PIC16F707-I/PT - 8-Bit 20MHz MCU, 14KB Flash | Microchip
MPN: PIC16F707-I/PT ✓ چالاکPIC16F707-I/PT گشتی
An 8-bit microcontroller is a programmable integrated circuit designed to execute control logic, read sensors, manage digital interfaces, and actuate outputs. Within the product hierarchy, the PIC16F707 is a PIC16-series MCU, a general-purpose microcontroller, and an embedded semiconductor. Its 8-bit CPU architecture is suited to cost-sensitive appliances, industrial controls, access equipment, consumer products, and compact control panels where a larger processor is unnecessary.
The device provides 14 KB of flash memory, 368 bytes of data RAM, and 128 bytes of data EEPROM. Its listed operating supply range is 1.8 V to 5.5 V, while an internal oscillator is identified in the product information. These characteristics support both 3.3 V and 5 V designs, including systems that need flexible logic levels, nonvolatile program storage, and EEPROM for retained parameters.
For analog measurement, the PIC16F707 integrates a 14-channel, 8-bit ADC. The manufacturer describes the PIC16F707 family as supporting up to 32 capacitive-touch channels, making it useful for touch-sensitive keypads, capacitive controls, and human-interface panels. The combination of an ADC, capacitive-touch capability, EEPROM, and a compact 44-pin package consolidates several common peripheral functions into one device.
Typical applications include industrial control panels, capacitive-keypad interfaces, temperature and level-monitoring equipment, appliance controls, access systems, and low-power sensor nodes. Its industrial temperature-grade suffix identifies it for industrial operating conditions, while the 44-pin TQFP footprint provides more I/O and peripheral options than smaller 28-pin and 40-pin configurations.
PCB design should preserve the exposed ground and supply connections specified by the manufacturer datasheet, place decoupling capacitors close to the appropriate pins, and route sensitive analog inputs away from fast-switching nodes. Because the MCU combines analog measurement with capacitive sensing, component placement and guarding can materially affect channel performance; use the pin-description and application guidance in the Microchip datasheet when assigning PCB tracks.
This page organizes the verified electrical, memory, package, application, and procurement information for PIC16F707-I/PT while adding practical design guidance, drop-in candidate assessment, and a parameter-by-parameter comparison. It helps engineers evaluate the MCU without overlooking package compatibility, memory requirements, temperature grade, or analog and capacitive-sensing requirements.
جێگرەوەکانی جێگۆڕکێ بۆ PIC16F707-I/PT — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC16F707-I/PT (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Mounting Type, Package, Internal Oscillator, Timers, ADC.
PIC16F707-E/PT
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16F707-I/PT زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 8-bit PIC16 XLP mTouch microcontroller |
| زۆرترین فرێکوێنسیی کاتژمێر | 20 MHz |
| Internal Oscillator Frequency | 16 MHz |
| Flash Program Memory | 14 KB (8K × 14 words) |
| Data RAM | 368 bytes |
| Data EEPROM | 128 bytes |
| ڤۆڵتاژی دابینکردنی کارکردن | 1.8 V to 5.5 V |
| ADC Resolution | 8 bits |
| ADC Channels | 14 channels |
| Capacitive Touch Channels | Up to 32 channels |
| پانی بسێ داتا | 8 bits |
| CPU Family | PIC16 |
| Input and Output Count | 36 I/O |
| پلەی گەرمیی کارکردن | -40 °C to +85 °C |
| Temperature Grade | Industrial |
| پاکێج | 44-lead TQFP, 10 mm × 10 mm |
| جۆری دامەزراندن | SMD/SMT |
| Package Shape | Square |
ڕێنمایی ڕێکخستنی پینی PIC16F707-I/PT square
ڕێکخستنی پین بۆ PIC16F707-I/PT (پاکێجی square). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ PIC16F707-I/PT.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
PIC16F707-I/PT گونجاوە بۆ 6 بەکارھێنانs: Industrial Control Panel, Capacitive Keypad Interface, Temperature and Analog Sensor Hub, Appliance User Interface, Access and Security Controller, Low-Power Sensor Node.
Industrial Control Panel
PIC16F707-I/PT fits industrial control panels that combine touch keys, analog inputs, and discrete outputs in one controller. Its 36 I/O, 14-channel 8-bit ADC, and up to 32 capacitive-touch channels can serve operator interfaces, status indicators, potentiometers, and simple sensor inputs. The industrial-grade ordering option and -40 °C to +85 °C specified range support equipment operating across a wide temperature span, while the 1.8 V to 5.5 V supply range supports common industrial logic levels. The 20 MHz maximum clock is suitable for real-time scanning and control tasks, although the 368-byte RAM requires careful allocation for buffers and stack usage.
پێشنیارکراو
Capacitive Keypad Interface
PIC16F707-I/PT is appropriate for a capacitive keypad because the PIC16F707 family supports up to 32 capacitive-touch channels. Multiple touch electrodes can be connected to a common application board while the MCU evaluates button state, debounce timing, and illumination commands. Its 20 MHz maximum clock provides timing margin for periodic channel measurement, and the 14 KB flash program area can store keypad scanning logic and interface code. Use the manufacturer's capacitive-measurement guidance for external components, grounding, and signal routing because parasitic capacitance and nearby switching nodes can affect scan accuracy.
پێشنیارکراو
Temperature and Analog Sensor Hub
PIC16F707-I/PT can act as a compact analog sensor hub for temperature, level, pressure, or potentiometer inputs. The integrated 14-channel, 8-bit ADC provides enough channels for several monitored variables, while 128 bytes of EEPROM can retain calibration identifiers or configuration parameters. Its 1.8 V to 5.5 V operating range permits use with both 3.3 V and 5 V sensor circuits, and the 20 MHz maximum clock supports scheduled conversion, filtering, and data-transfer routines. Application design should verify the ADC acquisition requirements, source impedance, reference voltage, and grounding against datasheet 40001418C.
پێشنیارکراو
Appliance User Interface
PIC16F707-I/PT can consolidate an appliance's capacitive controls, analog adjustment, and discrete outputs into a single controller. The 36 available I/O lines are useful for push-button indication, relay-control signals, display interfaces, and sensor inputs, while the ADC can process an analog selector or level detector. A 20 MHz maximum clock supports responsive control without requiring a larger processor, and 14 KB of flash provides space for state management and user-interface routines. The 368-byte RAM should be budgeted carefully if display buffers, communications, and interrupt handlers operate concurrently.
پێشنیارکراو
Access and Security Controller
PIC16F707-I/PT suits access-control readers and security interfaces that combine capacitive sensing with configurable digital inputs and outputs. The MCU can manage credential inputs, indicator signals, door-request outputs, and diagnostic functions while retaining selected configuration data in its 128-byte EEPROM. The 14-channel ADC can support analog supervision where required, and the 44-lead package provides more external connections than a minimal controller. The 20 MHz maximum clock and 368-byte RAM fit typical reader tasks, but protocol handling, audit storage, and security timing must be sized against those memory limits before layout release.
پێشنیارکراو
Low-Power Sensor Node
PIC16F707-I/PT fits a low-power sensor node that periodically measures analog inputs, evaluates capacitive controls, and wakes external circuitry for communication. Its PIC16 XLP positioning supports low-power embedded designs, while the internal 16 MHz oscillator and 20 MHz maximum device clock provide flexible timing options. The 14 KB flash retains application firmware, and 128 bytes of EEPROM can hold limited nonvolatile calibration or operating data. Because the node may operate from 3.3 V or 5 V, the 1.8 V to 5.5 V supply range is useful, although final average-current performance depends on the selected sleep mode, oscillator configuration, and duty cycle.
پێشنیارکراو
داتای سەرچاوەی ئەندازیاری بۆ PIC16F707-I/PT — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | PIC16F707-E/PT |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 44-lead TQFP (10 mm × 10 mm) | 44-lead TQFP (10 mm × 10 mm) |
| CPU Architecture | 8-bit PIC16 | 8-bit PIC16 |
| Maximum Clock Frequency | 20 MHz | 20 MHz |
| Flash Memory | 14 KB (8K × 14 words) | 14 KB (8K × 14 words) |
| Data RAM | 368 bytes | 368 bytes |
| Data EEPROM | 128 bytes | 128 bytes |
| Operating Supply Voltage | 1.8 V to 5.5 V | 1.8 V to 5.5 V |
| ADC | 14 channels, 8-bit resolution | 14 channels, 8-bit resolution |
| Temperature-Grade Suffix | I (industrial) | E |
جیاکەرەوە سەرەکییەکان
- Industrial-grade ordering option (بەراورد بەPIC16F707-E/PT)
- Integrated analog and capacitive sensing (بەراورد بەPIC16F707-E/PT)
- Compact low-voltage processing platform (بەراورد بەPIC16F707-E/PT)
تێبینییەکانی دیزاین
Place the required input and output decoupling capacitors directly beside their corresponding supply pins, and route them through the shortest practical ground path. The 44-lead TQFP footprint offers fine-pitch routing, so maintain manufacturer-recommended pad geometry and avoid accidental bridges between adjacent pins. Use the pin-description table in datasheet 40001418C to distinguish digital, analog, power, and ground connections before assigning nets.
Keep analog inputs and ADC-capacitor connections away from high-current switching nodes, clock edges, and touch-sensing electrodes where possible. Ground-plane return paths should not cross the analog input traces, and noisy signals should be routed on a different layer or away from the measurement area. The capacitive-touch performance depends on stable reference and surrounding capacitance, so follow the manufacturer's recommended charge-and-discharge layout.
Do not assume that 14 KB of flash, 368 bytes of RAM, and 128 bytes of EEPROM can be used without accounting for bootloader space, configuration words, library code, stack depth, and interrupt requirements. Estimate worst-case RAM consumption before adding display buffers or communication routines. Likewise, verify the minimum voltage for every enabled clock and peripheral instead of applying the 1.8 V headline value indiscriminately.
For a battery or low-power design, calculate the average supply current from active current, sleep current, wake duration, and measurement interval rather than using a single operating-current value. External sensors and communication circuitry may dominate the node's energy budget even when the PIC16F707 itself is placed in a low-power mode. Select the operating voltage and oscillator settings from datasheet 40001418C, then validate the complete current profile on the assembled PCB.
زانیاری پابەندبوون
The verified product and distributor records do not provide definitive component-level compliance statements for this ordering code. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status with Microchip Technology before procurement.