PIC16F917-E/PT - 20MHz 8-Bit Flash MCU | Microchip
MPN: PIC16F917-E/PT ✓ چالاکPIC16F917-E/PT گشتی
A PIC16 microcontroller is an embedded-processing semiconductor that combines a CPU, program memory, data memory, I/O ports, timers, and communication peripherals on one integrated circuit. Within the product hierarchy, PIC16F917 belongs to the PIC16 8-bit MCU family, flash-memory microcontroller class, and embedded-control semiconductor category. Its compact integration lets equipment designers replace discrete logic, timers, and interface circuits with one programmable device.
Key device attributes include 20 MHz maximum operating speed, 14 KB (8K x 14) flash program memory, 352 x 8 RAM, a 10-bit ADC, and an operating temperature range of -40°C to +125°C according to the LCSC product summary. Flash memory permits in-system reprogramming and reusable firmware during development. The 44-TQFP package also exposes a broad set of GPIO pins for sensors, actuators, indicators, communication lines, and control logic.
The PIC16F917 belongs to the PIC16F917/916/914/913 device family, whose members share a continuous 8K-word program-memory architecture and 11-bit branch addressing across 2K-word pages, as described in Microchip document 41250D. This architecture supports interrupt-driven state machines, data acquisition, communications, and supervisory functions without requiring an external memory bus.
Typical uses include industrial control panels, environmental monitoring instruments, motor and relay controllers, programmable logic applications, and compact serial-interface products. The 10-bit ADC supports sensor conditioning, while the GPIO count allows multiple digital inputs and outputs. These characteristics make the MCU suitable for designs where deterministic control, moderate processing demand, and programmable firmware are more important than high-speed data processing.
When laying out a PCB, preserve the datasheet-defined decoupling and programming interfaces, route sensitive analog inputs away from switching nodes, and validate the oscillator and reset network against the selected operating mode. Before production, confirm the complete pin assignment and exposed-pad requirements in Microchip's device documentation rather than inferring them from a distributor summary.
This product page consolidates verified MPN-specific specifications, lifecycle information, source documents, packaging details, and practical design guidance. It also separates confirmed electrical characteristics from parameters that require confirmation from the complete manufacturer datasheet, helping engineers plan a compliant embedded-control design.
جێگرەوەکانی جێگۆڕکێ بۆ PIC16F917-E/PT — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC16F917-E/PT (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, ADC, Core Architecture, I/O Pins, Internal Oscillator.
PIC16F917-I/PT
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16F917T-E/PT
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC16F917-E/PT زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 8-bit Flash-based Microcontroller |
| Maximum CPU Frequency | 20 MHz |
| Program Memory Size | 14 KB (8K x 14) |
| RAM Size | 352 x 8 bits |
| Number of I/O | 35 I/O (DigChip); 36 I/O (Mouser) |
| ADC Resolution | 10 bit |
| مەودای پلەی گەرمیی کارکردن | -40°C to +125°C |
| پاکێج | 44-TQFP (10 x 10 mm) |
| Core Architecture | 8-bit |
| Program Memory Type | Flash |
| Internal Oscillator | Present |
| Communication Interfaces | I2C, SPI, UART/USART |
| Peripherals | POR, WDT, Brown-out |
| Packaging | Tube |
ڕێنمایی ڕێکخستنی پینی PIC16F917-E/PT 44-tqfp (10 x 10 mm)
ڕێکخستنی پین بۆ PIC16F917-E/PT (پاکێجی 44-tqfp (10 x 10 mm)). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ PIC16F917-E/PT.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
PIC16F917-E/PT گونجاوە بۆ 6 بەکارھێنانs: Industrial Control Panels, Environmental Monitoring, Programmable Relay Controllers, Serial Interface Products, Motor and Pump Control, Programmable Logic and Data Acquisition.
Industrial Control Panels
The PIC16F917-E/PT fits compact supervisory and sequencing panels because it combines 20 MHz processing, 14 KB of flash program memory, 352 bytes of RAM, and a broad GPIO complement. The MCU can monitor switches and sensors, drive indicators and relays, and execute firmware-based interlocks without a separate logic controller. Its -40°C to +125°C rated family specification supports equipment intended for wide ambient environments. Confirm that the chosen relay drivers, power supply, and output stages handle the required load, while retaining isolation and surge protection outside the microcontroller.
پێشنیارکراو
Environmental Monitoring
The PIC16F917-E/PT is suitable for environmental monitoring instruments that combine analog sensing with multiple digital status signals. Its 10-bit ADC can digitize suitable sensor outputs, while 352 bytes of RAM provides working space for calibration values, filtering, sampling state, and display updates. The 8-bit CPU and 20 MHz clock are adequate for periodic measurements, threshold evaluation, alarm handling, and serial reporting. Place analog inputs away from switching regulators and relay wiring, and verify the ADC conversion time and sensor bandwidth in the manufacturer electrical tables.
پێشنیارکراو
Programmable Relay Controllers
PIC16F917-E/PT can serve as the programmable controller in relay, contactor, pump, or actuator assemblies. Its available I/O allows multiple commands and interlocks to be managed from one firmware image, while flash memory supports field updates. The 20 MHz processor can execute deterministic state-machine logic, debounce inputs, and operate timers for pump cycles or sequential outputs. External drivers are still required because the MCU controls logic levels rather than directly switching high-energy loads. Validate isolation, flyback paths, contactor hold current, and fault-response timing.
پێشنیارکراو
Serial Interface Products
The PIC16F917-E/PT is appropriate for embedded serial bridges, configuration tools, and protocol adapters because the PIC16F91x family provides I2C, SPI, and UART/USART connectivity. Its 14 KB flash memory can hold protocol drivers and application logic, while 352 bytes of RAM supports buffering and state management. Use dedicated level-shifting or protection components when connected to longer cables or non-3.3 V-compatible devices. Confirm logic levels, maximum bus rates, pin multiplexing, and peripheral timing from the complete manufacturer documentation.
پێشنیارکراو
Motor and Pump Control
PIC16F917-E/PT can coordinate low-complexity motors, pumps, valves, and position-independent actuators through timer-driven control and digital interlocks. Its 20 MHz performance is sufficient for pulse generation, direction sequencing, switch debouncing, and fault-state handling, while 352 bytes of RAM supports operating counters and short command buffers. The controller should operate alongside a suitable transistor, MOSFET, or motor-driver stage rather than driving loads directly. Validate start current, inductive transients, thermal margins, and safety timeouts for the final actuator.
پێشنیارکراو
Programmable Logic and Data Acquisition
The PIC16F917-E/PT can implement deterministic programmable-logic functions while also handling 10-bit analog acquisition. Designers can use flash-resident firmware to coordinate sampling, threshold decisions, event logging, and digital outputs without adding a separate FPGA. The 8-bit architecture and 20 MHz clock suit compact control tasks where instruction simplicity and deterministic peripheral operation are valuable. Account for RAM limits when buffering multiple channels, and use the manufacturer timing tables to establish valid sampling intervals and interrupt latency.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ PIC16F917-E/PT — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | PIC16F917-I/PT | PIC16F917T-E/PT |
|---|---|---|---|
| Package | 44-TQFP (10 x 10 mm) | 44-TQFP (10 x 10 mm) | 44-TQFP (10 x 10 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Architecture | 8-bit | 8-bit | 8-bit |
| Maximum CPU Frequency | 20 MHz | 20 MHz | 20 MHz |
| Program Memory | 14 KB (8K x 14) | 14 KB (8K x 14) | 14 KB (8K x 14) |
| RAM Size | 352 x 8 bits | 352 x 8 bits | 352 x 8 bits |
| Temperature Suffix | E | I | T-E |
| ADC Resolution | 10 bit | 10 bit | 10 bit |
| Communication Interfaces | I2C, SPI, UART/USART | I2C, SPI, UART/USART | I2C, SPI, UART/USART |
| Program Memory Type | Flash | Flash | Flash |
جیاکەرەوە سەرەکییەکان
- Extended-temperature ordering option (بەراورد بەPIC16F917-I/PT)
- Same PIC16F917 processing core and memory configuration (بەراورد بەPIC16F917-I/PT)
- Pin-compatible same-package upgrade path (بەراورد بەPIC16F917T-E/PT)
تێبینییەکانی دیزاین
Place input and output decoupling capacitors close to their corresponding power and ground pins, and keep analog inputs away from relay traces, switching-regulator outputs, and high-current return paths. Use the exact package drawing from Microchip document 41250D when defining the land pattern and thermal-pad connection. Verify whether the /PT variant requires a specific exposed-pad connection and preserve that requirement in the fabrication notes.
Design the power architecture around the device's supported operating voltage and I/O limits shown in the manufacturer electrical tables. Use a regulated supply with low ripple, local bulk capacitance for load transients, and decoupling near the MCU. If any I/O can exceed the MCU supply domain, use suitable isolation or level translation rather than relying on internal protection diodes.
Do not treat PIC16F917-E/PT, PIC16F917-I/PT, and PIC16F917T-E/PT as interchangeable without checking temperature grade and ordering information. The E/PT listing identifies an extended -40°C to +125°C range, while the I/PT variant carries the industrial grade suffix. Also avoid assuming that the reported 35-versus-36 I/O discrepancy reflects interchangeable pin functions; use the complete package-specific pin table for every board revision.
Route oscillator, programming, and communication signals away from noisy power-stage switching nodes. Keep programming connectors accessible and provide clean ground returns around the MCU. For mixed analog and digital circuitry, partition the layout by signal type, use a stable analog reference when required, and check signal-integrity effects from adjacent high-voltage or high-current traces before fabrication.
زانیاری پابەندبوون
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement appears in the verified MPN records. Confirm these attributes using Microchip's product declarations and current material-compliance documentation.