Microchip Technology

PIC16F872-I/SO - 8-Bit 20MHz Flash MCU | Microchip Technology

MPN: PIC16F872-I/SO ✓ چالاک
4 V to 5.5 V Vdss 28-pin SOIC Package 20 MHz Speed 3.5 KB Flash (2K × 14 words) Memory
MOQ: 1 |

PIC16F872-I/SO گشتی

The Microchip Technology PIC16F872-I/SO is an 8-bit CMOS flash microcontroller with a 20 MHz maximum clock, 3.5 KB of program Flash organized as 2K × 14 words, and 64 bytes of EEPROM data memory, housed in a 28-pin SOIC package. It combines a high-performance RISC CPU, 16 I/O pins, five 10-bit analog-to-digital converter channels, self-programming, and an ICD interface.

A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into one device. The PIC16F872 belongs to the PIC16 family of 8-bit RISC microcontrollers, combining the PIC architecture with flash memory, digital I/O, timers, and serial communication. This hierarchy places it among general-purpose embedded-control devices used to sense inputs, execute control logic, and drive outputs in compact electronic systems.

The device uses 35 single-word instructions, with all instructions executing in one cycle except program branches, which require two cycles. Its 200 ns instruction-execution capability supports deterministic control at a 20 MHz operating speed. Five 10-bit ADC channels provide quantized analog measurements, while self-programming allows firmware updates without removing the microcontroller from its target circuit.

Peripheral integration is a central advantage. Two additional timers support periodic timing, and the capture, compare, and PWM functions support event measurement or proportional output generation. The synchronous serial port can operate as either a three-wire SPI interface or a two-wire I²C bus, allowing the same controller to communicate with displays, sensors, memories, and other microcontrollers using selectable serial protocols.

Typical applications include industrial control panels, compact sensor modules, environmental monitoring, appliance controllers, programmable timers, and small motor-control or LED-driving systems. The 16 available I/O lines allow the device to supervise switches, read analog sensors, communicate with a host, and operate outputs in applications where a larger MCU would add unnecessary cost or complexity.

When laying out a circuit, place the oscillator, decoupling capacitor, programming interface, and reset components according to the manufacturer data sheet. Because the device has a 28-pin SOIC footprint, verify that a replacement uses the same 28-pin pinout, voltage range, memory organization, and peripheral assignments. The -I/SO ordering code identifies the industrial-temperature and SOIC package option, while programming and configuration settings must be reviewed before production use.

This product overview combines the manufacturer core-feature information with package, memory, interface, and purchasing guidance. It also provides application-focused design notes, lifecycle information, comparison criteria, and verified source links to help engineers evaluate the PIC16F872-I/SO before integrating it into an embedded-control design.

جێگرەوەکانی جێگۆڕکێ بۆ PIC16F872-I/SO — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC16F872-I/SO (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Supply Voltage Range, Core Architecture, Program Memory Size, Timers.

Microchip Technology
Package: 18-SOIC (7.50 mm / 0.295 in width)
Core Architecture: PIC Mid-Range 8-bit
Timers: 3 (Timer0, Timer1, Timer2)
Microchip Technology
Package: 28-pin SOIC (SO)
Supply Voltage Range: 2.5 V to 5.5 V
Program Memory Size: 3.5 KB (2K x 14)
Microchip Technology
Timers: 2 additional timers
Microchip Technology
Program Memory Size: 3.5 KB (2K x 14 words) Flash
Microchip Technology
Package: 28-SOIC (Wide, 0.300 inch)
Supply Voltage Range: 4.0 V to 5.5 V
Core Architecture: RISC (Harvard)
Microchip Technology
Package: 28-SOIC (7.50 mm body width)
Supply Voltage Range: 2.0 V to 5.5 V
Core Architecture: PIC 8-bit RISC (Harvard)
Microchip Technology
Package: 28-SOIC (SO) wide-body, 7.50 mm (0.295 in)
Supply Voltage Range: 2.0 V to 5.5 V
Core Architecture: PIC16 mid-range 8-bit RISC (14-bit instruction word)

PIC16F872T-E/SO

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 28-pin SOIC
Same PIC16F872 family and 28-pin SOIC footprint; ordering-temperature designation differs, with temperature-range limits requiring confirmation against the exact data sheet

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

PIC16F716-I/SO

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 28-pin SOIC
PIC16F · PIC Mid-Range 8-bit · 14-bit · 35 single-word instructions · 20 MHz · 5 MIPS · 3.5 KB (2K x 14) Flash · 128 bytes

پەیوەندی بۆ نرخ

بینینی داتاشیت →

PIC16F872-I/SO زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Microcontroller Type 8-bit RISC flash microcontroller
زۆرترین فرێکوێنسیی کاتژمێر 20 MHz
Program Memory 3.5 KB Flash (2K × 14 words)
EEPROM Data Memory 64 bytes
Instruction Set 35 single-word instructions
Instruction Execution Time 200 ns
General-Purpose I/O Pins 16 pins
ADC Resolution 10 bits
ADC Channels 5 channels
Additional Timers 2 timers
Synchronous Serial Port 3-wire SPI or 2-wire I²C
Programming Support Self-programming and ICD
Supply Voltage Range 4 V to 5.5 V
پاکێج 28-pin SOIC
Process Technology CMOS
Capture, Compare, and PWM Supported

ڕێنمایی ڕێکخستنی پینی PIC16F872-I/SO 28-pin soic

ڕێکخستنی پین بۆ PIC16F872-I/SO (پاکێجی 28-pin soic). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 28-pin soic بۆ PIC16F872-I/SO

هیچ داتای وردی پینئاوت بەردەست نییە بۆ PIC16F872-I/SO.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

PIC16F872-I/SO گونجاوە بۆ 6 بەکارھێنانs: Industrial Control Panels, Environmental Sensor Modules, Appliance and HVAC Controllers, Programmable Timers and Sequencers, LED Lighting Controllers, Compact Communication Controllers.

🏭

Industrial Control Panels

The PIC16F872-I/SO fits compact control panels that must combine digital inputs, analog monitoring, and serial communication. Its 16 I/O pins can operate switches, indicators, relays, and interlocks, while the five-channel 10-bit ADC supports panel sensing functions. The 20 MHz clock and 200 ns instruction execution provide responsive control-loop handling, and the 3.5 KB flash program memory allows organized state-machine logic. Use the 28-pin SOIC footprint and confirm the 4 V to 5.5 V supply requirement when laying out the control board.

🧩

Environmental Sensor Modules

The PIC16F872-I/SO is appropriate for environmental monitoring modules that combine analog sensing with local configuration and data transfer. Its five 10-bit ADC channels can read resistive or buffered sensor signals, while 16 I/O lines support additional digital sensors, indicators, and communication functions. The microcontroller's 64 bytes of EEPROM can retain calibration or configuration information, and its serial port can select SPI or I²C to connect compatible sensors. Keep analog inputs away from switching nodes and follow the data-sheet grounding and decoupling guidance.

⚡

Appliance and HVAC Controllers

The PIC16F872-I/SO can manage appliance or HVAC functions where a compact controller must coordinate user inputs, temperature-like analog measurements, timing, and actuator outputs. Two additional timers and the capture, compare, and PWM functions support motor, valve, fan, or heating-cycle control, while five 10-bit ADC channels provide a practical analog measurement budget. Its 16 I/O pins leave room for switches and status indicators. Validate actuator drive circuitry and thermal margins independently from the controller package.

🔧

Programmable Timers and Sequencers

The PIC16F872-I/SO works well in programmable timers, test sequencers, and repetitive equipment-control modules where accurate event sequencing matters. The 20 MHz clock and 200 ns instruction execution enable fast deterministic logic, while two additional timers provide independent timing resources. The capture, compare, and PWM functions can measure events or generate proportional outputs, and 16 I/O lines support status lamps, start controls, and interlock inputs. Use the manufacturer timing diagrams to select timer, prescaler, and interrupt settings.

💡

LED Lighting Controllers

The PIC16F872-I/SO can serve as the control element for small LED lighting systems because its PWM and timer resources support adjustable duty cycle, while 16 I/O pins provide control and status channels. The five-channel 10-bit ADC may monitor a light-level or supply signal, and the SPI or I²C port can connect a display or configuration device. Because LED drivers and switching currents create EMI and supply transients, keep the MCU and decoupling layout separated from high-current paths and use suitable transistor drive stages.

🌐

Compact Communication Controllers

The PIC16F872-I/SO is suitable for compact protocol interfaces and embedded communication nodes that need both control logic and serial connectivity. Its synchronous serial port can be configured for three-wire SPI or two-wire I²C, allowing connection to sensors, displays, memories, or another controller. Sixteen I/O lines support handshake signals and auxiliary functions, while self-programming and ICD support simplify development and field updates. Verify bus levels, pull-up requirements, addresses, and timing directly from the relevant peripheral documentation.

What are the key specifications of PIC16F872-I/SO that engineers should know?
The PIC16F872-I/SO is an 8-bit CMOS flash microcontroller rated for a 20 MHz maximum clock, with 3.5 KB of flash program memory organized as 2K × 14 words, 64 bytes of EEPROM, and 16 I/O pins. According to the Microchip Technology product page, it also provides five 10-bit ADC channels, two additional timers, capture/compare/PWM functions, self-programming, and an ICD. These resources make it suitable for compact control, measurement, and serial-communication designs.
What is the operating voltage of PIC16F872-I/SO?
The PIC16F872-I/SO operates from 4 V to 5.5 V according to the PIC16F872 device information. Its 5.5 V maximum supply aligns with conventional 5 V logic systems. Decoupling, programming-voltage compatibility, and every attached peripheral should be checked against this range before the device is powered, particularly when the controller interfaces with sensors or communication transceivers using other voltage domains.
Where can I download the PIC16F872-I/SO datasheet PDF?
The official Microchip Technology PIC16F872 data sheet is available directly from the manufacturer at https://ww1.microchip.com/downloads/en/DeviceDoc/30221c.pdf. Use that document for the complete 28-pin pin-description table, electrical characteristics, timing information, programming instructions, and application guidance. The manufacturer product page at https://www.microchip.com/en-us/product/PIC16F872 is the appropriate starting point for confirming device status and related documentation.
Where can I find the PIC16F872-I/SO pinout?
The PIC16F872-I/SO pinout is defined in the 28-pin pin-description table in the Microchip Technology PIC16F872 data sheet. The target is a 28-pin SOIC device with 16 I/O pins, oscillator and programming connections, power pins, and multiplexed peripheral functions. Before assigning PCB nets, cross-check pin numbers against the manufacturer table rather than relying on a generic 28-pin drawing, because port functions and alternate peripheral assignments are device-specific.
What can replace the PIC16F872-I/SO on an existing PCB?
A true drop-in replacement for the PIC16F872-I/SO must use the same 28-pin SOIC footprint, preserve the 4 V to 5.5 V supply range, and match the program-memory organization, I/O assignments, oscillator connections, programming interface, and peripheral functions. Cross-reference candidates exist for related Microchip PIC devices, but a comparison page alone does not establish pin-to-pin compatibility. Verify the complete pin-description and programming tables before approving any substitute.
Is PIC16F872-I/SO suitable for analog sensor measurement?
Yes, the PIC16F872-I/SO is suitable for basic analog measurement because it contains five 10-bit ADC channels. The manufacturer product page identifies the 5-channel, 10-bit converter as part of the core feature set. It can support potentiometers, resistive sensors, and other analog inputs within the device's stated electrical limits. Sensor excitation, filtering, grounding, and source impedance should be designed separately because the ADC channel count alone does not determine measurement accuracy.
How is PIC16F872-I/SO programmed?
The PIC16F872-I/SO supports in-circuit self-programming and an ICD connection, as identified in the Microchip Technology product feature summary. The manufacturer data sheet contains the programming architecture, configuration information, electrical requirements, and programming sequences. Use the prescribed clock, programming pins, and voltage levels during development, and include a recovery strategy in the production design so programming remains accessible after the board is assembled.
PIC16F872-I/SO vs PIC16F716-I/SO: which is better for an embedded-control design?
PIC16F716-I/SO should be selected only after a complete pin and memory comparison confirms compatibility with the existing design. The target PIC16F872-I/SO has 3.5 KB of flash organized as 2K × 14 words, 16 I/O pins, five 10-bit ADC channels, and selectable SPI or I²C operation. A candidate based on the same 28-pin SOIC package may still differ in memory size, timer count, peripheral mapping, oscillator arrangement, or programming configuration, so package equality alone is not sufficient.
When should I choose PIC16F872-I/SO over a larger 8-bit microcontroller?
Choose the PIC16F872-I/SO when the design fits within 2K program words and the required I/O, timing, and communication resources. It combines five 10-bit ADC channels, 16 I/O pins, two additional timers, PWM-related functions, and selectable SPI or I²C in a 28-pin SOIC package. Move to a larger controller when firmware growth, additional interrupt servicing, more ADC inputs, greater memory isolation, or peripheral expansion will reduce development risk.
Where can I buy PIC16F872-I/SO and check current availability?
Use the Request a Quote form on this page to request the current price, stock position, minimum order quantity, and lead time for the PIC16F872-I/SO. The manufacturer lists the device as active, while live channel inventory and lead time can change independently of lifecycle status. Quote requests provide the appropriate path for current commercial confirmation without embedding a transient price or stock claim in the technical description.
Is PIC16F872-I/SO in stock?
Current stock for PIC16F872-I/SO should be confirmed through the Request a Quote form on this page. The device is listed as active by the manufacturer, but lifecycle status does not guarantee inventory in a particular quantity or package suffix. When requesting a quote, state the required quantity, date code preference, authorized-channel requirement, and target delivery location so the manufacturing and fulfillment answer reflects the actual order.
What is the lead time for PIC16F872-I/SO?
The current lead time for PIC16F872-I/SO should be obtained through the Request a Quote form on this page. Lead time can vary with order quantity, packaging configuration, date-code allocation, and manufacturing conditions. Submit the quantity and required delivery date with the request rather than relying on a generic stock estimate. The product remains active according to the manufacturer product listing, which supports sourcing planning but does not establish a fixed delivery interval.
What is the best Microchip equivalent for PIC16F872-I/SO?
The closest Microchip equivalent is the one whose 28-pin SOIC data sheet explicitly matches the target's pin assignments and application requirements. PIC16F716-I/SO is a documented comparison candidate, while PIC16F872T-E/SO is a related ordering configuration of the same device family. Neither should be treated as an automatic substitute until program memory, EEPROM, ADC channels, timers, oscillator pins, serial interfaces, and programming behavior have been compared line by line.
Does PIC16F872-I/SO support SPI and I²C communication?
Yes, the PIC16F872-I/SO synchronous serial port can be configured for either three-wire SPI or two-wire I²C operation, according to the Microchip Technology product page. This dual-mode capability is useful when a design must communicate with different peripheral families without changing the controller package. Firmware configuration, peripheral addressing, pin multiplexing, and maximum bus rates should still be checked in the manufacturer data sheet for the complete design constraints.
Is PIC16F872-I/SO compliant with RoHS, REACH, or AEC-Q100?
The PIC16F872-I/SO lifecycle is active, but the manufacturer material identified for this product does not state RoHS, REACH, or AEC-Q100 status. Its documentation may include separate environmental or material declarations for the exact ordering code. Request the current manufacturer declaration or compliance statement for the supplied lot and package before using the device in a regulated production program. Do not infer automotive qualification from the industrial-temperature ordering code.

داتای سەرچاوەی ئەندازیاری بۆ PIC16F872-I/SO — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the PIC16F872-I/SO for a compact embedded design that needs an 8-bit PIC controller with 3.5 KB of flash, 64 bytes of EEPROM, 16 I/O pins, five 10-bit ADC channels, timers, PWM-related functions, and selectable SPI or I²C communication. PIC16F872T-E/SO is the most direct family-level option when its ordering and temperature details satisfy the production requirement, because it retains the core resource set and 28-pin SOIC footprint. Consider PIC16F716-I/SO only after verifying its memory capacity, peripheral count, and complete pin mapping against the installed firmware. Neither a related PIC part nor another manufacturer's MCU should be treated as a drop-in substitute without demonstrating compatibility in the manufacturer pin tables. If the application needs more memory, more ADC channels, additional communications peripherals, or a wider operating-temperature range, select a larger MCU rather than forcing firmware into the 2K-word program-memory limit.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە PIC16F872T-E/SO PIC16F716-I/SO
Brand Microchip Technology Microchip Technology Microchip Technology
Package 28-pin SOIC 28-pin SOIC 28-pin SOIC
Processor Architecture 8-bit PIC RISC 8-bit PIC RISC 8-bit PIC RISC

جیاکەرەوە سەرەکییەکان

  • Integrated five-channel ADC (بەراورد بەPIC16F716-I/SO)
  • Configurable synchronous serial interface (بەراورد بەPIC16F716-I/SO)
  • Direct family-level ordering alternative (بەراورد بەPIC16F716-I/SO)

تێبینییەکانی دیزاین

Route the 28-pin SOIC footprint strictly from the manufacturer pin-description table and preserve access to MCLR, programming connections, OSC1, and OSC2. Place the decoupling capacitor at the device power pins with a short return path to ground. Because the MCU controls analog, digital, timer, and serial functions, partition the layout so switching-node current does not flow through the analog input reference area.

Treat the 20 MHz clock as a signal-integrity-sensitive net. Keep the oscillator components close to OSC1 and OSC2, use short ground returns, and avoid routing the oscillator clock beneath noisy switching outputs. For I²C, select pull-ups from the actual bus capacitance and operating voltage; for SPI, account for slave clock mode, signal levels, and the maximum documented bus rate in the data sheet.

Do not approve a substitute from package dimensions alone. Confirm that the 28-pin SOIC candidate retains the target's 4 V to 5.5 V operating range, program-memory organization, EEPROM capacity, oscillator connections, programming interface, ADC inputs, timer resources, and serial-port pin assignments. Also check configuration-word defaults because a compatible physical pinout can still require firmware and configuration changes.

The PIC16F872-I/SO operates from 4 V to 5.5 V, so the supply must remain within that range during normal operation, reset, and programming. Use local decoupling and avoid sharing high-current return paths with ADC inputs. If an external sensor or actuator uses a different voltage domain, add appropriate level translation rather than allowing an overvoltage to reach the controller's I/O pins.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The manufacturer product page and data sheet identify the device as active but do not provide the specific environmental-compliance declarations requested. Obtain the current manufacturer declarations for the exact ordering code and production lot.

داتا پشتڕاستکراوەتەوە لە: 2026-11-04 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

pic16f872 i so datasheet pic16f872 datasheet pic16f872 pinout pic16f872 i sp datasheet pic16f872 programming pic16f872 datasheet pdf PIC16F872-I/SO equivalent PIC16F872-I/SO replacement PIC16F872-I/SO 28-pin SOIC footprint PIC16F872-I/SO price PIC16F872-I/SO stock Microchip PIC16F872-I/SO PIC16F872-I/SO SPI I2C PIC16F872-I/SO ADC application

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology PIC16F872 PIC16F872-I/SO PIC16F872T-E/SO PIC16F716-I/SO PIC16 microcontroller family 8-bit RISC microcontroller CMOS flash microcontroller flash program memory EEPROM data memory 10-bit analog-to-digital converter ADC SPI I2C PWM capture compare PWM self-programming ICD 20 MHz clock 28-pin SOIC surface-mount package industrial control sensor module embedded control system
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ