Microchip Technology

PIC24F32KA304-E/MV - 16-Bit 32MHz XLP Microcontroller | Microchip

MPN: PIC24F32KA304-E/MV ✓ چالاک
48-UQFN (6 × 6 mm) Package 32 MHz Speed 32 KB (11K × 24 words) Memory
MOQ: 1 |

PIC24F32KA304-E/MV گشتی

The Microchip Technology PIC24F32KA304-E/MV is a 16-bit flash microcontroller designed for power-constrained and battery-powered systems. It operates at up to 32 MHz, provides 32 KB of program Flash memory organized as 11K × 24 words, and is packaged in a 48-pin UQFN measuring 6 × 6 mm. The MCU belongs to the PIC24F32KA304 family and combines XLP low-power design with peripherals that can operate during Deep Sleep mode.

A microcontroller is a programmable integrated circuit that combines a processor core, nonvolatile program memory, data memory, timers, communication interfaces, and analog or control peripherals on one device. The PIC24 architecture extends Microchip's RISC portfolio with a 16-bit instruction set and peripheral-rich platform. In an embedded system, the controller executes firmware, reads sensors, evaluates control conditions, drives displays or actuators, and coordinates power-management functions.

The PIC24F32KA304-E/MV emphasizes low-power operation through XLP technology. Its notable power-related peripherals include DSBOR, DSWDT, and RTCC, which can run in Deep Sleep mode according to the manufacturer product description. This feature set is particularly useful when average standby power matters more than continuous processing performance. The exact current consumption figures shall be selected from the PIC24F32KA304 family data sheet for the relevant operating mode and voltage.

Program memory capacity is 32 KB, or 11K × 24 words, while the family listing identifies 2 KB of RAM, 512 bytes of EEPROM, and 12-bit ADC capability. The processor reaches 32 MHz and delivers up to 16 MIPS. CTMU support adds a charge-timing measurement peripheral for capacitive sensing and related measurement tasks. These resources allow one device to handle control logic, analog measurement, communications, and low-power supervision.

Typical applications include battery-powered health monitors, blood-pressure equipment, portable industrial instruments, connected sensors, compact control panels, and low-power embedded products. The 48-UQFN package supports space-constrained designs while exposing a broad peripheral set. The MCU architecture can also support growth from simpler designs into more demanding products by retaining compatibility with related PIC24F and dsPIC33 pin arrangements where the selected device and package permit.

Design the PCB with short analog and digital return paths, verify decoupling near the power pins, and assign any externally exposed pins according to the 48-UQFN pin-description table. When Deep Sleep is used, test wake-up behavior with real peripherals attached because the DSWDT, RTCC, DSBOR, and other sleep-capable blocks can affect timing and system state.

This product record combines the exact family specifications with practical guidance on low-power firmware, PCB implementation, analog measurement, and drop-in family alternatives. It highlights where the 32 MHz performance, 32 KB Flash memory, XLP feature set, and 6 × 6 mm UQFN footprint simplify design decisions across compact, battery-operated products.

جێگرەوەکانی جێگۆڕکێ بۆ PIC24F32KA304-E/MV — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC24F32KA304-E/MV (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Low-Power Technology, Package, Timers, Communication Interfaces, Program Memory (Flash).

Microchip Technology
Timers: 16-bit Timer/Counter modules
Communication Interfaces: 2x I2C, 2x SPI, 2x UART
Program Memory (Flash): 16 KB (5.5K x 24 instructions)
Microchip Technology
Low-Power Technology: XLP with Deep Sleep, DSBOR, DSWDT, and RTCC
Microchip Technology
Low-Power Technology: eXtreme Low Power (XLP), nanoWatt XLP
Package: 48-pin UQFN (6x6 mm)
Timers: Multiple 16-bit Timer/Counter
Microchip Technology
Low-Power Technology: eXtreme Low Power (XLP), nanoWatt XLP
Package: 48-pin UQFN (MV) 6x6 mm with exposed pad
Timers: 4 x 16-bit

PIC24F32KA304-I/MV

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 48-UQFN (6 × 6 mm)
16-bit Flash Microcontroller · PIC24F XLP · 32 MHz · 16 MIPS · Flash · 32 KB (11K x 24 words) · 2 KB · 512 bytes

پەیوەندی بۆ نرخ

بینینی داتاشیت →

PIC24FV32KA304-E/MV

✅ جێگرەوەی ڕاستەوخۆ
Microchip Technology
📦 48-UQFN (6 × 6 mm)
PIC24F 16-bit modified Harvard · 32 MHz · 32 KB (11K x 24 words) · 2 KB · 512 bytes · 2.0 V to 5.5 V · -40 C to +125 C (E grade) · 48-pin UQFN (6x6 mm)

پەیوەندی بۆ نرخ

بینینی داتاشیت →

PIC24FV32KA304-I/MV

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Microchip Technology
📦 48-UQFN (6 × 6 mm)
PIC24F 16-bit RISC · 32 MHz · 32 KB (11K x 24 words) · 2 KB · 2.0 V to 5.5 V · 36 · 12-bit, up to 16 channels · 4 x 16-bit

پەیوەندی بۆ نرخ

بینینی داتاشیت →

PIC24F32KA304-E/MV زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type 16-bit Flash Microcontroller
Architecture PIC24 RISC architecture
Maximum CPU Frequency 32 MHz
Maximum Instruction Throughput 16 MIPS
Program Memory 32 KB (11K × 24 words)
Data RAM 2 KB
EEPROM 512 bytes
ADC Resolution 12 bits
Low-Power Technology PIC XLP
Deep Sleep Peripherals DSBOR, DSWDT, and RTCC
پاکێج 48-UQFN (6 × 6 mm)
جۆری دامەزراندن Surface Mount
ADC Peripheral 12-bit ADC
CTMU Support Yes

ڕێنمایی ڕێکخستنی پینی PIC24F32KA304-E/MV 48-uqfn (6 × 6 mm)

ڕێکخستنی پین بۆ PIC24F32KA304-E/MV (پاکێجی 48-uqfn (6 × 6 mm)). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 48-uqfn (6 × 6 mm) بۆ PIC24F32KA304-E/MV

هیچ داتای وردی پینئاوت بەردەست نییە بۆ PIC24F32KA304-E/MV.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

PIC24F32KA304-E/MV گونجاوە بۆ 6 بەکارھێنانs: Battery-Powered Health Monitors, Blood-Pressure Monitor Control, Portable Industrial Sensors, Capacitive-Touch and Interface Products, Connected IoT Sensor Nodes, Compact Control and User Interface.

💊

Battery-Powered Health Monitors

The PIC24F32KA304-E/MV fits battery-powered health monitors that combine a 12-bit ADC with low-duty-cycle sampling and long standby periods. Its XLP architecture includes DSBOR, DSWDT, and RTCC blocks capable of operating during Deep Sleep mode, allowing the controller to remain responsive without keeping every peripheral active. The 32 MHz processor and 16 MIPS throughput support measurement control, signal filtering, data formatting, and low-energy communications. Designers should select the deepest approved sleep mode, disable unused peripherals, and use the DSWDT only within its timing limits. Actual battery life depends on sensor current, conversion intervals, wake sources, and the percentage of time the controller remains active.

💊

Blood-Pressure Monitor Control

The PIC24F32KA304-E/MV is suitable for coordinating the pump, valve, sensor, and user-interface functions of a compact blood-pressure monitor. Its 32 MHz CPU provides enough throughput for control sequencing, while the 12-bit ADC supports analog measurement and CTMU can support capacitive sensing. XLP low-power features make it useful between measurement phases, when the system can place selected peripherals into Deep Sleep and resume from an allowed wake source. Firmware must include safe pump timing, sensor calibration, and fault handling rather than relying only on general-purpose control logic. Medical product validation, including accuracy and safety requirements for the complete monitor, remains separate from the MCU specification.

🏭

Portable Industrial Sensors

The PIC24F32KA304-E/MV is well suited to portable industrial sensing products that require more processing capability than an 8-bit controller but must conserve battery energy. The 16-bit PIC24 architecture, 32 MHz clock, 32 KB Flash memory, and 2 KB RAM support sampling, filtering, local configuration, and communication protocols. DSBOR, DSWDT, and RTCC can remain active in Deep Sleep mode, making it possible to separate long monitoring intervals from short active-measurement windows. A robust implementation should define explicit operating states, hardware watchdog behavior, sensor-signal conditioning, and restart handling. Industrial suitability should be assessed against the product's temperature range, electromagnetic requirements, and qualification requirements rather than inferred from the MCU family name.

🧩

Capacitive-Touch and Interface Products

The PIC24F32KA304-E/MV can serve as the controller for compact capacitive-touch or mixed analog-interface products because CTMU support complements its 12-bit ADC and 32 MHz processing capability. CTMU-based measurements can be integrated with buttons, sliders, proximity sensing, or other charge-sensitive interfaces, allowing one MCU to consolidate control and user interaction. The 48-UQFN footprint reduces board area in space-constrained products. Calibration should be performed across the expected temperature, supply, and component-tolerance range, and each touch channel should be validated for noise and settling behavior. Low-power use should exploit XLP sleep modes, but the sensing system must be designed to wake reliably without producing false events.

🌐

Connected IoT Sensor Nodes

The PIC24F32KA304-E/MV fits compact connected sensor nodes that periodically read an analog input, evaluate local thresholds, and communicate through a serial peripheral. Its 32 MHz CPU, 16 MIPS throughput, 32 KB Flash, and 2 KB RAM provide adequate control and protocol overhead, while XLP modes reduce energy consumption between radio or network activity. The controller can keep DSWDT and selected timing functions active during Deep Sleep, supporting autonomous wake-and-measure behavior. Use the pin-description table to assign communications lines and follow the family data sheet for clock, peripheral, and low-power constraints. System-level standby time depends on the radio duty cycle, sensor consumption, and the firmware state machine.

📺

Compact Control and User Interface

The PIC24F32KA304-E/MV can manage compact control panels and user interfaces that combine buttons, indicators, analog controls, and serial communication. Its 16-bit instruction set and 32 MHz clock support responsive menu handling and peripheral coordination, while the 48-UQFN package preserves board area in space-constrained equipment. The 12-bit ADC can read analog controls, and CTMU provides additional options for capacitive input detection. Firmware should define debouncing and fault behavior for physical inputs and use the device's low-power modes when the panel is idle. Before layout, assign every pin from the official package table, including power, ground, programming, and any exposed-pad requirements, rather than relying on a generic 48-pin footprint.

What are the key specifications of PIC24F32KA304-E/MV that engineers should know?
The PIC24F32KA304-E/MV is a 16-bit PIC24 microcontroller with a 32 MHz maximum clock, 16 MIPS throughput, 32 KB of Flash memory, 2 KB of RAM, 512 bytes of EEPROM, and a 12-bit ADC. It is packaged in a 48-UQFN measuring 6 × 6 mm. These figures come from the Microchip product and PIC24F32KA304 family listings, making the device suitable for compact, low-power embedded products requiring mixed digital and analog control.
What is PIC24F32KA304-E/MV?
The PIC24F32KA304-E/MV is a 16-bit PIC24 family Flash microcontroller optimized for low-power, battery-powered equipment. It combines a 32 MHz processor, 32 KB of program Flash, 2 KB of RAM, 512 bytes of EEPROM, a 12-bit ADC, and CTMU support. According to the Microchip product page, its XLP architecture includes DSBOR, DSWDT, and RTCC capabilities that can operate during Deep Sleep mode.
How much memory does PIC24F32KA304-E/MV have?
The PIC24F32KA304-E/MV provides 32 KB of Flash program memory, organized as 11K × 24 words, together with 2 KB of RAM and 512 bytes of EEPROM. According to the Microchip PIC24F32KA304 family listing, the 16-bit architecture provides up to 16 MIPS at a 32 MHz clock. This combination is sufficient for embedded control, sensor processing, communications, and moderate protocol stacks in compact embedded systems.
What low-power features does PIC24F32KA304-E/MV include?
The PIC24F32KA304-E/MV uses Microchip XLP low-power technology and includes DSBOR, DSWDT, and RTCC functions that can operate in Deep Sleep mode. The manufacturer describes these features as supporting low-power performance in battery-powered designs. Use the family data sheet to select sleep modes, wake sources, and timing constraints for the exact clock, peripheral, and voltage configuration used in the product.
What package does PIC24F32KA304-E/MV use?
The PIC24F32KA304-E/MV uses a 48-pin UQFN package measuring 6 × 6 mm. The Microchip listing identifies it as the 48-UQFN option for the PIC24F32KA304 family. Its small land pattern supports compact PCB designs, but pin assignment, exposed-pad treatment, and track clearances must follow the package drawing and pin-description table in the manufacturer data sheet.
Where can I download the PIC24F32KA304-E/MV datasheet PDF?
The official PIC24F32KA304 data sheet can be downloaded from Microchip at https://ww1.microchip.com/downloads/en/devicedoc/39995_b.pdf. It contains the family electrical characteristics, pin definitions, memory map, peripheral descriptions, and package information. Use the E/MV ordering information to confirm the selected 48-UQFN package, temperature grade, and device configuration before finalizing the PCB or firmware.
Where can I find the PIC24F32KA304-E/MV pinout?
The PIC24F32KA304-E/MV pinout is located in the pin-description and package-drawing sections of the Microchip PIC24F32KA304 data sheet. Because this 48-UQFN device exposes power, ground, analog, digital I/O, programming, and clock functions on a compact footprint, use the numbered pin table to assign every PCB net. Do not infer exposed-pad connections from a generic QFN drawing.
Is PIC24F32KA304-E/MV suitable for battery-powered medical devices?
The PIC24F32KA304-E/MV is suitable for many battery-powered medical devices when its electrical and operational requirements meet the finished-product needs. Its XLP architecture, Deep Sleep-capable DSBOR, DSWDT, and RTCC blocks, 12-bit ADC, and CTMU support are useful for compact health monitors and sensor products. Medical-system qualification, regulatory validation, and patient-contact protection must be evaluated separately for the complete device.
What is the difference between PIC24F32KA304-E/MV and PIC24F32KA304-I/MV?
PIC24F32KA304-E/MV and PIC24F32KA304-I/MV share the 16-bit PIC24F32KA304 architecture, 32 MHz maximum frequency, 32 KB Flash memory, 48-UQFN package, and core peripheral set. Their ordering codes identify different temperature grades. The E/MV device is the target choice, while I/MV is an industrial-grade option that can serve as a footprint-compatible alternative when its operating-temperature requirements match the design.
Is PIC24FV32KA304-E/MV the same as PIC24F32KA304-E/MV?
PIC24FV32KA304-E/MV and PIC24F32KA304-E/MV are closely related 48-UQFN PIC24 XLP devices, but they are not identical ordering codes. The FV family data sheet lists both PIC24FV32KA304 and PIC24F32KA304, and distributor listings show the FV E/MV device with the same 32 MHz frequency and 32 KB Flash configuration. Confirm the exact electrical characteristics, pin functions, and firmware device identity before treating one as a substitute.
What can replace PIC24F32KA304-E/MV?
PIC24F32KA304-I/MV is the closest identified drop-in family alternative because it retains the 48-UQFN (6 × 6 mm) package, 32 MHz CPU, 32 KB Flash, 2 KB RAM, and 512-byte EEPROM configuration while changing the temperature-grade code. PIC24FV32KA304-E/MV and PIC24FV32KA304-I/MV are additional same-family candidates for review. Verify temperature range, analog functions, pin behavior, and device identification before replacing the target.
What is the best drop-in replacement for PIC24F32KA304-E/MV?
PIC24F32KA304-I/MV is the strongest identified drop-in replacement because it uses the same 48-UQFN (6 × 6 mm) package and retains the 32 MHz, 32 KB Flash, 2 KB RAM, and 512-byte EEPROM configuration. The meaningful change is the temperature-grade designation rather than CPU, memory, or footprint. Confirm the required ambient range and all peripheral assignments in the manufacturer data sheet before approving the substitution.
When should I choose PIC24F32KA304-E/MV over PIC24F32KA304-I/MV?
Choose PIC24F32KA304-E/MV when the design's specified operating-temperature range and qualification requirements align with the E grade rather than the I grade. Choose PIC24F32KA304-I/MV when industrial-temperature operation is required. Both devices use the 48-UQFN footprint and share the same 32 MHz, 32 KB Flash, and XLP feature set, so the decision should be based on environmental limits, qualification, availability, and lifecycle requirements.
Is PIC24F32KA304-E/MV suitable for low-power sensor applications?
Yes, PIC24F32KA304-E/MV is suitable for low-power sensor applications because its XLP architecture supports Deep Sleep operation and includes DSBOR, DSWDT, and RTCC blocks that can remain active in that mode. The 12-bit ADC supports analog measurement, while CTMU can be used for capacitive sensing. Actual battery life depends on the selected sleep mode, wake conditions, sensor duty cycle, and firmware behavior.
Where to buy PIC24F32KA304-E/MV online?
Use the Request a Quote form on this page to request PIC24F32KA304-E/MV pricing, stock confirmation, current lead time, and available quantity. The manufacturer identifies the part as a 48-UQFN, 32 MHz, 32 KB Flash PIC24 XLP microcontroller. The request should include the exact MPN PIC24F32KA304-E/MV so the shipment, package, and grade remain unambiguous.
What is the price and lead time for PIC24F32KA304-E/MV?
Current pricing, stock, minimum order quantity, and lead time for PIC24F32KA304-E/MV are obtained through the Request a Quote form on this page. Quote requests should state the required quantity, target date, and whether the 48-UQFN device is needed in tape-and-reel, tray, or another approved shipping format. This approach provides a transaction-specific response instead of a potentially stale price.
How is PIC24F32KA304-E/MV programmed and debugged?
PIC24F32KA304-E/MV is programmed and debugged through the programming and debug interfaces defined for the PIC24F32KA304 family. The device supports Microchip-compatible development tools and programming workflows, but the correct adapter, voltage, target settings, and connector arrangement must follow the Microchip programming guide and family data sheet. Confirm the package pin assignments before connecting an in-circuit programmer.
Is PIC24F32KA304-E/MV RoHS compliant?
The RoHS status of PIC24F32KA304-E/MV is not established by the cited product snippets, so it should not be assumed for a finished product. Request the current material and environmental declaration from Microchip for the exact ordering code. Similarly, confirm REACH status, lead-free finish, halogen-free status, and any automotive qualification requirements before treating compliance claims as final.

داتای سەرچاوەی ئەندازیاری بۆ PIC24F32KA304-E/MV — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose PIC24F32KA304-E/MV for a compact 16-bit embedded design that needs a 32 MHz CPU, 32 KB Flash, 12-bit ADC, CTMU, and XLP low-power operation in a 48-UQFN package. PIC24F32KA304-I/MV is the closest alternative when the same footprint, core, and memory are needed with the I temperature-grade designation. PIC24FV32KA304-E/MV is appropriate when the FV family variant is technically preferred, but its voltage and peripheral configuration should be compared with the target before substitution. PIC24FV32KA304-I/MV combines the FV family with the industrial-grade code and also requires detailed pin, electrical, and firmware verification. None of these alternatives should be approved solely from package similarity: confirm the exact exposed-pad connection, pin multiplexing, ADC behavior, CTMU support, timing, and device identifier in the manufacturer documentation.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە PIC24F32KA304-I/MV PIC24FV32KA304-E/MV PIC24FV32KA304-I/MV
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 48-UQFN (6 × 6 mm) 48-UQFN (6 × 6 mm) 48-UQFN (6 × 6 mm) 48-UQFN (6 × 6 mm)
CPU Architecture 16-bit PIC24 RISC 16-bit PIC24 RISC 16-bit PIC24 RISC 16-bit PIC24 RISC
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz
Instruction Throughput 16 MIPS 16 MIPS 16 MIPS 16 MIPS
Program Flash Memory 32 KB (11K × 24 words) 32 KB (11K × 24 words) 32 KB (11K × 24 words) 32 KB (11K × 24 words)
Data RAM 2 KB 2 KB 2 KB 2 KB
EEPROM 512 bytes 512 bytes 512 bytes 512 bytes
ADC Resolution 12 bits 12 bits 12 bits 12 bits
CTMU Support Yes Yes Yes Yes
Temperature-Grade Designator E I E I

جیاکەرەوە سەرەکییەکان

  • Identical core performance and memory profile (بەراورد بەPIC24F32KA304-I/MV)
  • Direct 48-UQFN footprint reuse (بەراورد بەPIC24FV32KA304-E/MV)
  • Deep Sleep-capable XLP peripheral set (بەراورد بەPIC24FV32KA304-I/MV)

تێبینییەکانی دیزاین

Build firmware around explicit active and Deep Sleep states. Keep only the DSBOR, DSWDT, RTCC, and other blocks required during standby active, and disable unused peripherals before entering low-power mode. Validate every wake source and recovery path with the real sensor and communication peripherals attached. Because a sleep transition can change clock and peripheral availability, allow sufficient settling time before sampling the 12-bit ADC or attempting a serial transfer.

Use the official 48-UQFN pin-description and land-pattern drawings for component placement, pad geometry, solder mask, and exposed-pad treatment. Place decoupling capacitors at the corresponding power pins and provide a low-impedance ground return for analog and digital circuitry. The 6 × 6 mm package has fine-pitch lands, so inspect the assembly process capability and verify the pin-1 orientation against the manufacturer package drawing before releasing production artwork.

Separate sensitive analog inputs from fast-switching or high-current digital nets, and route the ADC input with the shortest practical path from its source. Keep the CTMU and analog grounding network away from noisy switching nodes. If the device connects to an external sensor or communications module, use a controlled ground reference and place protection components where they cannot inject excessive leakage into the analog input. Validate the final layout with signal-integrity and EMC testing appropriate to the finished product.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The cited product descriptions do not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status for the exact ordering code. AEC-Q100 is recorded as not applicable because this is not presented as an automotive-qualified device.

داتا پشتڕاستکراوەتەوە لە: 2026-11-04 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

PIC24F32KA304-E/MV datasheet PIC24F32KA304-E/MV pinout PIC24F32KA304-E/MV datasheet pdf PIC24F32KA304-E/MV equivalent PIC24F32KA304-E/MV replacement PIC24F32KA304-E/MV price PIC24F32KA304-E/MV stock PIC24F32KA304 48-UQFN pinout PIC24F32KA304 32MHz 32KB PIC24F32KA304-E/MV vs PIC24F32KA304-I/MV PIC24F32KA304-E/MV XLP Deep Sleep PIC24F32KA304-E/MV application circuit Microchip PIC24F32KA304-E/MV PIC24F32KA304-E/MV programming

پێکهاتە و زاراوە پەیوەندیدارەکان

Microchip Technology PIC24F32KA304-E/MV PIC24F32KA304-I/MV PIC24FV32KA304-E/MV PIC24FV32KA304-I/MV PIC24 architecture PIC24F32KA304 family PIC24 XLP 16-bit microcontroller RISC microcontroller Flash microcontroller deep sleep mode DSBOR DSWDT RTCC 12-bit ADC CTMU 48-UQFN QFN package family surface mount package 32 MHz 16 MIPS 32 KB Flash memory 2 KB RAM 512-byte EEPROM
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ