Microchip Technology

PIC24F08KM102-I/SS - 32MHz 16-Bit Low-Power MCU | Microchip

MPN: PIC24F08KM102-I/SS ✗ کۆتایی ژیان
1.8 V to 5.5 V Vdss 28-pin SSOP Package 32 MHz Speed 8 KB (2.75K x 24 bits) Memory
MOQ: 1 |

PIC24F08KM102-I/SS گشتی

The Microchip Technology PIC24F08KM102-I/SS is a 16-bit PIC XLP microcontroller rated up to 32 MHz, with 8 KB of Flash program memory, 1 KB of RAM, and 512 bytes of EEPROM in a 28-pin SSOP package. It also integrates a 12-bit ADC, DAC, comparators, configurable logic cells, and operational amplifiers for compact embedded control designs.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one chip. The PIC24F08KM102 belongs to the PIC24F family and the PIC XLP low-power product class. Its combination of digital control and analog peripherals allows one device to perform sensor acquisition, signal conditioning, actuator control, and communication while reducing the component count in an embedded system.

The principal features include a 16-bit architecture, a maximum clock frequency of 32 MHz, 8 KB of Flash memory organized as 2.75K by 24 bits, 1K by 8 bits of RAM, and 512 by 8 bits of EEPROM. Analog resources include a 12-bit ADC, an integrated DAC, comparators, and op amps. The device operates from 1.8 V to 5.5 V according to the Microchip product page, supporting both low-voltage and 5 V systems.

PIC24F devices provide flexible capture, compare, and PWM modules together with configurable logic cells. These peripherals can offload timing, waveform generation, and simple control tasks from the CPU. The integrated analog and logic resources are especially useful in small-format industrial controls, sensor nodes, consumer appliances, and compact instrumentation where PCB area and component count are important constraints.

Typical designs use the microcontroller for potentiometer and thermistor measurements, motor or valve timing, LED and display updates, and low-speed communications. The ADC measures analog inputs, while the comparators and op amps support threshold detection, signal conditioning, and local closed-loop functions. Firmware should also use the EEPROM for retained configuration or calibration values when nonvolatile storage is required.

When laying out the circuit, place decoupling capacitors close to the supply and ground pins and route high-current or switching signals away from sensitive analog inputs. Confirm the exact pin assignments, voltage limits, oscillator options, and peripheral multiplexing in the manufacturer datasheet before finalizing the PCB and firmware.

This product record combines the manufacturer specifications, package information, application guidance, comparison parameters, and sourcing details needed to evaluate the PIC24F08KM102-I/SS for compact low-power embedded-control designs.

جێگرەوەکانی جێگۆڕکێ بۆ PIC24F08KM102-I/SS — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC24F08KM102-I/SS (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, ADC, EEPROM, Operating Temperature, ADC Resolution.

Microchip Technology
EEPROM: 512 bytes
ADC Resolution: 12-bit
Microchip Technology
Package: 28-SSOP (5.30 mm)
ADC: 12-bit, multiple channels
Operating Temperature: -40C to +85C (Industrial)
Microchip Technology
ADC: 12-bit, up to 13 channels
Operating Temperature: -40C to +125C (E = Extended)
Microchip Technology
Package: 28-pin SSOP (5.30 mm body)
ADC: 12-bit, up to 12 channels
EEPROM: 512 B

هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.

داوای جێگرەوەکان بکە

PIC24F08KM102-I/SS زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type 16-bit PIC XLP microcontroller
Maximum CPU Frequency 32 MHz
Flash Program Memory 8 KB (2.75K x 24 bits)
Static RAM 1 KB (1K x 8 bits)
EEPROM 512 bytes (512 x 8 bits)
ADC Resolution 12 bits
Integrated DAC Yes
Integrated Op Amps Yes
Comparator Yes
Configurable Logic Cells Yes
Capture, Compare and PWM Modules Yes
Operating Voltage Range 1.8 V to 5.5 V
پاکێج 28-pin SSOP
جۆری دامەزراندن Surface mount
Processor Architecture 16-bit PIC core

ڕێنمایی ڕێکخستنی پینی PIC24F08KM102-I/SS 28-pin ssop

ڕێکخستنی پین بۆ PIC24F08KM102-I/SS (پاکێجی 28-pin ssop). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 28-pin ssop بۆ PIC24F08KM102-I/SS

هیچ داتای وردی پینئاوت بەردەست نییە بۆ PIC24F08KM102-I/SS.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

PIC24F08KM102-I/SS گونجاوە بۆ 6 بەکارھێنانs: Compact Sensor Conditioning, Small Motor and Actuator Control, Consumer Appliance Control, LED and Indicator Control, Portable Measurement Instrument, Low-Power Sensor Node.

🧩

Compact Sensor Conditioning

The PIC24F08KM102-I/SS fits compact sensor-conditioning designs because its 12-bit ADC can acquire analog measurements while comparators and integrated op amps support local thresholding and signal conditioning. A practical architecture routes a resistive or current-based sensor into the analog input network, uses the ADC for measurement, and applies a comparator for a fast switching output. The 16-bit core can filter data, apply calibration, and format the result. Its 1.8 V to 5.5 V operating range also allows the controller to operate from low-voltage sensor rails, while 8 KB of Flash accommodates control code and 512 bytes of EEPROM can retain calibration constants. Validate input ranges and analog-reference requirements against the manufacturer datasheet.

⚡

Small Motor and Actuator Control

The PIC24F08KM102-I/SS is appropriate for compact motor and actuator control where PWM generation, digital feedback, and analog monitoring must share one microcontroller. Its capture, compare, and PWM modules can produce the timing signals required for a small motor, valve, or positioning mechanism, while the 12-bit ADC can monitor current, position, or temperature information. The integrated comparators can support threshold-based protection and fast fault detection. Because the MCU does not directly replace a power driver, the design still needs an appropriate driver stage, flyback protection, and suitable current ratings. Program timing should include startup and fault behavior so the outputs remain in a defined state during initialization.

📱

Consumer Appliance Control

The PIC24F08KM102-I/SS can serve as the central controller in a small consumer appliance because it combines a 16-bit processor, EEPROM, ADC, DAC, comparators, and timing peripherals in one 28-pin package. The MCU can read controls and sensors, sequence motors or heaters through external circuitry, drive indicator LEDs, and retain user settings between power cycles. Its 1.8 V to 5.5 V range allows use with low-voltage control sections while a higher-voltage actuator stage remains separately protected. The 8 KB Flash limit calls for compact firmware, and EEPROM endurance should be considered if settings are rewritten frequently. A production design should also include brownout handling, watchdog behavior, and safe output states during reset.

💡

LED and Indicator Control

The PIC24F08KM102-I/SS can implement LED status, indication, and simple lighting effects using its timer and PWM resources. The 16-bit core can maintain timing sequences, respond to user input, and dim or flash one or more indicators while the integrated comparators and ADC support ambient-light or current feedback. The 1 KB RAM is sufficient for short display buffers and state variables, although larger display layouts may require an external controller. Keep high-current LED drive paths separate from sensitive analog inputs and ensure that each LED driver has the necessary current limiting. The 1.8 V to 5.5 V operating range allows direct compatibility with many low-voltage LED systems, subject to the selected LED forward voltage and MCU output-current limits.

🖥️

Portable Measurement Instrument

The PIC24F08KM102-I/SS is suitable for a portable measurement instrument that needs embedded signal acquisition without a separate analog controller. The 12-bit ADC provides the primary conversion function, while the DAC can generate a reference or test output and the op amps and comparators can support signal conditioning and threshold detection. EEPROM can preserve instrument settings or a calibration coefficient, and the 32 MHz 16-bit core can handle sampling, filtering, and display updates. A practical battery-powered design should use the low-voltage capability of the family and place the ADC input network away from switching nodes. Confirm whether noise performance, sample-and-hold behavior, and analog-input topology meet the measurement specification before using the MCU as the sole precision analog device.

🏭

Low-Power Sensor Node

The PIC24F08KM102-I/SS can form the control core of a compact low-power sensor node when the design must combine processing, analog measurement, and nonvolatile data storage. The microcontroller supports operation from 1.8 V to 5.5 V, uses 8 KB of Flash for application code, and includes 512 bytes of EEPROM for retained identifiers or calibration data. The ADC measures the primary sensor signal, while configurable logic cells can implement simple event handling and reduce repeated CPU activity. Sleep-mode use and peripheral shutdown can lower energy consumption, although actual battery life depends on the chosen system clock and firmware workload. For field deployments, use the EEPROM sparingly for frequently changing records and validate all sleep, wake, and brownout conditions in hardware.

کورتەی بەرهەمە پێشنیارکراوەکان

PIC24F08KM102 Base device identifier for the PIC24F KM family بەکارهێنراوە لە: Compact Sensor Conditioning, Small Motor and Actuator Control, Consumer Appliance Control, LED and Indicator Control, Portable Measurement Instrument, Low-Power Sensor Node PIC24F08KM102-I/SS Microchip Technology بەکارهێنراوە لە: Compact Sensor Conditioning, Small Motor and Actuator Control, Consumer Appliance Control, LED and Indicator Control, Portable Measurement Instrument, Low-Power Sensor Node
What is the PIC24F08KM102-I/SS?
The PIC24F08KM102-I/SS is a 16-bit PIC XLP microcontroller from Microchip Technology with a maximum operating frequency of 32 MHz. According to the Microchip product page and device listing, it combines 8 KB of Flash program memory, 1 KB of RAM, 512 bytes of EEPROM, a 12-bit ADC, a DAC, comparators, op amps, configurable logic cells, and capture, compare, and PWM peripherals in a 28-pin SSOP package.
What are the key specifications of PIC24F08KM102-I/SS that engineers should know?
The PIC24F08KM102-I/SS provides a 16-bit processor core operating up to 32 MHz, with 8 KB of Flash memory, 1 KB of RAM, and 512 bytes of EEPROM. According to the Microchip product page, the device supports operation from 1.8 V to 5.5 V and integrates a 12-bit ADC, DAC, comparators, op amps, configurable logic cells, and flexible capture, compare, and PWM modules in a 28-pin SSOP package.
Where can I download the PIC24F08KM102-I/SS datasheet PDF?
The official PIC24F08KM102-I/SS documentation is available through the Microchip Technology product page at https://www.microchip.com/en-us/product/PIC24F08KM102. The manufacturer product page links to technical documentation, device data, and the PIC24F08KM102-I/SS datasheet. Use the pin-description table and electrical-characteristics sections from that datasheet to establish the final footprint, voltage limits, and peripheral assignments.
Where can I find the PIC24F08KM102-I/SS pinout?
The PIC24F08KM102-I/SS pinout is found in the pin-description table of the Microchip PIC24F08KM102 datasheet. The device is packaged in a 28-pin SSOP, so its footprint corresponds to the ssop-28 library entry. Because the complete numbered signal list is not established here, use the manufacturer pin table to map power pins, I/O, analog inputs, oscillator pins, programming pins, and any no-connect positions before routing the board.
What is the power supply voltage range of PIC24F08KM102-I/SS?
The PIC24F08KM102-I/SS operates from 1.8 V to 5.5 V. The Microchip product page identifies the PIC24F KM family as a low-power microcontroller intended for 1.8 V to 5.5 V operation, and the device listing identifies the target as part of the PIC XLP 24F family. Confirm the exact operating mode, oscillator configuration, and peripheral-specific voltage constraints in the manufacturer datasheet.
How much memory does the PIC24F08KM102-I/SS have?
The PIC24F08KM102-I/SS contains 8 KB of Flash program memory, 1 KB of RAM, and 512 bytes of EEPROM. The Flash array is identified as 2.75K by 24 bits, while RAM and EEPROM are organized as 1K by 8 bits and 512 by 8 bits, respectively. These capacities allow compact embedded firmware, working variables, and retained configuration or calibration data.
What analog peripherals are integrated into PIC24F08KM102-I/SS?
The PIC24F08KM102-I/SS integrates a 12-bit ADC, a DAC, comparators, and operational amplifiers. According to the Microchip product page, these resources support compact designs from 1.8 V to 5.5 V without requiring separate analog ICs for every conversion or conditioning function. Exact channel counts, analog-reference options, and pin multiplexing must be confirmed in the manufacturer datasheet for the selected board configuration.
Is PIC24F08KM102-I/SS suitable for low-power embedded applications?
The PIC24F08KM102-I/SS is suitable for low-power embedded applications because it belongs to Microchip's PIC24F KM low-power family and supports a 1.8 V to 5.5 V operating range. Its 16-bit core, capture, compare, PWM modules, and configurable logic cells can handle timed and control functions efficiently. Final battery-life performance depends on the selected clock, sleep mode, peripheral configuration, and firmware duty cycle.
What can replace the PIC24F08KM102-I/SS?
A true drop-in replacement for the PIC24F08KM102-I/SS must use the same 28-pin SSOP footprint, preserve pin-to-pin signal compatibility, and retain comparable clock, memory, analog, and peripheral capabilities. The available cross-reference results identify the target family but do not establish five qualified same-footprint replacements. Use Microchip's cross-reference and product-selection tools to verify any proposed substitute before committing it to a PCB or firmware schedule.
Is PIC24F08KM102-I/SS the same as PIC24F08KM102-I/SO?
No. The PIC24F08KM102-I/SO is a related 28-pin device ordering code associated with a different package suffix, while the PIC24F08KM102-I/SS uses the SSOP package. Related family members can share much of their core and peripheral functionality, but package drawing, pin compatibility, programming, and production qualification must be checked explicitly. Treat a different package suffix as a non-drop-in option unless Microchip documents the compatibility.
When should I choose PIC24F08KM102-I/SS over a newer PIC24F device?
Choose the PIC24F08KM102-I/SS when an existing design specifically requires its 28-pin SSOP footprint, 16-bit core, 32 MHz maximum frequency, and integrated analog resources. The part is listed as obsolete, so new designs should normally compare current family members and software support. Retain it in an existing design only when lifecycle risk, availability, firmware compatibility, and qualification requirements have been reviewed.
Can PIC24F08KM102-I/SS be used for motor and industrial control?
The PIC24F08KM102-I/SS can support compact motor-control and industrial-control functions because it includes capture, compare, PWM, comparator, ADC, DAC, and configurable logic-cell resources. The device can generate timing signals, measure analog conditions, and implement supervisory functions in a small package. Suitable gate drivers, protection circuits, isolation, and safety-rated components remain necessary for higher-power equipment.
Where can I buy PIC24F08KM102-I/SS and what is its price?
Use the Request a Quote form on this page to inquire about PIC24F08KM102-I/SS availability, current pricing, lot requirements, and lead time. The target is listed as obsolete, so supply conditions can change as inventory is depleted. Request the exact ordering code PIC24F08KM102-I/SS and specify whether tape-and-reel or another permitted shipping format is required.
What is the lead time and stock status for PIC24F08KM102-I/SS?
Current stock and lead time for PIC24F08KM102-I/SS should be requested through the Request a Quote form on this page. The device is categorized as obsolete, so manufacturers and distributors may not offer standard production allocation. An inquiry should identify the required quantity, date code, package shipment format, and whether any remaining factory inventory may be used for maintenance or legacy production.
Is PIC24F08KM102-I/SS RoHS compliant and automotive qualified?
The RoHS and automotive-qualification status of the PIC24F08KM102-I/SS are not established by the product information shown here. The -I ordering code denotes the industrial temperature grade, but it does not by itself establish AEC-Q100 qualification. Obtain the current manufacturer declaration, material-compliance record, and qualification report for the exact ordering code before using the device in a regulated or automotive design.

داتای سەرچاوەی ئەندازیاری بۆ PIC24F08KM102-I/SS — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the PIC24F08KM102-I/SS only when maintaining an existing 28-pin SSOP design and the associated firmware are more important than obtaining a current-production MCU. It is a strong fit for compact controls that need a 16-bit core, 32 MHz performance, a 12-bit ADC, DAC, comparators, op amps, and a small amount of EEPROM without adding separate analog devices. The -I ordering code indicates an industrial-temperature variant, but the specific limits and qualification records must be checked. Because the target is obsolete, new product development should normally evaluate a current PIC24F family member with more memory, peripherals, or longevity. Do not select a related package suffix solely by similarity: a true replacement must match the SSOP-28 footprint, pin functions, electrical limits, programming model, and firmware requirements.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە
Brand Microchip Technology
Package 28-pin SSOP
Processor Architecture 16-bit PIC core
Maximum CPU Frequency 32 MHz
Flash Program Memory 8 KB (2.75K x 24 bits)
Static RAM 1 KB (1K x 8 bits)
EEPROM 512 bytes (512 x 8 bits)
ADC Resolution 12 bits
Operating Voltage Range 1.8 V to 5.5 V
Integrated Analog Resources ADC, DAC, comparators, and op amps
Lifecycle Status Obsolete

جیاکەرەوە سەرەکییەکان

  • Combines a 16-bit controller with multiple analog functions in one package (بەراورد بەPIC24F08KM102-I/SO)
  • On-chip memory supports standalone embedded control (بەراورد بەPIC24F08KM102-I/SO)
  • Supports low-voltage system designs (بەراورد بەPIC24F08KM102-I/SO)

تێبینییەکانی دیزاین

Decouple each required supply rail with capacitors placed directly beside the associated power and ground pins. Keep the analog and digital return paths under control, use a quiet analog reference when required by the ADC design, and follow the capacitor values and placement specified in the manufacturer datasheet. Because this device supports operation from 1.8 V to 5.5 V, verify the minimum operating voltage for the selected clock speed and every active peripheral rather than assuming that every mode is valid across the full range.

Route the 28-pin SSOP footprint exactly from the manufacturer mechanical drawing and use the pin-description table for every net assignment. Keep sensor inputs and comparator connections away from switching nodes and high-current return paths. The ADC, DAC, op amps, and comparators may share pins through device multiplexing, so software configuration must be reviewed against the physical board layout to avoid conflicts between analog functions and general-purpose I/O.

Do not treat the 32 MHz rating as an unconditional operating point across every supply voltage. Program the clock and peripheral configuration within the electrical operating conditions listed by Microchip, and confirm reset, brownout, watchdog, and programming-pin states. The device is obsolete, so also avoid unqualified substitutions: verify footprint, pin compatibility, flash organization, RAM, EEPROM, analog resources, and firmware assumptions before approving another part for an existing design.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Qualified
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 statement appears in the product information for this ordering code. The -I suffix denotes an industrial-temperature ordering option but does not establish AEC-Q100 qualification. Obtain current manufacturer compliance and qualification records for the exact part number.

داتا پشتڕاستکراوەتەوە لە: 2026-11-04 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

PIC24F08KM102-I/SS datasheet PIC24F08KM102-I/SS pinout PIC24F08KM102-I/SS datasheet pdf PIC24F08KM102-I/SS specifications PIC24F08KM102-I/SS equivalent PIC24F08KM102-I/SS replacement PIC24F08KM102-I/SS cross reference PIC24F08KM102-I/SS footprint PIC24F08KM102-I/SS price PIC24F08KM102-I/SS stock Microchip PIC24F08KM102-I/SS PIC24F08KM102 32MHz microcontroller PIC24F08KM102 SSOP-28 pinout PIC24F08KM102 application circuit

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology PIC24F08KM102-I/SS PIC24F08KM102 PIC24F08KM102-I/SO PIC24F PIC XLP 16-bit microcontroller embedded microcontroller semiconductor PIC core 12-bit ADC DAC comparator operational amplifier configurable logic cell capture compare PWM module Flash memory static RAM EEPROM SSOP-28 SSOP package family surface mount SMD 1.8 V to 5.5 V operation low-power embedded control
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ