PIC24FV32KA301-I/P - 32MHz XLP 16-Bit MCU | Microchip Technology
MPN: PIC24FV32KA301-I/P ✓ چالاکPIC24FV32KA301-I/P گشتی
A PIC XLP microcontroller is an ultra-low-power 16-bit RISC microcontroller that extends the 8-bit PIC architecture with greater processing performance, dedicated low-power peripherals, and flexible power-management modes. The XLP feature set includes Deep Sleep brown-out reset, Deep Sleep watchdog timer operation, and a real-time clock capable of operating in low-power conditions, allowing a system to preserve state and reduce energy use when external activity is absent.
The PIC24FV32KA301-I/P combines 32 KB of flash program memory organized as 11K × 24 bits with 2 KB of data RAM and 17 general-purpose I/O pins. Its 32 MHz operating capability supports more responsive control than an 8-bit MCU while retaining a compact 20-pin footprint. A 12-bit ADC and capacitive touch measurement unit, identified as CTMU in the verified distributor data, add mixed-signal capabilities without requiring separate sensing devices.
The device belongs to Microchip's PIC24FV32KA301 family, which combines a 16-bit instruction set with XLP low-power technology. The industrial-temperature ordering code uses the -I suffix, while the provided sources confirm the device is currently active. Its PDIP-20 package supports through-hole assembly and can be useful where hand prototyping, socketed prototypes, or repairability are more important than minimizing board area.
Typical uses include battery-powered sensing nodes, environmental monitors, industrial condition-monitoring equipment, compact control panels, connected maintenance devices, and low-power embedded products. The 12-bit ADC supports analog measurement, CTMU supports capacitive sensing, and the 17 GPIO pins can connect digital sensors, indicators, communication interfaces, and actuators.
Designers should account for the DIP footprint, available I/O, operating-voltage range, and the firmware requirements of the PIC24FXXKA1XX/FVXXKA3XX programming specifications. Low-power operation should be validated against actual sensor standby current, wake-up behavior, and the required measurement interval rather than relying on nominal active-mode figures alone.
This product page combines verified manufacturer and distributor information with a practical comparison of available package and ordering variants, engineering selection guidance, and low-power design considerations. It is intended to help engineers identify whether the PIC24FV32KA301-I/P fits an existing 20-pin embedded design before purchasing.
جێگرەوەکانی جێگۆڕکێ بۆ PIC24FV32KA301-I/P — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC24FV32KA301-I/P (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Mounting Type, Program Memory (Flash), Core Architecture, Deep Sleep Peripherals.
PIC24FV32KA301-E/P
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC24FV32KA301-I/SP
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC24FV32KA301-I/P زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | 16-bit flash microcontroller |
| Architecture | 16-bit PIC RISC |
| زۆرترین فرێکوێنسیی کاتژمێر | 32 MHz |
| Program Memory | 32 KB (11K × 24 bits) |
| Program Memory Type | Flash |
| Data RAM | 2 KB |
| General-Purpose I/O Pins | 17 |
| ڤۆڵتاژی دابینکردنی کارکردن | 1.8 V to 3.6 V |
| ADC Resolution | 12 bits |
| Analog Peripheral | CTMU capacitive touch measurement unit |
| Internal Oscillator | Internal |
| پاکێج | 20-PDIP, 0.300 inch, 7.62 mm lead pitch |
| جۆری دامەزراندن | Through-hole |
| Low-Power Technology | PIC XLP |
| Deep Sleep Peripherals | DSBOR, DSWDT and RTCC |
| Temperature Grade | Industrial grade |
| دۆخی چرخەی ژیان | Active |
ڕێنمایی ڕێکخستنی پینی PIC24FV32KA301-I/P 20-pdip, 0.300 inch, 7.62 mm lead pitch
ڕێکخستنی پین بۆ PIC24FV32KA301-I/P (پاکێجی 20-pdip, 0.300 inch, 7.62 mm lead pitch). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ PIC24FV32KA301-I/P.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
PIC24FV32KA301-I/P گونجاوە بۆ 6 بەکارھێنانs: Battery-Powered Environmental Sensor, Industrial Condition Monitoring, Capacitive-Touch Control Panel, Low-Power Remote Control, Compact Analog Control System, Connected Maintenance Device.
Battery-Powered Environmental Sensor
The PIC24FV32KA301-I/P fits battery-powered environmental sensing because its PIC XLP architecture includes Deep Sleep support through DSBOR, DSWDT, and RTCC. The 12-bit ADC can measure sensor outputs, while 17 I/O pins provide connections for a digital sensor, status indicator, and low-power interface. A 32 MHz processor also allows more local filtering and compensation than a small 8-bit controller. The principal design trade-off is the 20-PDIP footprint, which consumes more board area than a surface-mount MCU but simplifies prototyping and replacement.
پێشنیارکراو
Industrial Condition Monitoring
The PIC24FV32KA301-I/P is suitable for industrial condition-monitoring nodes that combine periodic analog measurement with local control. Its 12-bit ADC supports sensor acquisition, 17 GPIO pins support discrete inputs and outputs, and 32 KB of flash provides room for application firmware and parameter storage. The -I ordering suffix identifies the industrial-grade variant. Engineers should verify the complete temperature limits and account for the through-hole 20-PDIP footprint when designing compact monitoring terminals or ruggedized field equipment.
پێشنیارکراو
Capacitive-Touch Control Panel
The PIC24FV32KA301-I/P can serve as the controller for a compact capacitive-touch user interface because the verified feature set includes CTMU. Engineers can use CTMU for capacitive measurement while the 12-bit ADC supports analog control or monitoring functions. Its 32 MHz performance and 32 KB flash provide room for debounce logic, calibration data, interface handling, and product-specific behavior. The 17 I/O pins permit integration of indicators and shared buses, although the 20-PDIP package is less compact than an equivalent surface-mount controller.
پێشنیارکراو
Low-Power Remote Control
The PIC24FV32KA301-I/P works well in a low-power remote-control product that must wake, interpret an input, and return to sleep. Microchip identifies DSBOR, DSWDT, and RTCC as Deep Sleep-capable XLP features, allowing the controller to maintain essential low-power functions between user actions. The 32 MHz operating rate provides responsive control logic, while flash stores firmware and configuration. Actual standby duration depends on the selected sleep configuration, external pull networks, and leakage, so system-level current measurements remain essential.
پێشنیارکراو
Compact Analog Control System
The PIC24FV32KA301-I/P is appropriate for compact analog control systems that combine sensor measurement with discrete output control. Its 12-bit ADC provides an analog input channel, 17 GPIO pins can drive relays, indicators, or digital converters, and 2 KB of RAM supports control state and buffering. At 32 MHz, the controller can execute timing, filtering, and supervisory functions within a 20-pin PDIP footprint. Through-hole assembly is beneficial for prototypes and serviceable industrial electronics, where board area is less restrictive than in a miniaturized product.
پێشنیارکراو
Connected Maintenance Device
The PIC24FV32KA301-I/P can serve as the embedded controller in a connected maintenance device that monitors equipment and reports status through a serial interface. The 32 KB flash capacity accommodates networking and application code, the 17 I/O pins support sensors and communications, and XLP functions help reduce energy consumption when updates are infrequent. A 32 MHz core provides useful headroom for protocol handling and local diagnostics. Designers should select external interface components with voltage levels compatible with the verified 1.8 V to 3.6 V supply range.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ PIC24FV32KA301-I/P — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | PIC24FV32KA301-E/P | PIC24FV32KA301-I/SP |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-PDIP | 20-PDIP - same | 20-PDIP - same according to verified snippet |
| Architecture | 16-bit PIC RISC | 16-bit PIC RISC | 16-bit PIC RISC |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz |
| Program Memory | 32 KB (11K × 24 bits) | 32 KB (11K × 24 bits) | 32 KB |
| Data RAM | 2 KB | 2 KB | 2 KB |
| General-Purpose I/O | 17 pins | 17 pins | 17 pins |
| ADC and Touch Sensing | 12-bit ADC with CTMU | 12-bit ADC with CTMU | 12-bit ADC with CTMU |
| Low-Power Features | PIC XLP with DSBOR, DSWDT and RTCC | PIC XLP family | PIC XLP family |
| Ordering Code | PIC24FV32KA301-I/P | PIC24FV32KA301-E/P | PIC24FV32KA301-I/SP |
جیاکەرەوە سەرەکییەکان
- Industrial ordering grade in a serviceable through-hole package (بەراورد بەPIC24FV32KA301-E/P)
- Substantial program and working memory for a 20-pin MCU (بەراورد بەPIC24FV32KA301-E/P)
- Mixed-signal sensing without a separate touch controller (بەراورد بەPIC24FV32KA301-I/SP)
تێبینییەکانی دیزاین
Design the supply rail for the verified 1.8 V to 3.6 V operating range and calculate average consumption from active and Deep Sleep currents under the selected operating configuration. DSBOR, DSWDT, and RTCC can remain useful during low-power operation, but their actual contribution depends on firmware and clock settings. Validate leakage from sensors, pull resistors, indicators, and the programming interface because board-level current can dominate a battery-powered design.
Reserve a 20-pin PDIP footprint with the verified 0.300 inch, 7.62 mm lead pitch and provide adequate clearance around the device. The through-hole package is straightforward to prototype and repair, but it occupies more board area than a surface-mount MCU. If a PCB already uses this footprint, verify every signal, supply, and programming connection against the manufacturer pin table before substituting an ordering code.
Do not treat a related family MPN as automatically interchangeable. Confirm the operating-temperature grade represented by the -I or -E suffix, the exact package, all peripheral assignments, programming configuration, and required low-power behavior. The supplied records verify core capacities and package information for the alternatives but do not include complete pin tables, so a schematic-level comparison against the Microchip data sheet is mandatory.
Place decoupling and analog-support components close to their associated supply and input pins, while keeping switching or high-current paths away from the 12-bit ADC and CTMU sensing nodes. Use a quiet ground strategy appropriate to the measured signal bandwidth. Exact capacitance, grounding, and routing values should follow the manufacturer's recommended application circuit because those values were not present in the verified dataset.
زانیاری پابەندبوون
The verified snippets identify the package as lead-free plastic, but they do not provide a complete RoHS declaration, REACH declaration, halogen-free statement, conflict-minerals report, or AEC-Q100 qualification. These fields therefore remain unknown rather than assumed.