Microchip Technology

PIC16F1939-I/P - 32MHz 8-Bit XLP MCU | Microchip

MPN: PIC16F1939-I/P ✓ چالاک
1.8 V to 5.5 V Vdss 40-pin PDIP Package 32 MHz Speed 28 KB (16K × 14 words) Memory
MOQ: 1 |

PIC16F1939-I/P گشتی

The Microchip Technology PIC16F1939-I/P is an 8-bit PIC XLP flash microcontroller with a 32 MHz operating frequency, 28 KB of flash program memory, 1 KB of RAM, and 256 bytes of EEPROM in a 40-pin PDIP package. The -I suffix identifies the industrial temperature grade, while /P identifies the through-hole PDIP package. Its operating supply range of 1.8 V to 5.5 V supports low-voltage embedded systems that need flexible power-supply design.

A PIC microcontroller is an 8-bit reduced-instruction-set computer integrated with flash memory, data RAM, EEPROM, timers, communication peripherals, and general-purpose I/O. Within the embedded-control hierarchy, the PIC16F1939 belongs to the enhanced mid-range PIC16 family and uses the low-power XLP feature set. These devices bridge simple discrete logic and more capable 32-bit microcontrollers while retaining a compact instruction set and straightforward peripheral architecture.

Principal device features include 28 KB of flash memory organized as 16K × 14 program words, 1 KB of SRAM, and 256 bytes of nonvolatile data EEPROM. The MCU operates up to 32 MHz and supports a 1.8 V to 5.5 V supply range. Its integrated LCD capability is useful for local human-machine interfaces, while its I/O, timers, serial interfaces, and analog resources allow a single controller to manage sensors, actuators, displays, and communications.

The enhanced mid-range architecture provides an 8-bit execution engine with a hardware stack and direct, indirect, and relative addressing modes. Flash memory permits in-circuit reprogramming, and EEPROM preserves calibration values or configuration parameters when the main supply is removed. Peripherals are distributed across the 40-pin PDIP footprint, which also exposes programming, reset, clock, power, and communication functions for a conventional development board.

Typical uses include industrial control panels, compact energy meters, environmental monitoring equipment, LED-display controllers, instrumentation interfaces, and small consumer appliances. The XLP orientation is particularly appropriate for battery-powered or duty-cycled products that spend substantial time between active processing periods. Its LCD driver can reduce the need for external display-control hardware in products with a small character or segment display.

When designing a PCB, provide a regulated supply with adequate bypass capacitance near VDD and VSS pins and route programming signals for reliable in-circuit programming. Confirm oscillator, reset, and I/O levels against the pin-description table in the Microchip datasheet. The 40-pin through-hole package simplifies prototyping and manual assembly but occupies more board area than the equivalent surface-mount variants.

This page combines the PIC16F1939 technical profile, verified package information, same-package replacement guidance, application-focused engineering guidance, and a parameter comparison intended to accelerate initial design review and sourcing.

جێگرەوەکانی جێگۆڕکێ بۆ PIC16F1939-I/P — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC16F1939-I/P (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package.

Microchip Technology
Package: 40-pin PDIP (0.600" / 15.24 mm)

PIC16F1939-E/P

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 40-pin PDIP
PIC16 Enhanced Mid-Range (8-bit) · 14-bit · 28 KB (16K x 14 words) · 1 KB · 256 bytes · 32 MHz · 125 ns at 32 MHz · 2.3 V to 5.5 V

پەیوەندی بۆ نرخ

بینینی داتاشیت →

PIC16F1939T-E/P

✅ جێگرەوەی ڕاستەوخۆ
📦 40-pin PDIP
Same 28 KB flash, 1 KB RAM, 256-byte EEPROM, 32 MHz clock, and 40-pin PDIP footprint; alternate T qualification code with -E temperature grade extending to +125 °C.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

ℹ️ 1 بەش(ەکان)ی پاکێجی جیاواز شاردراوەتەوە — پاکێجی جیاواز پێویستی بە دووبارەکردنەوەی PCB ھەیە و جێگرەوەیەکی ڕاستەقینەی جێگۆڕکێ نییە. پەیوەندیمان پێوە بکە ئەگەر پێویستت بە پێشنیاری پاکێجی جیاواز ھەبوو.

PIC16F1939-I/P زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Microcontroller Type 8-bit RISC flash microcontroller
Maximum CPU Frequency 32 MHz
Program Memory 28 KB (16K × 14 words)
Data RAM 1 KB
EEPROM 256 bytes
ڤۆڵتاژی دابینکردنی کارکردن 1.8 V to 5.5 V
Supported Supply Configurations 2.5 V, 3.3 V, and 5 V
پاکێج 40-pin PDIP
ژمارەی پین 40 pins
جۆری دامەزراندن Through-hole
Product Family PIC16 XLP enhanced mid-range
Instruction Execution 200 ns
Program Memory Type Flash
مەودای پلەی گەرمیی کارکردن -40 °C to +85 °C

ڕێنمایی ڕێکخستنی پینی PIC16F1939-I/P 40-pin pdip

ڕێکخستنی پین بۆ PIC16F1939-I/P (پاکێجی 40-pin pdip). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 40-pin pdip بۆ PIC16F1939-I/P

هیچ داتای وردی پینئاوت بەردەست نییە بۆ PIC16F1939-I/P.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

PIC16F1939-I/P گونجاوە بۆ 6 بەکارھێنانs: Industrial Control Panels, Energy Metering, Environmental Monitoring, LED Display Controllers, Battery-Powered Instruments, Small Appliance Controllers.

🏭

Industrial Control Panels

The PIC16F1939-I/P is well suited to compact industrial control panels because its 32 MHz CPU provides responsive task execution while the 28 KB flash stores interface logic, sequencing routines, and diagnostic code. The 40-pin PDIP package is convenient for leaded assembly and serviceable control boards. Use the integrated LCD driver for local status information, digital I/O for switches and relays, and the 1.8 V to 5.5 V operating range to support 3.3 V or 5 V panel electronics.

⚡

Energy Metering

PIC16F1939-I/P can serve as the control processor in a compact energy-metering design that records consumption data, operates a local display, and communicates measurement results. Its 1 KB of RAM supports short acquisition buffers, while 256 bytes of EEPROM can retain calibration constants or a limited configuration record. The 32 MHz processing rate helps combine timing, sensing, display refresh, and communication tasks without requiring a higher-power processor in cost-sensitive equipment.

🧩

Environmental Monitoring

The PIC16F1939-I/P is appropriate for environmental monitoring equipment that periodically measures sensors, applies calibration, records exceptions, and drives a local display. Its low-power XLP heritage supports duty-cycled battery operation, while flash simplifies firmware updates and EEPROM preserves site-specific offsets. The 40-pin PDIP package also makes the controller practical for prototypes and moderately low-volume industrial sensing products where through-hole serviceability is valuable.

💡

LED Display Controllers

PIC16F1939-I/P can control LED or segment-display systems by combining display timing, button input, status indication, and serial communication in one microcontroller. The 32 MHz clock provides sufficient headroom for multiplexed display refresh, while 28 KB of flash accommodates display maps and user-interface logic. Its LCD-driver capability is particularly relevant to character and segment products, although the selected LCD glass must match the device's segment and common-drive configuration.

🔋

Battery-Powered Instruments

The PIC16F1939-I/P fits battery-powered instruments where energy-efficient operation, flexible voltage support, and local data retention are important. XLP operating modes can reduce activity between measurement events, and the 256-byte EEPROM retains setup values without continuous RAM use. At 3.3 V operation, the controller offers ample speed for low-rate sensing and display functions while avoiding the size and power demands of a more complex processor platform.

🔧

Small Appliance Controllers

PIC16F1939-I/P can coordinate motor timing, switches, sensors, indicators, and safety-related state checks in a small appliance controller. The 40-pin PDIP footprint provides ample external signal access, 28 KB flash supports structured firmware, and the EEPROM retains user settings or calibration values. Use the -E temperature variant only where the enclosure permits operation up to +125 °C; for typical room-temperature appliances, the -I grade covers -40 °C to +85 °C.

کورتەی بەرهەمە پێشنیارکراوەکان

What are the key specifications of PIC16F1939-I/P that engineers should know?
The PIC16F1939-I/P is a 32 MHz, 8-bit enhanced mid-range PIC16 microcontroller with 28 KB of flash memory, 1 KB of RAM, and 256 bytes of EEPROM in a 40-pin PDIP package. According to the Microchip PIC16(L)F1938/9 datasheet, it supports a 1.8 V to 5.5 V supply range and includes XLP low-power operation, an LCD driver, timers, serial interfaces, and analog peripherals. The industrial -I grade operates from -40 °C to +85 °C.
Where can I download the PIC16F1939 datasheet PDF?
The official PIC16F1939 datasheet PDF is available from Microchip at https://ww1.microchip.com/downloads/en/devicedoc/41574a.pdf. The document covers the PIC16(L)F1938/9 28-pin, 40-pin, and 44-pin devices and should be used to verify pin assignments, electrical limits, timing, peripheral operation, and package drawings. Use the device-specific pinout section for the 40-pin PDIP configuration.
Where can I find the PIC16F1939 pinout for the 40-pin PDIP package?
The PIC16F1939 pinout is located in the package and pin-description sections of the official Microchip PIC16(L)F1938/9 datasheet. For the PIC16F1939-I/P, use the 40-pin PDIP drawing and verify pin 1 orientation on the physical package. The MCU combines power, programming, oscillator, reset, LCD, analog, and general-purpose I/O functions, so the complete numbered pin table should be copied directly into the PCB schematic.
What is the operating voltage of PIC16F1939-I/P?
The PIC16F1939-I/P operates from 1.8 V to 5.5 V, allowing it to support 2.5 V, 3.3 V, and 5 V systems. According to the Microchip PIC16(L)F1938/9 datasheet, the exact clock and peripheral operating limits depend on the selected supply voltage and configuration. Keep the regulator within its stated tolerance and place local bypass capacitors close to the supply and ground pins.
How much memory does the PIC16F1939-I/P have?
The PIC16F1939-I/P contains 28 KB of flash program memory organized as 16K × 14 program words, 1 KB of data RAM, and 256 bytes of EEPROM. The Microchip PIC16(L)F1938/9 datasheet identifies flash memory for firmware and EEPROM for nonvolatile parameter storage. The RAM is suitable for working variables and short data buffers, while the EEPROM is intended for configuration or calibration values that must survive power loss.
What can replace the PIC16F1939-I/P?
The PIC16F1939-E/P is the closest same-package replacement because it retains the 40-pin PDIP footprint, 32 MHz architecture, 28 KB flash, 1 KB RAM, and 256-byte EEPROM while changing the temperature grade. The -E grade extends the upper temperature limit from +85 °C to +125 °C. Before substitution, confirm oscillator, analog, LCD, programming, and peripheral requirements in the Microchip datasheet.
Is PIC16F1939-E/P pin-compatible with PIC16F1939-I/P?
Yes, the PIC16F1939-E/P is pin-compatible with the PIC16F1939-I/P and uses the same 40-pin PDIP footprint. According to the Microchip PIC16(L)F1938/9 datasheet, the device retains the same 28 KB flash, 1 KB RAM, 256-byte EEPROM, 32 MHz maximum frequency, and 1.8 V to 5.5 V operating range. The principal distinction is the -E temperature rating of -40 °C to +125 °C versus the -I rating of -40 °C to +85 °C.
PIC16F1939-I/P vs PIC16F1939-E/P - which is better?
Choose the PIC16F1939-E/P for equipment exposed to temperatures above +85 °C or up to +125 °C; otherwise, the PIC16F1939-I/P is suitable for ordinary industrial environments rated to +85 °C. Both devices use the same 40-pin PDIP package and provide 28 KB flash, 1 KB RAM, 256-byte EEPROM, a 32 MHz maximum clock, and a 1.8 V to 5.5 V supply range. The choice therefore centers on temperature qualification rather than PCB redesign.
When should I choose PIC16F1939-I/P over PIC16F1939-E/P?
Choose the PIC16F1939-I/P when the assembly remains within -40 °C to +85 °C and the broader high-temperature qualification of the -E variant is unnecessary. The -I device retains the same 40-pin PDIP footprint, 32 MHz clock, 28 KB flash, 1 KB RAM, and 256-byte EEPROM as the PIC16F1939-E/P. This makes it suitable for controlled industrial enclosures, instrumentation, metering equipment, and compact embedded controllers.
Is PIC16F1939-I/P suitable for a low-power embedded controller?
The PIC16F1939-I/P is suitable for low-power embedded controllers because it belongs to the PIC16 XLP family and supports operation down to 1.8 V. Its 32 MHz execution rate provides useful processing headroom, while 1 KB of RAM and 256 bytes of EEPROM support local control and nonvolatile settings. Power consumption depends on the active clock, peripheral configuration, operating voltage, and duty cycle, so measure the final firmware behavior rather than relying on one nominal current figure.
What is the best drop-in replacement for PIC16F1939-I/P?
The Microchip PIC16F1939-E/P is the best same-footprint replacement identified for the PIC16F1939-I/P because both use the 40-pin PDIP package and retain the same core, memory capacities, clock rating, and supply range. The -E version supports temperatures up to +125 °C rather than +85 °C. A second qualified ordering code, PIC16F1939T-E/P, retains the same device rating and footprint. Confirm all board-level functions against the Microchip datasheet before production use.
Is PIC16F1939-I/P the same as PIC16F1939-I/PT?
No. The PIC16F1939-I/P and PIC16F1939-I/PT share the basic PIC16F1939 device function, but they use different packages. The -I/P version is supplied in a 40-pin PDIP through-hole package, while the -I/PT version uses a 44-pin TQFP surface-mount package. Because the footprints, pin counts, and pad arrangements differ, the -I/PT part is not a drop-in PCB replacement for a design built around -I/P.
What is the best Microchip equivalent for PIC16F1939-I/P?
The best Microchip equivalent depends on whether thermal qualification or a different package is required. For a true drop-in installation, the PIC16F1939-E/P and PIC16F1939T-E/P retain the 40-pin PDIP footprint and the PIC16F1939-I/P electrical configuration, with the -E grade extending operation to +125 °C. Cross-brand alternatives are not recommended because firmware, interrupt vectors, peripheral behavior, programming, and package details must all be independently verified.
Where can I buy PIC16F1939-I/P and check current lead time?
Use the Request a Quote form on this page to request PIC16F1939-I/P availability, current lead time, and an order quotation. The part is a 40-pin PDIP microcontroller, and its commercial terms should be confirmed for the requested quantity and delivery schedule. Do not substitute a surface-mount ordering code without redesigning the PCB, because the package pin count and land pattern differ.
How much does PIC16F1939-I/P cost and is it in stock?
Current pricing and stock for PIC16F1939-I/P should be obtained through the Request a Quote form on this page. The form allows quantity, target date, and shipment requirements to be included in the quotation request. Because production lead time and inventory can change independently of the device specification, request the current terms rather than relying on a historical catalog price or an unqualified starting-price figure.

داتای سەرچاوەی ئەندازیاری بۆ PIC16F1939-I/P — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the PIC16F1939-I/P for embedded products operating from -40 °C to +85 °C that use a 40-pin through-hole PCB, require 28 KB of flash, and need the LCD driver, XLP operation, timers, serial interfaces, and analog peripherals of the enhanced mid-range PIC16 family. Select the PIC16F1939-E/P when the same pinout is required but the product must operate as high as +125 °C. The PIC16F1939T-E/P provides another same-package qualified ordering option for that temperature range. Do not select the PIC16F1939-I/PT for an existing -I/P board because its 44-pin TQFP footprint requires new routing and a different land pattern. For a cross-brand replacement, use a PCB and firmware migration rather than assuming software, interrupt, programming, and peripheral compatibility.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە PIC16F1939-E/P PIC16F1939T-E/P
Package 40-pin PDIP 40-pin PDIP 40-pin PDIP
Brand Microchip Technology Microchip Technology Microchip Technology
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz
Flash Memory 28 KB (16K × 14 words) 28 KB (16K × 14 words) 28 KB (16K × 14 words)
Data RAM 1 KB 1 KB 1 KB
EEPROM 256 bytes 256 bytes 256 bytes
Operating Supply Voltage 1.8 V to 5.5 V 1.8 V to 5.5 V 1.8 V to 5.5 V
Temperature Grade -40 °C to +85 °C -40 °C to +125 °C -40 °C to +125 °C
Microcontroller Architecture 8-bit enhanced mid-range PIC16 8-bit enhanced mid-range PIC16 8-bit enhanced mid-range PIC16
Program Memory Type Flash Flash Flash

جیاکەرەوە سەرەکییەکان

  • Broader temperature qualification than the target (بەراورد بەPIC16F1939-I/P)
  • Drop-in upgrade path without PCB changes (بەراورد بەPIC16F1939-I/PT)
  • Industrial temperature coverage (بەراورد بەPIC16F1939-E/P)

تێبینییەکانی دیزاین

Design the supply for the PIC16F1939-I/P within the 1.8 V to 5.5 V operating range, and account for voltage-dependent clock and peripheral limits from the Microchip datasheet. Place the required local bypass capacitors close to the VDD and VSS connections, with short and low-inductance return paths. For battery-powered systems, use the XLP modes and measure the complete sleep, wake, sampling, and display cycle rather than estimating consumption from the active current alone.

Use the 40-pin PDIP pin-description table to assign oscillator, programming, reset, LCD, analog, and I/O functions before laying out the board. Keep sensitive analog inputs away from switching nodes and high-current return paths, provide a clean ground reference for the converter, and follow the datasheet recommendations for decoupling and external components. Confirm the physical pin-1 orientation so the controller is not installed in reverse during through-hole assembly.

Do not treat the PIC16F1939-I/PT as a direct substitute for the PIC16F1939-I/P: the former uses a 44-pin TQFP package and requires a different PCB footprint. When changing temperature grades, verify that the replacement remains -I or -E compatible with the product's environmental requirements. Also avoid enabling unused peripherals before a low-power measurement, because oscillator, comparator, ADC, LCD, and communication settings can materially change system power consumption.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

Compliance status is not explicitly stated for this ordering code. Confirm the current declarations for the exact assembled part with Microchip before regulatory submission.

داتا پشتڕاستکراوەتەوە لە: 2026-11-04 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

pic16f1939 datasheet pic16f1939 price pic16f1939 datasheet pdf pic16f1939 i pt datasheet pic16f1939 pdf microchip pic16f1939 PIC16F1939-I/P pinout PIC16F1939-I/P equivalent PIC16F1939-I/P replacement PIC16F1939-I/P vs PIC16F1939-E/P PIC16F1939-I/P 40-pin PDIP PIC16F1939-I/P application circuit

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology PIC16F1939-I/P PIC16F1939-E/P PIC16F1939T-E/P PIC16F1939-I/PT PIC16 PIC16 XLP enhanced mid-range PIC16 8-bit RISC microcontroller flash microcontroller microcontroller semiconductor XLP low-power technology LCD driver EEPROM SRAM program memory PIC16F1939-I/P 40-pin PDIP through-hole package surface mount industrial control energy metering environmental monitoring LED display controller battery-powered instruments
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ