PIC16F73T-I/SO - 8-Bit 20MHz Microcontroller | Microchip
MPN: PIC16F73T-I/SO ✓ چالاکPIC16F73T-I/SO گشتی
A microcontroller is a compact embedded-control IC that integrates a processor core, program memory, data memory, I/O ports, timers, and analog peripherals into one device. The PIC16F73 belongs to the PIC16 family of 8-bit RISC microcontrollers and is positioned between simple fixed-function controllers and larger 16- or 32-bit processors. Its combination of FLASH program memory, compact packaging, and dedicated timers makes it useful for embedded control, measurement, and communication-interface products.
Key features include 200 ns instruction execution, a 35-instruction single-word instruction set, five 8-bit ADC channels, and 22 general-purpose I/O lines. According to the Microchip manufacturer product page, the device is upward compatible with the PIC16C5X, PIC12CXXX, and PIC16C7X families. The -I temperature grade supports industrial environments, while the -T ordering suffix indicates tape-and-reel production packaging.
Internally, the PIC16F73 combines a 4K-word FLASH program memory organized as 4K × 14 bits with 192 bytes of data RAM. The 14-bit program word supports a compact instruction set intended to reduce code density requirements. Its 20 MHz operating capability gives designers headroom for timing-sensitive control loops, event scanning, and peripheral servicing while retaining the straightforward programming model associated with 8-bit PIC devices.
Typical applications include industrial sensor controllers, motor and actuator interfaces, small instrumentation products, and embedded communication equipment. The 22 I/O pins allow digital inputs, outputs, and port-based control functions to be distributed across a board. The five-channel 8-bit ADC supports basic analog measurement, while the additional timers provide timing resources for periodic sampling, pulse measurement, or motor-control sequencing.
For PCB design, follow the manufacturer's 28-pin SOIC land pattern and keep the oscillator, reset, programming, and decoupling connections within the recommendations in the PIC16F73 datasheet. Validate startup and peripheral timing in the target firmware because the device's available timing budget changes with clock configuration, instruction mix, and interrupt latency.
This page consolidates the PIC16F73T-I/SO device specifications, application guidance, pin-package information, and same-footprint replacement context into a focused engineering reference for MCU design, sourcing, and board bring-up.
جێگرەوەکانی جێگۆڕکێ بۆ PIC16F73T-I/SO — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC16F73T-I/SO (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Program Memory Size, Program Memory Type, Core Architecture, Operating Temperature.
PIC16F73-I/SO
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16C73T-I/SO
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC16C433T-E/SO
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC16C54A-04E/SO
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC16F73T-I/SO زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 8-bit CMOS FLASH-based PIC microcontroller |
| زۆرترین فرێکوێنسیی کاتژمێر | 20 MHz |
| Program Memory | 7 KB (4K × 14 bits) |
| Data Memory | 192 bytes RAM |
| General-Purpose I/O | 22 lines |
| ADC Resolution | 8 bits |
| ADC Channels | 5 channels |
| Instruction Execution Time | 200 ns |
| Instruction Set | 35 single-word instructions |
| Processor Architecture | 8-bit RISC |
| Program Memory Type | CMOS FLASH |
| Additional Timers | 2 timers |
| مەودای پلەی گەرمیی کارکردن | -40°C to +85°C |
| پاکێج | 28-pin SOIC |
| جۆری دامەزراندن | Surface mount |
ڕێنمایی ڕێکخستنی پینی PIC16F73T-I/SO 28-pin soic
ڕێکخستنی پین بۆ PIC16F73T-I/SO (پاکێجی 28-pin soic). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ PIC16F73T-I/SO.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
PIC16F73T-I/SO گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor and Signal Conditioning, Motor, Actuator, and Relay Control, Basic Instrumentation and Measurement, Communication Interface and Protocol Bridge, Embedded Control with In-System Flash Updates, Compact Control Board for OEM Equipment.
Industrial Sensor and Signal Conditioning
The PIC16F73T-I/SO fits industrial sensor controllers because its five 8-bit ADC channels can sample basic analog inputs while 22 I/O lines handle digital sensors, alarm outputs, and interface signals. The -40°C to +85°C rating supports equipment operating across a wide industrial temperature range, and 192 bytes of RAM provides working space for acquisition states and control variables. At up to 20 MHz, the controller can service periodic sampling, filtering, threshold decisions, and communications without relying on a higher-cost processor. A practical design uses the ADC channels for transducers, timer resources for periodic conversions, and the FLASH-based program memory for in-system firmware updates. Designers should verify the actual sensor excitation, conversion accuracy, and ADC reference requirements in the target system.
پێشنیارکراو
Motor, Actuator, and Relay Control
PIC16F73T-I/SO is appropriate for compact motor, actuator, and relay-control modules where deterministic timing and numerous discrete control points matter. Its 20 MHz clock provides processing margin for state-machine logic, while two additional timers can support pulse generation, input capture, debouncing, and periodic maintenance tasks. The 22 I/O lines can distribute control signals across multiple relays, gates, or driver-enable inputs. The industrial -40°C to +85°C rating makes the device suitable for equipment exposed to varying enclosure temperatures. For inductive or motor loads, the microcontroller should control suitable driver circuitry rather than switching load current directly. Firmware must include defined startup states, timeout behavior, and safe outputs so that reset or firmware faults do not create hazardous actuator conditions.
پێشنیارکراو
Basic Instrumentation and Measurement
The PIC16F73T-I/SO can serve as the control core in handheld or panel-mounted instrumentation because it combines a 20 MHz processor, five ADC channels, 192 bytes of RAM, and 22 I/O lines in a 28-pin SOIC. The microcontroller can acquire analog measurements, apply calibration and scaling, drive a display, respond to keypad inputs, and manage a communications port. FLASH program memory is useful for storing calibration tables and supporting field updates, while the compact package leaves board area for analog front-end and display circuitry. A typical design routes sensor signals through dedicated conditioning hardware, uses timer interrupts for stable sampling, and reserves serial I/O for a host or data logger. Accuracy depends on the ADC reference, analog layout, calibration method, and divider tolerances, so these parameters should be validated together rather than inferred solely from the microcontroller rating.
پێشنیارکراو
Communication Interface and Protocol Bridge
PIC16F73T-I/SO is well suited to small protocol-conversion and embedded communications controllers because its 20 MHz execution rate and 22 I/O lines can handle multiple UART or general-purpose serial functions alongside the core PIC peripherals. Its 4K × 14-bit FLASH memory provides substantially more code space than the legacy PIC16C54A-04E/SO option, allowing protocol state machines, framing logic, diagnostics, and configuration handling to coexist in one controller. The 192-byte RAM supports buffers, although application-specific throughput must be checked against interrupt latency and serial-data rates. Use the manufacturer's oscillator and timing guidance to prevent baud-rate error, and isolate communications connectors appropriately. A practical bridge validates framing, timeout, checksum, and restart behavior before connecting to the target bus.
پێشنیارکراو
Embedded Control with In-System Flash Updates
PIC16F73T-I/SO is useful where field-updatable firmware is important because its 4K × 14-bit CMOS FLASH program memory can be reprogrammed rather than replaced. The -T suffix identifies a tape-and-reel production package, while the -I grade supports -40°C to +85°C operation. In an appliance controller, appliance controller, or compact embedded instrument, the MCU can retain application logic, calibration constants, and a controlled update path in one device. This architecture reduces field-service complexity compared with mask-programmed or one-time-programmable controllers. The implementation should include a defined programming connector or communication interface, brownout-aware update control, and rollback or recovery behavior appropriate to the product's risk level. Validate erase, write, and programming endurance requirements in the intended deployment rather than assuming that every update method is interchangeable.
پێشنیارکراو
Compact Control Board for OEM Equipment
PIC16F73T-I/SO fits original-equipment control boards that need deterministic embedded processing without a large logic device. The 28-pin SOIC package limits PCB footprint, while 22 I/O lines support panel switches, status indicators, relays, and external data acquisition. A 20 MHz clock and two additional timers give the firmware sufficient timing granularity for sequencing and periodic maintenance tasks, and the five-channel ADC supports simple mixed-signal equipment control. The -40°C to +85°C range covers many industrial OEM environments. Board partitioning should keep switching devices and high-current loads away from sensitive analog and oscillator areas. Firmware should define safe outputs for every startup state and use timer-based debouncing rather than blocking delays. A migration path to another PIC16F73 ordering code is possible, but the industrial temperature grade and tape-and-reel suffix must be retained where required.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ PIC16F73T-I/SO — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | PIC16F73-I/SO | PIC16C73T-I/SO | PIC16C433T-E/SO | PIC16C54A-04E/SO |
|---|---|---|---|---|---|
| Package | 28-pin SOIC | 28-pin SOIC - same footprint | 28-pin SOIC - same footprint | 28-pin SOIC - same footprint | 28-pin SOIC - same footprint |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 8 MHz | 4 MHz |
| Program Memory | 4K × 14-bit FLASH | 4K × 14-bit FLASH | 4K × 14-bit legacy non-FLASH program memory | 256 words | 512 words |
| Data Memory | 192 bytes RAM | 192 bytes RAM | 192 bytes RAM | 64 bytes RAM | 72 bytes RAM |
| General-Purpose I/O | 22 lines | 22 lines | 22 lines | 13 lines | 12 lines |
| ADC | 5 channels × 8 bits | 5 channels × 8 bits | 5 channels × 8 bits | No ADC | No ADC |
| Operating Temperature Range | -40°C to +85°C | 0°C to +70°C | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C |
| Programming and Update Capability | In-system programmable CMOS FLASH | In-system programmable CMOS FLASH | Legacy program-memory programming | Legacy program-memory programming | Legacy program-memory programming |
| Additional Timers | 2 timers | 2 timers | 2 timers | 1 timer | 1 timer |
جیاکەرەوە سەرەکییەکان
- Higher processing speed than the legacy 28-pin alternatives (بەراورد بەPIC16C54A-04E/SO)
- Larger program memory for contemporary firmware (بەراورد بەPIC16C433T-E/SO)
- More RAM and I/O capacity for mixed embedded-control boards (بەراورد بەPIC16C433T-E/SO)
- Integrated ADC for embedded measurement (بەراورد بەPIC16C54A-04E/SO)
تێبینییەکانی دیزاین
Use the 28-pin SOIC land pattern and pin numbering published in the Microchip PIC16F73 manufacturer datasheet. Place the decoupling capacitor at the device power pins with a short return path to the associated ground plane, and route oscillator leads away from switching nodes and high-current outputs. The MCU is a digital controller with sensitive timing and ADC resources, so short ground returns and controlled return currents are more valuable than elaborate point-of-load filtering.
Determine the supply range, reset thresholds, and operating current from the manufacturer datasheet before finalizing the power tree. Use a supply capable of supporting the 20 MHz operating condition and all enabled peripherals. Confirm that every connected output has a defined state during reset so that the 22 I/O lines cannot activate external circuitry unexpectedly. Brownout behavior should be tested with the intended supply ramp and load.
Do not treat a 28-pin SOIC package match as proof of functional interchangeability. Compare oscillator pins, reset behavior, programming signals, I/O direction, analog inputs, interrupt sources, timer registers, and FLASH programming procedures. PIC16F73 and PIC16C7X devices may occupy the same family footprint while requiring different firmware and programming procedures. A new PCB should also provide a dedicated programming connector or otherwise ensure that production firmware can be programmed and checked.
For designs using the five 8-bit ADC channels, maintain a quiet analog reference and keep sensor traces away from oscillator, relay-driver, and switching-power paths. Use the datasheet's recommended analog and digital layout, provide adequate settling time after channel changes, and calibrate offset and gain over the intended temperature range. The ADC's 8-bit resolution supports basic measurement but does not remove errors caused by an unstable reference, inadequate source impedance, or poor grounding.
زانیاری پابەندبوون
The device has an industrial temperature grade of -40°C to +85°C, but specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not confirmed on the manufacturer product page.