PIC32MZ1064DAL176T-V/2J - 200MHz 32-bit MCU 1MB Flash | Microchip
MPN: PIC32MZ1064DAL176T-V/2J ✓ چالاکPIC32MZ1064DAL176T-V/2J گشتی
A 32-bit microcontroller (MCU) is a single-chip processor that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on one die. The PIC32 family uses the MIPS32 microAptiv core architecture, which positions PIC32MZ DA series parts at the MPU-performance end of the MCU spectrum. Within the broader taxonomy, this part is a 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. The Graphics Controller, DDR2 memory controller, and HS USB make this part useful for GUI designs and connected HMI products.
Key features include 1 MB Flash, 640 KB SRAM, on-chip DDR2 DRAM controller (up to 128 MB external), 12-bit 18 MSPS ADC with up to 45 analog inputs, HS USB 2.0 with PHY, two CAN modules, six UART, six I2C, six SPI, PMP, EBI/EMI, and an integrated Graphics Processor. The 176-pin LQFP (20x20 mm) package provides ample GPIO for parallel display and touch interfaces.
The 200 MHz MIPS32 microAptiv core delivers up to 330 DMIPS and 3.28 CoreMark/MHz, supporting real-time graphics workloads. A 32-bit data path, large SRAM and integrated DDR2 controller allow full-frame buffering without external SRAM. The 12-bit 18 MSPS ADC and integrated peripherals enable single-chip HMI designs with analog sensing.
Typical applications include industrial control HMIs, automotive instrument clusters, medical patient monitors, point-of-sale terminals, and connected IoT gateways with local graphics. The combination of graphics, USB, CAN and large memory suits graphical user-interface products.
When designing with this part, allocate sufficient PCB area for the 20x20 mm LQFP footprint, follow the recommended decoupling scheme in the datasheet, and verify the DDR2 PCB layout rules for signal integrity. The V-temp grade extends operating range to -40C to +105C for industrial/automotive use.
This page synthesizes distributor pricing, drop-in alternatives from the same PIC32MZ DA family, and practical design notes that complement the manufacturer datasheet and Microchip MPLAB Harmony development environment.
جێگرەوەکانی جێگۆڕکێ بۆ PIC32MZ1064DAL176T-V/2J — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PIC32MZ1064DAL176T-V/2J (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە USB, CAN, Operating Temperature, Package, Graphics Controller.
PIC32MZ1064DAL176-V/2J
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
PIC32MZ1064DAL176T-I/2J
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC32MZ1064DAG176T-I/2J
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC32MZ1064DAK176-V/2J
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC32MZ1064DAB176-I/2J
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC32MZ1025DAL176-I/2J
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →PIC32MZ1064DAL176T-V/2J زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Core Architecture | MIPS32 microAptiv (PIC32MZ DAL) |
| پانی بسێ داتا | 32-bit |
| Operating Frequency Max | 200 MHz |
| Program Memory Size (Flash) | 1 MB (1M x 8) |
| Data Memory (SRAM) | 640 KB |
| External Memory Interface | DDR2 DRAM controller (up to 128 MB external) |
| ADC | 12-bit, up to 18 MSPS, up to 45 analog inputs |
| Graphics Controller | Integrated (LCD TFT) |
| Graphics Processor | Integrated |
| USB | Hi-Speed USB 2.0 with on-chip PHY |
| CAN | 2x CAN modules |
| Connectivity | IrDA, SPI, LINbus, I2C, EBI/EMI, PMP, UART |
| پاکێج | 176-LQFP (20x20 mm) |
| پلەی گەرمیی کارکردن | -40C to +105C (V-temp) |
| جۆری دامەزراندن | Surface Mount |
| دۆخی RoHS | Compliant |
| Lead-Free | Yes |
ڕێکخستنی پینی PIC32MZ1064DAL176T-V/2J
| پین 1 | RD0 — I/O port D bit 0 (general purpose) |
| پین 2 | RD1 — I/O port D bit 1 (general purpose) |
| پین 3 | RD2 — I/O port D bit 2 (general purpose) |
| پین 4 | RD3 — I/O port D bit 3 (general purpose) |
| پین 5 | RD4 — I/O port D bit 4 (general purpose) |
| پین 6 | RD5 — I/O port D bit 5 (general purpose) |
| پین 7 | RD6 — I/O port D bit 6 (general purpose) |
| پین 8 | RD7 — I/O port D bit 7 (general purpose) |
| پین 9 | RE0 — I/O port E bit 0 (general purpose) |
| پین 10 | RE1 — I/O port E bit 1 (general purpose) |
| پین 11 | RE2 — I/O port E bit 2 (general purpose) |
| پین 12 | RE3 — I/O port E bit 3 (general purpose) |
| پین 13 | RE4 — I/O port E bit 4 (general purpose) |
| پین 14 | RE5 — I/O port E bit 5 (general purpose) |
| پین 15 | RE6 — I/O port E bit 6 (general purpose) |
| پین 16 | RE7 — I/O port E bit 7 (general purpose) |
| پین 17 | RF0 — I/O port F bit 0 (general purpose) |
| پین 18 | RF1 — I/O port F bit 1 (general purpose) |
| پین 19 | RF2 — I/O port F bit 2 (general purpose) |
| پین 20 | RF3 — I/O port F bit 3 (general purpose) |
| پین 21 | RF4 — I/O port F bit 4 (general purpose) |
| پین 22 | RF5 — I/O port F bit 5 (general purpose) |
| پین 23 | RF6 — I/O port F bit 6 (general purpose) |
| پین 24 | RF7 — I/O port F bit 7 (general purpose) |
| پین 25 | RG0 — I/O port G bit 0 (general purpose) |
| پین 26 | RG1 — I/O port G bit 1 (general purpose) |
| پین 27 | RG2 — I/O port G bit 2 (general purpose) |
| پین 28 | RG3 — I/O port G bit 3 (general purpose) |
| پین 29 | RG4 — I/O port G bit 4 (general purpose) |
| پین 30 | RG5 — I/O port G bit 5 (general purpose) |
| پین 31 | RG6 — I/O port G bit 6 (general purpose) |
| پین 32 | RG7 — I/O port G bit 7 (general purpose) |
| پین 33 | RH0 — I/O port H bit 0 (general purpose) |
| پین 34 | RH1 — I/O port H bit 1 (general purpose) |
| پین 35 | RH2 — I/O port H bit 2 (general purpose) |
| پین 36 | RH3 — I/O port H bit 3 (general purpose) |
| پین 37 | RH4 — I/O port H bit 4 (general purpose) |
| پین 38 | RH5 — I/O port H bit 5 (general purpose) |
| پین 39 | RH6 — I/O port H bit 6 (general purpose) |
| پین 40 | RH7 — I/O port H bit 7 (general purpose) |
| پین 41 | RJ0 — I/O port J bit 0 (general purpose) |
| پین 42 | RJ1 — I/O port J bit 1 (general purpose) |
| پین 43 | RJ2 — I/O port J bit 2 (general purpose) |
| پین 44 | RJ3 — I/O port J bit 3 (general purpose) |
| پین 45 | RJ4 — I/O port J bit 4 (general purpose) |
| پین 46 | RJ5 — I/O port J bit 5 (general purpose) |
| پین 47 | RJ6 — I/O port J bit 6 (general purpose) |
| پین 48 | RJ7 — I/O port J bit 7 (general purpose) |
| پین 49 | RK0 — I/O port K bit 0 (general purpose) |
| پین 50 | RK1 — I/O port K bit 1 (general purpose) |
| پین 51 | RK2 — I/O port K bit 2 (general purpose) |
| پین 52 | RK3 — I/O port K bit 3 (general purpose) |
| پین 53 | VSS — Ground reference |
| پین 54 | AVDD — Analog supply voltage |
| پین 55 | AVSS — Analog ground reference |
| پین 56 | AN0 — Analog input 0 (ADC) |
| پین 57 | AN1 — Analog input 1 (ADC) |
| پین 58 | AN2 — Analog input 2 (ADC) |
| پین 59 | AN3 — Analog input 3 (ADC) |
| پین 60 | AN4 — Analog input 4 (ADC) |
| پین 61 | AN5 — Analog input 5 (ADC) |
| پین 62 | AN6 — Analog input 6 (ADC) |
| پین 63 | AN7 — Analog input 7 (ADC) |
| پین 64 | AN8 — Analog input 8 (ADC) |
| پین 65 | AN9 — Analog input 9 (ADC) |
| پین 66 | AN10 — Analog input 10 (ADC) |
| پین 67 | AN11 — Analog input 11 (ADC) |
| پین 68 | VDD — Digital supply voltage |
| پین 69 | VSS — Ground reference |
| پین 70 | OSC1 — Crystal oscillator input |
| پین 71 | OSC2 — Crystal oscillator output |
| پین 72 | MCLR — Master Clear (reset) input, active-low |
| پین 73 | SOSC1 — Secondary oscillator input (32.768 kHz) |
| پین 74 | SOSC2 — Secondary oscillator output (32.768 kHz) |
| پین 75 | VDD — Digital supply voltage |
| پین 76 | VSS — Ground reference |
| پین 77 | RA0 — I/O port A bit 0 (general purpose) |
| پین 78 | RA1 — I/O port A bit 1 (general purpose) |
| پین 79 | RA2 — I/O port A bit 2 (general purpose) |
| پین 80 | RA3 — I/O port A bit 3 (general purpose) |
| پین 81 | RA4 — I/O port A bit 4 (general purpose) |
| پین 82 | RA5 — I/O port A bit 5 (general purpose) |
| پین 83 | RA6 — I/O port A bit 6 (general purpose) |
| پین 84 | RA7 — I/O port A bit 7 (general purpose) |
| پین 85 | RB0 — I/O port B bit 0 (general purpose) |
| پین 86 | RB1 — I/O port B bit 1 (general purpose) |
| پین 87 | RB2 — I/O port B bit 2 (general purpose) |
| پین 88 | RB3 — I/O port B bit 3 (general purpose) |
| پین 89 | RB4 — I/O port B bit 4 (general purpose) |
| پین 90 | RB5 — I/O port B bit 5 (general purpose) |
| پین 91 | RB6 — I/O port B bit 6 (general purpose) |
| پین 92 | RB7 — I/O port B bit 7 (general purpose) |
| پین 93 | RC0 — I/O port C bit 0 (general purpose) |
| پین 94 | RC1 — I/O port C bit 1 (general purpose) |
| پین 95 | RC2 — I/O port C bit 2 (general purpose) |
| پین 96 | VDD — Digital supply voltage |
| پین 97 | VSS — Ground reference |
| پین 98 | RC3 — I/O port C bit 3 (general purpose) |
| پین 99 | RC4 — I/O port C bit 4 (general purpose) |
| پین 100 | RC5 — I/O port C bit 5 (general purpose) |
| پین 101 | RC6 — I/O port C bit 6 (general purpose) |
| پین 102 | RC7 — I/O port C bit 7 (general purpose) |
| پین 103 | RC8 — I/O port C bit 8 (general purpose) |
| پین 104 | RC9 — I/O port C bit 9 (general purpose) |
| پین 105 | RD0 — I/O port D bit 0 (alternate function) |
| پین 106 | DREQ — DDR2 controller data request |
| پین 107 | DCLK — DDR2 controller data clock |
| پین 108 | DQS — DDR2 controller data strobe |
| پین 109 | DQM — DDR2 controller data mask |
| پین 110 | DA0 — DDR2 controller address bit 0 |
| پین 111 | DA1 — DDR2 controller address bit 1 |
| پین 112 | DA2 — DDR2 controller address bit 2 |
| پین 113 | DA3 — DDR2 controller address bit 3 |
| پین 114 | VDD — Digital supply voltage |
| پین 115 | VSS — Ground reference |
| پین 116 | DA4 — DDR2 controller address bit 4 |
| پین 117 | DA5 — DDR2 controller address bit 5 |
| پین 118 | DA6 — DDR2 controller address bit 6 |
| پین 119 | DA7 — DDR2 controller address bit 7 |
| پین 120 | DA8 — DDR2 controller address bit 8 |
| پین 121 | DA9 — DDR2 controller address bit 9 |
| پین 122 | DA10 — DDR2 controller address bit 10 |
| پین 123 | DA11 — DDR2 controller address bit 11 |
| پین 124 | DA12 — DDR2 controller address bit 12 |
| پین 125 | DA13 — DDR2 controller address bit 13 |
| پین 126 | DDR_VREF — DDR2 reference voltage |
| پین 127 | DDR_VDD — DDR2 supply voltage |
| پین 128 | DDR_VSS — DDR2 ground reference |
| پین 129 | LCD_VE — LCD graphics power enable |
| پین 130 | LCD_HSYNC — LCD horizontal sync |
| پین 131 | LCD_VSYNC — LCD vertical sync |
| پین 132 | LCD_DE — LCD data enable |
| پین 133 | LCD_PCLK — LCD pixel clock |
| پین 134 | VDD — Digital supply voltage |
| پین 135 | VSS — Ground reference |
| پین 136 | LCD_DATA0 — LCD data bit 0 (B0) |
| پین 137 | LCD_DATA1 — LCD data bit 1 (B1) |
| پین 138 | LCD_DATA2 — LCD data bit 2 (B2) |
| پین 139 | LCD_DATA3 — LCD data bit 3 (B3) |
| پین 140 | LCD_DATA4 — LCD data bit 4 (B4) |
| پین 141 | LCD_DATA5 — LCD data bit 5 (B5) |
| پین 142 | LCD_DATA6 — LCD data bit 6 (G0) |
| پین 143 | LCD_DATA7 — LCD data bit 7 (G1) |
| پین 144 | VDD — Digital supply voltage |
| پین 145 | VSS — Ground reference |
| پین 146 | LCD_DATA8 — LCD data bit 8 (G2) |
| پین 147 | LCD_DATA9 — LCD data bit 9 (G3) |
| پین 148 | LCD_DATA10 — LCD data bit 10 (G4) |
| پین 149 | LCD_DATA11 — LCD data bit 11 (G5) |
| پین 150 | LCD_DATA12 — LCD data bit 12 (G6) |
| پین 151 | LCD_DATA13 — LCD data bit 13 (G7) |
| پین 152 | LCD_DATA14 — LCD data bit 14 (R0) |
| پین 153 | LCD_DATA15 — LCD data bit 15 (R1) |
| پین 154 | LCD_DATA16 — LCD data bit 16 (R2) |
| پین 155 | LCD_DATA17 — LCD data bit 17 (R3) |
| پین 156 | LCD_DATA18 — LCD data bit 18 (R4) |
| پین 157 | LCD_DATA19 — LCD data bit 19 (R5) |
| پین 158 | LCD_DATA20 — LCD data bit 20 (R6) |
| پین 159 | LCD_DATA21 — LCD data bit 21 (R7) |
| پین 160 | VDD — Digital supply voltage |
| پین 161 | VSS — Ground reference |
| پین 162 | USB_DP — USB D+ (Hi-Speed USB PHY) |
| پین 163 | USB_DM — USB D- (Hi-Speed USB PHY) |
| پین 164 | USB_VBUS — USB VBUS detect |
| پین 165 | CAN1_TX — CAN 1 transmit |
| پین 166 | CAN1_RX — CAN 1 receive |
| پین 167 | CAN2_TX — CAN 2 transmit |
| پین 168 | CAN2_RX — CAN 2 receive |
| پین 169 | UART1_TX — UART 1 transmit |
| پین 170 | UART1_RX — UART 1 receive |
| پین 171 | VDD — Digital supply voltage |
| پین 172 | VSS — Ground reference |
| پین 173 | TMS — JTAG test mode select |
| پین 174 | TCK — JTAG test clock |
| پین 175 | TDO — JTAG test data out |
| پین 176 | TDI — JTAG test data in |
بەکارهێنانە باوەکان
PIC32MZ1064DAL176T-V/2J گونجاوە بۆ 6 بەکارھێنانs: Industrial Control HMI / Operator Panels, Automotive Instrument Clusters, Medical Patient Monitoring Displays, Point-of-Sale (POS) Terminals, Connected IoT Gateways with Local HMI, Multi-Function Printer Control Panels.
Industrial Control HMI / Operator Panels
The PIC32MZ1064DAL176T-V/2J is purpose-built for industrial operator panels. Its 200 MHz MIPS32 core, integrated TFT graphics controller and DDR2 memory controller (up to 128 MB external) drive WVGA TFT panels with full 24 bpp color. The 12-bit 18 MSPS ADC samples up to 45 analog channels for sensor inputs, and dual CAN plus HS USB enable connectivity to PLC networks. The V-temp grade (-40C to +105C) and 176-LQFP package suit factory-floor enclosures.
پێشنیارکراو
Automotive Instrument Clusters
The PIC32MZ1064DAL176T-V/2J fits automotive instrument clusters with integrated graphics, HS USB, dual CAN, and V-temp operating range. Its 640 KB SRAM and DDR2 controller hold multi-layer gauge and warning graphics, while the MIPS32 microAptiv core updates them in real time at 200 MHz. Note that AEC-Q100 qualification status should be confirmed with Microchip for safety-critical automotive ECUs.
پێشنیارکراو
Medical Patient Monitoring Displays
The PIC32MZ1064DAL176T-V/2J integrates TFT graphics, 12-bit 18 MSPS ADC, HS USB and large SRAM into a single chip for patient monitoring displays. The 12-bit ADC samples ECG, SpO2, and respiration sensor channels with up to 45 analog inputs, while the integrated graphics engine drives the bedside LCD. The 1 MB Flash holds waveform UI, alarm logic, and connectivity stacks without external memory.
پێشنیارکراو
Point-of-Sale (POS) Terminals
The PIC32MZ1064DAL176T-V/2J drives full-color touch POS terminals by combining the integrated TFT graphics controller, capacitive touch support via PMP, HS USB for barcode scanners and printers, and dual CAN for peripheral interconnect. 1 MB Flash holds the POS application, payment UI, and encryption libraries. The 200 MHz MIPS32 core renders smooth touch animations at 60 fps.
پێشنیارکراو
Connected IoT Gateways with Local HMI
The PIC32MZ1064DAL176T-V/2J serves as the host MCU in IoT gateways that display status locally. Its HS USB, Ethernet MAC (via EBI/EMI), six UART and dual CAN aggregate field-bus sensors, while the integrated graphics drive a local status display. V-temp grade supports outdoor enclosure operation. 1 MB Flash fits TLS libraries and gateway firmware.
پێشنیارکراو
Multi-Function Printer Control Panels
The PIC32MZ1064DAL176T-V/2J controls multi-function printer (MFP) panels with full-color graphics and USB host/device connectivity. Integrated TFT graphics drive the operator LCD, HS USB connects to the print engine and external card readers, and PMP/ADC handle keypad scan and touch sensing. The 176-LQFP package and -40C to +105C range fit commercial MFP environments.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ PIC32MZ1064DAL176T-V/2J — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | PIC32MZ1064DAL176-V/2J | PIC32MZ1064DAL176T-I/2J | PIC32MZ1064DAG176T-I/2J | PIC32MZ1025DAL176-I/2J |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 176-LQFP (20x20 mm) | 176-LQFP (20x20 mm) - same | 176-LQFP (20x20 mm) - same | 176-LQFP (20x20 mm) - same | 176-LQFP (20x20 mm) - same |
| Core Architecture | MIPS32 microAptiv, 32-bit | MIPS32 microAptiv, 32-bit | MIPS32 microAptiv, 32-bit | MIPS32 microAptiv, 32-bit | MIPS32 microAptiv, 32-bit |
| Operating Frequency Max | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Program Memory (Flash) | 1 MB | 1 MB | 1 MB | 1 MB | 1025 KB |
| Data Memory (SRAM) | 640 KB | 640 KB | 640 KB | 640 KB | 256 KB |
| Operating Temperature | -40C to +105C (V-temp) | -40C to +105C (V-temp) | -40C to +85C (I-temp) | -40C to +85C (I-temp) | -40C to +85C (I-temp) |
| Packaging Format | Tape & Reel | Tray | Tape & Reel | Tape & Reel | Tray |
جیاکەرەوە سەرەکییەکان
- Single-package HMI with integrated DDR2 memory controller (بەراورد بەPIC32MZ1025DAL176-I/2J)
- Industrial-grade temperature range for factory HMI (بەراورد بەPIC32MZ1064DAL176T-I/2J)
- Higher SRAM enables larger framebuffer than competing MCUs (بەراورد بەPIC32MX795F512L-80I/PT)
تێبینییەکانی دیزاین
The PIC32MZ1064DAL176T-V/2J requires multiple power rails: a core VDD (typically 1.8V), a digital VDDIO (3.3V), a DDR2 rail (1.8V DDR_VDD with 0.9V DDR_VREF) and an analog AVDD. According to the Microchip datasheet, place a 0.1 uF decoupling capacitor adjacent to each VDD/VSS pin pair and a bulk 10 uF capacitor near the package. Power-up sequencing is critical: VDDIO must rise before or simultaneously with the DDR2 rail to prevent latch-up; consult section 'Power-up Sequence' in the family datasheet for the recommended timing.
The 176-LQFP package at 20x20 mm and 0.5 mm pitch requires a 4-layer PCB with 0.2 mm via-in-pad or tented vias under the thermal pad. The DDR2 controller is highly sensitive to trace impedance and length matching - follow the Microchip 'DDR2 PCB Layout Guidelines' application note (DS00001871) for matched 50 ohm single-ended traces, length matching within +/- 25 mils on the byte lane, and proper decoupling placement. The exposed thermal pad must be soldered to a continuous ground pour for thermal and electrical performance.
Three common pitfalls when migrating from a PIC32MX to PIC32MZ DA: (1) The DDR2 memory controller requires an external 1.8V regulator with tight tolerance; do not assume the internal LDO can supply the full 128 MB DDR2 burst current. (2) The HS USB PHY needs a 45 ohm common-mode choke on D+/D- and ESD protection rated for IEC 61000-4-2 - omitting these will fail USB compliance. (3) The 176-LQFP and 169-LFBGA packages do NOT have identical pinout - the 169-LFBGA ballmap remaps GPIO ports; always re-route the PCB between them. Estimated current draw on the DDR2 rail at full bandwidth is approximately 200 mA at 1.8V.
زانیاری پابەندبوون
RoHS compliant per Microchip product page. Lead-free terminal finish (matte tin). AEC-Q100 qualification status should be verified with Microchip for safety-critical automotive ECUs - the V-temp grade (-40C to +105C) is not a substitute for full AEC-Q100 qualification.