PIC16F767-I/SO 8-Bit 20MHz Flash MCU | Microchip Technology
MPN: PIC16F767-I/SO ✓ چالاکPIC16F767-I/SO گشتی
A microcontroller is a programmable semiconductor that combines a CPU core, memory, peripherals, and I/O in one device. The PIC16F767 belongs to the 8-bit microcontroller hierarchy, where the PIC16 core executes a compact 35-instruction set and supports instruction execution in approximately 200 nanoseconds. This combination makes it suitable for embedded control systems requiring inexpensive local processing, mixed analog and digital sensing, and communication without a separate host processor.
The PIC16F767 provides 14 KB of flash program memory, 368 bytes of RAM, and 25 I/O pins. Its 10-bit A/D converter offers 11 channels for analog measurement, while three timers and three Capture/Compare/PWM functions support timing, event capture, and proportional control. Serial connectivity includes a three-wire SPI or two-wire I2C configuration through the synchronous serial port, plus a dedicated USART for asynchronous serial communication.
The 20 MHz device combines a compact RISC-style PIC architecture with integrated analog and communication peripherals, reducing the need for external components in compact embedded designs. The 28-pin SOIC package provides a familiar surface-mount footprint and enough pins for digital I/O, analog inputs, oscillator connections, programming, and power functions. Its architecture is positioned for control rather than high-compute workloads, making predictable timing and peripheral integration more important than processor core speed.
Typical uses include industrial sensor nodes, temperature-control equipment, motor or valve control interfaces, and compact instrumentation with RS-232 or RS-485 links. The 11-channel 10-bit A/D converter is useful when several analog sensors must be read by one controller. SPI or I2C supports expansion of displays, memories, sensors, and converters, while USART can connect to external transceivers for longer-distance serial links.
Designers should verify the voltage limits, oscillator configuration, programming method, and peripheral pin multiplexing in the manufacturer datasheet before layout. Place decoupling capacitors close to the supply pins, preserve the required programming and reset connections, and use the package pin-description table when assigning signals. The SOIC footprint also requires adequate copper for thermal dissipation at the device's operating temperature.
This page organizes the PIC16F767-I/SO specifications, verified package details, application guidance, and pin-compatible family alternatives to support faster component evaluation and PCB replacement planning.
جێگرەوەکانی جێگۆڕکێ بۆ PIC16F767-I/SO — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC16F767-I/SO (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, ADC, I/O Pins, Timers, Instruction Set.
PIC16F767T-I/SO
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16F767-E/SO
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16F767T-E/SO
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC16F767-I/SO زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 8-bit CMOS Flash Microcontroller |
| زۆرترین فرێکوێنسیی کاتژمێر | 20 MHz |
| Instruction Execution Time | 200 ns |
| Instruction Set Size | 35 instructions |
| Program Memory | 14 KB (8K x 14 words) |
| RAM | 368 bytes |
| A/D Converter Resolution | 10 bits |
| A/D Converter Channels | 11 channels |
| Timer Counters | 3 |
| Capture/Compare/PWM Modules | 3 |
| Synchronous Serial Port | 3-wire SPI or 2-wire I2C |
| UART | 1 USART |
| I/O Pins | 25 pins |
| پاکێج | 28-pin SOIC |
| جۆری دامەزراندن | Surface mount |
ڕێکخستنی پینی PIC16F767-I/SO
| پین 1 | MCLR/VPP — Programmable clear input and programming high-voltage pin |
| پین 2 | RA0/AN0 — Port A input/output and analog input channel 0 |
| پین 3 | RA1/AN1 — Port A input/output and analog input channel 1 |
| پین 4 | RA2/AN2/VREF — Port A input/output, analog input channel 2, and voltage reference |
| پین 5 | RA3/AN3/VREF+ — Port A input/output, analog input channel 3, and positive voltage reference |
| پین 6 | RA4/T0CKI — Port A input/output and Timer 0 clock input |
| پین 7 | RA5/AN4/SS/C2OUT — Port A input/output, analog input channel 4, SPI slave select, and Timer 2 comparator output |
| پین 8 | VSS — Ground reference |
| پین 9 | RA7/AN5 — Port A input/output and analog input channel 5 |
| پین 10 | RB7 — Port B input/output |
| پین 11 | RB6 — Port B input/output |
| پین 12 | RB5 — Port B input/output |
| پین 13 | RB4 — Port B input/output |
| پین 14 | RB3 — Port B input/output |
| پین 15 | RB2 — Port B input/output |
| پین 16 | RB1 — Port B input/output |
| پین 17 | RB0/INT — Port B input/output and external interrupt input |
| پین 18 | RC0/T1OSO/T1CKI — Port C input/output and Timer 1 oscillator or clock input |
| پین 19 | RC1/T1OSI/CCP2 — Port C input/output, Timer 1 oscillator input, and Capture/Compare/PWM 2 |
| پین 20 | RC2/CCP1 — Port C input/output and Capture/Compare/PWM 1 |
| پین 21 | RC3/SCK/SCL — Port C input/output, SPI clock, and I2C clock |
| پین 22 | RC4/SDI/SDA — Port C input/output, SPI data input, and I2C data |
| پین 23 | RC5/SDO — Port C input/output and SPI data output |
| پین 24 | VDD — Positive supply voltage |
| پین 25 | OSC1/CLKIN — Oscillator input or external clock input |
| پین 26 | OSC2/CLKOUT — Oscillator output or external clock output |
| پین 27 | RA6 — Port A input/output |
| پین 28 | VSS — Ground reference |
بەکارهێنانە باوەکان
PIC16F767-I/SO گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor and Condition Monitoring, Temperature and Process Control, Motor and Valve Interface Control, RS-232 and RS-485 Data Terminal, LED Lighting and Dimming Controller, Compact Instrumentation and Data Logger.
Industrial Sensor and Condition Monitoring
The PIC16F767-I/SO suits compact monitoring equipment that must acquire several analog inputs and report them through a local serial link. Its 11-channel, 10-bit A/D converter allows pressure, temperature, level, or current sensors to share one controller, while 368 bytes of RAM provides working storage for sampled values and filtering state. The 20 MHz clock supports responsive control and communication tasks, and the three timers can establish periodic sampling intervals. SPI or I2C can connect local sensors, while USART can provide a link to a supervisory controller. For industrial deployment, verify the operating-temperature grade and protect analog inputs from transients and ground noise.
پێشنیارکراو
Temperature and Process Control
The PIC16F767-I/SO can implement a compact closed-loop temperature or process controller by combining analog feedback with timer-based actuator drive. The 11-channel, 10-bit A/D converter accepts multiple sensor inputs, and the three Capture/Compare/PWM functions generate control signals for heaters, valves, or motor drivers. A 20 MHz clock provides ample timing headroom for proportional-integral-derivative calculations, display updates, and communication without an external processor. PWM output can reduce mechanical actuator drive compared with a fixed on-off output. Validate control-loop timing and output drive levels against the load, and use external transistor or driver circuitry rather than driving high-current actuators directly from a microcontroller pin.
پێشنیارکراو
Motor and Valve Interface Control
The PIC16F767-I/SO is appropriate for small embedded controllers that coordinate motor, valve, or pump functions using timers and PWM. Three timers plus three Capture/Compare/PWM modules allow position sensing, period measurement, and proportional actuator output, while 25 I/O pins leave room for limit switches, encoders, status indicators, and safety inputs. The 20 MHz clock allows the controller to combine motion routines with USART diagnostics or SPI/I2C sensor access. Because microcontroller outputs are intended for logic-level signaling, use gate drivers, transistors, or motor-driver ICs for inductive and high-current loads. Verify starting current, flyback requirements, and timing margins in the final power stage.
پێشنیارکراو
RS-232 and RS-485 Data Terminal
The PIC16F767-I/SO works well as the control and protocol engine for a compact serial data terminal. Its USART handles asynchronous communication, while the separate synchronous serial port can support SPI or I2C for local sensors, memory, or display peripherals. The 14 KB flash program area supports protocol handling and buffering, and the 20 MHz clock provides adequate throughput for command parsing and application logic. For industrial RS-485 links, add an appropriate transceiver such as the SN65HVD05D; for point-to-point RS-232, add a suitable line driver. The microcontroller is not the physical-layer interface, so voltage levels, isolation, termination, and ESD protection must be addressed separately.
پێشنیارکراو
LED Lighting and Dimming Controller
The PIC16F767-I/SO can control LED drivers and illumination systems where multiple channels require PWM and coordinated timing. Three Capture/Compare/PWM modules generate dimming outputs, while the 11-channel, 10-bit A/D converter can monitor current, temperature, or ambient-light-related signals. The 20 MHz processing speed supports sequencing, fading, status reporting, and communication over SPI, I2C, or USART. This arrangement is appropriate for compact industrial or instrument illumination rather than direct high-power LED drive. Use constant-current LED drivers or suitable transistor stages for the light source, keep analog sensing paths away from switching nodes, and verify that the selected PWM frequency remains above audible or visible interference concerns.
پێشنیارکراو
Compact Instrumentation and Data Logger
The PIC16F767-I/SO provides a practical control core for compact instruments that sample analog channels and retain configuration or records. Its 14 KB flash stores firmware and nonvolatile parameters, 368 bytes of RAM supports working buffers, and the 11-channel, 10-bit A/D converter handles front-panel or sensor inputs. The USART can stream readings to a host computer, while SPI or I2C can connect to flash storage, a display, or a real-time clock. The 28-pin SOIC package also leaves sufficient pins for switches, status lights, and alarm outputs. When logging continuously, account for write endurance, power-loss protection, and the data rate supported by the selected external memory or host interface.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ PIC16F767-I/SO — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | PIC16F767T-I/SO | PIC16F767-E/SO | PIC16F767T-E/SO |
|---|---|---|---|---|
| Package | 28-pin SOIC | 28-pin SOIC | 28-pin SOIC | 28-pin SOIC |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Program Memory | 14 KB | 14 KB | 14 KB | 14 KB |
| RAM | 368 bytes | 368 bytes | 368 bytes | 368 bytes |
| A/D Converter | 11 channels at 10 bits | 11 channels at 10 bits | 11 channels at 10 bits | 11 channels at 10 bits |
| I/O Pins | 25 pins | 25 pins | 25 pins | 25 pins |
| Timers | 3 | 3 | 3 | 3 |
| Capture/Compare/PWM Modules | 3 | 3 | 3 | 3 |
| Serial Interfaces | USART plus SPI or I2C | USART plus SPI or I2C | USART plus SPI or I2C | USART plus SPI or I2C |
| Operating Temperature Grade | -I ordering suffix | T-I ordering suffix | -E ordering suffix | T-E ordering suffix |
جیاکەرەوە سەرەکییەکان
- Integrated mixed-signal and serial-control capability (بەراورد بەPIC16LC620-04E/SO)
- Same PCB footprint for family migration (بەراورد بەPIC16F767T-I/SO)
- 20 MHz performance within an 8-bit embedded-control architecture (بەراورد بەPIC16LC620-04E/SO)
تێبینییەکانی دیزاین
Follow the Microchip Technology PIC16F767 datasheet layout recommendations for the 28-pin SOIC configuration. Place the required supply bypass capacitor close to the VDD and VSS pins, keep analog inputs away from high-current switching nodes, and provide a clean ground return for the A/D converter. Preserve access to MCLR/VPP, OSC1, and OSC2 because these connections can be required for programming, reset, or clock operation.
Plan the PCB for the exact 28-pin SOIC land pattern and verify pin 1 orientation against the package marking. Several Port A and Port C pins have alternate analog, timer, interrupt, and serial functions, so assign those pins before finalizing the schematic. Avoid routing oscillator traces beside noisy power stages and keep programming or clock test points accessible for production troubleshooting.
Do not treat a shared SOIC package as proof of drop-in compatibility. The PIC16LC620-04E/SO differs materially: its stated maximum clock is 4 MHz versus 20 MHz, and its connectivity is described as lacking the target device's I2C, SPI, and USART combination. A valid substitution must preserve the physical footprint, firmware behavior, timing expectations, peripheral assignments, and environmental requirements.
Confirm the device's permitted supply range and current limits in the manufacturer datasheet before applying power. Use a regulator with appropriate transient response and noise characteristics for sensitive analog measurements, and decouple the supply locally rather than relying only on bulk capacitance elsewhere on the board. Account for the 20 MHz operating mode when estimating switching activity, supply current, and thermal rise.
زانیاری پابەندبوون
The manufacturer product information identifies the device as active but does not state the requested environmental-compliance statuses. These fields remain unknown pending confirmation from Microchip Technology or the orderable-part documentation.