Microchip Technology

PIC18F258-I/SO - 8-Bit 40MHz CAN Flash MCU | Microchip

MPN: PIC18F258-I/SO ✗ کۆتایی ژیان
28-pin SOIC Package 40 MHz Speed 32 KB Memory
MOQ: 1 |

PIC18F258-I/SO گشتی

The Microchip Technology PIC18F258-I/SO is an 8-bit enhanced-flash PIC microcontroller with a 40 MHz core clock, 32 KB of program Flash memory, 1.5 KB of RAM, 256 bytes of EEPROM, and a 28-pin SOIC package. It also includes a 10-bit, 5-channel analog-to-digital converter and integrated CAN, I2C, SPI, and UART/USART interfaces. The -I/SO ordering code identifies the industrial-temperature and SOIC packaging options.

A PIC microcontroller is a programmable integrated circuit used to control embedded systems. Within the product hierarchy, this device is an 8-bit MCU, an embedded controller, and a semiconductor designed around the Microchip PIC18 architecture. Its combination of Flash program memory, serial interfaces, mixed-signal conversion, and CAN connectivity allows one device to manage embedded control, communications, and analog measurements without requiring several separate interface components.

Three headline capabilities define the PIC18F258-I/SO: 40 MHz operation, 32 KB of Flash memory, and integrated CAN communication. The 10-bit ADC provides five analog input channels for sensors and control loops, while 256 bytes of EEPROM preserve calibration or configuration values when the device loses its main power. The I2C, SPI, and UART/USART peripherals support displays, sensors, external memory, and service-console connections in industrial equipment.

The enhanced-flash PIC18 architecture provides an instruction execution rate described as up to 10 MIPS, with a 100 ns instruction execution target. Program memory can be rewritten in-circuit, supporting development, configuration updates, and field maintenance. Peripheral integration includes CAN 2.0A and CAN 2.0B support, two comparators, and a five-channel ADC, reducing the external component count in control and monitoring designs.

Typical applications include industrial motor and valve controllers, CAN-connected sensor nodes, instrumentation equipment, automotive accessory modules, building-control interfaces, and compact embedded data-acquisition systems. Its 28-pin SOIC package is practical for through-hole assembly and conventional industrial control boards, while the CAN peripheral is especially useful when multiple controllers must exchange diagnostic or process data.

Designers should confirm oscillator, reset, programming, and decoupling connections against the Microchip pin-description table for the selected package. Keep the MCLR and programming interfaces accessible for production programming, route sensitive analog inputs carefully, and validate CAN transceiver signal integrity with the selected external bus transceiver.

This product record combines the manufacturer device information, distributor component identification, family-level electrical details, package information, and application-specific engineering guidance. It also identifies same-package alternatives and highlights the memory, peripheral, temperature-grading, and qualification differences that must be checked before replacement.

جێگرەوەکانی جێگۆڕکێ بۆ PIC18F258-I/SO — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC18F258-I/SO (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Timers, Core Architecture, ADC, CAN Module.

Microchip Technology
Package: 28-pin SOIC (SO, wide-body, 7.50 mm)
Timers: 1 x 8-bit, 3 x 16-bit
Core Architecture: PIC18 (8-bit RISC, Harvard)
Microchip Technology
Package: 28-pin SOIC wide (SOIC-28W), 7.50 mm body width
Timers: 4 (Timer0/1/2/3)
ADC: 10-bit, 5 channels
Microchip Technology
Package: 28-pin SOIC (SO)
Timers: 3
ADC: 10-bit, up to 8 channels
Microchip Technology
Package: 28-pin SPDIP (SP), through-hole
Timers: 4 (Timer0/1/2/3)
Core Architecture: PIC 8-bit RISC
Microchip Technology
Package: 28-pin SOIC wide-body (SO), 0.295" / 7.50mm width
Timers: 4
Core Architecture: Enhanced Harvard (16-bit instruction / 8-bit data)
Microchip Technology
Package: 28-pin SOIC wide (SO)
Timers: Multiple 8-bit and 16-bit
Core Architecture: PIC18 (8-bit)
Microchip Technology
Package: 28-SOIC (SOIC-28, 7.50 mm wide body)
Core Architecture: PIC18 (8-bit RISC)
Microchip Technology
Package: 28-SOIC (7.50 mm body width)
Timers: 2 x 8-bit, 3 x 16-bit
Core Architecture: PIC 8-bit RISC (Harvard)
Microchip Technology
Package: 28-pin SOIC (SO)
ADC: 10-bit, 5 channels
Microchip Technology
Package: 28-SOIC (7.50 mm body width)
Timers: 2 x 8-bit + 1 x 16-bit
ADC: 10-bit, 5 channels

PIC18F2580-I/SO

✅ جێگرەوەی ڕاستەوخۆ
📦 28-pin SOIC
Same 28-pin SOIC footprint; later PIC18F258-family option, but program-memory, RAM, EEPROM, CAN, and peripheral differences must be verified before substitution.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

PIC18F248-I/SO

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 28-pin SOIC
PIC18 (8-bit RISC, Harvard) · 40 MHz · 10 MIPS · 16 KB (8K x 16 words) · 768 bytes · 256 bytes · 23 · 10-bit, 5 channels

پەیوەندی بۆ نرخ

بینینی داتاشیت →

PIC18F25K22-I/SO

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 28-pin SOIC
PIC18 (8-bit) · 64 MHz · 32 KB (16K x 16 words) · 1536 bytes · 256 bytes · 1.8 V to 5.5 V (range varies by configuration) · 25 · 10-bit, up to 19 channels

پەیوەندی بۆ نرخ

بینینی داتاشیت →

PIC18F2410-E/SO

✅ جێگرەوەی ڕاستەوخۆ
📦 28-pin SOIC
Same 28-pin SOIC footprint; lower-memory PIC18 device with different Flash, RAM, EEPROM, temperature-grade, and peripheral characteristics.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

PIC18F258T-I/SOG

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Microchip Technology
📦 28-pin SOIC
PIC18F · 8-bit PIC · Enhanced Harvard (16-bit instruction / 8-bit data) · 40 MHz · 10 MIPS · 32 KB (16K x 16 words) · 1.5 KB · 256 bytes

پەیوەندی بۆ نرخ

بینینی داتاشیت →

PIC18F258-I/SO زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type 8-bit enhanced-flash microcontroller
Maximum CPU Clock 40 MHz
Instruction Execution Rate 10 MIPS
Instruction Execution Time 100 ns
Flash Program Memory 32 KB
Program Memory Organization 16K x 16
RAM 1.5 KB
EEPROM 256 bytes
ADC Resolution 10 bits
ADC Channels 5 channels
CAN Support CAN 2.0A and CAN 2.0B
Serial Interfaces I2C, SPI, and UART/USART
Comparators 2
پاکێج 28-pin SOIC
جۆری دامەزراندن Surface mount
Temperature Grade Industrial grade
Programming Memory Type Enhanced Flash

ڕێکخستنی پینی PIC18F258-I/SO

Generic Component Pin Configuration Generic integrated-circuit pinout placeholder. Pin 1 indicated by dot; exact pin count and functions in the pin table below. 1 N 2 N-1 3 N-2 4 N-3 Pin Configuration See pin table below for pin functions Package-specific diagram not available
پین 1 MCLR/VPP/RE3 — Programming reset and alternate digital input
پین 2 RA0/AN0 — Port A input/output and analog input channel
پین 3 RA1/AN1 — Port A input/output and analog input channel
پین 4 RA2/AN2/VREF-/CVREF — Port A input/output, analog input, and reference function
پین 5 RA3/AN3/VREF+/C1OUT — Port A input/output, analog input, reference, and comparator output
پین 6 RA5/MCLR/C2OUT — Port A input/output, alternate reset, and comparator output
پین 7 VSS — Ground reference
پین 8 RB0/INT — Port B input/output and external interrupt
پین 9 RB1/INT — Port B input/output and external interrupt
پین 10 RB2 — Port B input/output
پین 11 RB3 — Port B input/output
پین 12 VDD — Positive supply voltage
پین 13 RB5 — Port B input/output
پین 14 RB4 — Port B input/output
پین 15 RB6/OSC1 — Port B input/output and oscillator input
پین 16 RB7/OSC2 — Port B input/output and oscillator output
پین 17 VSS — Ground reference
پین 18 RA6 — Port A input/output
پین 19 RA7 — Port A input/output
پین 20 VDD — Positive supply voltage
پین 21 RC0/T1OSO/T1CKI — Port C input/output and timer functions
پین 22 RC1/T1OSI/CCP2 — Port C input/output, timer, and capture/compare functions
پین 23 RC2/CCP1 — Port C input/output and capture/compare function
پین 24 RC3/SCK/SCL — Port C input/output and serial clock functions
پین 25 RC4/SDI/SDA — Port C input/output and serial data functions
پین 26 RC5/SDO — Port C input/output and serial data output
پین 27 OSC1/CLKO — Oscillator input and clock output
پین 28 OSC2 — Oscillator output

بەکارهێنانە باوەکان

PIC18F258-I/SO گونجاوە بۆ 6 بەکارھێنانs: Industrial CAN Control Nodes, Sensor and Signal Conditioning, Automotive Accessory Modules, Instrumentation and Data Acquisition, Building and HVAC Controls, Programmable Serial Controllers.

🏭

Industrial CAN Control Nodes

The PIC18F258-I/SO fits industrial control nodes that exchange commands and diagnostics over a CAN bus while also performing local control. Its 40 MHz CPU clock provides timing headroom for protocol handling and application logic, while the integrated CAN 2.0A/2.0B controller reduces the need for a separate communications controller. The five-channel 10-bit ADC can monitor pressure, temperature, or position sensors. Use an external CAN transceiver, provide bus termination where required, and verify the selected transceiver's logic compatibility with the MCU's CAN pins.

📡

Sensor and Signal Conditioning

The PIC18F258-I/SO is suitable for compact sensing and conditioning equipment built around analog inputs that require local processing. Its 10-bit, 5-channel ADC supports proportional sensors, potentiometers, dividers, and other analog signals, while the 256-byte EEPROM can retain calibration constants or configuration records. The 8-bit architecture and 1.5 KB of RAM are appropriate for moderate control loops rather than heavy signal processing. Keep analog routing away from oscillator and high-current digital paths, and calibrate the ADC against the selected reference and operating-temperature range.

🚗

Automotive Accessory Modules

The PIC18F258-I/SO can serve as the controller in compact vehicle accessory, body, or environmental modules where CAN communication and mixed-signal measurement are required. The 28-pin SOIC package supports conventional automotive PCB assembly, and the MCU combines CAN, ADC, EEPROM, and multiple serial interfaces. An automotive production design must confirm the exact temperature grade, automotive qualification status, transceiver choice, transient protection, and diagnostic requirements. The -I/SO ordering code identifies the industrial-temperature option, which should not be assumed to satisfy an AEC-Q100 vehicle requirement.

🖥️

Instrumentation and Data Acquisition

The PIC18F258-I/SO is useful for compact instrumentation that acquires several analog channels and exposes data through serial or CAN communication. Its five 10-bit ADC channels provide basic measurement capability, and the 32 KB of Flash offers substantially more program space than many small 8-bit controllers. Firmware can perform scaling, filtering, status logging, and protocol conversion before transmitting results. For laboratory-grade accuracy, evaluate external ADC resolution, reference stability, analog front-end design, calibration, and isolation instead of assuming the internal converter is sufficient.

🏠

Building and HVAC Controls

The PIC18F258-I/SO can coordinate HVAC actuators, environmental sensors, and service interfaces in a building-control subsystem. Its I2C and UART/USART interfaces suit sensor hubs and local consoles, while CAN supports centralized supervisory communication. The 256-byte EEPROM is useful for storing configuration values, and in-circuit Flash programming simplifies firmware maintenance. Design the control board with safe actuator isolation, robust power filtering, surge protection, and watchdog recovery so a communications fault cannot leave HVAC equipment in an unsafe state.

🔧

Programmable Serial Controllers

The PIC18F258-I/SO works well as a configurable embedded controller for protocols, test fixtures, and simple production equipment. Its I2C, SPI, and UART/USART peripherals can simultaneously connect sensors, memories, converters, and host computers, while two comparators support threshold or protection functions. The 40 MHz core supports responsive state-machine control and service menus. Production programming should use a fixture that exposes MCLR and the programming interface, and the firmware should include communication timeout handling, brownout recovery, and a defined restart sequence.

What are the key specifications of PIC18F258-I/SO that engineers should know?
The PIC18F258-I/SO is an 8-bit PIC18 flash microcontroller with a 40 MHz CPU clock, 32 KB of Flash memory, 1.5 KB of RAM, and 256 bytes of EEPROM. According to the Microchip PIC18F248/258/448/458 datasheet, it also provides a 10-bit, 5-channel ADC, CAN 2.0A/2.0B support, I2C, SPI, UART/USART, two comparators, and a 28-pin SOIC package. These resources make it suitable for embedded control systems that combine analog sensing, serial communication, and CAN networking.
Where can I download the PIC18F258-I/SO datasheet PDF?
The official PIC18F258 datasheet PDF is linked from the Microchip Technology PIC18F258 product page at https://www.microchip.com/en-us/product/PIC18F258. The family document covers PIC18F248, PIC18F258, PIC18F448, and PIC18F458 devices, including their 28-pin, 40-pin, and 44-pin package options. Use the pin-description and electrical-characteristics sections for the PIC18F258-I/SO ordering code, and verify the selected 28-pin SOIC footprint before PCB release.
What is the PIC18F258-I/SO pinout?
The PIC18F258-I/SO uses a 28-pin SOIC arrangement with power pins at pins 7, 12, 17, and 20. The device provides I/O ports RA, RB, and RC, dedicated MCLR, programming, oscillator, comparator, ADC, CAN, and serial-interface functions. According to the Microchip family datasheet, several pins support alternate peripheral functions, so PCB routing must use the exact package pin-description table rather than treating every port pin as a general-purpose GPIO. Verify programming access, oscillator placement, and CAN functions against that table.
What is the operating temperature range of PIC18F258-I/SO?
The -I/SO ordering code identifies the industrial-temperature option and the 28-pin SOIC package. The numerical operating-temperature limits are not stated in the product page text, so consult the Microchip ordering information and family datasheet before defining the worst-case thermal design. Temperature range affects MCU operation, programming voltage, and component qualification, while the SOIC suffix defines the board-level footprint and lead arrangement.
Where can I buy PIC18F258-I/SO and what is its price?
Use the Request a Quote form on this page to request current availability, volume pricing, and lead time for PIC18F258-I/SO. The part is identified as an industrial-grade 28-pin SOIC member of the 8-bit PIC18 family. Current commercial terms can vary with order quantity, date code, and supply status, so a quote is preferable to relying on a historical listing. Microchip lists the base PIC18F258 family as not recommended for new designs, which should also be considered in sourcing plans.
What is the lead time for PIC18F258-I/SO?
The current lead time for PIC18F258-I/SO should be confirmed through the Request a Quote form on this page. Because the base PIC18F258 family is classified by Microchip as not recommended for new designs, availability may depend on remaining factory inventory rather than a current high-volume production cycle. For a new product, ask the supplier to identify the manufacturer date code, package suffix, quantity, and any authorized-lot traceability requirements when returning the quotation.
Is PIC18F258-I/SO in stock?
Current PIC18F258-I/SO stock should be requested through the Request a Quote form on this page rather than assumed from an old distributor record. The manufacturer identifies the PIC18F258 family as not recommended for new designs, so inventory depth and replenishment can differ from active general-purpose MCU families. A sourcing request should specify the required quantity, 28-pin SOIC suffix, acceptable date code, target date, and whether an exact manufacturer lot or an interchangeable approved alternative is permitted.
What can replace PIC18F258-I/SO?
PIC18F2580-I/SO is the closest same-package replacement candidate because it retains the 28-pin SOIC format and belongs to the PIC18F258 family. According to the manufacturer family datasheet, PIC18F248, PIC18F258, PIC18F448, and PIC18F458 differ in several device characteristics, so memory capacity and peripheral availability must be checked before substitution. Other 28-pin PIC18 choices may share the footprint without matching every pin function, program-memory size, or peripheral capability.
Is PIC18F258-I/SO the same as PIC18F2580-I/SO?
PIC18F258-I/SO and PIC18F2580-I/SO are closely related 28-pin PIC18 devices, but they should not be treated as automatically identical. Microchip indicates that PIC18F2580 is a recommended consideration when the original PIC18F258 is marked not recommended for new designs, and discussions of the devices note enhancements around the CAN implementation. Confirm the pin assignments, Flash and RAM capacity, EEPROM, peripheral set, programming configuration, and lifecycle requirements in the manufacturer documentation before using one as a drop-in replacement.
When should I choose PIC18F258-I/SO over PIC18F248-I/SO?
Choose PIC18F258-I/SO when a design needs the full 32 KB of Flash and 1.5 KB of RAM provided by the 258 variant, while PIC18F248-I/SO offers less memory for a cost-sensitive design. The Microchip family datasheet identifies PIC18F248 and PIC18F258 as related 28-pin devices with differentiated memory resources. Before replacing the target with PIC18F248-I/SO, confirm that code size, RAM allocation, CAN operation, ADC channels, and all required peripheral functions still fit the reduced device.
Can PIC18F25K22-I/SO replace PIC18F258-I/SO?
PIC18F25K22-I/SO can serve as a possible redesign path, but it should be treated as a mixed-signal PIC18 alternative rather than an automatic drop-in replacement. The comparison record identifies the same 28-pin SOIC package, while the PIC18F25K22 belongs to a different PIC18 family generation with a different peripheral set. Its analog resources may better match sensor-centric designs, but CAN availability, pin multiplexing, memory organization, and programming requirements must be verified before PCB reuse is approved.
What is the best Microchip alternative for PIC18F258-I/SO?
PIC18F2580-I/SO is generally the first Microchip alternative to evaluate because it is a later same-family choice for a product family marked not recommended for new designs. PIC18F248-I/SO is another 28-pin family member, but it has fewer memory resources and may require application changes. The best replacement ultimately depends on code footprint, RAM, EEPROM, CAN requirements, ADC channel count, peripheral mapping, tooling support, and whether the existing PCB can be reused without rerouting.
PIC18F258-I/SO vs PIC18F2410-E/SO - which is better for a CAN controller?
PIC18F258-I/SO is the better starting choice for a CAN controller because the manufacturer identifies the 258 family with CAN 2.0A and CAN 2.0B support. PIC18F2410-E/SO appears in a package and feature comparison with the target, but its lower-memory positioning and different device capabilities require direct verification of CAN, ADC, and pin-function requirements. A CAN-based design also needs an appropriate external transceiver, termination strategy, and firmware initialization for the selected PIC18 device.
What power and decoupling guidance applies to PIC18F258-I/SO?
Place the required supply bypass capacitors close to the PIC18F258-I/SO VDD and VSS pins, following the connection and capacitance values in the Microchip family datasheet. The MCU contains high-gain switching logic, so long power traces can create transient supply noise and reduce ADC or oscillator reliability. Provide a clean return path, keep the 40 MHz oscillator loop compact, and separate analog and digital return currents where the board layout permits. Validate startup and ADC accuracy with the intended clock source and external circuitry.
Which programming tools are compatible with PIC18F258-I/SO?
The PIC18F258-I/SO is supported by the Microchip MPLAB development ecosystem and the MPLAB ICD 5 in-circuit debugger/programmer identified on the PIC18F258 product page. The programmer normally connects through the device's programming interface and MCLR/reset path, so production fixtures must expose the correct pins. Confirm the selected programmer header, target voltage, programming protocol, and device support in current Microchip tooling documentation before finalizing the fixture or schematic.
Is PIC18F258-I/SO RoHS and REACH compliant?
The PIC18F258-I/SO compliance status should be confirmed from the current Microchip product declaration or material-compliance documentation for the exact ordering code. The family is commonly identified in comparison records as RoHS- and REACH-related, but the product page text used for this record does not provide the formal declarations. For an industrial or automotive production release, retain the manufacturer declaration associated with the purchased lot and verify any customer-specific hazardous-substance requirements.

داتای سەرچاوەی ئەندازیاری بۆ PIC18F258-I/SO — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose PIC18F258-I/SO for an existing or maintenance design that specifically depends on its 32 KB Flash, 1.5 KB RAM, 256-byte EEPROM, five-channel 10-bit ADC, and integrated CAN controller. The 28-pin SOIC package is appropriate for conventional industrial and automotive PCB architectures, but the industrial-temperature grade is not automatically equivalent to AEC-Q100 qualification. For a new product, evaluate PIC18F2580-I/SO first because Microchip marks the base family as not recommended for new designs. PIC18F248-I/SO is appropriate only when its lower memory resources meet the application and CAN, EEPROM, and peripheral requirements remain intact. PIC18F25K22-I/SO may suit a redesigned mixed-signal system, but its different family and peripheral set require firmware and pin-function review. PIC18F2410-E/SO should be selected only when its memory and peripheral capabilities meet the complete specification. Treat every replacement as an engineering cross-reference rather than a footprint-only substitution.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە PIC18F2580-I/SO PIC18F248-I/SO PIC18F25K22-I/SO PIC18F2410-E/SO PIC18F258T-I/SO
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 28-pin SOIC 28-pin SOIC - same 28-pin SOIC - same 28-pin SOIC - same 28-pin SOIC - same 28-pin SOIC - same

جیاکەرەوە سەرەکییەکان

  • Higher memory configuration than the lower-memory PIC18F248 alternative (بەراورد بەPIC18F248-I/SO)
  • Direct CAN connectivity for networked embedded control (بەراورد بەPIC18F25K22-I/SO)
  • Integrated five-channel 10-bit converter for local analog measurement (بەراورد بەPIC18F2410-E/SO)
  • Closest later-generation same-family replacement path (بەراورد بەPIC18F2580-I/SO)

تێبینییەکانی دیزاین

Use the exact 28-pin SOIC footprint associated with PIC18F258-I/SO and verify courtyard clearance against the selected PCB fabrication capability. Do not substitute the 28-pin plastic DIP or a different SOIC width without checking mechanical drawings. Place the required bypass capacitors close to VDD and VSS pins, provide short ground returns, and route MCLR and programming signals so the production fixture can engage them without removing surrounding components.

Keep the 40 MHz oscillator circuit directly adjacent to OSC1 and OSC2, with its ground return following the layout guidance in the Microchip family datasheet. Avoid routing switching-node, relay, or high-current motor traces beneath the oscillator or analog inputs. If the ADC is used for precision measurements, partition analog and digital paths, keep the reference capacitor connection short, and provide a stable analog ground strategy that supports the selected measurement accuracy.

Do not assume that every 28-pin PIC18 device is a functional substitute for PIC18F258-I/SO. Check Flash capacity, RAM, EEPROM, ADC channels, CAN operation, oscillator pins, interrupt mapping, and alternate peripheral functions before releasing a cross-reference. The PIC18F258 family is marked not recommended for new designs, so a new design should evaluate PIC18F2580 or another supported PIC18 option and complete firmware, timing, and mixed-signal validation rather than making a footprint-only substitution.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The -I/SO ordering code identifies an industrial-temperature device in a SOIC package. Formal RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive-qualification declarations are not stated in the manufacturer product text used for this record; confirm the declarations for the exact orderable MPN.

داتا پشتڕاستکراوەتەوە لە: 2026-11-04 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

pic18f258 datasheet PIC18F258-I/SO datasheet PIC18F258-I/SO datasheet pdf PIC18F258-I/SO pinout PIC18F258-I/SO equivalent PIC18F258-I/SO replacement PIC18F258-I/SO cross reference PIC18F258-I/SO vs PIC18F2580-I/SO PIC18F258-I/SO 28 pin SOIC PIC18F258-I/SO CAN microcontroller PIC18F258-I/SO price PIC18F258-I/SO stock Microchip PIC18F258-I/SO PIC18F258 40MHz 32KB flash PIC18F258-I/SO programming tool

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology PIC18F258-I/SO PIC18F258 PIC18F2580-I/SO PIC18F248-I/SO PIC18F25K22-I/SO PIC18F2410-E/SO PIC18F258T-I/SO PIC18F2580 PIC18 8-bit microcontroller embedded controller semiconductor enhanced-flash microcontroller CAN 2.0A CAN 2.0B CAN bus 10-bit ADC UART/USART I2C SPI EEPROM 28-pin SOIC SOIC package family surface-mount package MPLAB ICD 5 industrial temperature grade
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ