PIC18LF4320T-I/ML - 8KB Flash 8-Bit MCU 44-VQFN | Microchip
MPN: PIC18LF4320T-I/ML ✓ چالاکPIC18LF4320T-I/ML گشتی
A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash/ROM), data memory (RAM), and programmable peripherals. The PIC18F/LF family is Microchip's high-performance 8-bit architecture offering enhanced instruction set, C-friendly compiler support (MPLAB XC8), and nanoWatt Technology for dynamic power management. MCUs sit within the broader taxonomy of microprocessors -> computing ICs -> embedded processors -> microcontrollers, and dominate cost-sensitive, low-power embedded designs.
Key features include 36 digital I/O pins, a 10-bit ADC with up to 13 input channels, multiple serial interfaces (USART, MSSP for SPI/I2C), four timer modules, and nanoWatt power management modes. The 44-VQFN exposed pad package provides low thermal resistance for improved power dissipation in compact layouts, while the 8 KB flash supports typical mid-complexity embedded applications.
The architecture uses a 16-bit modified Harvard instruction set with an 8-bit data path, achieving up to 10 MIPS at 40 MHz. Internal PLL options allow flexible clocking from low-frequency crystals, and the device supports ICSP (In-Circuit Serial Programming) for field updates. Brown-out Reset, Power-on Reset, and a Watchdog Timer ensure reliable operation in industrial environments.
Typical applications include industrial sensor interfaces, HVAC controls, low-power remote sensing nodes, small appliance controllers, and consumer electronics requiring USB-free, USB-less connectivity. The 13-channel 10-bit ADC is well suited for analog sensor reading, while multiple PWM outputs enable motor or LED control tasks.
When designing with this device, ensure the exposed pad (EP) is soldered to a sufficiently large copper pour for thermal performance. The LF variant's low-voltage operation (down to 2.0 V) enables two-AA-battery or single Li-cell designs but does not support 5V-only analog performance of the F variant.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, supporting engineers searching for cross-reference, replacement, and integration guidance for the PIC18LF4320T-I/ML.
جێگرەوەکانی جێگۆڕکێ بۆ PIC18LF4320T-I/ML — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC18LF4320T-I/ML (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Timers, ADC, Core, Core Architecture.
PIC18LF4320-I/ML
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC18F4320-I/ML
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC18LF4320T-I/PT
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC18LF4221-I/ML
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC18LF4220-I/ML
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC18LF4320-I/PT
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC18LF4320T-I/ML زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Core Architecture | PIC 8-bit (PIC18 enhanced) |
| Program Memory Size | 8 KB (4K x 16) Flash |
| Data RAM | 512 bytes |
| EEPROM Size | 256 bytes |
| Maximum CPU Speed | 40 MHz (10 MIPS) |
| Operating Voltage Range | 2.0 V to 5.5 V |
| I/O Pins | 36 |
| ADC | 10-bit, up to 13 channels |
| پاکێج | 44-pin VQFN (ML) with Exposed Pad |
| پلەی گەرمیی کارکردن | -40C to +85C (Industrial) |
| جۆری دامەزراندن | Surface Mount |
| Packaging | Tape & Reel |
| Timers | 4 (Timer0/1/2/3) |
| Communication Interfaces | USART, MSSP (SPI/I2C) |
| RoHS Compliance | Compliant |
| Power-Saving Modes | nanoWatt Technology (Sleep, Idle) |
ڕێکخستنی پینی PIC18LF4320T-I/ML
| پین 1 | MCLR/VPP/RE3 — Master Clear (Reset) input / Programming voltage / PORTE bit 3 |
| پین 2 | RA0/AN0 — PORTA bit 0 / Analog input channel 0 |
| پین 3 | RA1/AN1 — PORTA bit 1 / Analog input channel 1 |
| پین 4 | RA2/AN2/VREF- — PORTA bit 2 / Analog input 2 / ADC VREF- |
| پین 5 | RA3/AN3/VREF+ — PORTA bit 3 / Analog input 3 / ADC VREF+ |
| پین 6 | RA4/T0CKI — PORTA bit 4 / Timer0 clock input |
| پین 7 | RA5/AN4/SS — PORTA bit 5 / Analog input 4 / SPI Slave Select |
| پین 8 | RE0/RD/AN5 — PORTE bit 0 / Read signal / Analog input 5 |
| پین 9 | RE1/WR/AN6 — PORTE bit 1 / Write signal / Analog input 6 |
| پین 10 | RE2/CS/AN7 — PORTE bit 2 / Chip Select / Analog input 7 |
| پین 11 | VDD — Positive supply voltage |
| پین 12 | VSS — Ground reference |
| پین 13 | OSC1/CLKI/RA7 — Oscillator input / External clock / PORTA bit 7 |
| پین 14 | OSC2/CLKO/RA6 — Oscillator output / Clock output / PORTA bit 6 |
| پین 15 | RC0/T1OSO/T1CKI — PORTC bit 0 / Timer1 oscillator out / Timer1 clock |
| پین 16 | RC1/T1OSI/CCP2 — PORTC bit 1 / Timer1 oscillator in / CCP2 |
| پین 17 | RC2/CCP1 — PORTC bit 2 / CCP1 PWM output |
| پین 18 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock |
| پین 19 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data |
| پین 20 | RC5/SDO — PORTC bit 5 / SPI data out |
| پین 21 | RC6/TX/CK — PORTC bit 6 / USART transmit / USART clock |
| پین 22 | RC7/RX/DT — PORTC bit 7 / USART receive / USART data |
| پین 23 | RB0/AN12/INT0 — PORTB bit 0 / Analog input 12 / External interrupt 0 |
| پین 24 | RB1/AN10/INT1 — PORTB bit 1 / Analog input 10 / External interrupt 1 |
| پین 25 | RB2/AN8/INT2 — PORTB bit 2 / Analog input 8 / External interrupt 2 |
| پین 26 | RB3/AN9/CCP2 — PORTB bit 3 / Analog input 9 / CCP2 |
| پین 27 | RB4/AN11 — PORTB bit 4 / Analog input 11 |
| پین 28 | RB5/PGM — PORTB bit 5 / LVP programming |
| پین 29 | RB6/PGC — PORTB bit 6 / ICSP clock |
| پین 30 | RB7/PGD — PORTB bit 7 / ICSP data |
| پین 31 | VDD — Positive supply voltage |
| پین 32 | VSS — Ground reference |
| پین 33 | RD0/PSP0 — PORTD bit 0 / Parallel Slave Port bit 0 |
| پین 34 | RD1/PSP1 — PORTD bit 1 / Parallel Slave Port bit 1 |
| پین 35 | RD2/PSP2 — PORTD bit 2 / Parallel Slave Port bit 2 |
| پین 36 | RD3/PSP3 — PORTD bit 3 / Parallel Slave Port bit 3 |
| پین 37 | RD4/PSP4 — PORTD bit 4 / Parallel Slave Port bit 4 |
| پین 38 | RD5/PSP5 — PORTD bit 5 / Parallel Slave Port bit 5 |
| پین 39 | RD6/PSP6 — PORTD bit 6 / Parallel Slave Port bit 6 |
| پین 40 | RD7/PSP7 — PORTD bit 7 / Parallel Slave Port bit 7 |
| پین 41 | VDD — Positive supply voltage |
| پین 42 | VSS — Ground reference |
| پین 43 | NC — Not connected (per datasheet) |
| پین 44 | NC — Not connected (per datasheet) |
بەکارهێنانە باوەکان
PIC18LF4320T-I/ML گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor Interface, HVAC Climate Control, Low-Power Remote Sensing Node, Small Appliance Controller, Automotive Accessory Module, USB-Free Consumer Electronics.
Industrial Sensor Interface
The PIC18LF4320T-I/ML is well-suited for industrial sensor interface modules requiring multi-channel analog acquisition. The integrated 13-channel 10-bit ADC provides direct connection to temperature, pressure, and flow sensors without external multiplexing. Its 2.0-5.5 V operating range accommodates both 3.3 V and 5 V transducer rails, while 36 GPIO pins handle multiple discrete sensor inputs and digital outputs. The -40C to +85C industrial temperature grade ensures reliable operation in factory-floor enclosures. nanoWatt Sleep mode drops quiescent current to nanoampere levels for battery-backed sensor nodes that wake periodically to log measurements.
پێشنیارکراو
HVAC Climate Control
HVAC controller boards benefit from the PIC18LF4320T-I/ML's combination of 8 KB flash for control firmware, 13 ADC channels for thermistor and humidity sensor inputs, and PWM outputs for damper and fan motor control. The MSSP peripheral supports SPI or I2C communication with external display drivers and EEPROM. nanoWatt Idle and Sleep modes reduce energy waste during standby periods. The wide 2.0-5.5 V supply range allows direct operation from rectified 5 V wall-adapter rails or 24 VAC control circuits with simple rectification.
پێشنیارکراو
Low-Power Remote Sensing Node
Battery-powered remote sensor nodes leverage the PIC18LF4320T-I/ML's LF low-voltage core operating down to 2.0 V, enabling direct connection to a single Li-ion cell or two AA batteries. nanoWatt Technology Sleep mode reduces quiescent current to under 100 nA, allowing multi-year battery life when the MCU wakes briefly to take ADC readings and transmit via UART. The 8 KB flash stores calibration coefficients and protocol stacks, while 512 bytes of RAM buffers sensor data. The exposed pad 44-VQFN package provides low thermal resistance for sustained operation in outdoor enclosures.
پێشنیارکراو
Small Appliance Controller
Consumer small appliances such as coffee makers, blenders, and washing machines use the PIC18LF4320T-I/ML for user-interface management and motor control. Four timer modules generate PWM signals for variable-speed motor drives, while the USART interfaces with LCD or LED display drivers. 36 GPIO pins handle keypad scanning, status LEDs, and relay outputs. The 44-VQFN package fits compact appliance PCBs, and industrial -40C to +85C temperature tolerance handles kitchen and laundry room environments. Brown-out Reset and Watchdog Timer ensure reliable recovery from supply glitches.
پێشنیارکراو
Automotive Accessory Module
The PIC18LF4320T-I/ML operates across the automotive 12 V nominal rail (regulated down to 5 V or 3.3 V) for accessory modules such as interior lighting controllers, seat-position memories, and aftermarket gauge clusters. Its 13-channel ADC reads multiple potentiometers and analog sensors simultaneously. The Watchdog Timer and Brown-out Reset ensure reliable recovery from automotive load-dump transients. Note that for AEC-Q100 qualified automotive designs, Microchip recommends the PIC18F series with the -I automotive grade; the PIC18LF4320T-I/ML is industrial grade only and not AEC-Q100 qualified.
پێشنیارکراو
USB-Free Consumer Electronics
Consumer devices that require moderate processing power without USB connectivity can leverage the PIC18LF4320T-I/ML's 8 KB flash and USART plus MSSP peripherals for peripheral interconnect. Typical uses include electronic toys, digital thermostats, simple point-of-sale terminals, and educational electronics kits. The MPLAB XC8 C compiler support allows developers to write portable firmware, while ICSP enables in-circuit programming during production. The 44-VQFN package suits miniaturized consumer form factors.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ PIC18LF4320T-I/ML — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | PIC18LF4320-I/ML | PIC18F4320-I/ML | PIC18LF4320T-I/PT | PIC18LF4221-I/ML | PIC18LF4220-I/ML |
|---|---|---|---|---|---|---|
| Package | 44-VQFN (ML) | 44-VQFN (ML) - same | 44-VQFN (ML) - same | 44-TQFP (PT) - pin-compatible electrically, different PCB footprint | 44-VQFN (ML) - same | 44-VQFN (ML) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 8 KB | 8 KB | 8 KB | 8 KB | 4 KB (-50%) | 4 KB (-50%) |
| RAM | 512 bytes | 512 bytes | 512 bytes | 512 bytes | 256 bytes (-50%) | 256 bytes (-50%) |
| Operating Voltage | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 4.2 V to 5.5 V (F variant) | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V |
| Max CPU Speed | 40 MHz (10 MIPS) | 40 MHz (10 MIPS) | 40 MHz (10 MIPS) | 40 MHz (10 MIPS) | 40 MHz (10 MIPS) | 40 MHz (10 MIPS) |
| I/O Pins | 36 | 36 | 36 | 36 | 36 | 36 |
| ADC | 10-bit, 13 channels | 10-bit, 13 channels | 10-bit, 13 channels | 10-bit, 13 channels | 10-bit, 13 channels | 10-bit, 13 channels |
| Packaging Format | Tape & Reel | Tray | Tray | Tape & Reel | Tray | Tray |
جیاکەرەوە سەرەکییەکان
- Low-voltage LF operation down to 2.0 V (بەراورد بەPIC18F4320-I/ML)
- Tape & Reel packaging for high-volume assembly (بەراورد بەPIC18LF4320-I/ML)
- VQFN package with exposed thermal pad (بەراورد بەPIC18LF4320T-I/PT)
- Highest flash density in 44-VQFN LF family (بەراورد بەPIC18LF4221-I/ML)
تێبینییەکانی دیزاین
The 44-pin VQFN (ML) package features an exposed thermal pad on the underside that MUST be soldered to a sufficiently large copper pour (typically at least 1 square inch) connected to the ground plane. Failure to solder the exposed pad will result in poor thermal performance and potential reliability issues under sustained load. Place decoupling capacitors (100 nF ceramic plus 10 uF bulk) as close as possible to each VDD pin pair to minimize switching noise.
The PIC18LF4320T-I/ML operates from 2.0 V to 5.5 V as an LF variant. nanoWatt Sleep mode reduces quiescent current to approximately 100 nA typical, but peripheral modules left enabled can increase this by orders of magnitude. Always disable unused peripherals via their PMDx registers before entering Sleep. For battery-powered designs, choose the LF variant specifically; do not assume F-variant parts will operate reliably below 4.2 V.
Do not confuse the PIC18LF4320T-I/ML (low-voltage LF variant, 2.0-5.5 V) with the PIC18F4320-I/ML (5 V F variant, 4.2-5.5 V). The two parts share pinout but have different voltage specifications and ADC performance characteristics. Also verify configuration bits match your application: oscillator selection (HS vs XT vs RC), Watchdog Timer enable, Brown-out Reset voltage, and Low-Voltage Programming disable must all be set correctly in the CONFIG registers.
Place the ICSP connector footprint (RB6/PGC, RB7/PGD, MCLR/VPP) at the board edge for easy in-circuit programming access during production. Route MCLR with a pull-up resistor to VDD and consider adding a capacitor to ground for noise filtering. Keep analog input traces short and away from digital switching signals to minimize ADC noise coupling; use a ground guard ring around analog input pins for best ADC accuracy.
زانیاری پابەندبوون
RoHS and lead-free compliant per Microchip product page. Industrial -40C to +85C temperature grade; NOT AEC-Q100 qualified - select PIC18F automotive-grade variants for vehicle applications. Conflict-minerals compliant per Microchip policy.