PIC24F08KM202-I/SO - 16-Bit 32MHz XLP MCU | Microchip
MPN: PIC24F08KM202-I/SO ✓ چالاکPIC24F08KM202-I/SO گشتی
A PIC XLP microcontroller is a low-power 16-bit microcontroller family that combines a compact instruction set with integrated analog and timing resources. Within the product hierarchy, the PIC24F08KM202 belongs to the PIC24F 16-bit MCU family, the XLP low-power platform, and the broader category of embedded microcontrollers used for control, sensing, and communication tasks.
The device provides a 12-bit ADC, an 8-bit DAC, operational amplifiers, flexible Capture/Compare/PWM modules, and Configurable Logic Cells according to the Microchip product page. Its 8 KB Flash configuration is organized as 2.75K × 24 words, while the distributor catalog identifies 2 KB of RAM. These resources consolidate analog conversion, signal conditioning, and digital control into a single 28-pin device.
The 32 MHz processing rate supports responsive control loops and time-sensitive peripheral operation. Integrating the ADC, DAC, comparators or operational amplifiers, and configurable logic also reduces external component count in sensor, actuator, and industrial-control boards. The 28-SOIC package provides a familiar gull-wing footprint with a stated 0.1 inch lead pitch.
Typical uses include industrial condition monitoring, low-power sensor nodes, motor and actuator control, compact data-acquisition modules, and embedded instrumentation. Because the MCU combines digital control with on-chip analog functions, it is particularly suitable for systems that convert an analog input into a control action without using separate analog and processing devices.
When laying out a board, reserve decoupling close to each supply pin and route analog inputs away from switching nodes and high-current outputs. Confirm that the selected oscillator configuration, peripheral assignments, and firmware meet the timing requirements of the intended control loop. The manufacturer datasheet and the product page provide the authoritative pin, electrical, and programming details for the final hardware design.
This page combines the verified device characteristics with application guidance, engineering design notes, package information, and same-family replacement analysis. It is intended to help designers evaluate the PIC24F08KM202-I/SO quickly while keeping the final component decision traceable to manufacturer documentation.
جێگرەوەکانی جێگۆڕکێ بۆ PIC24F08KM202-I/SO — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC24F08KM202-I/SO (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, ADC, Operating Temperature, Program Memory (Flash), DAC.
PIC24F08KM202-E/SO
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC24F08KM204-I/SO
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC24F08KM206-I/SO
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC24F08KM204-E/SO
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC24F08KM206-E/SO
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC24F08KM202-I/SO زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 16-bit microcontroller |
| Product Series | PIC XLP 24F |
| زۆرترین فرێکوێنسیی کاتژمێر | 32 MHz |
| Flash Memory | 8 KB (2.75K x 24 words) |
| RAM | 2 KB |
| ADC Resolution | 12-bit |
| DAC Resolution | 8-bit |
| Integrated Op Amps | Yes |
| Capture/Compare/PWM Modules | Yes, flexible configuration |
| Configurable Logic Cells | Yes |
| پاکێج | 28-SOIC |
| Lead Pitch | 0.1 inch (2.54 mm) |
| جۆری دامەزراندن | Surface mount |
| Temperature Grade | Industrial |
| پلەی گەرمیی کارکردن | -40°C to +85°C |
| Programming Memory Type | Flash |
ڕێنمایی ڕێکخستنی پینی PIC24F08KM202-I/SO 28-soic
ڕێکخستنی پین بۆ PIC24F08KM202-I/SO (پاکێجی 28-soic). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ PIC24F08KM202-I/SO.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
PIC24F08KM202-I/SO گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor and Condition Monitoring, Compact Data-Acquisition Module, Low-Power Actuator Control, Battery-Powered Measurement Node, Motor and Valve Control, Embedded Test and Measurement Front End.
Industrial Sensor and Condition Monitoring
PIC24F08KM202-I/SO suits industrial sensor nodes that must convert analog measurements, apply filtering or threshold logic, and report a local state through a serial interface. Its 12-bit ADC, 32 MHz processing rate, and 2 KB of RAM provide headroom for sampling, scaling, and debounce routines without an external processor. The integrated analog resources also allow a compact design to compare sensor outputs or condition signals internally. For a field deployment, specify the -40°C to +85°C grade, isolate high-current wiring from analog inputs, and validate the sampling schedule against the required control and reporting latency.
پێشنیارکراو
Compact Data-Acquisition Module
PIC24F08KM202-I/SO can serve as the controller for a compact data-acquisition module that samples analog inputs and retains short acquisition bursts in its 2 KB RAM. The 32 MHz core supports timing routines and peripheral coordination, while the 12-bit ADC and 8-bit DAC support excitation, measurement, and output functions. Designers can use the configurable logic for simple signal conditioning without loading the main instruction stream. When laying out the module, provide local supply decoupling, route the analog return cleanly, and confirm acquisition-buffer and serial-transfer timing in the manufacturer documentation.
پێشنیارکراو
Low-Power Actuator Control
PIC24F08KM202-I/SO fits actuator-control boards that need fast I/O transitions, timed pulse generation, and local analog feedback. Its flexible Capture/Compare/PWM modules support period and duty-cycle generation, while the 32 MHz core allows deterministic control of the surrounding sequence. The integrated operational amplifiers can assist with signal conditioning, and the 8-bit DAC can generate a simple reference or bias level. Keep switching outputs away from sensitive feedback nets and validate timing against the actuator's mechanical and electrical requirements before releasing the firmware.
پێشنیارکراو
Battery-Powered Measurement Node
PIC24F08KM202-I/SO is appropriate for battery-powered measurement nodes because it combines the PIC XLP low-power architecture with integrated analog functions. The controller can sleep between measurements, wake for an ADC conversion, process the result, and return to a low-energy state. On-chip peripherals reduce the need for separate analog components, which helps conserve board area and energy. Establish a realistic duty-cycle budget using the manufacturer sleep and active current characteristics, account for sensor self-heating, and isolate the radio or communications section from the analog front end.
پێشنیارکراو
Motor and Valve Control
PIC24F08KM202-I/SO can control simple motors, valves, or relays where the 32 MHz core and configurable timing peripherals are sufficient for the required loop rate. The ADC supports current, position, or pressure feedback, while PWM-capable peripherals produce the actuator command signal. Configurable logic can assist with trip functions or simple logic operations around the main control loop. Validate current limits, inductive energy handling, and protection components independently, and use the manufacturer timing resources to confirm that the PWM resolution and update latency satisfy the mechanical requirement.
پێشنیارکراو
Embedded Test and Measurement Front End
PIC24F08KM202-I/SO works as the control front end for compact test and measurement equipment that combines stimulus generation and response capture. The 8-bit DAC can create a basic test level, the 12-bit ADC can capture the resulting response, and the 32 MHz core can coordinate timing or digital analysis. Integrated op-amps and configurable logic reduce the external component count in low-channel instruments. Calibrate the analog path, specify the required input bandwidth, and separate sensitive measurement nodes from digital output edges to preserve usable signal integrity.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ PIC24F08KM202-I/SO — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | PIC24F08KM202-E/SO | PIC24F08KM204-I/SO | PIC24F08KM206-I/SO | PIC24F08KM204-E/SO | PIC24F08KM206-E/SO |
|---|---|---|---|---|---|---|
| Package | 28-SOIC | 28-SOIC | 28-SOIC | 28-SOIC | 28-SOIC | 28-SOIC |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Processor Architecture | 16-bit PIC | 16-bit PIC | 16-bit PIC | 16-bit PIC | 16-bit PIC | 16-bit PIC |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 8 KB (2.75K x 24 words) | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| Temperature Grade | Industrial, -40°C to +85°C | Extended, -40°C to +125°C | Industrial, -40°C to +85°C | Industrial, -40°C to +85°C | Extended, -40°C to +125°C | Extended, -40°C to +125°C |
جیاکەرەوە سەرەکییەکان
- Combines a 32 MHz 16-bit core with integrated analog conversion (بەراورد بەPIC24F08KM204-I/SO)
- Factory matching between program Flash organization and the PIC24F08KM202 platform (بەراورد بەPIC24F08KM206-I/SO)
- Direct 28-SOIC same-footprint upgrade path for extended-temperature designs (بەراورد بەPIC24F08KM202-E/SO)
- Industrial temperature grade is sufficient for standard commercial and industrial equipment (بەراورد بەPIC24F08KM202-E/SO)
تێبینییەکانی دیزاین
Place the required supply bypass capacitors directly beside the VDD and VSS pins and keep the return path short. The mixed analog and digital architecture makes supply stability important during ADC conversion and DAC output changes. Review the manufacturer datasheet for the recommended capacitor values, allowable ESR or voltage-rating constraints, and any startup requirements before releasing the PCB layout.
Separate analog inputs and references from PWM, relay, and communication outputs. Route sensitive traces over a continuous ground plane, keep the analog and digital ground strategy consistent with the device recommendation, and avoid placing high-current return paths beneath the ADC network. The integrated operational amplifiers do not remove the need for careful analog layout because PCB coupling can still dominate the measurement error.
Do not treat every PIC24F08KM2xx variant as an automatic firmware-compatible substitute. Peripheral assignment, pin multiplexing, and application configuration must be checked in the device-specific headers and configuration settings. Before using a KM204 or KM206 alternative, compare the exact pin-description table, ADC channel allocation, comparator or DAC resources, and interrupt mappings against the populated PCB footprint.
Confirm clock source, timing configuration, and peripheral output states during reset because these determine the initial behavior of a mixed-signal control board. Use the pin-description table to identify functions that are multiplexed onto alternate pins, and validate the boot sequence in hardware with the production oscillator and load conditions. This check is especially important where a multifunction pin drives an external network during startup.
زانیاری پابەندبوون
The device is identified as an industrial-temperature 28-SOIC PIC XLP microcontroller. Compliance statements require confirmation from the manufacturer product page or the relevant compliance documentation.