R5F11CBCGNA#20 - 32MHz 16-Bit RL78 MCU | Renesas
MPN: R5F11CBCGNA#20 ✓ چالاکR5F11CBCGNA#20 گشتی
A microcontroller is a programmable semiconductor that integrates a processor core, memory, analog and digital peripherals, and communication interfaces on one device. The RL78 family combines compact code architecture with energy-saving operating modes. Within the broader semiconductor hierarchy, an MCU is an embedded processing IC, while the RL78/I1E family is designed specifically for systems that combine digital control with precision analog measurement.
The R5F11CBCGNA#20 provides 16-bit processing, 32 MHz operating frequency, and 32 KB of flash memory. A configurable analog front end supports signal conditioning for sensor-based products. The specified -40°C to +105°C operating-temperature range supports industrial equipment and other systems exposed to extended ambient temperatures. Ultra-low-power technology makes the device suitable for systems where standby consumption is an important design constraint.
The device integrates control processing and analog measurement functions, reducing the need for separate signal-conditioning components in suitable sensor designs. Its 32-HVQFN package provides 32 terminals in a compact 5 x 5 mm footprint. The exposed-pad implementation also permits the package to transfer heat through the PCB when the board layout provides suitable copper area.
Typical applications include industrial flow measurement, strain-gauge signal acquisition, pressure measurement, temperature sensing, medical monitoring, and compact industrial sensor modules. The combination of 16-bit computation, configurable AFE functions, and low-power operation allows a product to acquire an analog signal, process it, and apply calibration or control functions within one microcontroller.
Designers should select decoupling capacitors according to the manufacturer datasheet, preserve the exposed-pad copper and thermal-via structure, and confirm each analog input's voltage range before routing sensor signals. Firmware should also include startup, calibration, and fault checks appropriate to the measured quantity rather than relying only on nominal conversion results.
This page organizes the exact R5F11CBCGNA#20 ordering information, technical characteristics, family alternatives, comparison points, and application guidance. It also identifies the specific data that must be confirmed in the Renesas datasheet before schematic release, firmware development, or PCB signoff.
جێگرەوەکانی جێگۆڕکێ بۆ R5F11CBCGNA#20 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
R5F11CB2CGN#20
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
R5F11CB3CGN#20
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
R5F11CB4CGN#20
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
R5F11CB6CGN#20
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
R5F11CB7CGN#20
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
R5F11CBCGNA#20 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 16-bit Microcontroller Unit (MCU) |
| Series | RL78/I1E |
| Maximum CPU Frequency | 32 MHz |
| Word Width | 16 bit |
| Flash Memory | 32 KB |
| Analog Front End | Configurable high-precision analog front end |
| مەودای پلەی گەرمیی کارکردن | -40°C to +105°C |
| پاکێج | 32-HVQFN, 5 x 5 mm |
| Terminal Count | 32 terminals |
| جۆری دامەزراندن | Surface Mount |
| Power Technology | Ultra-low power consumption technology |
ڕێنمایی ڕێکخستنی پینی R5F11CBCGNA#20 32-hvqfn, 5 x 5 mm
ڕێکخستنی پین بۆ R5F11CBCGNA#20 (پاکێجی 32-hvqfn, 5 x 5 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ R5F11CBCGNA#20.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
R5F11CBCGNA#20 گونجاوە بۆ 6 بەکارھێنانs: Industrial Flow Measurement, Pressure Transmitter, Strain-Gauge Measurement, Temperature Sensing and Control, Medical Monitoring Equipment, Low-Power Sensor Node.
Industrial Flow Measurement
The R5F11CBCGNA#20 fits industrial flow meters that combine a low-level analog sensor signal with local computation. Its 16-bit RL78/I1E processor can execute at up to 32 MHz, while the configurable high-precision analog front end provides a path for conditioning the measurement before digital processing. The 32 KB of flash supports calibration tables, compensation coefficients, diagnostics, and communication routines without requiring a separate host processor. Its specified -40°C to +105°C range is useful for industrial environments, although the exact excitation scheme, conversion timing, and input limits must follow the manufacturer electrical specifications.
پێشنیارکراو
Pressure Transmitter
A pressure transmitter benefits from the R5F11CBCGNA#20 because its configurable analog front end can participate in a compact signal-conditioning chain for a resistive bridge or ratiometric sensor. The 32 MHz clock provides processing capacity for zero adjustment, temperature compensation, filtering, and output conversion, while 32 KB of flash can hold calibration and configuration data. Low-power technology is advantageous in loop-powered or battery-assisted instruments. The final signal chain still requires checking the datasheet's ADC resolution, input ranges, sampling behavior, and reference accuracy against the required measurement precision.
پێشنیارکراو
Strain-Gauge Measurement
The R5F11CBCGNA#20 is suitable for compact strain-gauge instrumentation in which a small bridge voltage must be amplified, digitized, and compensated close to the sensor. Its configurable analog front end supports an integrated measurement architecture, while the 16-bit, 32 MHz RL78/I1E core can perform zero and gain calibration, linearization, filtering, and alarm logic. The 32-HVQFN 5 x 5 mm package helps reduce board area where space is constrained. For accurate results, design the excitation, reference network, grounding, and analog routing to minimize errors that cannot be removed by firmware.
پێشنیارکراو
Temperature Sensing and Control
The R5F11CBCGNA#20 can implement a temperature-measurement node that converts an analog sensor signal, applies calibration, and controls a heater, fan, or setpoint. Its 32 MHz processing speed supports responsive control calculations, and the configurable analog front end reduces the amount of external conditioning required in suitable designs. The specified -40°C to +105°C operating range covers many industrial and medical ambient environments, although it does not by itself establish the measurement range of the attached sensor. Select external components and the sampling strategy according to the manufacturer's analog and timing guidance.
پێشنیارکراو
Medical Monitoring Equipment
The R5F11CBCGNA#20 is applicable to compact medical monitoring instruments where sensor acquisition, signal processing, and status reporting must coexist in one low-power controller. Its 16-bit processor and configurable high-precision analog front end support measurement-oriented designs, while 32 KB of flash can accommodate acquisition routines, safety checks, and communication protocols. The -40°C to +105°C rating is useful across many product environments, but medical use also requires application-specific quality, regulatory, and risk assessment. Verify electrical limits, isolation requirements, and validation procedures for the finished instrument.
پێشنیارکراو
Low-Power Sensor Node
The R5F11CBCGNA#20 fits battery-operated sensor nodes that periodically acquire analog measurements and communicate their results. The RL78/I1E family's ultra-low-power technology is central to reducing energy consumption between measurement cycles, while the 32 MHz CPU allows data to be filtered and calibrated before transmission. The 32-HVQFN package supports compact PCB construction, and 32 KB of flash provides space for protocol handlers and application logic. Actual battery life depends on the complete system, including sensor excitation, radio activity, regulator efficiency, and the selected MCU operating mode.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ R5F11CBCGNA#20 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | R5F11CB2CGN#20 | R5F11CB3CGN#20 | R5F11CB4CGN#20 | R5F11CB6CGN#20 | R5F11CB7CGN#20 |
|---|---|---|---|---|---|---|
| Manufacturer | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 32-HVQFN (5x5 mm) | 32-HVQFN (5x5 mm) | 32-HVQFN (5x5 mm) | 32-HVQFN (5x5 mm) | 32-HVQFN (5x5 mm) | 32-HVQFN (5x5 mm) |
| CPU Architecture | 16-bit RL78/I1E | 16-bit RL78/I1E | 16-bit RL78/I1E | 16-bit RL78/I1E | 16-bit RL78/I1E | 16-bit RL78/I1E |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
جیاکەرەوە سەرەکییەکان
- Target provides a confirmed 32 KB flash configuration (بەراورد بەR5F11CB2CGN#20)
- Target includes a configurable high-precision analog front end (بەراورد بەR5F11CB3CGN#20)
- Target is specified for a broad industrial temperature range (بەراورد بەR5F11CB4CGN#20)
- Target combines 16-bit processing with a compact 32-HVQFN footprint (بەراورد بەR5F11CB6CGN#20)
تێبینییەکانی دیزاین
Treat the 32-HVQFN footprint as a thermal and high-density routing problem. Follow the manufacturer land pattern for all 32 terminals and the exposed pad, preserve pin-1 orientation, and provide vias connecting the thermal area to an appropriate copper plane. Check paste volume, solder-mask definition, and assembly capability against the package drawing before releasing the PCB.
Route analog sensor inputs away from switching nodes, high-current return paths, and digital clock traces. Use a continuous ground reference, minimize copper area around sensitive inputs, and place the MCU-side bypass capacitors close to their specified power terminals. Separate analog and digital return currents where the board architecture permits, and verify the final grounding strategy against the manufacturer application guidance.
A matching package does not make every RL78/I1E ordering code interchangeable. Before substitution, confirm memory size, analog channel count, peripheral assignments, voltage limits, temperature grade, pin termination, and exposed-pad requirements. For the R5F11CBCGNA#20, also verify ADC input range, reference accuracy, sampling time, and sensor excitation requirements against the system accuracy budget.
Select the system supply and decoupling from the Renesas electrical characteristics rather than from generic 32 MHz MCU assumptions. Account for voltage tolerance, transient response, peripheral current, and the difference between active and low-power operating modes. If the design uses a sensor excitation or analog reference, keep its supply and ground arrangement independent from digital switching currents wherever the application circuit permits.
زانیاری پابەندبوون
Compliance status must be confirmed from the current Renesas product page or declaration for the exact ordering code.