Microchip Technology

PIC16F818-E/SS - 20MHz 8-Bit Flash MCU | Microchip Technology

MPN: PIC16F818-E/SS ✓ چالاک
20-pin SSOP Package 20 MHz Speed 1.75 KB (1K x 14 words) Memory
MOQ: 1 |

PIC16F818-E/SS گشتی

Microchip Technology PIC16F818-E/SS is an 8-bit CMOS Flash microcontroller with a 20 MHz maximum operating frequency, 1.75 KB (1K x 14 words) of program memory, 128 bytes of RAM, and 16 I/O pins in a 20-pin SSOP package. The -E suffix identifies the extended-temperature grade, while /SS identifies the SSOP package.

A microcontroller is a programmable semiconductor that integrates a CPU core, memory, I/O ports, and peripherals into one device. The PIC16F818 belongs to the PIC16 family of 8-bit RISC microcontrollers, a level of the broader embedded-controller hierarchy that sits between simple fixed-function logic and higher-performance 16- or 32-bit processors. Its small memory footprint and compact package make it appropriate for compact control systems, sensor interfaces, and low-cost embedded products.

The PIC16F818-E/SS provides 128 bytes of EEPROM data memory, a capture/compare/PWM peripheral, and a synchronous serial port configurable for either 3-wire SPI or 2-wire I²C communication. Five 10-bit analog-to-digital converter channels support direct sensing of analog inputs. An 8 MHz internal oscillator is identified by Microchip, while the product listing also identifies support for operation up to 20 MHz. Its 35 single-word instruction set and 200 ns instruction execution capability support compact, responsive embedded control routines.

The device is particularly useful when a design needs several mixed-signal inputs but only modest code and data storage. The 10-bit ADC provides four times the resolution of an 8-bit converter, helping preserve small analog-signal changes. The configurable SPI or I²C interface allows the controller to communicate with sensors, displays, memories, and other digital peripherals. PWM and capture/compare functions can support motor, lighting, timing, or signal-generation tasks without requiring separate peripheral devices.

Typical applications include environmental monitoring, industrial control panels, compact sensor nodes, consumer appliances, and low-cost embedded instruments. The 128-byte EEPROM is useful for retaining calibration values, configuration data, counters, or operating history when nonvolatile storage is required. The internal oscillator also reduces external component count in designs that do not require a precise external timebase.

Board design should reserve the complete 20-pin SSOP land pattern and follow the pin assignments and decoupling guidance in the manufacturer datasheet. Confirm the operating voltage, oscillator, programming, and peripheral limits against the exact device revision before releasing a layout. Treat the SSOP as a surface-mount package with fine-pitch leads and plan assembly access for programming and inspection.

This product page combines the manufacturer specifications with purchasing guidance, same-footprint alternatives, interface-focused application descriptions, and design guidance. Those engineering details help distinguish an electrically similar MCU from a genuinely pin-compatible replacement and make the PIC16F818-E/SS easier to evaluate for embedded-control projects.

جێگرەوەکانی جێگۆڕکێ بۆ PIC16F818-E/SS — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC16F818-E/SS (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, ADC, Internal Oscillator, Operating Temperature, Timers.

Microchip Technology
Package: 18-SOIC (0.295 in / 7.5 mm width)
ADC: 5 channels, 10-bit
Internal Oscillator: 8 MHz (factory calibrated)
Microchip Technology
Package: 20-pin SSOP (5.30 mm body, 0.65 mm pitch)
ADC: 10-bit, 5 channels
Operating Temperature: -40C to +85C (Industrial)
Microchip Technology
Package: 20-SSOP (SS)
ADC: 10-bit, 5 channels
Operating Temperature: -40C to +85C
Microchip Technology
Package: 20-pin SSOP (5.30 mm body width)
ADC: 10-bit, up to 5 channels
Operating Temperature: -40C to +125C (E grade, extended)
Microchip Technology
ADC: 10-bit
Internal Oscillator: 8 MHz (software-tunable via OSCTUNE)
Microchip Technology
Package: 20-pin SSOP (5.30 mm / 0.209")
ADC: 5 channels, 10-bit resolution
Internal Oscillator: 8 MHz (software selectable)

PIC16F818-I/SS

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 20-pin SSOP
8-bit PIC16 RISC · 1.75 KB (1K x 14 words) · 128 bytes · 128 bytes · 20 MHz · 200 ns · 16 · 10-bit, 5 channels

پەیوەندی بۆ نرخ

بینینی داتاشیت →

PIC16F819-E/SS

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 20-pin SSOP
Same 20-pin SSOP family and 20 MHz class, with 2.25 KB program memory versus 1.75 KB, approximately 29% more Flash; firmware and peripheral compatibility require verification.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

PIC16F819-I/SS

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Microchip Technology
📦 20-pin SSOP
PIC16 8-bit RISC (Harvard) · 3.5 KB (2K x 14) · 256 bytes · 256 bytes · 20 MHz (5 MIPS, 200 ns instruction cycle) · 8 MHz (software selectable) · 4.0 V to 5.5 V (I/SS industrial grade) · 16

پەیوەندی بۆ نرخ

بینینی داتاشیت →

PIC16F628-I/SS

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 20-pin SSOP
Same 20-pin SSOP package and 20 MHz class; Flash capacity is 2.25 KB versus 1.75 KB, approximately 29% higher, while ADC and memory-map differences require schematic and firmware review.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

PIC16F627-I/SS

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 20-pin SSOP
Same 20-pin SSOP footprint and 20 MHz class; program memory is approximately equal at 1.75 KB, but ADC, EEPROM, interrupt, and peripheral details must be checked for functional equivalence.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

PIC16F818-E/SS زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type 8-bit CMOS Flash microcontroller
Maximum CPU Frequency 20 MHz
Program Memory 1.75 KB (1K x 14 words)
Data RAM 128 bytes
EEPROM Data Memory 128 bytes
General-Purpose I/O Pins 16 pins
ADC Resolution 10 bits
ADC Channels 5 channels
Internal Oscillator 8 MHz
Instruction Execution Time 200 ns
Instruction Set 35 single-word instructions
Serial Interface Configurable as 3-wire SPI or 2-wire I2C
Timer Peripheral Capture/compare/PWM
پاکێج 20-pin SSOP
جۆری دامەزراندن Surface mount
Temperature Grade Extended temperature
Architecture PIC16 8-bit RISC
دۆخی RoHS Unknown
REACH Status Unknown
AEC-Q100 Qualification Not applicable

ڕێنمایی ڕێکخستنی پینی PIC16F818-E/SS 20-pin ssop

ڕێکخستنی پین بۆ PIC16F818-E/SS (پاکێجی 20-pin ssop). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 20-pin ssop بۆ PIC16F818-E/SS

هیچ داتای وردی پینئاوت بەردەست نییە بۆ PIC16F818-E/SS.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

PIC16F818-E/SS گونجاوە بۆ 6 بەکارھێنانs: Environmental Sensor Node, Temperature and Humidity Controller, Compact Motor and PWM Driver, Digital Panel and User Interface, Battery-Powered Sensor Module, Appliance Control Module.

🧩

Environmental Sensor Node

The PIC16F818-E/SS fits a compact environmental sensor node because its five 10-bit ADC channels can measure temperature, light level, or resistive sensors without separate converters. The 16 I/O pins provide capacity for sensor enable signals, indicators, and digital status inputs, while the 128-byte EEPROM can preserve calibration constants or minimum and maximum readings. Its configurable synchronous serial port supports either 3-wire SPI or 2-wire I2C, allowing the node to share a bus with an external sensor or radio module. The 20 MHz operating class helps the firmware sample, filter, and transmit data promptly, although the limited 1.75 KB Flash and 128-byte RAM suit compact algorithms rather than large protocol stacks.

🏭

Temperature and Humidity Controller

A temperature-control product can use the PIC16F818-E/SS to acquire analog sensor signals through its five 10-bit ADC channels and drive a heater or fan through timer-capable I/O. The capture/compare/PWM resource can simplify timing-based actuator control, and the 128-byte EEPROM is useful for storing calibration offsets, setpoints, or operating counters. The MCU's 8 MHz internal oscillator can support a compact board without an external crystal when clock accuracy requirements permit. With 1.75 KB of program memory and 128 bytes of RAM, the device is most appropriate for direct control rather than elaborate user-interface or connectivity software.

🔧

Compact Motor and PWM Driver

The PIC16F818-E/SS is appropriate for small fan, pump, lamp, or hobby-motor controls where PWM-based modulation is needed. Its capture/compare/PWM peripheral can generate or measure timing signals, and the 16 available I/O pins allow separate control of an enable input, direction signal, fault input, and status indicators. A 10-bit ADC channel can supervise a current or supply signal if the application requires basic feedback. The 20 MHz CPU class provides enough timing margin for a straightforward closed-loop routine, while 128 bytes of EEPROM can retain operating limits. Firmware should include conservative startup states and valid output states for every reset condition.

📺

Digital Panel and User Interface

The PIC16F818-E/SS can serve as the controller for a compact keypad, display, menu, or configurable control panel. Sixteen I/O pins are useful for scanning switches and driving discrete indicators, while the 10-bit ADC can support analog controls when a dedicated human interface is unnecessary. The synchronous serial port can connect to a display or serial input device through SPI or I2C, and 128 bytes of EEPROM can retain settings between power cycles. The device's constrained 1.75 KB Flash and 128-byte RAM make it better suited to simple menus and state machines than graphics-heavy interfaces, but they are adequate for focused embedded panels with compact code and no heavy buffering.

⚡

Battery-Powered Sensor Module

A small battery-powered sensor module benefits from the PIC16F818-E/SS because it offers 16 I/O pins, five 10-bit ADC channels, and an internal 8 MHz oscillator in a 20-pin SSOP package. The oscillator can reduce external clock components, and the EEPROM can hold configuration data or counters without consuming RAM. SPI or I2C connectivity enables use with low-power sensor and communication devices. The MCU's small 1.75 KB Flash and 128-byte RAM are appropriate for duty-cycled acquisition routines, but actual battery life depends on the selected sleep modes, operating voltage, peripheral load, and external sensor behavior. Power gating and board leakage should be evaluated alongside the application firmware.

🏭

Appliance Control Module

The PIC16F818-E/SS can coordinate a small appliance subsystem containing switches, sensors, indicators, and an optional serial interface. Five 10-bit ADC channels allow analog monitoring, while the 16 I/O pins support discrete controls and the capture/compare/PWM block supports timing-sensitive loads. Its 128-byte EEPROM can retain calibration, usage counters, or selected operating modes across resets. The 20 MHz operating class and 200 ns instruction execution provide responsive control without requiring a large processor, but the memory limits make the MCU better suited to deterministic embedded logic than graphical appliances or connectivity-intensive products. Firmware validation should cover startup, brownout, sensor faults, and actuator shutdown states.

کورتەی بەرهەمە پێشنیارکراوەکان

PIC16F818-I/SS Microchip Technology بەکارهێنراوە لە: Environmental Sensor Node, Temperature and Humidity Controller, Compact Motor and PWM Driver, Digital Panel and User Interface, Battery-Powered Sensor Module, Appliance Control Module PIC16F819-I/SS Microchip Technology بەکارهێنراوە لە: Environmental Sensor Node, Battery-Powered Sensor Module PIC16F627-I/SS Same-package PIC16 control alternative بەکارهێنراوە لە: Temperature and Humidity Controller, Appliance Control Module PIC16F628-I/SS Nearby PIC16 family PWM-control option بەکارهێنراوە لە: Compact Motor and PWM Driver PIC16F819-E/SS Additional-Flash same-package family alternative بەکارهێنراوە لە: Digital Panel and User Interface
What are the key specifications of PIC16F818-E/SS that engineers should know?
The PIC16F818-E/SS is a 20-pin, 8-bit Flash MCU rated for operation up to 20 MHz, with 1.75 KB of program memory, 128 bytes of RAM, 128 bytes of EEPROM, and 16 I/O pins. According to the Microchip PIC16F818/819 Data Sheet, it includes five 10-bit ADC channels, capture/compare/PWM, an 8 MHz internal oscillator, and a synchronous serial interface configurable for SPI or I2C.
Where can I download the PIC16F818 datasheet PDF?
The official PIC16F818/819 Data Sheet is available as a PDF from Microchip at https://ww1.microchip.com/downloads/en/DeviceDoc/39598e.pdf. The document covers the 18-pin and 20-pin enhanced Flash microcontroller family, including the PIC16F818-E/SS 20-pin SSOP configuration, electrical characteristics, memory organization, peripherals, and package information.
Where can I find the PIC16F818 pinout?
The authoritative PIC16F818 pinout is shown in the pin-description and package drawings in the Microchip PIC16F818/819 Data Sheet. The PIC16F818-E/SS uses the 20-pin SSOP configuration and must be assigned against that package drawing rather than the 18-pin variant. Use the data-sheet pin table to verify oscillator, programming, I/O, ground, and supply connections before laying out the PCB.
What is the operating frequency of PIC16F818-E/SS?
The PIC16F818-E/SS supports operation up to 20 MHz, and the manufacturer also identifies an 8 MHz internal oscillator. According to the Microchip PIC16F818/819 Data Sheet, the device executes instructions in 200 ns and supports a 35-instruction single-word set. The exact clock configuration and maximum frequency should be confirmed for the operating voltage and temperature conditions used in the design.
How much memory does the PIC16F818-E/SS have?
The PIC16F818-E/SS contains 1.75 KB of Flash program memory, equivalent to 1K x 14 words, together with 128 bytes of data RAM and 128 bytes of EEPROM data memory. These figures are identified in the Microchip product listing and PIC16F818/819 Data Sheet. The EEPROM provides nonvolatile storage for calibration parameters, counters, configuration values, or retained operating history.
What interfaces and analog functions are available on PIC16F818-E/SS?
The PIC16F818-E/SS includes a synchronous serial port configurable as 3-wire SPI or 2-wire I2C, a capture/compare/PWM peripheral, and five 10-bit ADC channels. According to the Microchip product page, these resources make the MCU suitable for sensor acquisition, digital peripheral communication, timing, and basic waveform-generation duties in compact embedded systems.
What is the difference between PIC16F818-E/SS and PIC16F818-I/SS?
The primary documented difference is the temperature grade: PIC16F818-E/SS carries the extended-temperature designation, while PIC16F818-I/SS is the industrial-temperature ordering option. Both retain the same PIC16F818 device identity, 20 MHz maximum frequency, 1.75 KB Flash memory, 128-byte RAM, and 20-pin SSOP package. The exact operating-temperature limits should be taken from the manufacturer ordering table.
What can replace the PIC16F818-E/SS on the same PCB?
The closest same-footprint replacement is the PIC16F818-I/SS because it retains the PIC16F818 identity and 20-pin SSOP package while changing the documented temperature-grade suffix. PIC16F819-I/SS and PIC16F819-E/SS provide another migration path with more Flash program memory, although firmware, memory-size, and peripheral differences must be reviewed. Confirm every pin and operating limit against the manufacturer data sheet before production use.
Is PIC16F818-I/SS the same as PIC16F818-E/SS?
PIC16F818-I/SS and PIC16F818-E/SS share the PIC16F818 architecture, 20 MHz maximum frequency, 1.75 KB program memory, 128-byte RAM, 16 I/O pins, and 20-pin SSOP package. They are not identical ordering codes: the -E and -I suffixes denote different temperature grades. Choose according to the required ambient-temperature range and production qualification criteria.
When should I choose PIC16F818-E/SS instead of PIC16F818-I/SS?
Choose PIC16F818-E/SS when the application requires the extended-temperature ordering grade and otherwise fits the PIC16F818 20-pin SSOP electrical and pin configuration. Choose PIC16F818-I/SS when the industrial-temperature grade is sufficient and procurement or qualification requirements favor that variant. Both provide the same core memory sizes, peripherals, package, and 20 MHz operating class.
Is PIC16F818-E/SS suitable for sensor and control applications?
The PIC16F818-E/SS is suitable for compact sensor and control designs because it combines five 10-bit ADC channels, 16 I/O pins, 128 bytes of EEPROM, and configurable SPI or I2C communication. According to the Microchip product page, its mixed-signal peripherals support sensing and external-device communication. Its 1.75 KB program memory and 128-byte RAM suit small control tasks rather than complex application processors.
What is the best Microchip equivalent for PIC16F818-E/SS?
The best direct same-package starting point is PIC16F818-I/SS because it preserves the PIC16F818 device, 20-pin SSOP footprint, 20 MHz operating class, 1.75 KB Flash, and 128-byte RAM. PIC16F819-I/SS is a nearby family option with more program memory, but it is not automatically firmware- or peripheral-identical. Verify the pin table, memory map, interrupts, ADC channels, and serial interfaces before substitution.
Where can I buy PIC16F818-E/SS online?
Use the Request a Quote form on this page to request PIC16F818-E/SS availability, current unit pricing, minimum order quantity, and lead time from XAIPART. The manufacturer product page and the Microchip datasheet support technical evaluation, while the quotation form provides the appropriate commercial channel for the exact 20-pin SSOP ordering code.
What is the price of PIC16F818-E/SS?
Current PIC16F818-E/SS pricing is obtained through the Request a Quote form on this page because commercial terms can change with quantity, supply, and package availability. Submit the exact MPN PIC16F818-E/SS and required order quantity to receive a current quotation for the 20-pin SSOP device.
What is the lead time and stock status for PIC16F818-E/SS?
Current stock status and lead time for PIC16F818-E/SS should be requested through the Request a Quote form on this page. Include the exact MPN, annual forecast, production schedule, and required package quantity so procurement can confirm allocation and delivery timing for the extended-temperature 20-pin SSOP configuration.

داتای سەرچاوەی ئەندازیاری بۆ PIC16F818-E/SS — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose PIC16F818-E/SS when the design needs a compact 8-bit Flash MCU with five 10-bit ADC channels, 16 I/O pins, configurable SPI or I2C, 128 bytes of RAM, and 128 bytes of EEPROM in a 20-pin SSOP package. PIC16F818-I/SS is the closest alternative when the industrial-temperature grade is sufficient; it preserves the same core memory, speed class, and package. PIC16F819-E/SS or PIC16F819-I/SS can be preferable when approximately 29% more program memory is useful and the firmware has been validated against the PIC16F819 memory map and peripherals. PIC16F628-I/SS and PIC16F627-I/SS offer different ADC, EEPROM, and peripheral arrangements in the same package class, so they should be treated as redesign candidates rather than automatic substitutions. For every alternative, verify pin assignments, oscillator limits, reset behavior, programming, interrupts, ADC configuration, and operating-temperature requirements.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە PIC16F818-I/SS PIC16F819-E/SS PIC16F819-I/SS PIC16F628-I/SS PIC16F627-I/SS
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 20-pin SSOP 20-pin SSOP - same 20-pin SSOP - same 20-pin SSOP - same 20-pin SSOP - same 20-pin SSOP - same
Product Type 8-bit CMOS Flash microcontroller 8-bit CMOS Flash microcontroller 8-bit CMOS Flash microcontroller 8-bit CMOS Flash microcontroller 8-bit CMOS Flash microcontroller 8-bit CMOS Flash microcontroller
Maximum CPU Frequency 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz
Program Memory 1.75 KB (1K x 14 words) 1.75 KB (1K x 14 words) 2.25 KB 2.25 KB 2.25 KB 1.75 KB
Data RAM 128 bytes 128 bytes 128 bytes 128 bytes 128 bytes 128 bytes
EEPROM Data Memory 128 bytes 128 bytes 128 bytes 128 bytes 256 bytes 128 bytes
ADC Configuration 5 channels at 10 bits 5 channels at 10 bits 5 channels at 10 bits 5 channels at 10 bits 8 channels at 10 bits 8 channels at 10 bits
General-Purpose I/O 16 pins 16 pins 16 pins 16 pins 16 pins 16 pins
Temperature Grade Extended temperature Industrial temperature Extended temperature Industrial temperature Industrial temperature Industrial temperature
Synchronous Serial Interface Configurable SPI or I2C Configurable SPI or I2C Configurable SPI or I2C Configurable SPI or I2C Configurable SPI or I2C Configurable SPI or I2C

جیاکەرەوە سەرەکییەکان

  • Closest temperature-grade alternative (بەراورد بەPIC16F818-I/SS)
  • Additional program memory without changing the 20-pin SSOP footprint (بەراورد بەPIC16F819-E/SS)
  • Mixed-signal flexibility in the same package (بەراورد بەPIC16F628-I/SS)

تێبینییەکانی دیزاین

Create the PCB footprint for the exact 20-pin SSOP variant and verify it against the package drawing in the Microchip PIC16F818/819 Data Sheet before fabrication. Do not reuse an 18-pin land pattern or assume that SSOP and SOIC are mechanically interchangeable. Confirm pin-1 orientation, courtyard clearance, lead pitch, solder-mask and paste geometry, and the placement of any exposed thermal or ground connection described for the selected package.

Follow the manufacturer decoupling and input/output capacitor recommendations for the selected oscillator and configuration. Place the required capacitors close to their associated power and ground pins, keep the ground return path short, and avoid routing high-current or switching-node copper through the MCU area. Verify the design across the full input-voltage range because the available 20 MHz frequency and current limits are tied to operating conditions.

Do not treat a same-package family member as automatically interchangeable. PIC16F819, PIC16F628, and PIC16F627 variants can differ in program memory, interrupt behavior, ADC channels, and peripheral details even when the 20-pin SSOP outline is retained. Before substituting a device, compare the complete pin-description table, oscillator connections, reset and programming pins, peripheral registers, memory map, and electrical limits in the manufacturer documentation.

Separate analog inputs from switching or digital return paths to preserve the benefit of the 10-bit converter. Use a compact analog ground strategy, route sensor traces away from high-current outputs, and connect the analog reference according to the manufacturer pin guidance. If the I2C interface is used, keep its routing compact and inspect rise and fall times with the intended bus capacitance rather than relying only on nominal clock rate.

For battery-powered designs, calculate average and peak current from the actual wake, acquisition, processing, and communication intervals. The presence of an internal 8 MHz oscillator can reduce external clock components, but it does not by itself establish low system power. Use the nanoWatt power-control procedures in the manufacturer documentation, disable unused peripherals, and account for board leakage, pull resistors, and external sensor consumption.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The manufacturer data establishes the PIC16F818 device family and extended-temperature ordering suffix but does not state the requested environmental-compliance classifications.

داتا پشتڕاستکراوەتەوە لە: 2026-11-04 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

PIC16F818 datasheet PIC16F818 pinout PIC16F818 datasheet pdf PIC16F818 schematic diagram PIC16F818 programming PIC16F818 pdf PIC16F818-E/SS datasheet PIC16F818-E/SS pinout PIC16F818-E/SS schematic PIC16F818-E/SS programming PIC16F818-E/SS equivalent PIC16F818-E/SS replacement PIC16F818-E/SS 20-pin SSOP PIC16F818-E/SS price Microchip PIC16F818-E/SS

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology PIC16F818-E/SS PIC16F818-I/SS PIC16F819-E/SS PIC16F819-I/SS PIC16F628-I/SS PIC16F627-I/SS PIC16 8-bit RISC microcontroller embedded controller semiconductor CMOS Flash memory nanowatt technology 20-pin SSOP surface-mount package 10-bit analog-to-digital converter ADC EEPROM capture/compare/PWM SPI I2C internal oscillator output comparison embedded sensor control
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ