PIC18F4321-I/P - 8-Bit 40MHz Flash MCU | Microchip
MPN: PIC18F4321-I/P ✓ چالاکPIC18F4321-I/P گشتی
A PIC microcontroller is an embedded processing device designed to execute control and measurement tasks in a dedicated system. PIC18F devices belong to the enhanced-flash 8-bit MCU hierarchy, combining program memory, digital I/O, analog conversion, timers, serial interfaces, and low-power features in one integrated component. The PIC18F4321 therefore serves as the central controller in applications that require local sensing, actuator control, and compact embedded logic.
The PIC18F4321-I/P includes 36 I/O pins, a 10-bit analog-to-digital converter with 13 channels, and two comparators. Its serial peripherals can operate as a three-wire SPI interface or a two-wire serial interface, while two capture/compare/PWM functions support timing, pulse-width modulation, and motor-control tasks. Self-programming and an ICD interface provide practical programming and in-circuit debugging options.
Its enhanced flash architecture supports firmware updates, and the family documentation describes upward software compatibility paths with earlier PIC16C5X, PIC12CXXX, PIC16CXX, and PIC17CXX device classes. The 100 ns instruction execution capability supports a 40 MHz operating speed, while nanoWatt Technology provides power-management options for systems that spend substantial time idle or operating selected peripherals at reduced activity.
Typical uses include industrial monitoring equipment, temperature and sensor-control systems, motor controllers, embedded instrumentation, and compact consumer products. Its 13 ADC channels make it suitable for reading analog sensors, while the PWM and comparator resources help implement closed-loop control, signal qualification, or actuator drive functions without requiring separate analog devices.
When laying out a board, reserve a decoupling capacitor near each supply pin, keep sensitive analog inputs away from switching nodes and high-current outputs, and route programming and debug signals for reliable operation. The -I/P temperature grade and PDIP package are appropriate when through-hole assembly, socket compatibility, or a wider industrial temperature range is preferred over a compact surface-mount footprint.
This product page combines manufacturer specifications, interface and memory details, application guidance, and same-footprint alternative comparisons. It is designed to help engineers evaluate firmware compatibility, peripheral coverage, package constraints, and replacement risk before integrating the PIC18F4321-I/P into an embedded control system.
جێگرەوەکانی جێگۆڕکێ بۆ PIC18F4321-I/P — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC18F4321-I/P (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Timers, Package, Operating Temperature, Program Memory (Flash), Mounting Type.
PIC18F47Q84-I/P
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC18F4421-I/P
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC18F4521-I/P
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC18F4523-I/P
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC18F4525-I/PT
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC18F4321-I/P زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Controller Type | 8-bit CMOS microcontroller |
| زۆرترین فرێکوێنسیی کاتژمێر | 40 MHz |
| Instruction Execution Rate | 10 MIPS |
| Instruction Cycle Time | 100 ns |
| Program Memory Type | Enhanced Flash |
| Program Memory Size | 8 KB |
| Program Memory Organization | 4K x 16 words |
| RAM Size | 512 bytes |
| EEPROM Size | 256 bytes |
| Supply Voltage Range | 4.2 V to 5.5 V |
| I/O Pin Count | 36 pins |
| ADC Resolution | 10 bits |
| ADC Channel Count | 13 channels |
| Comparator Count | 2 |
| Capture/Compare/PWM Module Count | 2 |
| Instruction Set Size | 77 single-word instructions |
| Serial Interface | 3-wire SPI or 2-wire serial interface |
| پاکێج | 40-pin PDIP, 0.600 inch |
| Self-Programming | Supported |
| Programming and Debugging | ICD interface supported |
| Low-Power Technology | nanoWatt Technology |
ڕێنمایی ڕێکخستنی پینی PIC18F4321-I/P 40-pin pdip, 0.600 inch
ڕێکخستنی پین بۆ PIC18F4321-I/P (پاکێجی 40-pin pdip, 0.600 inch). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ PIC18F4321-I/P.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
PIC18F4321-I/P گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor Monitoring, Temperature and Analog Control, Motor and PWM Control, Embedded Data Acquisition, Battery-Powered Embedded Instrument, Programmable Logic and Timing Control.
Industrial Sensor Monitoring
The PIC18F4321-I/P fits industrial monitoring systems that combine several analog measurements with local control and serial reporting. Its 13-channel, 10-bit ADC can sample pressure, temperature, level, or process inputs, while 36 I/O pins support digital sensors, alarm outputs, and status indicators. The MCU operates at up to 40 MHz and 10 MIPS, allowing control logic to execute between sensor reads. SPI and a 2-wire serial interface provide flexible links to displays, data loggers, or remote measurement nodes. The 40-pin PDIP package also simplifies through-hole assembly and socket-based maintenance in equipment where field replacement is important.
پێشنیارکراو
Temperature and Analog Control
The PIC18F4321-I/P is appropriate for temperature controllers, setpoint systems, and analog process loops where local autonomy is valuable. Thirteen 10-bit ADC channels provide inputs for sensing elements, while two comparators can support threshold detection or fast hardware qualification. Two capture/compare/PWM functions can drive heaters, fans, or proportional-control outputs without continuous software polling. With 8 KB of enhanced Flash, 512 bytes of RAM, and 256 bytes of EEPROM, the device accommodates compact control code, calibration constants, and communication routines. Its 40 MHz clock also supports responsive sampling and stable timing in process-control loops.
پێشنیارکراو
Motor and PWM Control
The two capture/compare/PWM modules in PIC18F4321-I/P make it suitable for small motors, valves, and actuator-control systems. PWM outputs can regulate motor speed, valve position, or power stage duty cycle, while input-capture functions can measure timing events. The 36 available I/O pins permit connection of position sensors, limit switches, status LEDs, and gate-driver control signals. A 10 MIPS execution rate allows the firmware to combine timing functions with supervisory logic and communications. Designers should use the manufacturer pin-description table to map timer outputs and verify the exact 40-pin PDIP signal assignments on the PCB.
پێشنیارکراو
Embedded Data Acquisition
PIC18F4321-I/P can serve as a compact data-acquisition controller for equipment that records sensor activity without a separate host processor. The 13-channel ADC supports multiplexed analog measurements, and 256 bytes of EEPROM can retain configuration values or small event records. Enhanced Flash supports firmware storage and self-programming, while SPI enables connection to higher-speed storage or external peripherals. The 2-wire serial interface is suitable for low-speed communication with a display, converter, or remote sensor node. Because RAM is limited to 512 bytes, acquisition firmware should use buffering carefully or stream data directly rather than retaining large sample blocks in internal memory.
پێشنیارکراو
Battery-Powered Embedded Instrument
PIC18F4321-I/P is suitable for compact, battery-powered instruments in which a low pin count, analog measurement, and low-power behavior are more important than maximum processing capacity. Its nanoWatt Technology provides power-management capabilities, and the 8-bit architecture supports economical control of displays, sensors, and switches. The 40-pin PDIP package is useful where through-hole assembly, socket compatibility, or serviceability outweigh board area. Designers can use comparator and timer resources to reduce the need for continuous CPU polling, while the serial peripherals provide efficient sensor or host communication. Actual battery life should be calculated from the selected operating mode, oscillator configuration, and measured peripheral activity.
پێشنیارکراو
Programmable Logic and Timing Control
The PIC18F4321-I/P can implement compact programmable-logic, event-counting, and sequencing functions where a small MCU is more practical than a dedicated FPGA or complex timer IC. Two capture/compare/PWM modules provide timing generation and event capture, while the 36 I/O lines create ample connections for sensors, interlocks, and output stages. The 40 MHz clock and 10 MIPS execution rate support coordinated state-machine operation. A bootloader can use the device's self-programming capability for controlled firmware updates, while the ICD interface simplifies development and debugging. Production designs should verify oscillator start-up, programming pins, and unused I/O states against the family data sheet.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ PIC18F4321-I/P — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | PIC18F47Q84-I/P | PIC18F4421-I/P | PIC18F4521-I/P | PIC18F4523-I/P | PIC18F4525-I/P |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | PDIP-40 | PDIP-40 - same package class | PDIP-40 - same package class | PDIP-40 - same package class | PDIP-40 - same package class | PDIP-40 - same package class |
| Program Flash | 8 KB | 128 KB | 64 KB | 128 KB | 128 KB | 128 KB |
| Data EEPROM | 256 bytes | 1,024 bytes | 256 bytes | 256 bytes | 256 bytes | 256 bytes |
| Maximum Clock Frequency | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| Architecture | 8-bit PIC18 enhanced-Flash MCU | 8-bit PIC18 enhanced-Flash MCU | 8-bit PIC18 enhanced-Flash MCU | 8-bit PIC18 enhanced-Flash MCU | 8-bit PIC18 enhanced-Flash MCU | 8-bit PIC18 enhanced-Flash MCU |
| Self-Programming | Supported | Supported | Supported | Supported | Supported | Supported |
جیاکەرەوە سەرەکییەکان
- Lower memory footprint simplifies constrained firmware designs (بەراورد بەPIC18F47Q84-I/P)
- Lower capacity can reduce firmware and RAM requirements (بەراورد بەPIC18F4521-I/P)
- EEPROM is sufficient for compact calibration and configuration data (بەراورد بەPIC18F47Q84-I/P)
- Same-package family options provide upgrade paths (بەراورد بەPIC18F4421-I/P)
تێبینییەکانی دیزاین
Place the required supply bypass capacitors directly beside the PIC18F4321-I/P VDD and VSS connections, with the shortest practical return path to the ground plane. Keep the 40-pin PDIP footprint free of copper or conductive debris beneath the device where practical, because exposed leads can bridge adjacent pins. Use the manufacturer package drawing for the definitive 0.600 inch row spacing and pin numbering.
Route oscillator traces short, keep them away from analog inputs and switching-node wiring, and provide a clean ground reference beneath the oscillator region. The ADC inputs should have controlled impedance and minimal resistive loading; source impedance must remain compatible with the acquisition circuitry and the device's sampling requirements. If PWM outputs drive switching power stages, separate their return-current paths from sensitive analog returns.
Estimated: with a 5.0 V supply, a 3.3 V regulated output, and a 20 mA load, the regulator or series path dissipates approximately 34 mW before regulator efficiency is considered. The MCU itself can add internal and I/O loading, so calculate the complete rail budget rather than relying on nominal logic current alone. Verify the 4.2 V to 5.5 V operating range across temperature and confirm every peripheral remains within its specified voltage limits.
Do not treat a package-compatible MCU as a firmware-compatible MCU without checking oscillator configuration, configuration words, peripheral mappings, interrupt priorities, and memory sizing. PIC18F47Q84-I/P provides substantially more Flash and RAM than PIC18F4321-I/P, while other PIC18F variants can differ in analog and timer resources. Validate the complete build, boundary conditions, bootloader, and peripheral register configuration before production substitution.
زانیاری پابەندبوون
The target is identified as an active industrial-grade PIC18 microcontroller. Compliance declarations for the exact suffix were not stated, so they remain unknown. AEC-Q100 is not applicable because no automotive qualification is identified.