PIC16F872-I/SS - 20MHz 8-Bit Flash MCU | Microchip
MPN: PIC16F872-I/SS ✓ چالاکPIC16F872-I/SS گشتی
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The PIC16F872 belongs to the PIC16 family of 8-bit flash microcontrollers, placing it below more general-purpose 32-bit processors in computational capacity while offering dedicated resources for embedded control, sensor reading, timing, and serial communications. The -I/SS ordering identifies the industrial-temperature grade in an SSOP package.
The device includes five 10-bit analog-to-digital converter channels, two additional timers, capture/compare/PWM functions, and a synchronous serial port configurable for three-wire SPI or two-wire I²C operation. Its 64-byte EEPROM provides nonvolatile storage for configuration and calibration values, while self-programming allows firmware to update retained program data under controlled conditions.
The PIC architecture supports compact instruction encoding, and the listed 200 ns execution capability enables deterministic control of time-sensitive embedded tasks. Two additional timers support periodic scheduling, input capture, output compare, and pulse-width modulation. The five-channel ADC is suitable for monitoring multiple analog inputs, while selectable SPI or I²C operation allows the same controller to connect to different peripheral types.
Typical uses include industrial control panels, temperature monitoring, small motor and actuator controllers, sensor interfaces, and compact embedded products. The combination of EEPROM, ADC channels, timers, and serial buses is particularly useful when a board needs local sensing and communication without relying on a separate programmable logic device or external data converter.
For PCB design, follow the pin-assignment table and recommended decoupling arrangement in the Microchip data sheet. Preserve the required oscillator configuration, programming access, supply voltage limits, and unused-pin treatment in the production schematic. Firmware should also include startup and brownout handling appropriate to the final power-supply topology.
This page organizes the PIC16F872-I/SS specifications, compatible family options, application guidance, and engineering considerations into a practical selection reference. The comparison focuses on package, memory, peripherals, and programming requirements so engineers can evaluate an upgrade path before changing a PCB or firmware design.
جێگرەوەکانی جێگۆڕکێ بۆ PIC16F872-I/SS — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC16F872-I/SS (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Timers, ADC, Operating Temperature, Core Architecture.
PIC16F872-E/SS
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16F873-I/SS
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC16F873A-I/SS
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16F876-I/SS
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC16F876A-I/SS
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16F872-I/SS زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Microcontroller Type | 8-bit CMOS Flash Microcontroller |
| CPU Architecture | PIC RISC-based architecture with 35 single-word instructions |
| زۆرترین فرێکوێنسیی کاتژمێر | 20 MHz |
| Instruction Execution Time | 200 ns |
| Program Memory | 3.5 KB Flash (2K x 14 words) |
| EEPROM Data Memory | 64 bytes |
| Self-Programming | Supported |
| In-Circuit Debug | ICD supported |
| ADC Resolution | 10 bits |
| ADC Channels | 5 channels |
| Additional Timers | 2 timers |
| Timer Functions | Capture, compare, and PWM |
| Synchronous Serial Port | Configurable as 3-wire SPI or 2-wire I²C |
| پاکێج | 28-pin SSOP |
| ژمارەی پین | 28 pins |
| جۆری دامەزراندن | Surface mount |
| Temperature Grade | Industrial grade |
ڕێنمایی ڕێکخستنی پینی PIC16F872-I/SS 28-pin ssop
ڕێکخستنی پین بۆ PIC16F872-I/SS (پاکێجی 28-pin ssop). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ PIC16F872-I/SS.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
PIC16F872-I/SS گونجاوە بۆ 6 بەکارھێنانs: Industrial Control Panel, Temperature and Environmental Monitoring, Small Motor and Actuator Control, Smart Sensor Interface, Programmable Logic Controller, Embedded Data Acquisition Node.
Industrial Control Panel
PIC16F872-I/SS fits compact industrial control panels that combine status inputs, operator commands, timing functions, and local data retention. Its 20 MHz clock and 200 ns listed instruction execution provide responsive handling of debouncing, event sequencing, and display updates. Five 10-bit ADC channels can monitor panel analog conditions, while 64 bytes of EEPROM retains configuration or calibration values. The 28-pin SSOP package supports compact layouts, and SPI or I²C can connect a display, keypad, or remote sensor module.
پێشنیارکراو
Temperature and Environmental Monitoring
PIC16F872-I/SS is appropriate for a distributed temperature-monitoring node when the monitored analog signal can be resolved by a 10-bit ADC channel. Five ADC inputs leave room for reference or condition signals, while two additional timers support sampling intervals and timeout handling. The 64-byte EEPROM can retain calibration constants or a device identifier, and self-programming supports controlled configuration-data maintenance. Serial communication through SPI or I²C allows the controller to report readings to a local sensor hub or supervisory controller.
پێشنیارکراو
Small Motor and Actuator Control
PIC16F872-I/SS can act as the sequencing controller for small motors, valves, relays, or solenoid loads. Its capture, compare, and PWM functions help generate precise timing signals, while two additional timers support independent periodic tasks. The 20 MHz processing capability allows the firmware to combine input monitoring with controlled actuator commands. Because an MCU cannot safely drive inductive loads directly, use suitable driver circuitry and keep switching-node current and ground paths separated from sensitive analog inputs.
پێشنیارکراو
Smart Sensor Interface
PIC16F872-I/SS works well as a compact interface controller between analog sensors and a digital communications bus. Five 10-bit ADC channels can accept sensor outputs directly when their voltage range and bandwidth suit the application, while the timer resources support periodic sampling and sensor timing. The synchronous serial port can be configured as SPI for faster device transfers or I²C for a bus-oriented sensor network. EEPROM preserves identifiers and simple calibration coefficients without requiring a separate nonvolatile-memory component.
پێشنیارکراو
Programmable Logic Controller
PIC16F872-I/SS is suitable for a small PLC-like control module where deterministic logic, timers, EEPROM configuration, and serial communications are required in a compact package. The 35-instruction architecture keeps firmware efficient for relay sequencing, pulse generation, and input handling. Two additional timers expand timing flexibility beyond the basic timer resources, while five ADC channels enable analog supervisory inputs. The 28-pin SSOP footprint allows reuse of an existing PIC16-family layout after a complete peripheral and pin-function review.
پێشنیارکراو
Embedded Data Acquisition Node
PIC16F872-I/SS can serve as a compact acquisition node when samples must be filtered, timestamped, and forwarded over a serial link. The 20 MHz clock supports efficient fixed-point processing, while the five 10-bit ADC channels permit multiple analog inputs. Timers can establish uniform sampling intervals and communication slots, and 64 bytes of EEPROM is useful for calibration or a short configuration record. The same controller can use SPI for a higher-speed local device or I²C for a distributed sensor bus.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ PIC16F872-I/SS — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | PIC16F872-E/SS | PIC16F873-I/SS | PIC16F873A-I/SS | PIC16F876-I/SS | PIC16F876A-I/SS |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-pin SSOP | 28-pin SSOP - same footprint | 28-pin SSOP - same footprint | 28-pin SSOP - same footprint | 28-pin SSOP - same footprint | 28-pin SSOP - same footprint |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Program Memory | 3.5 KB Flash (2K x 14 words) | 3.5 KB Flash | 4.0 KB Flash | 4.0 KB Flash | 14.0 KB Flash | 14.0 KB Flash |
| EEPROM Data Memory | 64 bytes | 64 bytes | 64 bytes | 128 bytes | 128 bytes | 128 bytes |
| ADC Configuration | 5 channels, 10-bit | 5 channels, 10-bit | 5 channels, 10-bit | 5 channels, 10-bit | 5 channels, 10-bit | 5 channels, 10-bit |
| Serial Interfaces | SPI or I²C synchronous serial port | SPI or I²C | SPI or I²C | SPI or I²C | SPI or I²C | SPI or I²C |
| Temperature Grade | Industrial grade | Extended grade | Industrial grade | Industrial grade | Industrial grade | Industrial grade |
| Debug and Programming | ICD and self-programming supported | ICD and self-programming supported | ICD and self-programming supported | ICD and self-programming supported | ICD and self-programming supported | ICD and self-programming supported |
| Special Features | 2 additional timers with capture, compare, and PWM | 2 additional timers with capture, compare, and PWM | Enhanced family peripherals | Enhanced comparators and family peripherals | Expanded timers, serial resources, and interrupts | Expanded timers, serial resources, and interrupts |
جیاکەرەوە سەرەکییەکان
- Smallest memory footprint within the considered PIC16 family options (بەراورد بەPIC16F876-I/SS)
- Temperature-grade alternative with identical core memory configuration (بەراورد بەPIC16F872-E/SS)
- Modest memory expansion without changing the 28-pin SSOP format (بەراورد بەPIC16F873-I/SS)
تێبینییەکانی دیزاین
Place the MCU supply decoupling capacitors at the device power pins and keep their ground returns short and direct. Route oscillator traces away from switching nodes, relay drivers, and high-current actuator paths. The five ADC inputs should have controlled source impedances and short analog traces, with digital return currents kept outside sensitive input paths. Preserve the exact package pad geometry and pin numbering shown in the manufacturer data sheet when releasing the PCB footprint.
Design the supply for the PIC16F872's worst-case clock, peripheral, and I/O conditions rather than its idle state. Include the required startup and brownout behavior in firmware so the controller does not write EEPROM or control external hardware before its supply and clock are valid. Validate the regulator's startup, minimum load, ripple, and temperature behavior with the final peripheral load because the MCU and attached sensors can create varying demand patterns.
Do not assume that a package-compatible PIC16 replacement is firmware-compatible. Before selecting PIC16F873-I/SS, PIC16F873A-I/SS, PIC16F876-I/SS, or PIC16F876A-I/SS, compare interrupt vectors, timer registers, ADC channels, EEPROM capacity, serial configuration, port functions, and configuration bits. Recheck every formerly unused pin because a neighboring family member can assign an alternate peripheral or bidirectional function to the same physical lead.
Separate analog inputs from the timing-critical oscillator and programming connections. If the board also drives relays, motors, or solenoids, route their high-current paths away from the MCU and use a defined return-current path for the digital ground. Keep the SPI or I²C bus away from high-slope switching nodes where possible, and follow the recommended pull-up arrangement and maximum bus capacitance specified for the connected devices.
زانیاری پابەندبوون
The target's environmental, material, and automotive qualification declarations are not established by the manufacturer page information shown on this page.