PIC24F08KM102-I/ML - 32MHz 16-Bit MCU | Microchip Technology
MPN: PIC24F08KM102-I/ML ✓ چالاکPIC24F08KM102-I/ML گشتی
A microcontroller is a programmable semiconductor that combines a processor core, nonvolatile program memory, data memory, and peripherals on one integrated circuit. Microchip PIC24F devices use a 16-bit architecture and provide dedicated hardware for analog measurement, control, and low-power operation. Within the product hierarchy, this device is a PIC24F XLP mixed-signal microcontroller intended to reduce component count in compact embedded systems.
Key features include 32 MHz processing, 8 KB Flash memory organized as 2.75K × 24 words, 1 KB SRAM, and a 12-bit ADC. The integrated DAC and op amps support applications in which a sensor output must be converted to a voltage, amplified, compared with a threshold, or conditioned without external analog components. The 1.8 V to 5.5 V operating range also allows the MCU to interface with low-voltage sensors and modern 3.3 V systems.
The integrated mixed-signal peripherals reduce board area and simplify firmware-driven measurement and control loops. A 12-bit ADC offers 4096 discrete quantization levels for an analog input range, while the DAC provides a programmable analog output. The CLC and comparator functions can support threshold detection and signal conditioning. Because this is a PIC XLP device, the manufacturer positions it for low-power, cost-sensitive embedded control rather than high-throughput processor applications.
Typical uses include battery-powered environmental monitoring, compact industrial sensing, consumer control panels, programmable analog signal generation, and low-cost motor or actuator control. The 28-pin QFN package is particularly useful where PCB area is constrained, while the exposed thermal pad assists heat transfer when the device operates continuously at elevated ambient temperatures.
For PCB implementation, place the decoupling capacitors close to the supply and ground pins, follow the manufacturer’s exposed-pad land pattern, and reserve programming and test access before fabrication. Confirm all peripheral multiplexing, voltage tolerances, and analog operating limits against the manufacturer datasheet for the exact package and grade.
This product page combines the exact manufacturer and distributor identification data, package-aware replacement analysis, technical comparisons, and practical integration guidance to support component selection, schematic review, and PCB planning.
جێگرەوەکانی جێگۆڕکێ بۆ PIC24F08KM102-I/ML — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC24F08KM102-I/ML (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە ADC, Package, Comparators, Core Architecture, DAC.
PIC24F08KM102-E/ML
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC24F08KM100-I/ML
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC24F08KM102-I/ML زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Microcontroller Type | 16-bit PIC XLP mixed-signal microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Flash Program Memory | 8 KB (2.75K × 24 words) |
| SRAM | 1 KB |
| Operating Voltage Range | 1.8 V to 5.5 V |
| ADC Resolution | 12 bits |
| ADC Architecture | Successive approximation |
| Integrated Operational Amplifiers | Integrated op amps |
| Comparator and CLC Peripherals | Integrated comparators and CLC |
| Program Memory Type | Flash |
| پاکێج | 28-pin QFN, 6 mm × 6 mm |
| Package Code | HVQCCN |
| Terminal Count | 28 pins |
| جۆری دامەزراندن | Surface mount |
| Temperature Grade | Industrial |
ڕێنمایی ڕێکخستنی پینی PIC24F08KM102-I/ML hvqccn
ڕێکخستنی پین بۆ PIC24F08KM102-I/ML (پاکێجی hvqccn). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ PIC24F08KM102-I/ML.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
PIC24F08KM102-I/ML گونجاوە بۆ 6 بەکارھێنانs: Battery-Powered Environmental Sensors, Compact Industrial Control Panels, Programmable Analog Signal Generation, Consumer Appliance Interfaces, Motor and Actuator Control, Low-Cost Test and Measurement Instruments.
Battery-Powered Environmental Sensors
PIC24F08KM102-I/ML fits battery-powered environmental sensors because it combines a low-power 16-bit PIC24 core with a 1.8 V to 5.5 V operating range. Its integrated 12-bit ADC can sample analog sensor signals without requiring a separate converter, while the 1 KB SRAM supports buffering and control logic. The 8 KB Flash stores acquisition routines, calibration coefficients, and communication handling. Configure unused peripherals and use an appropriate sleep mode during idle intervals to control average current. The 28-pin QFN also reduces board area compared with a leaded package, making the device suitable for compact probe and IoT sensor formats.
Compact Industrial Control Panels
PIC24F08KM102-I/ML is suitable for compact industrial control panels where a 32 MHz processor, 8 KB Flash, and integrated analog functions are sufficient. The 12-bit ADC can read potentiometers, resistive sensors, and divided process signals, while the DAC can generate control or reference voltages without an external converter. Comparators and CLC peripherals support threshold-based decisions and signal conditioning. Use the industrial-grade ordering code only where its specified environmental limits cover the installation conditions. The surface-mount 28-pin QFN also enables a smaller enclosure than a through-hole package while simplifying automated PCB assembly.
Programmable Analog Signal Generation
PIC24F08KM102-I/ML supports programmable analog output designs because it integrates a DAC together with operational amplifiers and a 12-bit ADC. A firmware-controlled loop can generate references, test excitations, or actuator commands, then use the ADC to close the loop around the resulting analog signal. This integration can reduce component count and board area in educational instruments, calibration equipment, and low-cost signal generators. The 1.8 V to 5.5 V supply range provides flexibility across low-voltage systems, although output range, settling behavior, and op-amp configuration must follow the manufacturer’s electrical limits.
Consumer Appliance Interfaces
PIC24F08KM102-I/ML can manage consumer appliance interfaces that combine touch, analog controls, status indication, and a low-cost embedded controller. The 12-bit ADC supports resistive sensing, the comparators and CLC can implement threshold detection, and the DAC can create analog control voltages. Its 32 MHz processing speed provides responsive digital control, while 8 KB Flash and 1 KB SRAM are adequate for compact user-interface and safety-check routines. The 28-pin QFN reduces PCB footprint, but exposed-pad layout, thermal performance, and EMC requirements should be reviewed before use in high-power or electrically noisy appliances.
Motor and Actuator Control
PIC24F08KM102-I/ML is applicable to small motor and actuator controllers that need local analog sensing in addition to digital control. Current, position, or temperature sensing can be connected to the 12-bit ADC, and the DAC or op amps can support analog command generation. The 32 MHz CPU provides useful control-loop bandwidth, while the PIC24 peripheral set reduces the need for separate analog devices. A practical design should include suitable driver transistors, protection, noise filtering, and a defined shutdown path. Confirm whether the actuator’s timing and fault-management requirements remain within the 8 KB Flash and 1 KB SRAM limits.
Low-Cost Test and Measurement Instruments
PIC24F08KM102-I/ML can serve as the control core of compact test and measurement instruments because its integrated 12-bit ADC, DAC, op amps, and comparators provide a compact mixed-signal front end. Firmware can perform measurements, apply calibration, generate test signals, and report results over a selected interface. The 32 MHz processor and 8 KB Flash are appropriate for basic rather than high-bandwidth instrumentation. For handheld equipment, operating from the 1.8 V to 5.5 V range simplifies rail planning, while the QFN package minimizes board area. Validate input bandwidth, accuracy, noise, and calibration stability against the application requirements.
داتای سەرچاوەی ئەندازیاری بۆ PIC24F08KM102-I/ML — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | PIC24F08KM102-E/ML | PIC24F08KM100-I/ML |
|---|---|---|---|
| Manufacturer | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-QFN (HVQCCN) | 28-QFN (HVQCCN) | 28-QFN (HVQCCN) |
| CPU Architecture | 16-bit PIC24 | 16-bit PIC24 | 16-bit PIC24 |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 8 KB (2.75K × 24 words) | 8 KB | 8 KB |
| SRAM | 1 KB | 1 KB | 1 KB |
| Operating Voltage Range | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V |
| ADC Resolution | 12 bits | 12 bits | 12 bits |
| Temperature-Grade Suffix | -I (industrial) | -E | -I (industrial) |
جیاکەرەوە سەرەکییەکان
- Integrated mixed-signal peripherals reduce external component count (بەراورد بەPIC24F08KM100-I/ML)
- Low-voltage mixed-signal integration in a 28-pin package (بەراورد بەPIC24F08KM102-E/ML)
- Dedicated Flash program memory supports firmware updates (بەراورد بەPIC24F08KM102-E/ML)
تێبینییەکانی دیزاین
Place the required supply-decoupling capacitors directly beside the device power and ground pins, and route the return current through the exposed-pad ground structure. Keep analog and digital return paths within the manufacturer’s recommended layout. Because the operating range extends from 1.8 V to 5.5 V, verify that every external sensor, communications interface, and programming connection remains within its own voltage limits at the selected rail voltage.
Follow the manufacturer’s 28-pin HVQCCN land pattern, including the exposed thermal pad, pad-to-mask ratio, and solder-mask definition. The exposed pad should connect to the intended ground plane with the specified via arrangement for thermal and electrical performance. Avoid placing tall components or coating over the pad unless the assembly process and land pattern permit it. Confirm pin orientation against the package drawing before releasing artwork.
Do not treat the -E/ML and -I/ML suffixes as interchangeable without checking environmental requirements. Their core KM102 identity and 28-QFN footprint are similar, but the grade suffix is the key ordering distinction. Also confirm pin multiplexing for the ADC, DAC, op amps, comparators, CLC, and programming functions before finalizing the schematic; adding a mixed-signal MCU does not make every peripheral available on every package pin.
The exposed thermal pad is an electrical connection as well as a heat-spreading feature. Provide the manufacturer-recommended copper area and thermal-via pattern to avoid creating a localized hot spot. Actual junction temperature depends on ambient temperature, switching activity, supply voltage, and board copper area. For continuously active designs, calculate thermal rise using the device-specific thermal parameters rather than relying only on the QFN package name.
زانیاری پابەندبوون
The exact -I/ML ordering code is identified as an industrial-grade 28-QFN device. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements require confirmation from the manufacturer’s current product documentation or declaration.