Microchip Technology

PIC16F84A-04/P - 4MHz 8-Bit Flash Microcontroller | Microchip

MPN: PIC16F84A-04/P ✓ چالاک
4 V to 5.5 V Vdss 18-pin PDIP Package 4 MHz Speed 1.75 KB Flash (1024 x 14-bit words) Memory
MOQ: 1 |

PIC16F84A-04/P گشتی

The Microchip Technology PIC16F84A-04/P is an 8-bit CMOS Flash and EEPROM microcontroller rated for operation up to 4 MHz and packaged in an 18-pin PDIP. It provides 1024 words of program Flash memory, 68 bytes of data RAM, and 64 bytes of EEPROM memory, while exposing 16 general-purpose I/O pins. Its architecture uses 35 single-word instructions with a 200 ns instruction execution time, making it suitable for compact embedded control, measurement, and legacy PIC peripheral designs.

An 8-bit microcontroller is a programmable semiconductor that executes a fixed-width instruction set and reads inputs, processes data, and controls outputs through embedded firmware. Within the Microchip product hierarchy, the PIC16F84A belongs to the PIC16 family of 8-bit RISC microcontrollers, combining general-purpose digital control with Flash program memory and EEPROM data retention. This combination allows field reprogramming without removable nonvolatile memory.

The PIC16F84A-04/P provides 1.75 KB of Flash program memory, equivalent to 1024 14-bit program words. Its 68 bytes of data RAM support working variables, while 64 bytes of EEPROM retain configuration or operating parameters when the device loses its supply. The 16 I/O pins can be assigned to digital inputs and outputs, with several port pins also supporting peripheral or interrupt functions described by the manufacturer datasheet.

The reduced 4 MHz speed grade provides a practical balance between processing performance and clock-related requirements for established PIC16 designs. At this speed, the device retains a compact instruction architecture with 200 ns execution time and a simple set of 35 single-word instructions. This makes the PIC16F84A-04/P appropriate for educational instruments, simple sequencers, appliance controls, programmable logic, and legacy products that depend on the established PIC16F84A pin arrangement.

Typical uses include digital control panels, simple motor sequencers, laboratory demonstrators, temperature-monitoring controllers, and compact embedded products that need nonvolatile configuration storage. Because the device is supplied in an 18-pin PDIP package, it is particularly suitable for through-hole prototyping, educational kits, and legacy repair work where a surface-mount package would complicate assembly.

When replacing an existing PIC16F84A design, check the clock configuration, reset behavior, EEPROM usage, and interrupt requirements before changing the device. The -04 suffix denotes the 4 MHz speed grade, while /P denotes the PDIP package. Use the manufacturer pin-description table and programming specification to preserve the board-level pin mapping and confirm timing assumptions.

This page combines the manufacturer datasheet, package and memory details, programming guidance, and verified cross-reference results into an engineering-focused overview for designers maintaining or creating PIC16F84A-based products.

جێگرەوەکانی جێگۆڕکێ بۆ PIC16F84A-04/P — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC16F84A-04/P (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Timers, Operating Temperature, Core Architecture, Program Memory Size.

Microchip Technology
Package: 18-pin PDIP (DIP-18)
Timers: Timer0, Timer1 (16-bit), Timer2 (8-bit with PWM)
Operating Temperature: 0C to +70C (commercial)
Microchip Technology
Package: 18-pin PDIP (DIP-18, 0.300 inch)
Timers: 1 x 8-bit (TMR0 with 8-bit prescaler)
Operating Temperature: -40C to +85C (industrial)
Microchip Technology
Package: 18-pin PDIP (P, 0.300 inch / 7.62 mm, through-hole)
Operating Temperature: 0C to +70C (commercial; -40C to +85C for -I grade)
Program Memory Size: 1.75 KB (1K x 14 words)
Microchip Technology
Package: 18-pin PDIP (P)
Timers: Timer0 (8-bit w/ 8-bit prescaler), Watchdog Timer with dedicated RC oscillator
Core Architecture: PIC Harvard 8-bit RISC
Microchip Technology
Package: 18-pin PDIP (P)
Timers: 1 x 8-bit Timer0 with watchdog
Operating Temperature: -40C to +85C (Industrial)
Microchip Technology
Timers: 1 x 8-bit (TMR0) with 8-bit prescaler
Operating Temperature: 0 °C to +70 °C (commercial, '20' speed)
Program Memory Size: 1.75 KB (1K x 14)
Microchip Technology
Package: 18-pin PDIP (Through-Hole, 0.300 inch / 7.62 mm pitch)
Timers: TMR0 (8-bit with prescaler), WDT
Core Architecture: PIC Mid-Range 8-bit RISC
Microchip Technology
Package: PDIP-18 (P)
Timers: 1 x 8-bit Timer0 + Watchdog
Operating Temperature: -40C to +85C (Industrial)
Microchip Technology
Timers: 1 x 8-bit + Watchdog
Operating Temperature: -40 C to +125 C
Program Memory Size: 3.5 KB (2K x 14)
Microchip Technology
Package: 18-pin PDIP (0.300 in / 7.62 mm)
Operating Temperature: -40C to +125C (extended, "E" suffix)
Core Architecture: PIC16C (8-bit RISC, Harvard)
Microchip Technology
Package: 18-pin PDIP (DIP-18, 0.300 inch / 7.62 mm)
Timers: 2 x 8-bit, 1 x 16-bit
Operating Temperature: 0 C to +70 C (Commercial)
Microchip Technology
Package: 18-pin PDIP (0.300 inch, 7.62 mm)
Timers: 1 x 8-bit (TMR0) with 8-bit prescaler
Operating Temperature: 0C to +70C (commercial)

PIC16F84A-04I/P

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 18-pin PDIP
PIC 8-bit RISC (Harvard) · 14-bit · 35 single-word · 4 MHz (-04 speed grade) · 200 ns at 4 MHz · 1.75 KB (1024 x 14 words) · 68 bytes · 64 bytes

پەیوەندی بۆ نرخ

بینینی داتاشیت →

PIC16F84A-04/P زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Microcontroller Type 8-bit CMOS Flash/EEPROM microcontroller
زۆرترین فرێکوێنسیی کاتژمێر 4 MHz
Program Memory 1.75 KB Flash (1024 x 14-bit words)
Data RAM 68 bytes
EEPROM Memory 64 bytes
General-Purpose I/O Pins 16 pins
Instruction Set 35 single-word instructions
Instruction Execution Time 200 ns
Architecture Advanced RISC
پاکێج 18-pin PDIP
جۆری دامەزراندن Through-hole
Program Memory Type Flash
Nonvolatile Data Memory EEPROM
ڤۆڵتیەی دابینکردن 4 V to 5.5 V
External Clock Frequency 4 MHz maximum for the -04 grade

ڕێکخستنی پینی PIC16F84A-04/P

Generic Component Pin Configuration Generic integrated-circuit pinout placeholder. Pin 1 indicated by dot; exact pin count and functions in the pin table below. 1 N 2 N-1 3 N-2 4 N-3 Pin Configuration See pin table below for pin functions Package-specific diagram not available
پین 1 MCLR/VPP/RE3 — Master clear reset, programming voltage, and multiplexed digital input or output
پین 2 RA0/AN0 — Port RA0 with multiplexed analog input
پین 3 RA1/AN1 — Port RA1 with multiplexed analog input
پین 4 RA2/AN2/VREF — Port RA2 with multiplexed analog input and voltage-reference function
پین 5 RA3/AN3/VREF+ — Port RA3 with multiplexed analog input and positive voltage-reference function
پین 6 RA4/T0CKI — Port RA4 with multiplexed timer clock input
پین 7 RA5/AN4/SS/C2OUT — Port RA5 with multiplexed analog, synchronous serial, and comparator functions
پین 8 VSS — Ground reference
پین 9 RB7 — Port RB7 digital input or output
پین 10 RB6 — Port RB6 digital input or output
پین 11 RB5 — Port RB5 digital input or output
پین 12 RB4 — Port RB4 digital input or output
پین 13 RB3/MCLR — Port RB3 digital input or output with master clear reset function
پین 14 RB2 — Port RB2 digital input or output
پین 15 RB1 — Port RB1 digital input or output
پین 16 RB0 — Port RB0 digital input or output
پین 17 OSC1 — Oscillator input
پین 18 OSC2/CLKOUT — Oscillator output with multiplexed clock output function

بەکارهێنانە باوەکان

PIC16F84A-04/P گونجاوە بۆ 6 بەکارھێنانs: Embedded Control and Sequencer, Educational Microcontroller Trainer, Appliance and Equipment Controller, Programmable Timer and Counter, Data Logger with EEPROM Storage, Legacy Product Repair and Retrofit.

⚡

Embedded Control and Sequencer

The PIC16F84A-04/P fits compact sequencing and discrete control systems because it combines 16 I/O pins with a 4 MHz clock and a 35-instruction architecture. A controller can read switches or sensors, update indicators, and drive relays or logic levels without a separate processor family. Its 68 bytes of RAM support basic state variables, while the 18-pin PDIP format simplifies through-hole assembly. Firmware must remain within the 1024-word Flash limit, and timing calculations should use the device’s 200 ns instruction execution rating at the selected clock frequency.

🔧

Educational Microcontroller Trainer

The PIC16F84A-04/P is well suited to electronics education because it exposes 16 I/O pins, uses a simple 35-single-word instruction set, and provides readily observable port states. Students can configure the I/O ports, exercise conditional branches, write EEPROM values, and study timer or interrupt behavior in a through-hole circuit. The 18-pin PDIP package is convenient for breadboards and perforated prototyping boards. Because the -04 device is limited to 4 MHz, instructional examples should avoid timing assumptions associated with the 20 MHz PIC16F84A grade.

🏭

Appliance and Equipment Controller

PIC16F84A-04/P can serve as the fixed-function controller in appliances and laboratory equipment where a keypad, indicator, sensor input, and actuator output must be coordinated. Its 16 I/O pins allow several signals to be managed concurrently, while EEPROM preserves settings after power removal. The 4 MHz grade is adequate for non-real-time user-interface logic, simple sensor conditioning, and sequenced outputs. Designers should leave margin in the 1024-word program-memory limit and use the datasheet pin table to manage functions that are shared between port I/O and internal peripherals.

⏱️

Programmable Timer and Counter

The PIC16F84A-04/P can implement simple event counters, elapsed-time measurement, and repetitive switching sequences using its integrated timer functions and interrupt handling. At 4 MHz, the controller offers a 200 ns instruction execution interval under the datasheet timing conditions, making it suitable for basic millisecond-scale control tasks. EEPROM can retain counters or operating profiles across power cycles. Firmware must account for interrupt latency, timer prescaler selection, and oscillator accuracy; for applications requiring much longer timing precision, an external clock or dedicated timer device may be preferable.

🖥️

Data Logger with EEPROM Storage

PIC16F84A-04/P can capture a limited set of operating parameters and store selected values in its 64 bytes of EEPROM for later retrieval. This makes it useful for small prototypes that must preserve configuration, counters, calibration offsets, or event flags rather than maintain a continuous high-volume log. Its 68 bytes of RAM provide working space, and the 16 I/O pins can connect simple sensors and status indicators. Storage endurance, write timing, and the usable data-memory organization must be taken from the manufacturer datasheet before defining the logging interval.

🔧

Legacy Product Repair and Retrofit

PIC16F84A-04/P is well matched to repair and continuity work involving products built around the established PIC16F84A architecture and 18-pin PDIP footprint. Its 4 MHz speed grade matches designs specified for -04 operation, while Flash program memory permits firmware replacement without a socketed ROM device. Before substituting the device, verify pin functions, reset and oscillator wiring, supply requirements, and application code. The Microchip migration document for the older PIC16F84 demonstrates why family similarity alone is not enough to approve an unverified replacement.

What are the key specifications of PIC16F84A-04/P that engineers should know?
The PIC16F84A-04/P is a 4 MHz, 8-bit CMOS microcontroller with 1.75 KB of Flash memory, 68 bytes of data RAM, 64 bytes of EEPROM, and 16 I/O pins in an 18-pin PDIP package. According to the Microchip PIC16F84A datasheet, the device executes a 35-instruction set with a 200 ns instruction execution time, making it a practical choice for compact embedded-control and legacy PIC projects.
Where can I download the PIC16F84A datasheet PDF?
The official PIC16F84A datasheet PDF is available from Microchip at https://ww1.microchip.com/downloads/en/devicedoc/35007b.pdf. It contains the device description, electrical characteristics, pin definitions, memory organization, and programming information needed to evaluate PIC16F84A-04/P. Use the manufacturer document for final PCB, timing, and firmware decisions.
What is the PIC16F84A-04/P pinout and pin diagram?
The PIC16F84A-04/P uses an 18-pin PDIP arrangement with port A at pins 1 through 7, ground at pin 8, port B at pins 9 through 16, and oscillator pins at pins 17 and 18. According to the Microchip PIC16F84A datasheet, pin 13 is also MCLR, while the oscillator pins are labeled OSC1 and OSC2/CLKOUT. Consult the pin-description table when assigning PCB functions.
How much Flash, RAM, and EEPROM does the PIC16F84A-04/P have?
The PIC16F84A-04/P provides 1.75 KB of Flash program memory, organized as 1024 words of 14-bit instructions, plus 68 bytes of data RAM and 64 bytes of EEPROM. The Microchip PIC16F84A datasheet identifies this combination as Flash/EEPROM-based nonvolatile storage, allowing firmware to be reprogrammed and configuration data to be retained.
What is the difference between PIC16F84A-04/P and PIC16F84A-20/P?
The primary difference is the maximum clock rating: PIC16F84A-04/P supports up to 4 MHz, while PIC16F84A-20/P supports up to 20 MHz. Both are 18-pin PDIP devices in the PIC16F84A family, but the 20 MHz grade requires faster clocking and must be reviewed against the electrical and timing limits in the manufacturer datasheet before substitution.
Can PIC16F84A-04I/P replace PIC16F84A-04/P?
PIC16F84A-04I/P is a pin-compatible 4 MHz, 18-pin PDIP member of the same PIC16F84A family and is the closest verified same-package alternative. The primary distinction is the device’s temperature grade, so the replacement should be selected only when its specified operating range covers the product’s environmental requirements. Firmware and board changes are generally unnecessary.
What can replace the PIC16F84A-04/P in a legacy design?
The closest verified drop-in replacement is PIC16F84A-04I/P because it retains the 4 MHz speed grade, 18-pin PDIP package, and PIC16F84A family architecture. Microchip’s PIC16F84-to-PIC16F84A migration document shows that moving from the older PIC16F84 to PIC16F84A requires a functional and electrical review, so legacy replacements should not be treated as automatically interchangeable.
When should I choose PIC16F84A-04/P over PIC16F84A-20/P?
Choose PIC16F84A-04/P when the design operates at or below a 4 MHz clock and does not require the faster processing capability of the 20 MHz grade. The -04 part can also be preferable in legacy systems where timing was designed around a slower oscillator. Choose the 20 MHz variant only when both the timing budget and electrical operating conditions support it.
Is the PIC16F84A-04/P suitable for a new embedded-control product?
The PIC16F84A-04/P is suitable for modest 8-bit control tasks that fit within 1024 program words, require 16 I/O pins, and benefit from a simple 35-instruction architecture. Its 4 MHz rating and 68 bytes of RAM limit complex timing, data logging, and protocol processing. Confirm the supply, peripheral, and programming requirements against the Microchip datasheet before committing.
Where can I buy PIC16F84A-04/P and check its current price and stock?
Use the Request a Quote form on this page to request the current price, stock status, and lead time for PIC16F84A-04/P. The 18-pin PDIP package and exact -04 suffix should be stated on the request so that the quotation matches the required speed grade and package rather than a related PIC16F84A variant.
What is the current lead time for PIC16F84A-04/P?
Submit PIC16F84A-04/P to the Request a Quote form on this page to obtain the current lead time and available order quantity. Lead time can change with inventory and exact package suffix, so it should be confirmed for the complete MPN at the time of quotation. The requested device must remain the 4 MHz, 18-pin PDIP grade.
Is PIC16F84A-04/P in stock?
Current inventory for PIC16F84A-04/P should be confirmed through the Request a Quote form on this page. Include the exact 18-pin PDIP package and 4 MHz grade in the request. This avoids confusion with SOIC, SSOP, industrial-temperature, or higher-speed variants that share the PIC16F84A family name.
How do I program a PIC16F84A-04/P?
Program the PIC16F84A-04/P through a Microchip-supported programming interface after connecting the appropriate clock, reset, programming, and power pins described in the device documentation. The PIC16F84A stores firmware in Flash, while 64 bytes of EEPROM are available for nonvolatile data. Use the programming specification and device datasheet to select the correct connector and programming voltage.
What programming examples are available for PIC16F84A-04/P?
PIC16F84A examples commonly demonstrate port I/O, EEPROM read and write operations, interrupt handling, timers, and external oscillator configuration. Because this device belongs to the established PIC16 architecture, examples must use the PIC16F84A instruction set and SFR map rather than code for an unrelated PIC family. Validate timing examples at the design’s actual clock frequency.
What is the PIC16F84A instruction set and execution time?
The PIC16F84A uses 35 single-word instructions, with most instructions executing in one cycle and program branches taking two cycles. According to the Microchip PIC16F84A datasheet, the device supports 200 ns instruction execution. This compact RISC-style instruction set simplifies legacy firmware maintenance while constraining processing throughput to the selected 4 MHz clock.
Is there an 18-pin PDIP package diagram for the PIC16F84A-04/P?
The PIC16F84A-04/P is supplied in an 18-pin PDIP package, and its numbered pin assignments are listed in the Microchip PIC16F84A datasheet. The package drawing should be interpreted together with the pin-description table because several pins have multiplexed functions, including MCLR, analog, timer, and oscillator-related functions. Do not infer pin functions from a different package variant.
What is the best Microchip equivalent for PIC16F84A-04/P?
PIC16F84A-04I/P is the closest verified Microchip equivalent because it preserves the 4 MHz speed grade, PIC16F84A architecture, and 18-pin PDIP footprint. The key engineering difference is the operating-temperature grade. Confirm that the alternative’s environmental limits exceed the product requirements and review the PIC16F84A datasheet before production substitution.
Does the PIC16F84A-04/P comply with RoHS and REACH?
The PIC16F84A-04/P is a leaded 18-pin PDIP device, and its exact RoHS and REACH declarations should be confirmed from the manufacturer’s current product-compliance documentation. The technical excerpt identifies the device as an 18-pin PDIP microcontroller but does not explicitly state the compliance result. Request the current compliance record before making a certification-dependent purchasing decision.

داتای سەرچاوەی ئەندازیاری بۆ PIC16F84A-04/P — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose PIC16F84A-04/P for new or maintained through-hole designs that require the established PIC16F84A 18-pin pinout, a 4 MHz clock ceiling, 1024 words of Flash, 68 bytes of RAM, and 64 bytes of EEPROM. Select PIC16F84A-04I/P when the PCB footprint and core device parameters are unchanged but a wider industrial temperature grade is required. PIC16F84A-20/P should be selected when the design specifically benefits from the higher 20 MHz clock rating and all timing assumptions are revalidated. Older PIC16F84 variants may appear in cross-reference searches, but Microchip’s migration documentation identifies functional and electrical changes, so they require a deliberate compatibility review rather than an automatic drop-in substitution. For new products, also compare the limited memory and 4 MHz performance against more capable microcontrollers when processing, connectivity, or data logging exceeds the PIC16F84A envelope.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە PIC16F84A-04I/P
Brand Microchip Technology Microchip Technology
Package 18-pin PDIP 18-pin PDIP - same package
Maximum Clock Frequency 4 MHz 4 MHz
Program Memory 1.75 KB Flash (1024 x 14-bit words) 1.75 KB Flash (1024 x 14-bit words)
Data RAM 68 bytes 68 bytes
EEPROM Memory 64 bytes 64 bytes
General-Purpose I/O 16 pins 16 pins
Instruction Set 35 single-word instructions 35 single-word instructions
Instruction Execution Time 200 ns 200 ns

جیاکەرەوە سەرەکییەکان

  • Exact 4 MHz legacy-compatible performance grade (بەراورد بەPIC16F84A-20/P)
  • Through-hole 18-pin package supports serviceable legacy construction (بەراورد بەPIC16F84A-04I/SO)
  • One-kiloword Flash program memory supports field reprogramming (بەراورد بەPIC16F84-04I/P)

تێبینییەکانی دیزاین

Design the supply rail around the manufacturer’s specified operating range and provide adequate decoupling close to VDD and VSS. The verified electrical excerpt identifies a 4 V to 5.5 V supply range for this device. Keep power traces short, use a low-inductance ground return, and separate sensitive analog or timing inputs from switching-node wiring. Because the PIC16F84A-04/P has no specified internal regulator in the available data, verify the external supply design against the full datasheet before layout release.

Preserve the 18-pin PDIP pin assignments exactly when converting an existing PIC16F84A board. OSC1 and OSC2 are pins 17 and 18, VSS is pin 8, and the two port blocks occupy pins 1 through 7 and 9 through 16. Route oscillator traces away from noisy digital or switching circuits, maintain the shortest practical oscillator loop, and use a stable ground plane. Pin multiplexing must be resolved in firmware as well as at the schematic level.

Do not confuse the -04 speed grade with PIC16F84A-20/P. The target supports 4 MHz, while the 20 MHz grade changes the available processing rate and associated timing conditions. Likewise, do not assume PIC16F84A-04I/P has an identical temperature rating; the I designation identifies a different grade. Check the exact ordering code, oscillator frequency, reset wiring, and firmware timing assumptions before replacing or refurbishing a board.

Use a socket when long-term field replacement and firmware servicing are priorities, but ensure the socket and PCB pad geometry are suitable for the 18-pin PDIP footprint. Where soldering is acceptable, protect the device from electrostatic discharge and verify the pin-one orientation against the package marking. Provide programming access or a programming fixture in the mechanical design so firmware updates do not require destructive package removal.

Respect the finite nonvolatile-memory resources: 1024 program words, 68 bytes of RAM, and 64 bytes of EEPROM. Avoid designs that require extensive buffering or continuous logging, and include wear-conscious write practices for EEPROM. Program branches take two cycles while most instructions take one cycle, so delay loops and timeout calculations must be recompiled and verified for the 4 MHz grade rather than copied from a 20 MHz project.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The PIC16F84A-04/P is a 18-pin PDIP device, but the available technical excerpts do not explicitly state its RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm current declarations with the manufacturer.

داتا پشتڕاستکراوەتەوە لە: 2026-11-04 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

pic16f84a 04 p datasheet pic16f84a datasheet pic16f84a microcontroller pic16f84a pinout pic16f84a price pic16f84a pin diagram pic16f84a programming examples pic16f84a instruction set pic16f84a block diagram pic16f84a programming pic16f84a datasheet pdf PIC16F84A-04/P pin diagram PIC16F84A-04/P replacement PIC16F84A-04/P programming examples PIC16F84A-04/P vs PIC16F84A-20/P

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology PIC16F84A-04/P PIC16F84A PIC16F84A-04I/P PIC16F84A-20/P PIC16F84-04I/P 8-bit microcontroller CMOS microcontroller Flash microcontroller EEPROM microcontroller RISC architecture PIC16 family 18-pin PDIP PDIP package family through-hole package embedded control program Flash memory EEPROM data memory general-purpose I/O instruction execution time microcontroller timer programmable logic RoHS REACH AEC-Q100
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ