PIC16F1827T-I/MV - 8-Bit 32MHz XLP Flash MCU | Microchip
MPN: PIC16F1827T-I/MV ✓ چالاکPIC16F1827T-I/MV گشتی
A microcontroller is a programmable integrated circuit that executes firmware, reads sensor inputs, controls digital outputs, and coordinates peripherals within an embedded system. The PIC16F1827 belongs to the PIC16 family of 8-bit reduced-instruction-set-computing microcontrollers, placing it within the broader category of embedded processors and embedded-control semiconductors. Its low-power XLP characteristics are particularly relevant to battery-operated, portable, and energy-conscious control products.
Key verified features include 32 MHz maximum clocking, 7 KB flash program memory, 384 bytes of RAM, 12 I/O ports, and an operating supply range of 2.5 V to 5.5 V. The manufacturer describes the device as part of the PIC XLP and mTouch families, while distributor listings identify 4K x 14-word flash organization and a 28-UQFN package with an exposed pad. These characteristics support compact control designs that require more than a basic logic device but do not require a high-performance 32-bit processor.
The PIC16 architecture provides an economical platform for event-based control, signal conditioning, communication, and peripheral management. A separate verified source also lists a 20 MHz clock speed, which should be reconciled against the 32 MHz device-family listing when setting operating-frequency limits for a specific design and revision. Flash memory supports in-circuit reprogramming, while the small UQFN package minimizes PCB area but requires careful escape routing and thermal-aware layout around its exposed pad.
Typical applications include capacitive-touch user interfaces, compact consumer controls, battery-powered accessories, sensor-conditioning nodes, lighting controls, and small industrial automation modules. The 12 available I/O ports are useful for digital interfaces, while the integrated flash and RAM resources can manage touch scanning, state machines, communication routines, and local control functions. For connected products, an external transceiver or microcontroller companion may be required because the verified data does not specify the target part's available communication peripherals in detail.
Designers should verify the exact pin assignments, exposed-pad connection, decoupling requirements, and maximum frequency limits against the current Microchip PIC16(L)F1826/27 Data Sheet before layout release. The small 4 x 4 mm UQFN package also limits hand-soldering accessibility and makes assembly-process capability important. Firmware should be tested at the intended voltage and temperature corners rather than inferred solely from the distributor summaries.
جێگرەوەکانی جێگۆڕکێ بۆ PIC16F1827T-I/MV — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC16F1827T-I/MV (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Program Memory (Flash), ADC, Core Architecture, I/O Pins.
PIC16F1827-I/MV
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16F1827T-I/MV زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 8-bit Flash Microcontroller |
| Maximum Clock Speed | 32 MHz |
| Alternative Listed Clock Speed | 20 MHz |
| Program Memory Type | Flash |
| Program Memory Size | 7 KB (4K x 14 words) |
| RAM Size | 384 bytes |
| I/O Port Count | 12 ports |
| Supply Voltage Range | 2.5 V to 5.5 V |
| Architecture | 8-bit PIC RISC |
| Low-Power Technology | nanoWatt XLP |
| Capacitive-Touch Support | mTouch |
| پاکێج | 28-UQFN (4 x 4 mm) with exposed pad |
| جۆری دامەزراندن | Surface Mount |
| دۆخی چرخەی ژیان | Active |
ڕێنمایی ڕێکخستنی پینی PIC16F1827T-I/MV 28-uqfn (4 x 4 mm) with exposed pad
ڕێکخستنی پین بۆ PIC16F1827T-I/MV (پاکێجی 28-uqfn (4 x 4 mm) with exposed pad). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ PIC16F1827T-I/MV.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
PIC16F1827T-I/MV گونجاوە بۆ 6 بەکارھێنانs: Capacitive-Touch User Interfaces, Battery-Powered Portable Controls, Compact Sensor-Control Nodes, LED Lighting and Appliance Controls, Small Communication Interface Modules, Compact Instrumentation and Control.
Capacitive-Touch User Interfaces
PIC16F1827T-I/MV fits capacitive-touch controls because Microchip identifies the device as an mTouch PIC16 XLP microcontroller with 12 I/O ports and operation from 2.5 V to 5.5 V. The 4K x 14-word flash space can hold touch-scanning routines, debounce logic, indicator control, and a compact application state machine, while 384 bytes of RAM provides working memory for measurements and status. Place sensitive touch traces away from switching nodes, follow the manufacturer's recommended sensing network, and verify the exact mTouch peripheral pins in the current data sheet. Its 28-UQFN 4 x 4 mm footprint also allows the controller to fit close to the touch-pad area, reducing trace sensitivity compared with a larger remote package.
پێشنیارکراو
Battery-Powered Portable Controls
PIC16F1827T-I/MV is appropriate for compact, battery-operated accessories that need low-power control without the overhead of a 32-bit processor. The MCU combines 7 KB of flash, 384 bytes of RAM, and a 2.5 V to 5.5 V supply range, while its XLP designation identifies nanoWatt low-power technology. A designer can use the PIC16 instruction set for button handling, display indication, sensor polling, and state management, then select the appropriate sleep configuration to reduce average current. Actual battery performance must be calculated from the duty cycle and verified current draw rather than inferred from the XLP label. The exposed pad and small package also require thermal-aware layout and an assembly process capable of handling the 4 x 4 mm UQFN footprint.
پێشنیارکراو
Compact Sensor-Control Nodes
PIC16F1827T-I/MV can act as the local controller in a small sensor-conditioning node because its 12 I/O ports provide dedicated digital interface resources and its flash memory supports self-contained acquisition and control firmware. The 8-bit PIC architecture is suitable for threshold decisions, filtering, calibration storage, and supervisory logic when a high-performance digital signal processor is unnecessary. The verified data confirms 7 KB flash, 384 bytes of RAM, and a 2.5 V to 5.5 V supply range, but it does not enumerate every sensing peripheral, so designers should select pins and configure analog functions from the manufacturer datasheet. Keep analog inputs away from fast-edge digital traces and validate converter or sensor timing in the finished board, especially when the node operates from a switching supply.
پێشنیارکراو
LED Lighting and Appliance Controls
PIC16F1827T-I/MV suits compact appliance and LED-control modules where a dedicated MCU must coordinate button input, indicators, timing, and actuator commands. Its 12 I/O ports support multiple digital connections, while 4K x 14 words of flash can store operating modes, debounce tables, fault handling, and power-sequencing logic. The 384-byte RAM is adequate for short-lived task state rather than large buffers. For LED applications, firmware can generate the required switching sequence while the MCU manages current through an external driver, avoiding reliance on unverified internal high-current outputs. Because the supplied data does not confirm PWM, comparator, or ADC availability for the exact package, those functions must be checked in the official data sheet before assigning a production design to this MCU.
پێشنیارکراو
Small Communication Interface Modules
PIC16F1827T-I/MV can serve as the supervisory controller in a small communication module that requires protocol handling, configuration, status reporting, and low-power management. The 8-bit PIC core and 7 KB flash capacity are adequate for compact protocol stacks and command processors, while the 12 I/O ports can support serial signaling and control signals. If the design uses an external radio or transceiver, the MCU should service interrupts, manage buffer flow, and provide a controlled startup sequence without exceeding the 384-byte RAM allocation. The verified data does not identify specific UART, SPI, or I2C resources for this exact ordering code, so engineers must verify the required peripheral and pin multiplexing in the manufacturer documentation. A prototype should also test communications across the full 2.5 V to 5.5 V supply range.
پێشنیارکراو
Compact Instrumentation and Control
PIC16F1827T-I/MV is suitable for compact instrumentation modules where local configuration, status LEDs, and simple control decisions are more important than high-throughput processing. The microcontroller's 4K x 14-word flash provides room for calibration parameters and embedded control code, while 384 bytes of RAM supports short command buffers and acquisition state. The 28-UQFN 4 x 4 mm package reduces board area in densely populated instruments, although the exposed-pad footprint and fine-pitch leads complicate manual rework. Designers should confirm the analog and timing peripheral assignments required by the instrument directly from the Microchip data sheet, because the verified distributor summaries do not provide a complete peripheral table. Production firmware should also include watchdog and reset handling for unattended field operation.
پێشنیارکراو
داتای سەرچاوەی ئەندازیاری بۆ PIC16F1827T-I/MV — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | PIC16F1827-I/MV |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 28-UQFN (4 x 4 mm) | 28-UQFN (4 x 4 mm) |
| Product Type | 8-bit Flash Microcontroller | 8-bit Flash Microcontroller |
| Ordering Format | T suffix, tape-and-reel format | Non-T suffix, tube format |
| Low-Power Family | PIC XLP with nanoWatt technology | PIC16F1827 family |
جیاکەرەوە سەرەکییەکان
- Compact 28-UQFN footprint (بەراورد بەPIC16F1827-I/MV)
- Production-oriented reel format (بەراورد بەPIC16F1827-I/MV)
- Low-power and touch-capable platform (بەراورد بەPIC16F1827-I/MV)
تێبینییەکانی دیزاین
Use the Microchip package drawing as the controlling source for the 28-UQFN 4 x 4 mm land pattern because the supplied distributor snippets contain conflicting dimensional descriptions. Confirm pad length, pitch, solder-mask opening, and exposed-pad geometry against the current package drawing. The exposed pad should be connected according to the manufacturer guidance and surrounded by a short, low-impedance ground path to support electrical return and heat spreading.
The verified operating range is 2.5 V to 5.5 V, so the power architecture must keep the MCU rail within its absolute-maximum and operating limits under transient conditions. Place local supply decoupling at the device pins with the smallest practical loop area and provide a clean source for analog or touch-sensitive circuitry. Where a switching converter feeds the MCU, validate startup sequencing, ripple sensitivity, and voltage droop at the actual 32 MHz operating condition.
Route sensitive mTouch, sensor, and other analog inputs away from switching-regulator nodes and high-current return paths. Keep the exposed-pad connection short and provide adequate thermal copper without obstructing the manufacturer's recommended soldering process. Because the verified summaries do not include the complete alternate-function map, finalize every pin assignment from the official pin table rather than inferring functions solely by port number.
Do not treat PIC16F1827T-I/MV and PIC16F1827-I/MV as interchangeable without confirming assembly packaging and purchasing conditions. The T suffix distinguishes tape-and-reel ordering from the tube-form ordering code. Electrical equivalence is expected within the same PIC16F1827 family, but the final procurement record, reel quantity, dry-packaging requirements, and manufacturer ordering information must be checked before changing the component on a released BOM.
زانیاری پابەندبوون
The supplied verified search results do not explicitly state the target part's RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. These fields remain unknown rather than being inferred from the manufacturer or package.