PIC18F4420-I/P - 40MHz 8-Bit Flash MCU | Microchip
MPN: PIC18F4420-I/P ✓ چالاکPIC18F4420-I/P گشتی
A PIC18 microcontroller combines an 8-bit CPU, program memory, data memory, and peripherals on one integrated circuit. The PIC18F4420 belongs to the PIC18 enhanced-Flash family and sits within the hierarchy of 8-bit MCU, embedded controller, microcontroller, and semiconductor. Its nanoWatt Technology supports power-conscious operation, while the enhanced architecture provides a practical balance between processing capability, peripheral integration, and program-memory capacity.
Principal features include operation up to 40 MHz, 16 KB of Flash program memory, 768 bytes of RAM, and 256 bytes of nonvolatile EEPROM. The device provides 13 channels of 10-bit analog-to-digital conversion, two comparators, 36 I/O pins, an internal oscillator, a fail-safe clock monitor, and a watchdog timer. These resources make it suitable for control systems that need mixed analog and digital sensing without a separate processor.
The PIC18F4420-I/P uses a RISC-based PIC18 CPU and provides up to 10 MIPS according to the family documentation. An internal oscillator supports approximately 31 kHz to 8 MHz operation, while a 4× PLL can extend the clock to as high as 32 MHz when required by the design. Its 4.2 V to 5.5 V supply range places it in the traditional 5 V microcontroller class rather than the lower-voltage nanoWatt operating range of related LF devices.
Typical uses include industrial control panels, temperature controllers, data-acquisition modules, motor-control interfaces, appliance controllers, and compact instrumentation. The 13-channel 10-bit ADC is especially useful for monitoring analog sensors, while the comparator outputs and digital I/O support threshold detection, timing functions, and external interface logic.
When laying out a circuit, treat every I/O pin as a potentially sensitive analog or digital node, provide decoupling at the supply pins, and confirm the oscillator configuration through programming rather than assuming the maximum clock is always active. The -40°C to +85°C industrial temperature designation supports a broad range of commercial and industrial ambient conditions.
This product page combines the manufacturer specifications, package details, practical engineering guidance, and pin-compatible alternatives in a format designed to accelerate component selection, schematic review, PCB planning, and sourcing for PIC18F4420-I/P designs.
جێگرەوەکانی جێگۆڕکێ بۆ PIC18F4420-I/P — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC18F4420-I/P (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Operating Temperature, Timers, Core, Program Memory (Flash).
PIC18F44K22-I/P
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC18F4520-I/P
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC18LF4431-I/P
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC16LF1517-E/P
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC18F2520-I/P
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC18F4420-I/P زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 8-bit RISC flash microcontroller |
| CPU Architecture | PIC18 RISC, 8-bit |
| زۆرترین فرێکوێنسیی کاتژمێر | 40 MHz |
| Maximum CPU Performance | 10 MIPS |
| Program Memory | 16 KB Flash |
| Data RAM | 768 bytes |
| Data EEPROM | 256 bytes |
| ADC Resolution | 10 bits |
| ADC Channels | 13 channels |
| Comparator Count | 2 |
| I/O Pin Count | 36 pins |
| Supply Voltage Range | 4.2 V to 5.5 V |
| مەودای پلەی گەرمیی کارکردن | -40°C to +85°C |
| Internal Oscillator Range | 31 kHz to 8 MHz |
| PLL Maximum Frequency | 32 MHz |
| پاکێج | PDIP-40 |
| Package Width | 0.600 inch |
| Process Technology | CMOS |
| Watchdog Timer | Yes |
| Fail-Safe Clock Monitor | Yes |
| دۆخی چرخەی ژیان | Active |
ڕێکخستنی پینی PIC18F4420-I/P
| پین 1 | MCLR/VPP/PGM — Master clear reset, programming voltage, and programming mode input |
| پین 2 | RA0/AN0/C12IN0- — Port A digital input/output, analog input channel 0, or comparator input |
| پین 3 | RA1/AN1/C12IN1- — Port A digital input/output, analog input channel 1, or comparator input |
| پین 4 | RA2/AN2/VREF-/CVREF/C2IN+ — Port A digital input/output, analog input channel 2, or voltage-reference and comparator function |
| پین 5 | RA3/AN3/VREF+/C1IN+ — Port A digital input/output, analog input channel 3, or voltage-reference and comparator function |
| پین 6 | RA4/T0CKI/C1OUT — Port A digital input/output, timer clock input, or comparator output |
| پین 7 | RA5/AN4/SS/C2OUT — Port A digital input/output, analog input channel 4, or comparator output |
| پین 8 | VSS — Ground reference |
| پین 9 | RA7/AN7/OSC1/CLKO — Port A digital input/output, analog input channel 7, oscillator input, or clock output |
| پین 10 | RA6/AN6/OSC2 — Port A digital input/output, analog input channel 6, or oscillator output |
| پین 11 | RC0/T1OSO/T1CKI — Port C digital input/output or timer oscillator and clock input |
| پین 12 | RC1/T1OSI/CCP2 — Port C digital input/output, timer oscillator input, or capture/compare output |
| پین 13 | RC2/CCP1 — Port C digital input/output or capture/compare output |
| پین 14 | RC3/SCK/SCL — Port C digital input/output, SPI clock, or I2C clock |
| پین 15 | RC4/SDI/SDA — Port C digital input/output, SPI data input, or I2C data |
| پین 16 | RC5/SDO — Port C digital input/output or SPI data output |
| پین 17 | RC6/TX/CK — Port C digital input/output, asynchronous transmit, or synchronous clock |
| پین 18 | RC7/RX/DT — Port C digital input/output, asynchronous receive, or synchronous data |
| پین 19 | VSS — Ground reference |
| پین 20 | VDD — Positive supply voltage |
| پین 21 | RB0/INT — Port B digital input/output or external interrupt input |
| پین 22 | RB1/INT — Port B digital input/output or external interrupt input |
| پین 23 | RB2/CCP2 — Port B digital input/output or capture/compare output |
| پین 24 | RB3/CCP1 — Port B digital input/output or capture/compare output |
| پین 25 | RB4/DBP1 — Port B digital input/output or debug/program data pin |
| پین 26 | RB5/DBP2 — Port B digital input/output or debug/program data pin |
| پین 27 | RB6/PGM — Port B digital input/output or programming mode input |
| پین 28 | RB7/PGD — Port B digital input/output or programming data input/output |
| پین 29 | VSS — Ground reference |
| پین 30 | VDD — Positive supply voltage |
| پین 31 | RD0/PD0/C12D0 — Port D digital input/output or parallel-display data function |
| پین 32 | RD1/PD1/C12D1 — Port D digital input/output or parallel-display data function |
| پین 33 | RD2/PD2/C12D2 — Port D digital input/output or parallel-display data function |
| پین 34 | RD3/PD3/C12D3 — Port D digital input/output or parallel-display data function |
| پین 35 | RD4/PD4/C12D4 — Port D digital input/output or parallel-display data function |
| پین 36 | RD5/PD5/C12D5 — Port D digital input/output or parallel-display data function |
| پین 37 | VSS — Ground reference |
| پین 38 | VDD — Positive supply voltage |
| پین 39 | VSS — Ground reference |
| پین 40 | VDD — Positive supply voltage |
بەکارهێنانە باوەکان
PIC18F4420-I/P گونجاوە بۆ 6 بەکارھێنانs: Industrial Temperature Control, Multichannel Data Acquisition, Motor and Actuator Control, Appliance and Equipment Control, Battery-Powered Field Instruments, Programmable Logic and Embedded Control.
Industrial Temperature Control
The PIC18F4420-I/P fits industrial temperature controllers because it combines a -40°C to +85°C operating range with 13 channels of 10-bit ADC and two hardware comparators. The microcontroller can acquire measurements from thermistors, RTDs, or transducer-conditioned signals while controlling relays, valves, or heater stages through its 36 I/O pins. Its 16 KB Flash can hold control logic, calibration tables, and communication routines, although firmware budgeting is important. Operate the MCU from a regulated 4.2 V to 5.5 V rail and isolate sensor inputs from switching nodes.
پێشنیارکراو
Multichannel Data Acquisition
For compact data-acquisition equipment, the PIC18F4420-I/P provides 13 ADC channels, a 10-bit conversion resolution, 768 bytes of RAM, and 256 bytes of EEPROM in one 40-pin package. It can sample multiple analog inputs, apply calibration and filtering, and transfer results through a suitable serial interface. The 36 available I/O pins leave room for digital status signals, triggers, and front-panel controls. Engineers should budget processing time between samples, account for analog-reference accuracy, and choose external memory if continuous high-rate logging exceeds the internal RAM and EEPROM capacities.
پێشنیارکراو
Motor and Actuator Control
The PIC18F4420-I/P is appropriate for small motor-control and actuator-monitoring systems where a 5 V controller, timers, comparators, and multiple digital inputs are required. Its 36 I/O pins can accept limit switches, position sensors, and control commands, while the two comparators can perform hardware threshold detection. The 40 MHz maximum clock provides additional execution headroom for control algorithms and diagnostics. Choose pin-compatible driver circuitry for motors rather than driving load current directly from the MCU, and include protection for inductive transients, back-EMF, and supply disturbance.
پێشنیارکراو
Appliance and Equipment Control
The PIC18F4420-I/P supports compact appliance controllers that combine analog sensing with direct user-interface and actuator handling. Its 16 KB Flash is useful for fixed control functions, while 256 bytes of EEPROM can retain settings, counters, and calibration values across power cycles. The 13-channel ADC supports temperature, level, or pressure sensing, and the watchdog timer supports recovery from unexpected firmware or hardware conditions. Design the keypad and display interface around the available I/O budget and ensure mains-connected subsystems retain appropriate galvanic isolation and safety barriers.
پێشنیارکراو
Battery-Powered Field Instruments
The PIC18F4420-I/P can serve as the control processor in portable field instruments that operate from a regulated 5 V rail. Its 36 I/O pins allow connection to sensors, status indicators, and low-power communication hardware, while the 10-bit ADC supports analog field measurements. The fail-safe clock monitor and watchdog timer improve recovery behavior in unattended equipment. Because this I/P version requires 4.2 V to 5.5 V, power-budget design should focus on regulator efficiency, sleep-state effectiveness, and load switching rather than treating it as a direct 3 V nanoWatt solution.
پێشنیارکراو
Programmable Logic and Embedded Control
The PIC18F4420-I/P is useful for small programmable-logic products requiring conditional sequencing, analog monitoring, and stored configuration. At up to 40 MHz, the PIC18 CPU provides enough timing flexibility for debouncing, event counting, pulse measurement, and supervisory logic. Sixteen kilobytes of Flash accommodates a focused control program, while the EEPROM provides nonvolatile configuration storage. Two comparators can handle fast threshold events, and the watchdog timer can restart the controller after a fault. For designs needing more code space or communications resources, select a same-package alternative with additional Flash rather than compressing production code unnecessarily.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ PIC18F4420-I/P — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | PIC18F44K22-I/P | PIC18F4520-I/P | PIC18LF4431-I/P | PIC16LF1517-E/P | PIC18F2520-I/P |
|---|---|---|---|---|---|---|
| Package | PDIP-40 | PDIP-40 | PDIP-40 | PDIP-40 | PDIP-40 | PDIP-40 |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Memory | 16 KB Flash | 16 KB Flash | 32 KB Flash | 16 KB Flash | 14 KB Flash | 32 KB Flash |
| Pin Count | 40 pins | 40 pins | 40 pins | 40 pins | 40 pins | 40 pins |
جیاکەرەوە سەرەکییەکان
- Closest documented memory-and-package match (بەراورد بەPIC18F44K22-I/P)
- Exact target memory configuration avoids firmware reduction (بەراورد بەPIC16LF1517-E/P)
- Higher-memory upgrade path in the same package (بەراورد بەPIC18F4520-I/P)
- Broader supply-voltage option for lower-voltage designs (بەراورد بەPIC18LF4431-I/P)
تێبینییەکانی دیزاین
Use a stable 4.2 V to 5.5 V rail for the PIC18F4420-I/P and place the manufacturer-recommended bypass capacitors close to each VDD and VSS connection. Avoid routing motor, relay, or display-supply return current through the MCU ground region. If an analog measurement must remain accurate, use a separate low-noise regulator or filtered analog supply node and connect its return directly to the appropriate ground plane rather than sharing a high-current switching return.
Follow the PDIP-40 footprint and keep the socket or leads clear of nearby tall components. Programmable and sensitive analog signals should not run beside motor-switching nodes or high-current traces. Place the MCLR/PGM and PGD/PGM programming-access pins where an ISP or debugger can reach them. Because the 40-pin PDIP package has exposed through-hole leads, use adequate spacing between copper features to avoid bridging during soldering.
Do not confuse the /I/P ordering code with the /I/PT TQFP-44 variant; the physical packages and pin assignments differ. Also confirm that the programmed configuration selects a valid clock source and operating frequency. The maximum 40 MHz rating is not a default operating condition. Review unused I/O pins, analog inputs, and comparator-capable pins in the manufacturer pin-description table before finalizing the schematic and PCB.
For sensitive analog channels, keep sensor traces short, separate them from switching-current paths, and provide local input filtering. The ADC reference voltage directly affects measurement accuracy and noise, so reference routing and bypass placement require careful review. Digital outputs driving long cables or capacitive loads may need series damping or buffering. Validate timing with the configured oscillator rather than assuming performance from the 40 MHz maximum clock rating.
زانیاری پابەندبوون
No explicit compliance declarations were identified for this ordering code. The industrial -40°C to +85°C temperature designation does not by itself indicate AEC-Q100 qualification.