Microchip Technology

PIC16F684-E/ML - 20MHz Flash Microcontroller | Microchip Technology

MPN: PIC16F684-E/ML ✓ چالاک
2.0 V to 5.5 V Vdss 16-QFN (4x4 mm), ML package Package 20 MHz Speed 3.5 KB (2K x 14 words) Memory
MOQ: 1 |

PIC16F684-E/ML گشتی

The Microchip Technology PIC16F684-E/ML is a 20 MHz, 8-bit Flash microcontroller with 3.5 KB of program memory, 128 bytes of RAM, 256 bytes of EEPROM, and 12 I/O pins in a 16-QFN (4x4 mm) package. It operates from 2.0 V to 5.5 V and is specified for the extended -40 °C to +125 °C temperature range.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, I/O ports, and peripherals on one integrated circuit. The PIC16F684 belongs to Microchip's low-pin-count PIC Flash family and uses the mid-range enhanced mid-range x14 architecture. This architecture combines a compact RISC-like instruction set with nanoWatt technology, on-board EEPROM data memory, and peripherals suited to embedded control, measurement, monitoring, and low-power automation.

The device provides 3.5 KB of Flash program memory and 128 bytes of data RAM. Its on-board EEPROM supports nonvolatile parameter storage without an external memory component, while 12 I/O pins allow external sensors, switches, indicators, and actuators to be connected. A maximum clock speed of 20 MHz supports time-sensitive control loops and communication tasks. The wide 2.0 V to 5.5 V operating range also permits operation across common low-voltage system rails.

The extended-temperature grade is important for equipment that must operate reliably in industrial environments, including temperature-controlled machinery, building controls, and monitoring equipment. The compact 4x4 mm QFN footprint supports space-constrained designs, while its surface-mount construction is suitable for automated PCB assembly. Firmware can be programmed and updated through the device's Flash memory rather than requiring mask-programmed parts for development and production.

Typical applications include industrial control panels, digital thermometers, environmental monitoring, simple motor and relay control, compact power supplies, and low-power sensor nodes. The combination of EEPROM, 12 I/O pins, and a wide supply range is especially useful in designs that must retain configuration data and operate from an unregulated or varying low-voltage source.

PCB design should follow the package drawings and pin-description tables in the manufacturer datasheet. Place all decoupling capacitors close to the power pins, route oscillator connections carefully, and observe the exposed-pad and thermal requirements of the QFN footprint. Validate startup behavior, brownout response, and peripheral operation across the intended 2.0 V to 5.5 V supply range.

This product page combines manufacturer specifications, package details, application guidance, and cross-reference findings to help engineers evaluate the PIC16F684-E/ML for embedded designs. It also distinguishes temperature-grade alternatives from true pin-compatible options so that replacement decisions account for electrical behavior, package compatibility, and qualification requirements.

جێگرەوەکانی جێگۆڕکێ بۆ PIC16F684-E/ML — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC16F684-E/ML (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Timers, ADC, Core Architecture, I/O Pins.

Microchip Technology
Package: 16-pin QFN (4x4 mm)
Timers: Two 8-bit + one 16-bit
Core Architecture: PIC16 mid-range 8-bit RISC
Microchip Technology
Package: 16-pin QFN (4x4 mm) with exposed thermal pad
Timers: 3 (Timer0, Timer1, Timer2)
ADC: 11 channels, 10-bit resolution
Microchip Technology
Package: 20-pin QFN (4x4 mm) with exposed pad
Timers: 2x 8-bit, 1x 16-bit
ADC: 10-bit, up to 12 channels
Microchip Technology
Package: QFN 4x4 mm 16-pin (ML)
Timers: 2x 8-bit + 1x 16-bit
ADC: 10-bit, 8 channels
Microchip Technology
Package: 28-pin QFN (6x6 mm) with exposed pad
Timers: 2 (Timer0 8-bit, Timer1 16-bit)
ADC: 8-bit, 4 channels

PIC16F684-I/ML

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 16-QFN (4x4 mm), ML
PIC16 mid-range 8-bit RISC · 3.5 KB (2K x 14) · 128 bytes · 256 bytes · 20 MHz (5 MIPS) · 2.0 V to 5.5 V · 12 · 10-bit, 8 channels

پەیوەندی بۆ نرخ

بینینی داتاشیت →

PIC16F684T-I/ML

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 16-QFN (4x4 mm), ML
8-bit PIC16 mid-range RISC · 14 bits · 35 single-word instructions · 20 MHz (200 ns instruction cycle) · 3.5 KB (2K x 14 words) · 128 bytes · 256 bytes · 12

پەیوەندی بۆ نرخ

بینینی داتاشیت →

PIC16F684-E/ML زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type 8-bit Flash-based CMOS microcontroller
Maximum Clock Speed 20 MHz
Program Memory 3.5 KB (2K x 14 words)
Data RAM 128 bytes
Data EEPROM 256 bytes
I/O Pin Count 12 pins
Device Pin Count 14 logical pins
Operating Voltage Range 2.0 V to 5.5 V
Temperature Range -40 °C to +125 °C
Architecture Mid-range enhanced mid-range x14 architecture
Program Memory Type Flash
On-Board EEPROM 256 bytes
Instruction Execution Time 200 ns
Instruction Set Size 35 single-word instructions
پاکێج 16-QFN (4x4 mm), ML package
جۆری دامەزراندن Surface Mount
Technology nanoWatt Technology

ڕێنمایی ڕێکخستنی پینی PIC16F684-E/ML 16-qfn (4x4 mm), ml package

ڕێکخستنی پین بۆ PIC16F684-E/ML (پاکێجی 16-qfn (4x4 mm), ml package). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 16-qfn (4x4 mm), ml package بۆ PIC16F684-E/ML

هیچ داتای وردی پینئاوت بەردەست نییە بۆ PIC16F684-E/ML.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

PIC16F684-E/ML گونجاوە بۆ 6 بەکارھێنانs: Industrial temperature control, Environmental monitoring, Compact sensor nodes, Relay and switch control, Digital thermometers, Compact power-supply controllers.

🏭

Industrial temperature control

The PIC16F684-E/ML fits industrial temperature controllers because its -40 °C to +125 °C specification covers environments hotter than ordinary industrial-grade controllers. The 20 MHz clock supports responsive switching and timing tasks, while 12 I/O pins can connect temperature inputs, alarm indicators, relays, and communication lines. Its 256-byte on-chip EEPROM retains configuration values across power loss. Place the controller close to the regulated logic rails and validate the complete sensor and power subsystem over the full -40 °C to +125 °C ambient range.

🧩

Environmental monitoring

The PIC16F684-E/ML can supervise temperature, humidity, and air-quality sensing nodes because it combines 12 I/O pins with 128 bytes of RAM and 256 bytes of EEPROM in a compact 4x4 mm QFN package. A periodic measurement architecture using nanoWatt technology can reduce unnecessary activity when readings are collected infrequently. The 2.0 V to 5.5 V operating range supports low-voltage sensor systems, although the engineer must confirm each peripheral's individual voltage limits and timing requirements in the manufacturer datasheet.

🔧

Compact sensor nodes

The PIC16F684-E/ML is appropriate for compact, battery-conscious sensor nodes that periodically acquire measurements and store configuration locally. Its 3.5 KB of Flash provides room for application firmware, 128 bytes of RAM supports short processing tasks, and the EEPROM preserves calibration or installation data without an external serial memory. The 16-QFN footprint leaves board area for sensors and power circuitry. Firmware should disable unused peripherals, use the low-power features described by the manufacturer, and avoid operation outside the device's specified clock and voltage limits.

⚡

Relay and switch control

The PIC16F684-E/ML can manage relays, contactors, indicators, and digital switches where 12 I/O pins and a 20 MHz control rate are sufficient. Its EEPROM retains setup values, while Flash permits field firmware updates when the product design includes an appropriate programming interface. The broad 2.0 V to 5.5 V supply range simplifies many embedded control boards. Designers should account for inductive loads separately with suitable driver circuits, flyback protection, and grounding because the MCU pins are intended for control signals rather than direct high-energy switching.

🌡️

Digital thermometers

The PIC16F684-E/ML suits digital thermometers and panel instruments that combine sensor conditioning, display control, and configuration storage. Its 12 I/O pins can support an input from a compatible temperature sensor as well as indicators, buttons, or an interface to a display module. The 3.5 KB Flash memory accommodates display and calibration routines, and the 256-byte EEPROM can hold calibration coefficients. Use the QFN land pattern and exposed-pad treatment shown in the package drawing, and verify accuracy over the complete measurement range rather than relying on MCU specifications alone.

🔌

Compact power-supply controllers

The PIC16F684-E/ML can serve as the supervisory controller in a compact power-conversion module because it combines Flash firmware, EEPROM configuration storage, timing capability, and 12 I/O pins. It can monitor enable signals, fault flags, and sequencing events while the power stage performs the energy conversion. The 2.0 V to 5.5 V range is useful for low-voltage control rails, but the MCU does not replace high-current power switches or their protection circuitry. Validate startup, fault handling, and control-loop timing at minimum, nominal, and maximum supply voltages.

What are the key specifications of PIC16F684-E/ML that engineers should know?
The PIC16F684-E/ML is a 20 MHz, 8-bit Flash microcontroller with 3.5 KB of program memory, 128 bytes of RAM, 256 bytes of EEPROM, 12 I/O pins, and a 2.0 V to 5.5 V operating range in a 16-QFN (4x4 mm) package. According to the Microchip PIC16F684 datasheet, it uses the mid-range enhanced mid-range x14 architecture and nanoWatt technology. Its -40 °C to +125 °C grade makes it appropriate for extended-temperature industrial equipment, while the compact QFN footprint reduces board space compared with leaded packages.
Where can I download the PIC16F684-E/ML datasheet PDF?
The official PIC16F684-E/ML datasheet PDF is available from Microchip at https://ww1.microchip.com/downloads/en/DeviceDoc/41202C.pdf. The document covers the 14-pin Flash-based, 8-bit CMOS PIC16F684 family and includes electrical characteristics, package information, and device details. Use the manufacturer’s product page at https://www.microchip.com/en-us/product/PIC16F684 as the primary entry point for the latest device documentation and product status.
Where can I find the PIC16F684 pinout?
The PIC16F684 pinout is documented in the pin-description and package-drawing sections of the manufacturer datasheet at https://ww1.microchip.com/downloads/en/DeviceDoc/41202C.pdf. The -E/ML ordering code uses the 16-QFN (4x4 mm) ML package, so the footprint and numbered pad assignments must be selected from the QFN package drawing rather than from the 14-pin PDIP, SOIC, or TSSOP options. Assign tracks from the exact datasheet pin table and expose the thermal pad as directed.
How do I program a PIC16F684-E/ML?
Program a PIC16F684-E/ML through a programmer compatible with Microchip PIC16 Flash devices, using the programming interface and voltage levels specified in the device programming documentation. The controller stores firmware in its 3.5 KB of on-chip Flash memory, allowing the same programmed MCU to be used across development and production rather than relying on mask ROM. Confirm the exact package pins, programming connector, and target voltage against the Microchip PIC16F684 datasheet before fabrication.
What is the PIC16F684-E/ML price?
Current unit pricing is displayed through XAIPART’s Request a Quote form on this page and should be checked before committing a design to procurement. The product-page pricing panel reflects the requested quantity and current commercial terms, which may change with market conditions. Use the same form to request quantity availability, production lead time, and any required traceability or compliance documentation.
Where can I buy PIC16F684-E/ML online?
Use the Request a Quote form on this page to request PIC16F684-E/ML pricing, stock confirmation, and lead time from XAIPART. Quote requests are the appropriate route when the required quantity, packing format, date code, or traceability level must be confirmed for a production BOM. The exact ML suffix should remain unchanged because it identifies the 16-QFN package and qualification attributes of the selected device.
What is the lead time for PIC16F684-E/ML?
The current lead time for PIC16F684-E/ML depends on available inventory, order quantity, and the requested delivery date, so it should be confirmed through the Request a Quote form on this page. State the production quantity, target delivery date, acceptable date-code policy, and whether each unit must be shipped in the manufacturer’s original tape-and-reel packing. This allows procurement to return an actionable commitment instead of an unconfirmed estimate.
Is PIC16F684-E/ML in stock?
Stock for PIC16F684-E/ML is best confirmed through the Request a Quote form on this page because availability can change with order size and required packing. Include the quantity needed, desired ship date, and any date-code or traceability constraints in the request. A successful quotation should confirm both the commercial terms and the allocation reserved for the stated quantity.
PIC16F684-E/ML vs PIC16F684-I/ML — which is better for an industrial design?
PIC16F684-E/ML is the better choice when the design must operate across the extended -40 °C to +125 °C range. The PIC16F684-I/ML shares the same PIC16F684 family architecture and 16-QFN package, but the I grade is intended for the industrial temperature range, while the E grade provides the broader temperature coverage. Confirm the exact temperature limits and ordering information in the Microchip datasheet before substituting one grade for the other.
What is the difference between PIC16F684-E/ML and PIC16F684T-I/ML?
The principal distinction between PIC16F684-E/ML and PIC16F684T-I/ML is the device grade encoded by the ordering suffix. The E/ML device is identified for extended-temperature operation from -40 °C to +125 °C, while the T-I/ML designation represents another qualified grade within the same PIC16F684 family and 16-QFN package. Review the manufacturer's ordering table and device qualification information before using the T-I/ML as a replacement.
When should I choose PIC16F684-E/ML over PIC16F684-I/ML?
Choose PIC16F684-E/ML when enclosure temperatures can exceed the industrial range associated with PIC16F684-I/ML and the equipment requires operation up to +125 °C. Both devices use the same compact 16-QFN (4x4 mm) package and belong to the PIC16F684 family, so the decision should focus on temperature grade and qualification rather than PCB footprint. For room-temperature consumer products, confirm the lower-temperature option against cost and availability.
Is PIC16F684-E/ML suitable for industrial temperature applications?
The PIC16F684-E/ML is suitable for extended-temperature industrial applications because it is specified from -40 °C to +125 °C. Its 2.0 V to 5.5 V operating range supports common embedded supply voltages, while the 12 I/O pins can serve sensors, indicators, switches, and control outputs. The enclosure, power supply, and adjacent components must also tolerate the application's worst-case ambient temperature.
What can replace PIC16F684-E/ML?
PIC16F684-I/ML is the closest confirmed pin-compatible replacement because it shares the PIC16F684 family, 16-QFN (4x4 mm) package, and core device functions. Its important qualification is temperature grade, so it should replace the E/ML only when the required ambient range remains within the I-grade specification. PIC16F684T-I/ML is another same-package family candidate, but its grade must also be checked against the original environmental requirements.
Is PIC16F684-E/ML the same as PIC16F684-I/ML?
PIC16F684-E/ML and PIC16F684-I/ML are closely related PIC16F684 devices in the same 16-QFN (4x4 mm) package, but they are not identical temperature grades. The E/ML part supports the extended -40 °C to +125 °C range, while the I/ML designation represents the industrial grade. They may be mechanically interchangeable only when the lower I-grade temperature limits fully cover the target application.
What is the best Microchip Technology equivalent for PIC16F684-E/ML?
PIC16F684-I/ML is the best confirmed Microchip Technology equivalent for PIC16F684-E/ML because both use the 16-QFN (4x4 mm) ML package and the same PIC16F684 family platform. The decisive engineering difference is environmental grade: the E/ML reaches +125 °C, while the I/ML is intended for the industrial range. Use the I/ML only after checking ambient-temperature margins and the manufacturer’s ordering table.

داتای سەرچاوەی ئەندازیاری بۆ PIC16F684-E/ML — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose PIC16F684-E/ML when the assembly must operate from -40 °C to +125 °C and the 16-QFN footprint, 20 MHz clock, 3.5 KB Flash, 128-byte RAM, and 256-byte EEPROM meet the product requirements. Choose PIC16F684-I/ML when the application remains within the industrial temperature range and that grade provides a better commercial fit; its package and core resources remain compatible with the same PCB. Consider PIC16F684T-I/ML only after confirming its specific grade and qualification requirements. Do not use a SOIC or leaded package variant as a board-level replacement. For designs needing substantially more memory, I/O, or peripheral capacity, the PIC16F684 family may be too constrained even though it is appropriate for compact embedded-control tasks.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە PIC16F684-I/ML PIC16F684T-I/ML
Brand Microchip Technology Microchip Technology Microchip Technology
Package 16-QFN (4x4 mm), ML 16-QFN (4x4 mm), ML - same 16-QFN (4x4 mm), ML - same
Maximum Clock Speed 20 MHz 20 MHz 20 MHz
Program Memory 3.5 KB (2K x 14 words) 3.5 KB (2K x 14 words) 3.5 KB (2K x 14 words)
Data RAM 128 bytes 128 bytes 128 bytes
Data EEPROM 256 bytes 256 bytes 256 bytes
I/O Pin Count 12 pins 12 pins 12 pins
Operating Voltage Range 2.0 V to 5.5 V 2.0 V to 5.5 V 2.0 V to 5.5 V
Temperature Grade -40 °C to +125 °C Industrial grade; exact limits require confirmation T-I ordering grade; exact limits require confirmation

جیاکەرەوە سەرەکییەکان

  • Extended-temperature coverage in the same compact footprint (بەراورد بەPIC16F684-I/ML)
  • No PCB footprint change for industrial-only designs (بەراورد بەPIC16F684-I/ML)
  • Compact integration with useful nonvolatile storage (بەراورد بەPIC16F684T-I/ML)

تێبینییەکانی دیزاین

Use the ML package drawing and numbered pad table from the manufacturer datasheet when defining the PCB footprint. Place the required input and output decoupling capacitors next to their associated supply pins, keep the exposed-pad connection consistent with the package drawing, and provide the manufacturer-recommended copper area for thermal performance. Confirm pin 1 orientation in the CAD library because package orientation errors can place every QFN pad incorrectly even when the land pattern dimensions are correct.

Keep oscillator components and traces close to the oscillator pins, with short return paths and a quiet ground reference. Avoid routing high-current switching-node copper beneath sensitive analog or timing areas. Because the device supports operation up to 20 MHz, PCB signal-integrity and layout quality become increasingly important at higher operating frequencies; prototype timing and signal margins across the intended voltage and temperature range rather than assuming ideal waveforms.

The PIC16F684-E/ML operates from 2.0 V to 5.5 V, but that family voltage range does not authorize every peripheral to operate at every voltage. Review each peripheral's operating limits, startup behavior, and brownout-related requirements in the datasheet. Use local bulk and high-frequency decoupling, and ensure the power source can support both normal processing load and any external peripherals without causing dynamic rail excursions during switching.

The compact 16-QFN package relies heavily on its exposed pad and surrounding PCB copper for heat dissipation. Follow the datasheet's thermal conditions and reflow profile, inspect solder fill around the exposed pad after assembly, and avoid enclosing the device in an thermally insulating enclosure without a calculated heat path. Validate junction temperature through the package thermal data rather than using board ambient temperature as a substitute.

Do not substitute the E, I, or T ordering grades solely because they use the same ML footprint. Check the manufacturer ordering table for temperature limits, qualification attributes, and marking. Likewise, PIC16F684-E/SL and other package variants are not PCB drop-in replacements because the -SL option uses a 14-SOIC package. Firmware and application assumptions should also be reviewed whenever changing between PIC16F684 family members.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The verified product information identifies the ML package as lead-free in a listing description, but no complete RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals declaration was identified for the exact ordering code. Use the manufacturer product documentation and the Request a Quote form to obtain current compliance and traceability records.

داتا پشتڕاستکراوەتەوە لە: 2026-11-10 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

pic16f684 datasheet pic16f684 pinout pic16f684 programming pic16f684 price pic16f684 datasheet pdf pic16f684 projects pic16f684 programmer PIC16F684-E/ML datasheet PIC16F684-E/ML pinout PIC16F684-E/ML equivalent PIC16F684-E/ML replacement PIC16F684-E/ML price PIC16F684-E/ML vs PIC16F684-I/ML PIC16F684-E/ML QFN footprint Microchip PIC16F684-E/ML

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology PIC16F684-E/ML PIC16F684-I/ML PIC16F684T-I/ML PIC16F684 PIC16 Flash microcontroller family 8-bit microcontroller Flash memory CMOS microcontroller mid-range x14 architecture nanoWatt Technology program memory data RAM EEPROM 16-QFN QFN package family surface-mount package 20 MHz clock 2.0 V to 5.5 V operating range extended temperature grade industrial control environmental monitoring sensor node digital thermometer power-supply controller
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ