Microchip Technology

PIC24F16KA302-E/ML - 16-Bit 32MHz XLP Microcontroller | Microchip

MPN: PIC24F16KA302-E/ML ✓ چالاک
28-QFN (6 x 6 mm) Package 32 MHz Speed 16 KB (5.5K x 24 words) Memory
MOQ: 1 |

PIC24F16KA302-E/ML گشتی

The Microchip Technology PIC24F16KA302-E/ML is a 16-bit embedded microcontroller with 16 KB of Flash program memory, 2 KB of RAM, an 18-pin I/O arrangement, and operation up to 32 MHz in a 28-QFN 6 x 6 mm package. It combines a 12-bit ADC, capacitive touch measurement hardware, and XLP low-power features designed for battery-powered and power-constrained products.

A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals such as timers, analog converters, communication interfaces, and GPIO on one integrated circuit. The PIC24F16KA302 belongs to Microchip's PIC24F general-purpose microcontroller family and supports embedded control tasks requiring deterministic peripheral operation, flexible I/O, and low-power management. Its 16-bit architecture provides efficient handling of many embedded workloads while retaining a broad set of dedicated peripherals.

The device provides 16 MIPS operation at a 32 MHz maximum clock, 16 KB of Flash memory organized as 5.5K x 24 words, and 2 KB of data RAM. Its 18 available I/O pins can be assigned to digital inputs, outputs, and mixed peripheral functions according to the application. A 12-bit ADC supports analog measurement, while CTMU provides a capacitive touch measurement resource for controls and proximity-oriented interfaces.

XLP technology is central to the PIC24F16KA302-E/ML's low-power positioning. The manufacturer identifies Deep Sleep operation and peripherals including DSBOR, DSWDT, and RTCC as capable of operating in low-energy states. These features are useful in systems that spend substantial time idle, such as battery-powered sensors, portable instruments, and connected embedded products. Design decisions should consider active-current reduction, sleep-mode duration, and the latency required when waking for new measurements.

The 28-QFN surface-mount package supports compact PCB layouts, but its exposed-thermal-pad and fine-pitch construction require careful assembly and layout. Decoupling capacitance must be placed close to supply pins, and programming, clocking, analog grounding, and low-power behavior should be validated across the intended voltage and temperature range.

Typical uses include low-power sensor nodes, capacitive touch controls, compact battery-powered instruments, industrial monitoring modules, and embedded control boards that need 12-bit analog measurement. The PIC24F16KA302-E/ML is particularly appropriate when a compact MCU, low-power Deep Sleep behavior, and moderate on-chip memory are more important than a high-pin-count interface or large application memory budget.

This product page combines the manufacturer's core device characteristics with practical procurement guidance, verified drop-in alternatives, package considerations, and engineering-focused selection notes. It helps distinguish the E/ML temperature-grade variant from related -I/ML and -I/SO devices while preserving the critical same-package requirement for PCB replacement decisions.

جێگرەوەکانی جێگۆڕکێ بۆ PIC24F16KA302-E/ML — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC24F16KA302-E/ML (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, ADC, Core Architecture, EEPROM, Timers.

Microchip Technology
Package: 28-pin QFN (6x6 mm)
ADC: 12-bit, up to 16 channels
Core Architecture: PIC24F 16-bit modified Harvard
Microchip Technology
Package: 28-QFN (6x6 mm) with exposed pad
ADC: 12-bit with CTMU
Core Architecture: PIC24F 16-bit modified Harvard
Microchip Technology
Package: 28-pin QFN (6x6 mm) with exposed pad
ADC: 12-bit, up to 13 channels
Core Architecture: PIC24F 16-bit RISC (modified Harvard)

PIC24F16KA302-I/ML

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 28-QFN (6 x 6 mm)
PIC24F 16-bit modified Harvard · 32 MHz (16 MIPS) · 16 KB (5.5K x 24 instructions) · 2 KB · 512 B · 1.8 V to 3.6 V · -40C to +85C (Industrial) · 17 (varies by package)

پەیوەندی بۆ نرخ

بینینی داتاشیت →

PIC24F16KA302-E/ML زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type 16-bit Flash microcontroller
زۆرترین فرێکوێنسیی کاتژمێر 32 MHz
Instruction Throughput 16 MIPS
Program Memory 16 KB (5.5K x 24 words)
Data RAM 2 KB
Number of I/O Pins 18 pins
ADC Resolution 12 bits
Capacitive Touch Peripheral CTMU
پاکێج 28-QFN (6 x 6 mm)
جۆری دامەزراندن Surface mount
Low-Power Technology PIC XLP
Deep Sleep Peripherals DSBOR, DSWDT, and RTCC
EEPROM 512 bytes

ڕێنمایی ڕێکخستنی پینی PIC24F16KA302-E/ML 28-qfn (6 x 6 mm)

ڕێکخستنی پین بۆ PIC24F16KA302-E/ML (پاکێجی 28-qfn (6 x 6 mm)). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 28-qfn (6 x 6 mm) بۆ PIC24F16KA302-E/ML

هیچ داتای وردی پینئاوت بەردەست نییە بۆ PIC24F16KA302-E/ML.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

PIC24F16KA302-E/ML گونجاوە بۆ 6 بەکارھێنانs: Battery-Powered Sensor Nodes, Capacitive Touch Control Interfaces, Compact Industrial Monitoring Modules, Portable Measurement Instruments, Low-Power Environmental Sensors, Embedded Access and Control Panels.

🔋

Battery-Powered Sensor Nodes

The PIC24F16KA302-E/ML fits compact sensor nodes because it combines a 32 MHz 16-bit core, 2 KB RAM, 18 I/O pins, and PIC XLP low-power features. Its 16 KB Flash provides room for acquisition logic, filtering, calibration, and low-power state management without requiring a larger microcontroller. DSBOR, DSWDT, and RTCC operation in Deep Sleep can support duty-cycled measurements, although battery life depends on wake frequency, active duration, sensor load, and regulator efficiency.

🖱️

Capacitive Touch Control Interfaces

The PIC24F16KA302-E/ML supports capacitive touch controls through its CTMU peripheral and 12-bit ADC. At a maximum clock of 32 MHz, the device can scan touch inputs, apply filtering, update indicators, and maintain low-power states. Eighteen I/O pins also leave room for display control, status LEDs, communications, and shared interface signals. PCB implementation should account for pad geometry, guard traces, shielding, and calibration because sensitivity depends on electrode size and environmental coupling.

🏭

Compact Industrial Monitoring Modules

The PIC24F16KA302-E/ML is suitable for industrial monitoring modules that combine analog sensing, local control, and low-power operation. Its 12-bit ADC supports sensor measurement, while 18 I/O pins provide flexibility for digital inputs, alarm outputs, status indicators, and serial communication. The 16-bit core executes at up to 16 MIPS, and PIC XLP Deep Sleep behavior helps reduce consumption during long measurement intervals. The E-grade ordering option should be checked against the module's ambient-temperature requirements.

🔧

Portable Measurement Instruments

A handheld or portable instrument can use the PIC24F16KA302-E/ML for control, signal conditioning, and user interaction without relying on a high-pin-count MCU. The device provides 16 KB Flash, 2 KB RAM, 18 I/O pins, a 12-bit ADC, and CTMU in a compact 28-QFN package. Its 32 MHz maximum clock supports responsive control loops, while XLP modes are useful between operator actions or measurements. Analog layout, reference selection, calibration, and battery regulation remain critical to accurate results.

🌡️

Low-Power Environmental Sensors

The PIC24F16KA302-E/ML works well in environmental sensors that periodically sample analog inputs and remain asleep between readings. Its 12-bit ADC, 32 MHz processing capability, and CTMU allow a single MCU to handle sensing, touch activation, and local logic. PIC XLP peripherals including DSBOR, DSWDT, and RTCC support low-energy operation in Deep Sleep. To maximize battery life, minimize active-time conversion overhead, disable unused peripherals, and use the manufacturer's recommended clock and power-management sequence.

🔐

Embedded Access and Control Panels

PIC24F16KA302-E/ML can serve as the controller for compact access panels, keypads, and human-interface modules. CTMU supports capacitive buttons, the 12-bit ADC can monitor analog controls, and 18 I/O pins provide connections for indicators, relays, or communications. A 16-bit core running at up to 32 MHz gives adequate control bandwidth without a larger package. Firmware should include debouncing, event filtering, lockout behavior, and safe outputs for actuator or door-control functions.

کورتەی بەرهەمە پێشنیارکراوەکان

PIC24F16KA302 Base family device بەکارهێنراوە لە: Battery-Powered Sensor Nodes, Capacitive Touch Control Interfaces, Compact Industrial Monitoring Modules, Portable Measurement Instruments, Low-Power Environmental Sensors, Embedded Access and Control Panels PIC24F16KA302-I/ML Microchip Technology بەکارهێنراوە لە: Battery-Powered Sensor Nodes, Capacitive Touch Control Interfaces, Compact Industrial Monitoring Modules, Portable Measurement Instruments, Low-Power Environmental Sensors, Embedded Access and Control Panels
What are the key specifications of PIC24F16KA302-E/ML that engineers should know?
The PIC24F16KA302-E/ML combines a 16-bit core, 32 MHz maximum clock, 16 MIPS instruction throughput, 16 KB of Flash memory, 2 KB of RAM, and 18 I/O pins. It also includes a 12-bit ADC and CTMU capacitive-touch support in a 28-QFN 6 x 6 mm package. According to the Microchip product page, the device is built around PIC XLP low-power technology for battery-powered and power-constrained applications.
What is the operating voltage of PIC24F16KA302-E/ML?
The PIC24F16KA302-E/ML supports a 32 MHz maximum clock and includes 16 KB of Flash program memory, 2 KB of RAM, and a 12-bit ADC. The manufacturer product page identifies the PIC24F16KA302 family as a 16-bit XLP microcontroller, while the exact operating-voltage limits must be taken from the PIC24F16KA302 manufacturer datasheet before designing the power supply or input pins.
What is the operating temperature range of PIC24F16KA302-E/ML?
The E/ML ordering suffix identifies the extended-commercial-grade and QFN package option within Microchip's PIC24F16KA302 family. The exact minimum and maximum junction or ambient temperature limits are not shown on the product-page summary, so consult the manufacturer datasheet's temperature tables before using the device in industrial, automotive-adjacent, or extended-temperature equipment.
Where can I download the PIC24F16KA302-E/ML datasheet PDF?
The PIC24F16KA302-E/ML datasheet is available through the official Microchip PIC24F16KA302 product page at https://www.microchip.com/en-us/product/PIC24F16KA302. The associated family document is titled for 20-, 28-, 44-, and 48-pin general-purpose 16-bit Flash microcontrollers with XLP technology. Use the pin-description and electrical-characteristics tables for the exact package and temperature grade.
Where can I find the PIC24F16KA302-E/ML pinout?
The PIC24F16KA302-E/ML uses a 28-QFN package, and its authoritative pin assignments appear in the pin-description table of the Microchip PIC24F16KA302 manufacturer datasheet. The pinout cannot be reconstructed safely from the distributor summary because it does not list every QFN terminal. Use that table to map VDD, VSS, programming, clock, ADC, CTMU, and general-purpose I/O functions before PCB routing.
Can PIC24F16KA302-I/ML replace PIC24F16KA302-E/ML as a drop-in replacement?
Yes, PIC24F16KA302-I/ML is the closest identified drop-in option because it retains the same 28-QFN 6 x 6 mm package and the same 16 KB Flash, 2 KB RAM, 32 MHz clock, 18 I/O, 12-bit ADC, and CTMU core configuration. The 0% core-parameter difference supports direct PCB reuse, but the I and E suffixes denote different temperature-grade qualifications, so verify the required environmental range.
What is the best drop-in replacement for PIC24F16KA302-E/ML?
PIC24F16KA302-I/ML is the best identified drop-in replacement because it uses the same 28-QFN 6 x 6 mm package and preserves the device's 16 KB Flash, 2 KB RAM, 32 MHz clock, 18 I/O pins, 12-bit ADC, and CTMU configuration. The distinction is temperature grade rather than core functionality. Confirm the required ambient range and inspect the manufacturer datasheet's ordering information before production substitution.
What can replace PIC24F16KA302-E/ML without changing the PCB?
PIC24F16KA302-I/ML is the identified PCB-compatible replacement because both devices use the 28-QFN 6 x 6 mm package and retain identical core memory, clock, I/O, and analog-peripheral counts. No same-package replacement with a meaningfully different memory configuration was confirmed. Because replacement qualification depends on temperature grade and exact exposed-pad layout, compare the complete pin tables and land pattern before approving the substitution.
Is PIC24F16KA302-I/ML the same as PIC24F16KA302-E/ML?
PIC24F16KA302-I/ML and PIC24F16KA302-E/ML share the same 28-QFN package and core electrical configuration, including 16 KB Flash, 2 KB RAM, 32 MHz operation, 18 I/O pins, and a 12-bit ADC. They are not identical in ordering grade: the E and I suffixes distinguish their temperature qualifications. Select the grade that matches the product's environmental requirements rather than treating the suffix difference as inconsequential.
When should I choose PIC24F16KA302-E/ML over PIC24F16KA302-I/ML?
Choose PIC24F16KA302-E/ML when the product requires the E-grade qualification and does not need the broader temperature qualification associated with PIC24F16KA302-I/ML. Their core resources are otherwise equivalent, so selection should focus on operating-temperature requirements, qualification documentation, and lifecycle availability rather than processing speed or memory. The manufacturer datasheet should determine which grade suits the final enclosure, ambient range, and test plan.
Is PIC24F16KA302-E/ML suitable for battery-powered applications?
The PIC24F16KA302-E/ML is suitable for many battery-powered designs because Microchip positions the PIC24F16KA302 family around PIC XLP low-power operation. The manufacturer specifically identifies DSBOR, DSWDT, and RTCC operation in Deep Sleep as contributors to low-power performance. Actual battery life still depends on the selected mode, sensor duty cycle, regulator efficiency, wake conditions, and average processing time.
What design considerations matter for the PIC24F16KA302-E/ML power supply?
The PIC24F16KA302-E/ML should be powered from a source that satisfies the voltage and current limits in the Microchip PIC24F16KA302 manufacturer datasheet. Place required decoupling capacitors directly beside the appropriate VDD and VSS pins, keep analog and digital return paths controlled, and validate startup and brownout behavior with the complete load. Exact capacitor values and voltage tolerances must follow the datasheet and reference design.
How does PIC24F16KA302-E/ML support capacitive touch controls?
The PIC24F16KA302-E/ML includes CTMU, a capacitive touch measurement unit that can support touch-sensitive user interfaces in low-power embedded products. It works with the MCU's ADC and timer resources to measure changes in capacitance associated with a touch event. The 12-bit ADC, CTMU, 32 MHz clock, and XLP sleep modes make the device suitable for responsive controls that must also conserve battery energy.
Where can I buy PIC24F16KA302-E/ML online?
Use the Request a Quote form on this page to request the PIC24F16KA302-E/ML, current lead time, stock status, and authorized-channel purchasing options. The part is a Microchip Technology 16-bit, 32 MHz XLP microcontroller in a 28-QFN package. Request the exact -E/ML ordering code when asking for a quotation so the proposal reflects the correct temperature grade and package.
What is the price of PIC24F16KA302-E/ML?
Use the Request a Quote form on this page for the current price of PIC24F16KA302-E/ML. Pricing can vary with order quantity, inventory position, date code, and authorized supply channel. The structured price area updates as commercial data changes, while the quote request provides a direct way to confirm the exact package suffix, quantity, lead time, and shipment configuration.
What is the lead time and stock status of PIC24F16KA302-E/ML?
Request the current lead time and stock status through the Request a Quote form on this page. The device is identified as Microchip Technology's PIC24F16KA302-E/ML in a 28-QFN 6 x 6 mm package, but current inventory and manufacturing allocation should be confirmed for the quantity and date code needed. Include a production forecast when requesting a quotation to obtain the most useful scheduling information.
Is there a cross-brand drop-in equivalent for PIC24F16KA302-E/ML?
No cross-manufacturer drop-in equivalent was confirmed for the PIC24F16KA302-E/ML. Microchip's PIC24F16KA302-I/ML is the identified same-package alternative, while the available cross-reference results require verification against complete pin, electrical, timing, peripheral, and qualification requirements. Use the Request a Quote form on this page to discuss approved sourcing options rather than assuming that a similarly specified MCU is pin-to-pin compatible.

داتای سەرچاوەی ئەندازیاری بۆ PIC24F16KA302-E/ML — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose PIC24F16KA302-E/ML when the design requires the E temperature-grade option, a 16-bit embedded controller, 16 KB Flash, 2 KB RAM, and PIC XLP low-power operation in a 28-QFN package. PIC24F16KA302-I/ML is the preferred alternative when its temperature qualification better matches the product environment while preserving the same package and core electrical resources. Do not choose -I/SO, -I/SP, -E/SO, or -E/SP for a drop-in replacement because those package codes require different PCB land patterns. The device is best suited to compact sensor nodes, capacitive touch interfaces, portable instruments, and monitoring modules where 12-bit analog measurement and Deep Sleep capability are more important than large memory, high pin count, or a high-speed external interface.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە PIC24F16KA302-I/ML
Brand Microchip Technology Microchip Technology
Package 28-QFN (6 x 6 mm) 28-QFN (6 x 6 mm)
Architecture 16-bit 16-bit
Maximum Clock Frequency 32 MHz 32 MHz
Instruction Throughput 16 MIPS 16 MIPS
Flash Memory 16 KB 16 KB
RAM 2 KB 2 KB
Number of I/O Pins 18 18
ADC Resolution 12 bits 12 bits
EEPROM 512 bytes 512 bytes
Capacitive Touch Support CTMU CTMU
Low-Power Features PIC XLP with DSBOR, DSWDT, and RTCC in Deep Sleep PIC XLP with DSBOR, DSWDT, and RTCC in Deep Sleep

جیاکەرەوە سەرەکییەکان

  • Same-package qualification alternative (بەراورد بەPIC24F16KA302-I/ML)
  • Integrated low-power control resources (بەراورد بەPIC24F16KA302-I/ML)
  • Analog and touch resources in a compact package (بەراورد بەPIC24F16KA302-I/ML)

تێبینییەکانی دیزاین

Use the manufacturer's XLP sequence to place the PIC24F16KA302-E/ML into its lowest-current state after measurement or user interaction. DSBOR, DSWDT, and RTCC can remain active in Deep Sleep according to the product-page description. Validate wake-up latency and active current over the full duty cycle rather than estimating battery life from sleep current alone, because sensor conversion, communications, and regulator losses may dominate the average load.

Place the required supply and decoupling capacitors close to the corresponding 28-QFN VDD and VSS terminals, and provide a low-impedance return path beneath the device where the land pattern permits. The 6 x 6 mm QFN has fine-pitch leads and an exposed thermal pad, so inspect the manufacturer's assembly and land-pattern guidance before fabrication. Verify pad dimensions, solder mask, paste coverage, and the exposed-pad connection in the PCB library rather than relying on a generic QFN footprint.

Keep CTMU touch electrodes and their sensitive routing away from noisy sources, high-current switching paths, and long unprotected analog traces. Use a stable ground reference and follow the manufacturer's guidance for guard or shield structures. Because the MCU also contains a 12-bit ADC, separate analog and digital return currents where possible and test measurement accuracy across touch, sleep, and wake transitions rather than only under quiescent conditions.

Do not substitute PIC24F16KA302-I/SO for the -E/ML device as a literal drop-in part: the -SO ordering option uses a different package and therefore a different PCB footprint. Similarly, do not treat any MCU with similar clock speed as interchangeable without checking every power, programming, analog, and peripheral pin. For the same-footprint choice, verify the temperature-grade requirement and the complete manufacturer pin table before releasing a substitution to production.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The product-page and distributor summaries do not state the requested compliance results. Check the manufacturer product documentation and current material-declaration records for the exact ordering code.

داتا پشتڕاستکراوەتەوە لە: 2026-11-04 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

PIC24F16KA302-E/ML datasheet PIC24F16KA302-E/ML pinout PIC24F16KA302-E/ML datasheet pdf PIC24F16KA302-E/ML replacement PIC24F16KA302-E/ML equivalent PIC24F16KA302-E/ML price PIC24F16KA302-E/ML stock PIC24F16KA302-E/ML vs PIC24F16KA302-I/ML PIC24F16KA302-E/ML QFN footprint Microchip PIC24F16KA302-E/ML PIC24F16KA302-E/ML low power PIC24F16KA302-E/ML capacitive touch

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology PIC24F16KA302-E/ML PIC24F16KA302-I/ML PIC24F16KA302 16-bit microcontroller Flash microcontroller embedded microcontroller microcontroller unit MCU PIC24F family PIC XLP XLP low-power technology Deep Sleep DSBOR DSWDT RTCC CTMU capacitive touch measurement unit 12-bit ADC 16 MIPS 32 MHz 16 KB Flash memory 2 KB RAM 18 I/O pins 28-QFN 6 x 6 mm package
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ