target, while LF-family parts can operate over a different voltage range; both conditions can require schematic or firmware changes.
زانیاری پابەندبوون
Compliance attributes were not stated in the manufacturer or distributor excerpts. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status with Microchip before production release.