PIC16F1937T-I/MV - 32MHz 8-Bit 14KB Flash MCU | Microchip
MPN: PIC16F1937T-I/MV ✓ چالاکPIC16F1937T-I/MV گشتی
A microcontroller is a programmable integrated circuit that executes embedded control logic, manages digital inputs and outputs, and interfaces with sensors, displays, communications circuits, and actuators. Within the semiconductor hierarchy, the PIC16F1937 is an 8-bit RISC microcontroller, while the PIC16F193x family extends the PIC PIC XLP platform for low-power embedded designs. Its LCD-driver and nanoWatt features support compact, energy-conscious instruments and control panels.
The verified device data identifies a maximum clock speed of 32 MHz, 14KB Flash organized as 8K by 14 bits, 2.3 V to 5.5 V supply operation, and 25 I/O ports. The 40-UQFN package is 5x5 mm and is intended for surface-mount assembly. The target MPN includes the T temperature-grade ordering code and MV package identifier, while the I grade denotes the industrial temperature class. The device also includes 256 bits of EEPROM and an LCD driver.
In a typical measurement or industrial-control product, the PIC16F1937T-I/MV can acquire digital inputs, drive an LCD, operate communication peripherals, and control external circuitry from a single low-power MCU. Its 32 MHz clock speed provides processing headroom for protocol handling and control routines, while the 14KB Flash capacity provides room for application firmware and configuration code. The 25 available I/O ports reduce the need for external logic in designs with multiple discrete signals.
Typical uses include industrial panel meters, low-power environmental monitors, compact instrumentation, control interfaces, and consumer products requiring a small LCD display. The 2.3 V minimum operating voltage supports low-voltage designs, although the upper 5.5 V limit remains important when the MCU shares a supply with 5 V peripherals. The 40-UQFN footprint also supports dense board layouts where a larger SOIC package would be difficult to place.
Designers should verify the exact pin functions, exposed-pad connection, decoupling requirements, programming configuration, and peripheral assignments in the manufacturer datasheet before layout. Because the device combines an LCD driver with a compact exposed-pad package, PCB thermal-via placement and careful allocation of analog, digital, and LCD-drive signals are essential. The manufacturer documentation should also be used to confirm oscillator, watchdog, and power-management behavior for the selected firmware configuration.
This product record consolidates the verified manufacturer and distributor information, distinguishes the exact 40-UQFN ordering variant from other package options, and provides application guidance, specification caveats, and drop-in family alternatives for engineers evaluating the PIC16F1937T-I/MV.
جێگرەوەکانی جێگۆڕکێ بۆ PIC16F1937T-I/MV — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC16F1937T-I/MV (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, ADC, LCD Driver, Program Memory (Flash), Timers.
PIC16F1937-I/MV
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16F1938-I/MV
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16F1939-I/MV
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16F1938T-I/MV
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC16F1939T-I/MV
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC16F1937T-I/MV زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Microcontroller Type | 8-bit RISC flash-based microcontroller |
| Product Family | PIC16 XLP |
| Maximum Clock Speed | 32 MHz |
| Flash Memory | 14KB (8K x 14 bits) |
| EEPROM | 256 bits |
| Supply Voltage Range | 2.3 V to 5.5 V |
| I/O Port Count | 25 |
| LCD Driver | Yes |
| Low-Power Technology | nanoWatt technology |
| پاکێج | 40-UQFN (5x5 mm) |
| جۆری دامەزراندن | Surface Mount |
| Temperature Grade | Industrial grade |
| Program Memory Type | Flash |
| Core Architecture | 8-bit RISC |
| دۆخی چرخەی ژیان | Active |
ڕێنمایی ڕێکخستنی پینی PIC16F1937T-I/MV 40-uqfn (5x5 mm)
ڕێکخستنی پین بۆ PIC16F1937T-I/MV (پاکێجی 40-uqfn (5x5 mm)). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ PIC16F1937T-I/MV.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
PIC16F1937T-I/MV گونجاوە بۆ 6 بەکارھێنانs: Industrial Control Panel, Low-Power Environmental Monitor, Digital Panel Meter, Portable Measurement Instrument, Battery-Powered Sensor Interface, Compact Consumer Control Module.
Industrial Control Panel
The PIC16F1937T-I/MV fits compact industrial control panels because it combines 25 I/O ports, a 32 MHz clock, an LCD driver, and operation from 2.3 V to 5.5 V. It can manage front-panel buttons, status indicators, relay-control signals, and sensor inputs while driving a segment LCD. The 40-UQFN 5x5 mm package limits board footprint in densely populated operator interfaces, and the 14KB Flash provides room for menu logic, debounce routines, and communication handling. Engineers should budget exposed-pad layout carefully and validate LCD segment mapping against the exact pin configuration before fabrication.
پێشنیارکراو
Low-Power Environmental Monitor
The PIC16F1937T-I/MV is suitable for a low-power environmental monitor that periodically reads sensors and presents measurements on an LCD. Its nanoWatt technology supports low-power operation, while the 32 MHz processing rate can handle sensor acquisition, filtering, threshold logic, and data formatting between sleep intervals. The 2.3 V minimum supply voltage is useful for compact battery-powered designs, and 256 bits of EEPROM can retain a small amount of calibration or configuration information. The 40-UQFN footprint also reduces board area, although the exposed pad should be tied and thermally connected according to the manufacturer package guidance.
پێشنیارکراو
Digital Panel Meter
A digital panel meter can use the PIC16F1937T-I/MV to acquire a measurement, process it, and display the result without a separate LCD controller. The integrated LCD driver reduces the external component count, while 25 I/O ports leave capacity for a measurement front end, buttons, alarm outputs, and status LEDs. Its 14KB Flash capacity is sufficient for calibration tables, display formatting, averaging, and menu handling in many compact instruments. The 32 MHz clock supports responsive updates, and the 40-UQFN package is advantageous when the display and control electronics must fit into a small enclosure.
پێشنیارکراو
Portable Measurement Instrument
The PIC16F1937T-I/MV can serve as the controller in a portable measurement instrument where low supply voltage, compact packaging, and an integrated display interface are important. Its operation from 2.3 V to 5.5 V permits use with low-voltage energy sources and mixed-voltage peripheral networks, subject to careful supply design. The 25 I/O ports support switches, probes, status indicators, and data links, while 14KB Flash accommodates acquisition, conversion, and user-interface firmware. Designers should verify current consumption in each nanoWatt operating mode and ensure the 40-UQFN exposed pad is incorporated into the PCB thermal and ground design.
پێشنیارکراو
Battery-Powered Sensor Interface
For a battery-powered sensor interface, the PIC16F1937T-I/MV combines a 32 MHz 8-bit core, 25 I/O ports, and nanoWatt technology in a compact 40-UQFN package. It can wake a peripheral, acquire a sensor signal, apply filtering or threshold logic, and update a local display while minimizing active time. The 256-bit EEPROM is small but can hold limited identifiers or calibration parameters, so applications requiring extensive persistent data still need external nonvolatile memory. Power-path design, sleep-mode configuration, and wake-source behavior must be validated in firmware and measured on the final board.
پێشنیارکراو
Compact Consumer Control Module
The PIC16F1937T-I/MV can control a compact consumer module that combines local buttons, an LCD, and simple external actuators. Its 25 I/O ports provide flexibility for indicators, switches, and control outputs, while the integrated LCD driver supports a simple segment display without adding another dedicated controller. The 14KB Flash capacity accommodates finite-state-machine logic and device configuration, and the 32 MHz clock allows responsive interaction. The 2.3 V to 5.5 V operating range supports common low-voltage architectures. Firmware and pin assignment verification remain essential because multifunction peripherals can limit which I/O pins remain available for the user interface.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ PIC16F1937T-I/MV — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | PIC16F1937-I/MV | PIC16F1938-I/MV | PIC16F1939-I/MV | PIC16F1938T-I/MV | PIC16F1939T-I/MV |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 40-UQFN (5x5 mm) | 40-UQFN (5x5 mm) - same package | 40-UQFN (5x5 mm) - same package | 40-UQFN (5x5 mm) - same package | 40-UQFN (5x5 mm) - same package | 40-UQFN (5x5 mm) - same package |
جیاکەرەوە سەرەکییەکان
- Integrated LCD driver reduces display-system component count (بەراورد بەATMEGA328P-MUR)
- Lower-voltage operation supports compact embedded systems (بەراورد بەPIC16F1937-I/MV)
- Compact 5x5 mm footprint supports dense control-panel layouts (بەراورد بەPIC16F1937-I/PT)
- 32 MHz processing headroom with 14KB Flash (بەراورد بەATMEGA328P-MUR)
تێبینییەکانی دیزاین
Design the 40-UQFN footprint from the exact manufacturer package drawing rather than a generic QFN footprint. Keep the exposed-pad copper area unobstructed and connect it to the required ground or pad net as specified by the datasheet. Place input and output decoupling capacitors close to their associated pins, and verify the final land pattern against the 5x5 mm body and exposed-pad dimensions before fabrication.
The UQFN exposed pad is important for heat transfer from the microcontroller. Use a compact multilayer PCB where practical, add thermal vias only where they do not violate the manufacturer's land-pattern guidance, and avoid long thermal-via stubs if the design uses filled or capped vias. Validate junction temperature under the maximum expected ambient and operating frequency because the verified search data does not provide a thermal-resistance figure.
The device operates from 2.3 V to 5.5 V, so the power architecture must preserve that range at every IC pin. Check startup ramp time, brownout behavior, and the current drawn when the 32 MHz clock and LCD outputs are active. Place bulk and bypass capacitance near the supply pins and keep noisy switching or display-driver return currents from sharing sensitive paths with the MCU supply.
Do not infer a drop-in replacement solely from the 40-UQFN package name. The 25 I/O pins can be reassigned to the LCD, serial interfaces, oscillator functions, and other on-chip peripherals, so software and board-level net assignments may change even when the physical package matches. For every alternative, compare the pin package chart, peripheral mapping, voltage limits, timing behavior, programming configuration, and exposed-pad connection before approving a substitution.
زانیاری پابەندبوون
The supplied verified search data does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for the exact MPN. The package ordering code is not treated as proof of any compliance claim.