PIC16F883-I/SP - 8-Bit 20MHz Flash MCU | Microchip Technology
MPN: PIC16F883-I/SP ✓ چالاکPIC16F883-I/SP گشتی
A PIC microcontroller is an embedded processing semiconductor that integrates a CPU core, nonvolatile program memory, data memory, I/O ports, timers, analog functions, and communication peripherals into one device. PIC16F883 belongs to the 8-bit PIC16 family and sits between basic general-purpose controllers and larger pin-count PIC devices. Its flash-based architecture supports in-system reprogramming, while its EEPROM provides nonvolatile storage for configuration values, calibration data, counters, or serial numbers that must survive a power interruption.
The PIC16F883-I/SP provides 20MHz maximum operation, 7KB of flash program memory, 256 bytes of RAM, 256 bytes of EEPROM, and 25 I/O pins. Self-programming allows firmware to update stored code under defined operating conditions. Integrated in-circuit debugging support simplifies development and troubleshooting, and the two comparators support threshold detection, oscillator monitoring, and basic analog signal conditioning without requiring external comparator ICs.
The device is based on a compact 8-bit PIC architecture with only 35 single-word instructions. This relatively small instruction set can simplify firmware assembly and make instruction timing easier to analyze than with more complex processor cores. Its operating voltage options of 2.5V, 3.3V, and 5V provide flexibility across industrial-control, instrumentation, appliance-control, and embedded accessory designs, although the exact configuration and limits for each voltage must be checked in the manufacturer datasheet.
Typical uses include industrial control panels, motor and relay controllers, temperature-measurement equipment, simple data loggers, interface modules, and compact embedded products. The two comparators are particularly useful in threshold-based sensing systems, while the EEPROM can retain configuration parameters without external nonvolatile memory. The 28-pin SPDIP format also suits prototypes, educational platforms, and designs that require socketed assembly or leaded through-hole construction.
For new production layouts, confirm the exact pin assignment, decoupling requirements, programming method, and peripheral configuration in the PIC16F883 manufacturer documentation. Keep the programming interface and power rails accessible, and apply the manufacturer’s recommended crystal, reset, and decoupling arrangements when reproducing the reference configurations.
This page consolidates the verified device specifications, package information, sourcing context, drop-in alternatives, and practical design guidance into an engineering-oriented reference for the PIC16F883-I/SP.
جێگرەوەکانی جێگۆڕکێ بۆ PIC16F883-I/SP — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC16F883-I/SP (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Self-Programming, EEPROM, In-Circuit Debug, Program Memory (Flash).
PIC16F883-E/SP
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16F873-20/SP
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC16F882-I/SP
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16F884-I/SP
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC16F886-I/SP
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16F887-I/SP
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC16F883-I/SP زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Microcontroller Type | 8-bit CMOS flash-based PIC microcontroller |
| زۆرترین فرێکوێنسیی کاتژمێر | 20 MHz |
| Program Memory Size | 7 KB (4K x 14 words) |
| RAM Size | 256 bytes |
| EEPROM Size | 256 bytes |
| Number of I/O Pins | 25 |
| Comparator Count | 2 |
| Instruction Set Size | 35 single-word instructions |
| Program Memory Type | Flash |
| Self-Programming | Supported |
| In-Circuit Debug Support | ICD supported |
| Operating Voltage Options | 2.5V, 3.3V, or 5V |
| پاکێج | 28-pin SPDIP |
| Package Pin Count | 28 pins |
| Architecture | PIC 8-bit RISC |
| جۆری دامەزراندن | Through-hole |
ڕێنمایی ڕێکخستنی پینی PIC16F883-I/SP 28 pins
ڕێکخستنی پین بۆ PIC16F883-I/SP (پاکێجی 28 pins). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ PIC16F883-I/SP.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
PIC16F883-I/SP گونجاوە بۆ 6 بەکارھێنانs: Industrial Control Panels, Temperature and Threshold Monitoring, Motor and Relay Controllers, Simple Data Loggers, Appliance and Embedded Products, Education and Rapid Prototyping.
Industrial Control Panels
The PIC16F883-I/SP fits industrial control panels that coordinate relays, indicators, inputs, and modest analog monitoring tasks. Its 20MHz clock rate provides responsive execution for sequential control logic, while 25 I/O pins offer practical connection density for buttons, status LEDs, interlocks, and discrete sensors. The two integrated comparators can detect input thresholds without adding separate comparator packages, and the 256-byte EEPROM can retain configuration values or counters. Because the device is packaged as a 28-pin SPDIP, it is particularly convenient for leaded control boards, prototypes, and serviceable assemblies, provided the exact temperature and electrical limits are verified for the installation environment.
پێشنیارکراو
Temperature and Threshold Monitoring
PIC16F883-I/SP is appropriate for compact temperature or threshold-monitoring equipment where a microcontroller must sample conditions, evaluate limits, and control local outputs. The two comparators can monitor sensor-derived voltages, supply thresholds, or oscillator signals while the 20MHz CPU performs filtering, timing, display updates, and alarm logic. Its 256 bytes of EEPROM allow calibration coefficients, alarm setpoints, or device counters to remain available after power loss. The 28-pin through-hole package also simplifies prototype construction and socket-based servicing. For high-accuracy measurement, add an appropriate external sensor interface and follow the manufacturer’s recommended analog layout and decoupling guidance.
پێشنیارکراو
Motor and Relay Controllers
The PIC16F883-I/SP can serve as the sequencing controller for small motors, solenoid valves, relays, and contactors. Its 20MHz operating speed supports timing-intensive routines such as debouncing, interlocks, ramp profiles, and fault handling, while 25 I/O pins provide control and sensing channels. Flash memory permits application firmware to be updated through the supported programming architecture, and EEPROM can retain travel counts, cycle totals, or setup values. The device does not replace a motor driver or power-stage semiconductor, so designers must add suitable driver circuitry, protection, and isolation where required by the load voltage and current.
پێشنیارکراو
Simple Data Loggers
PIC16F883-I/SP can form the control core of a simple data logger that records operating events, timestamps, counters, or diagnostic states in EEPROM and communicates results through a serial interface. Its 7KB of flash provides room for acquisition routines, communication drivers, and data formatting, while the 20MHz clock supports timed sampling and efficient peripheral servicing. The 256-byte EEPROM is suitable for retaining a configuration record and recent status information. Capacity planning is essential because EEPROM writes have finite endurance; a production logger should minimize unnecessary writes, wear important records appropriately, and provide a mechanism for handling storage exhaustion.
پێشنیارکراو
Appliance and Embedded Products
PIC16F883-I/SP is suitable for appliance controllers and compact embedded products that combine user inputs, status indication, timing, and simple analog functions. Its 25 I/O pins can support keys, selectors, displays, alarm outputs, and sensor inputs, while the two comparators can assist with level detection. The industrial -I/SP ordering suffix addresses extended-temperature use when the product’s specified operating range requires it. A designer should keep the MCU away from high-temperature power stages, provide clean regulated supply and decoupling, and use the manufacturer’s oscillator and reset recommendations to maintain dependable startup and timing behavior.
پێشنیارکراو
Education and Rapid Prototyping
PIC16F883-I/SP works well as a learning and rapid-prototyping platform because it combines a compact instruction set, flash memory, EEPROM, in-circuit debugging, and a familiar 28-pin SPDIP footprint. The 35 single-word instruction architecture helps students follow program flow and timing, while the 25 I/O pins provide enough connections for LEDs, switches, displays, sensors, and small actuator experiments. Its 20MHz operating limit permits timing exercises and moderately responsive control projects. Builders should follow the manufacturer’s programming, reset, oscillator, and decoupling guidance, and avoid treating prototype wiring practices as suitable for noisy motors or high-current loads.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ PIC16F883-I/SP — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | PIC16F883-E/SP | PIC16F873-20/SP | PIC16F882-I/SP | PIC16F884-I/SP | PIC16F886-I/SP | PIC16F887-I/SP |
|---|---|---|---|---|---|---|---|
| Package | 28-pin SPDIP | 28-pin SPDIP | 28-pin SPDIP | 28-pin SPDIP | 28-pin SPDIP | 28-pin SPDIP | 28-pin SPDIP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Architecture | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC |
| Maximum Clock Frequency | 20MHz | 20MHz | 20MHz | 20MHz | 20MHz | 20MHz | 20MHz |
| Program Memory | 7KB (4K x 14 words) | 7KB (4K x 14 words) | 4KB | 4KB | 8KB | 8KB | 8KB |
| Temperature Suffix | Industrial -I | Extended -E | 20 MHz grade | Industrial -I | Industrial -I | Industrial -I | Industrial -I |
جیاکەرەوە سەرەکییەکان
- Higher program-memory capacity within the same 28-pin SPDIP footprint (بەراورد بەPIC16F882-I/SP)
- Balanced memory and I/O configuration for compact control products (بەراورد بەPIC16F873-20/SP)
- Exact PIC16F883 device identity with a lower-cost-style temperature suffix option (بەراورد بەPIC16F883-E/SP)
تێبینییەکانی دیزاین
Place the MCU power pins and decoupling capacitors according to the manufacturer’s recommended layout, with the supply and ground return paths kept short and continuous. The accessible product information confirms 28-pin SPDIP packaging but does not reproduce the complete numbered pin table, so use the official pin-description drawing before assigning tracks, programming signals, oscillator connections, or analog inputs.
Design the supply rail for the exact voltage option used by the product and keep transients away from the MCU supply pins. The family is identified with 2.5V, 3.3V, and 5V operating options, but the permissible peripheral configuration, reset behavior, and current limits vary by device mode. Confirm those limits in the manufacturer datasheet before selecting external components or configuring analog and communication peripherals.
Do not treat a shared package outline as proof that every alternative is firmware-compatible. PIC16F882, PIC16F883, PIC16F884, PIC16F886, and PIC16F887 devices can differ in program memory, I/O count, timers, comparators, and pin multiplexing. After changing the device, rebuild with the correct target configuration, review the pin table, and test every board-level peripheral; PIC16F873-20/SP also has less program memory than the target.
Keep oscillator, programming, and sensitive analog routes away from noisy switching nodes and high-current return paths. If the two comparators monitor low-level or fast-changing signals, route them away from digital clocks and provide a stable reference network. Through-hole construction simplifies prototyping, but production layouts should still minimize loop area, maintain solid ground connections, and segregate analog and switching-current paths.
زانیاری پابەندبوون
The accessible product and distributor information does not explicitly state the target part’s RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because the product is not identified as an automotive-qualified device.