PIC24FJ16MC101-E/SS - 16-Bit 16 MIPS Motor Control MCU | Microchip
MPN: PIC24FJ16MC101-E/SS ✓ چالاکPIC24FJ16MC101-E/SS گشتی
A PIC24F microcontroller combines a 16-bit CPU core, Flash memory, SRAM, timers, communication peripherals, and analog or motor-control resources on one integrated device. This product belongs to the PIC24F low-pin-count motor-control family, designed for applications where deterministic control, compact packaging, and a broad peripheral set are more important than maximum Flash capacity.
Key features include a 16-bit architecture, 16 MIPS execution capability, 16 KB of Flash organized as 5.5K words, 1 KB of SRAM, CTMU, MCPWM channels, PPS, and a 10-bit ADC. The 20-SSOP package supports space-constrained designs, while the 32 MHz operating speed provides a practical balance between control-loop performance and power consumption. The automotive-oriented -E designation and -40°C to +125°C temperature range broaden the environmental envelope.
The PIC24FJ16MC101-E/SS uses Microchip’s PIC24F 16-bit architecture with a modified Harvard instruction organization and enhanced instruction set. The CPU architecture supports efficient execution of motor-control algorithms, while the CTMU can support capacitive measurement, touch sensing, and basic analog-front-end functions. MCPWM peripherals are intended for precise timing and complementary waveform generation in motor-drive systems, and PPS enables accurate peripheral synchronization.
Typical applications include small brushless DC motor controllers, fan and pump controllers, appliance control boards, industrial actuator modules, battery-powered tools, and compact embedded control systems. The 16 KB Flash limit makes the device most appropriate for focused control firmware rather than large user interfaces or complex connectivity stacks.
Designers should verify the exact pin functions, clock configuration, ADC requirements, and decoupling recommendations in the Microchip manufacturer datasheet. SSOP-20 routing also requires adequate board spacing and careful escape-routing of power, programming, and communication signals.
This product page combines the manufacturer’s device information, distributor technical summaries, replacement analysis, and practical design guidance to help engineers identify whether the PIC24FJ16MC101-E/SS fits a specific 3.3 V motor-control design.
جێگرەوەکانی جێگۆڕکێ بۆ PIC24FJ16MC101-E/SS — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC24FJ16MC101-E/SS (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Core, Operating Temperature Range.
PIC24FJ16MC101-I/SS
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC24FJ16MC101T-I/SS
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC24FJ16MC101-E/SS زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 16-bit PIC24F motor-control microcontroller |
| CPU Architecture | 16-bit modified Harvard architecture |
| Maximum CPU Performance | 16 MIPS |
| زۆرترین فرێکوێنسیی کاتژمێر | 32 MHz |
| ڤۆڵتیەی دابینکردن | 3.3 V |
| Flash Program Memory | 16 KB (5.5K x 24) |
| SRAM | 1 KB |
| ADC Resolution | 10-bit |
| Motor-Control Peripheral | MCPWM |
| Analog Peripheral | CTMU |
| Peripheral Pin Select | PPS |
| پاکێج | 20-SSOP |
| ژمارەی پین | 20 pins |
| مەودای پلەی گەرمیی کارکردن | -40°C to +125°C |
| Automotive Qualification | AEC-Q100 |
| Instruction Set | Enhanced 16-bit instruction set |
| Program Memory Type | Flash |
| جۆری دامەزراندن | Surface mount |
ڕێنمایی ڕێکخستنی پینی PIC24FJ16MC101-E/SS 20-ssop
ڕێکخستنی پین بۆ PIC24FJ16MC101-E/SS (پاکێجی 20-ssop). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ PIC24FJ16MC101-E/SS.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
PIC24FJ16MC101-E/SS گونجاوە بۆ 6 بەکارھێنانs: Compact Brushless DC Motor Controller, Small Fan and Pump Controller, Appliance Control Module, Industrial Actuator Controller, Battery-Powered Tool Controller, Capacitive Sensing and Control Node.
Compact Brushless DC Motor Controller
The PIC24FJ16MC101-E/SS fits compact brushless DC motor controllers that require deterministic timing without a high-pin-count MCU. Its 16-bit CPU runs up to 16 MIPS, while the MCPWM peripheral supports precise motor-control waveform generation. The 16 KB Flash stores a focused control loop and the 1 KB SRAM supports real-time state management. Operating from 3.3 V and -40°C to +125°C makes the device suitable for industrial and automotive environments. The design still requires an appropriate external MOSFET driver, current sensing, overcurrent protection, and thermal analysis of the power stage.
پێشنیارکراو
Small Fan and Pump Controller
A PIC24FJ16MC101-E/SS-based fan or pump controller can use MCPWM for controlled drive signals and the 10-bit ADC to monitor a speed, pressure, or supply-related analog signal. The 32 MHz processor and 16 MIPS execution capability provide enough control-loop bandwidth for compact BLDC or DC motor regulation. The 20-SSOP package preserves board area in appliances, equipment, and thermal systems, while the -40°C to +125°C grade supports industrial conditions. Designers should preserve clean power partitioning and verify startup behavior under minimum supply voltage and maximum motor load.
پێشنیارکراو
Appliance Control Module
The PIC24FJ16MC101-E/SS is appropriate for compact appliance modules that coordinate motor functions, user inputs, and analog sensing. CTMU can support capacitive controls or measurement functions, PPS can align timing between internal peripherals, and the 16-bit CPU can execute control and communication tasks efficiently. Its 20-SSOP package reduces the footprint compared with larger leaded packages. With 16 KB of Flash and 1 KB of SRAM, the MCU is best suited to focused firmware rather than extensive connectivity middleware. Board design should include robust debouncing, brownout analysis, and separation between motor power and sensitive control signals.
پێشنیارکراو
Industrial Actuator Controller
The PIC24FJ16MC101-E/SS can serve as the control center for a compact industrial actuator where precise timing, analog feedback, and environmental robustness are important. MCPWM provides dedicated waveform resources, PPS improves synchronization, and the 10-bit ADC supports sensor inputs or supervisory measurements. The 32 MHz, 16-bit processing core offers responsive control execution, while the -40°C to +125°C range covers demanding industrial environments. The 1 KB SRAM limit requires disciplined allocation for buffers and context, so firmware should avoid unnecessary background services. ESD protection, watchdog strategy, and safe motor disable behavior remain important design considerations.
پێشنیارکراو
Battery-Powered Tool Controller
For battery-powered tools, the PIC24FJ16MC101-E/SS can coordinate motor control, current measurement, and protection logic within a small SSOP-20 footprint. The 16 MIPS 16-bit CPU supports responsive control calculations, the 10-bit ADC can monitor battery or motor feedback, and MCPWM simplifies timer-based drive sequencing. The 3.3 V operating point fits compatible low-voltage power systems. Low-pin-count packaging helps reduce board size, but users should verify sleep-mode behavior and active current against the battery budget. The external power stage must include validated low-side or high-side MOSFETs, current sensing, and robust shutdown protection.
پێشنیارکراو
Capacitive Sensing and Control Node
The PIC24FJ16MC101-E/SS can combine capacitive sensing with embedded control in a compact user-interface or equipment node. CTMU provides the analog measurement resource for capacitive detection, while the 16-bit CPU processes the results and manages motor or actuator outputs. PPS helps coordinate repetitive measurements and control updates, and the 10-bit ADC can support additional analog channels. The 20-SSOP package limits board area, while the extended -40°C to +125°C operating range supports harsh environments. Designers should validate CTMU timing, calibration behavior, and grounding against the manufacturer reference circuit rather than treating the peripheral as a universal touch controller.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ PIC24FJ16MC101-E/SS — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | PIC24FJ16MC101-I/SS | PIC24FJ16MC101T-I/SS |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-SSOP | 20-SSOP | 20-SSOP |
| CPU Architecture | 16-bit modified Harvard architecture | 16-bit modified Harvard architecture | 16-bit modified Harvard architecture |
| Maximum Performance | 16 MIPS | 16 MIPS | 16 MIPS |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz |
| Flash Program Memory | 16 KB (5.5K x 24) | 16 KB | 16 KB |
| SRAM | 1 KB | 1 KB | 1 KB |
| Motor-Control Peripheral | MCPWM | MCPWM | MCPWM |
| ADC Resolution | 10-bit | 10-bit | 10-bit |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V |
جیاکەرەوە سەرەکییەکان
- Integrated motor-control resources in a compact footprint (بەراورد بەPIC24FJ16MC101-I/SS)
- Same-package family alternative for industrial designs (بەراورد بەPIC24FJ16MC101T-I/SS)
- Motor-control integration reduces discrete controller overhead (بەراورد بەPIC24FJ16MC101-I/SS)
تێبینییەکانی دیزاین
Place the device power pins and decoupling network according to the manufacturer datasheet and reference layout. Keep the 3.3 V return path compact and use separate, tightly routed paths for digital control current and switching-node current. This is especially important in motor-control boards because MOSFET drain currents can create ground bounce that corrupts ADC and CTMU measurements.
The 20-SSOP footprint has a narrow lead pitch and requires careful fanout from the device to programming, oscillator, communication, and motor-control nets. Preserve access to programming and debug signals, maintain adequate spacing between sensitive analog inputs and motor-switching nodes, and follow the manufacturer land pattern rather than deriving dimensions from a generic SSOP drawing.
Do not assume that a same-family MCU is firmware- and qualification-compatible merely because the flash and SRAM capacities match. Check device-specific peripheral assignments, pin multiplexing, bootloader behavior, configuration bits, temperature grade, qualification, and package markings before approving PIC24FJ16MC101-I/SS or PIC24FJ16MC101T-I/SS as a substitution.
Route MCPWM outputs directly toward the external gate-driver interface and keep switching-node copper away from CTMU and ADC inputs. PPS timing can improve peripheral synchronization, but it does not correct unsuitable PCB topology or grounding. Validate the complete layout for crosstalk, ground return paths, and motor-transient margin using the manufacturer peripheral guidance.
زانیاری پابەندبوون
The PIC24FJ16MC101-E/SS is identified as AEC-Q100 in the product listing. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not stated in the cited product information.