PIC16F88T-I/SS - 20MHz 8-Bit Flash MCU | Microchip Technology
MPN: PIC16F88T-I/SS ✓ چالاکPIC16F88T-I/SS گشتی
A microcontroller is a programmable semiconductor that integrates a processor core, memory, I/O ports, timers, and communication peripherals on one device. The PIC16F88 belongs to the PIC16 family of 8-bit RISC-style microcontrollers, placing it within the broader hierarchy of embedded controllers, microcontrollers, and semiconductors. Its flash architecture permits firmware to be programmed and updated without removable memory, while its compact package supports space-constrained control boards and instrument panels.
Key operating characteristics include a maximum clock speed of 20 MHz, 7 KB of flash memory, 4K x 14-word program organization, and 368 bytes of RAM according to the manufacturer product information. The PIC16F88T-I/SS uses a 4.5 V to 5.5 V supply range for the cited configuration. Its instruction-oriented RISC architecture supports fast execution and predictable control-loop operation, while the integrated flash memory simplifies production programming and field firmware maintenance.
The PIC16F88 family combines general-purpose digital I/O with embedded control resources suited to sensing, timing, state-machine, and communication-interface tasks. Because the core operates from an internal 8 MHz oscillator and can also use an external clock source, designers can balance timing requirements, power behavior, and board complexity. Device programming is supported through the PIC16F88’s flash-memory architecture, subject to the programming and electrical requirements defined by Microchip.
Typical uses include industrial control panels, building-automation interfaces, compact sensor nodes, appliance controllers, programmable logic devices, and instrumentation modules. In these systems, the 20 MHz processing capability supports responsive control logic, the flash memory stores application firmware, and the 20-SSOP package reduces PCB footprint compared with larger leaded packages.
Designers should confirm the complete pin assignment, peripheral mix, oscillator options, and programming configuration against the manufacturer datasheet before layout release. A 100 nF decoupling capacitor should be placed close to each supply connection, the SSOP footprint should follow the manufacturer’s land pattern, and unused inputs should be terminated according to the device-specific recommendations.
This page combines the exact orderable MPN, manufacturer specifications, lifecycle information, application guidance, and verified same-package replacement options. It also distinguishes electrically compatible ordering variants from alternatives that require a different footprint, helping engineers make a board-level decision without confusing package compatibility with general functional similarity.
جێگرەوەکانی جێگۆڕکێ بۆ PIC16F88T-I/SS — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC16F88T-I/SS (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, ADC, I/O Pins, Internal Oscillator, Temperature Grade.
PIC16F88-I/SS
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16F88T-E/SS
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16F88T-I/SS زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 8-bit CMOS flash-based microcontroller |
| Maximum Clock Speed | 20 MHz |
| Program Memory | 7 KB flash (4K x 14 words) |
| RAM | 368 bytes |
| Internal Oscillator | 8 MHz |
| ڤۆڵتیەی دابینکردن | 4.5 V to 5.5 V |
| Architecture | PIC 8-bit RISC |
| Instruction Set | 35 single-word instructions |
| Instruction Execution | 200 ns |
| پاکێج | 20-lead SSOP, 8 mm x 8 mm |
| جۆری دامەزراندن | Surface mount |
| Lead-Free Construction | Lead-free plastic |
| Temperature Grade | Industrial |
| EEPROM Data Memory | 256 bytes |
ڕێنمایی ڕێکخستنی پینی PIC16F88T-I/SS 20-lead ssop, 8 mm x 8 mm
ڕێکخستنی پین بۆ PIC16F88T-I/SS (پاکێجی 20-lead ssop, 8 mm x 8 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ PIC16F88T-I/SS.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
PIC16F88T-I/SS گونجاوە بۆ 6 بەکارھێنانs: Industrial Control Panel, Building Automation Sensor Node, Appliance Control Module, Programmable Logic Controller, Compact Instrumentation Interface, LED Status and Sequencer.
Industrial Control Panel
The PIC16F88T-I/SS fits compact control panels that coordinate discrete inputs, indicator outputs, timing functions, and low-speed serial peripherals. Its 20 MHz execution rate and 200 ns instruction timing provide ample responsiveness for deterministic state-machine control, while 7 KB of flash stores application logic and configuration data without a separate memory device. The 20-lead SSOP package also reduces the area required for the controller. A designer should partition the pins according to the manufacturer pin-description table, use the 4.5 V to 5.5 V supply range for the selected configuration, and place local supply decoupling directly beside the device. The 368-byte RAM is suitable for compact working sets but requires attention to interrupt context, buffer management, and stack depth.
پێشنیارکراو
Building Automation Sensor Node
The PIC16F88T-I/SS is appropriate for distributed building-automation nodes that gather digital sensor inputs and forward control or status information through a serial interface. Its low-cost flash architecture supports local protocol handling, periodic sampling, debounce logic, and configuration storage in a compact board. The internal 8 MHz oscillator can simplify designs that do not require an external clock, while the 20 MHz maximum provides additional timing headroom. Practical implementations should limit switching-node energy use through the firmware duty cycle and verify the active and sleep-mode behavior against the family data sheet. External interface transceivers should be selected for the required bus voltage, while pull-ups or termination must follow the chosen communication standard rather than an assumed fixed value.
پێشنیارکراو
Appliance Control Module
The PIC16F88T-I/SS can serve as the central controller in a compact appliance module that combines switch inputs, motor or valve outputs, timing logic, and diagnostic functions. Its 7 KB flash capacity accommodates control firmware, lookup tables, and nonvolatile settings, while 368 bytes of RAM supports short-lived state variables and communication buffers. The 20-lead SSOP package is useful where board area and component height are constrained. Designers should use the manufacturer’s output-driver guidance, account for inductive loads with suitable protection, and isolate switching-node transients from sensitive control traces. The controller should also include a defined recovery path for brownout, watchdog, and firmware-fault conditions before it is released into production equipment.
پێشنیارکراو
Programmable Logic Controller
The PIC16F88T-I/SS is well suited to small programmable-logic and sequencer products because its 8-bit RISC core, flash memory, timers, and I/O resources combine in one package. It can implement relay sequencing, pulse generation, interlocks, counters, and machine-state logic without a separate processor or program-memory IC. The 20 MHz clock capability supports faster event handling than many low-end logic devices, while the 368-byte RAM constrains complex buffering or large intermediate tables. Design work should establish worst-case interrupt latency and execution time for each safety-related state, then place test points and programming access where they do not interfere with user wiring. A hardware watchdog, reset strategy, and validated output states are important for production control designs.
پێشنیارکراو
Compact Instrumentation Interface
The PIC16F88T-I/SS can coordinate calibration, status, and command handling in compact instrumentation that bridges a sensor or measurement front end to a host interface. Its 368-byte RAM can hold short command sequences and sampled values, while 7 KB of flash supports the protocol stack and device-specific logic. The internal 8 MHz oscillator offers a straightforward timing reference, and the 20-lead SSOP footprint supports dense front panels. Signal integrity begins at the MCU boundary: keep analog inputs away from switching traces, use a defined common ground strategy, and route serial communications away from high-current outputs. The programmer must ensure that startup and watchdog behavior cannot leave an instrument in an unsafe output state.
پێشنیارکراو
LED Status and Sequencer
The PIC16F88T-I/SS can implement LED sequencing, status indication, and timed visual feedback in control equipment without a dedicated display controller. Its flash memory supports multiple animation patterns and device-specific status tables, and the 20 MHz processing rate allows responsive updates even when other control functions are active. The 20-lead SSOP package leaves additional board area for LEDs and their current-limiting networks. Firmware should use timer-based scheduling rather than blocking delays to keep the system responsive, and unused I/O pins should be configured appropriately rather than left floating. Deciding whether to drive LEDs directly or through a driver depends on total current, polarity, and whether the indicator must remain active during reset or fault conditions.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ PIC16F88T-I/SS — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | PIC16F88-I/SS | PIC16F88T-E/SS |
|---|---|---|---|
| Package | 20-lead SSOP, 8 mm x 8 mm | 20-lead SSOP - same package | 20-lead SSOP - same package |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Architecture | PIC 8-bit RISC | PIC 8-bit RISC | PIC 8-bit RISC |
| Maximum Clock Speed | 20 MHz | 20 MHz | 20 MHz |
| Program Memory | 7 KB flash (4K x 14 words) | 7 KB flash (4K x 14 words) | 7 KB flash (4K x 14 words) |
| RAM | 368 bytes | 368 bytes | 368 bytes |
| Internal Oscillator | 8 MHz | 8 MHz | 8 MHz |
| Supply Voltage | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Temperature Grade | Industrial | Industrial | Extended |
| Ordering Format | T suffix, tape-and-reel ordering code | Non-T ordering code | T suffix with E temperature-grade code |
جیاکەرەوە سەرەکییەکان
- Production-oriented tape-and-reel ordering code (بەراورد بەPIC16F88-I/SS)
- Exact SSOP footprint preservation (بەراورد بەPIC16F88T-E/SO)
- 20 MHz performance with compact 8-bit core (بەراورد بەPIC16F88-I/SS)
تێبینییەکانی دیزاین
Route the SSOP footprint from the manufacturer land pattern and reserve the programming interface before placing surrounding components. Keep the 20 MHz clock and serial I/O away from switching or inductive drive stages, and provide a short ground return for each decoupling capacitor. The 20-lead SSOP is compact, so pin-escape routes can become crowded when the MCU is surrounded by screw terminals or display connectors.
Place the required local supply capacitors close to the device power pins and minimize the loop formed by each capacitor and its connection to ground. Use the cited 4.5 V to 5.5 V operating range for the selected device configuration, and ensure that load transients do not pull the rail outside the limits defined in the manufacturer electrical characteristics. External loads should have their own return path rather than forcing transient current through the MCU ground network.
Do not substitute a different package suffix merely because it identifies another member of the PIC16F88 family. PIC16F88T-I/ML uses a 28-QFN package, while PIC16F88T-E/SO and other ordering forms use a different lead arrangement; these options are not physical drop-ins for a 20-lead SSOP board. Confirm the exact package code, pin count, exposed-pad requirements, and land pattern before releasing a substitution.
Keep programming, reset, oscillator, and debug-related routes accessible for production programming. Follow the manufacturer’s input configuration for unused pins and account for oscillator startup and stable operation in firmware timing. If the internal 8 MHz oscillator is selected, verify that its accuracy is sufficient for the application; otherwise, reserve a clean external-clock path rather than adding it after PCB fabrication.
زانیاری پابەندبوون
The product listing identifies the 20-lead SSOP as lead-free plastic construction. Specific RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals declarations were not identified in the available product information.