R5F21184SP#U0 - 16-Bit 20MHz R8C MCU | Renesas
MPN: R5F21184SP#U0 ✓ چالاکR5F21184SP#U0 گشتی
An R8C microcontroller is a general-purpose embedded processor based on Renesas Electronics' R8C CPU core. Within the semiconductor hierarchy, it belongs to the microcontroller and embedded-control family rather than a dedicated analog or power-management device. The R8C/1x group combines a 16-bit architecture with flash-based firmware storage in compact packages intended for industrial controls, consumer equipment, instrumentation, and small automation systems.
Key characteristics include a 20 MHz maximum operating frequency, 16-bit processing width, and 16 KB of flash memory. The 2.7 V to 5.5 V operating range allows use in both 3 V and 5 V systems. The integrated four-channel comparator can support threshold detection, signal conditioning, and basic sensor-interface functions without requiring a separate comparator IC for every measurement channel. The Pb-free package designation also supports sourcing plans that avoid lead in the component termination.
The R8C/1x architecture is designed for compact embedded control rather than high-performance application processing. Firmware, peripheral configuration, and interrupt handling determine real-time behavior, while the 16 KB flash capacity places a firm boundary on program size. Engineers should treat memory availability as a design constraint and verify the complete device pin description, electrical limits, and peripheral allocation in the Renesas datasheet before finalizing firmware or board-level connections.
Typical uses include small industrial controllers, sensor-conditioning modules, motor or valve supervisory circuits, programmable timers, and compact consumer-control boards. The comparator channels are particularly useful where analog thresholds must be evaluated beside digital control logic. Applications requiring extensive protocol stacks, large data storage, or high-resolution graphics remain better suited to microcontrollers with substantially more memory and peripheral resources.
For PCB implementation, confirm the 20-pin LSSOP footprint and assign every power, ground, programming, reset, and signal connection according to the manufacturer's pin-description table. Place required decoupling capacitors close to the supply pins and provide a clean, low-impedance ground return. Because the exact exposed thermal-pad arrangement, programming interface, and complete peripheral allocation are not stated on the product listing, use the official datasheet during schematic and layout signoff.
This page combines the principal R8C/1x specifications with practical sourcing, replacement, footprint, and design guidance. It also distinguishes the target ordering code from nearby Renesas variants, helping engineers confirm package, memory, voltage, and temperature requirements before committing a PCB or production BOM.
جێگرەوەکانی جێگۆڕکێ بۆ R5F21184SP#U0 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ R5F21184SP#U0 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Flash Organization, Package, CPU Core, Device Type, Operating Temperature Range.
R5F21184SP#V0
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
R5F21184SP#U0 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 16-bit R8C microcontroller |
| CPU Family | R8C/1x |
| CPU Word Size | 16 bit |
| Maximum Operating Frequency | 20 MHz |
| Flash Program Memory | 16 KB |
| Flash Organization | 16K x 8 |
| ڤۆڵتاژی دابینکردنی کارکردن | 2.7 V to 5.5 V |
| Supported Supply Class | 3 V and 5 V |
| Integrated Comparator Channels | 4 channels |
| مەودای پلەی گەرمیی کارکردن | -20 C to +85 C |
| Package Type | 20-LSSOP |
| Package Designation | PLSP0020JB-A |
| Lead-Free Status | Pb-free |
ڕێنمایی ڕێکخستنی پینی R5F21184SP#U0 plsp0020jb-a
ڕێکخستنی پین بۆ R5F21184SP#U0 (پاکێجی plsp0020jb-a). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ R5F21184SP#U0.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
R5F21184SP#U0 گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor and Threshold Control, Programmable Timer and Sequencer, Small Motor and Valve Supervisor, Embedded Data Acquisition Module, Smart Home Interface Module, Consumer Control and Appliance Interface.
Industrial Sensor and Threshold Control
The R5F21184SP#U0 fits compact sensing modules that compare external analog signals against programmed thresholds. Its four comparator channels provide dedicated threshold-detection functions, while the 16-bit R8C CPU core runs control and communication logic at up to 20 MHz. The device operates from 2.7 V to 5.5 V, allowing it to share either 3 V or 5 V system rails. Place the comparator inputs close to their source circuits, maintain short analog return paths, and isolate digital switching from sensitive threshold nodes. Firmware should debounce or filter transitions before acting on comparator events.
Programmable Timer and Sequencer
The R5F21184SP#U0 is appropriate for sequential timers, interval counters, and small process controllers that require deterministic embedded logic. Its 20 MHz operating frequency supports responsive interrupt-driven control, and 16 KB of flash provides space for timing tables, state machines, and diagnostic routines. The 2.7 V to 5.5 V range permits deployment in both 3 V and 5 V control boards. Validate the exact timer channels, cascaded counting modes, and interrupt priorities in the manufacturer datasheet before assigning time-critical tasks, and use crystal or clock settings appropriate to the required timing tolerance.
Small Motor and Valve Supervisor
The R8C/1x MCU can supervise low-power motors, valves, relays, and actuators where a full high-performance MCU would be unnecessary. The 20 MHz CPU supports responsive state-machine control, while the four comparator channels can monitor feedback or supply-related thresholds. The R5F21184SP#U0 works across 2.7 V to 5.5 V, so a 5 V industrial control board can use the same controller. Keep inductive loads and high-current switching stages physically separate from the MCU, provide suitable driver transistors and protection, and define safe states for reset, brownout, and firmware faults.
Embedded Data Acquisition Module
The R5F21184SP#U0 is suitable for compact data-acquisition front ends that require local threshold decisions before forwarding information to a host processor. Four comparator channels can supervise sensor limits, while the 16-bit CPU core handles sampling sequencing, filtering, and status reporting. The 16 KB flash limit makes efficient firmware organization important, particularly when protocols, data logging, and diagnostics share the same program memory. Confirm the available RAM, peripheral resources, and serial interfaces in the manufacturer documentation before defining the acquisition architecture.
Smart Home Interface Module
The R5F21184SP#U0 can serve as the local controller in a smart-home interface that handles push buttons, indicators, sensor thresholds, and actuator commands. Its 2.7 V to 5.5 V supply range supports common low-voltage nodes, and the 20 MHz R8C core provides more than enough control bandwidth for typical discrete I/O tasks. Four comparator channels reduce the need for separate threshold devices in suitable low-current interfaces. Confirm the complete I/O and timer allocation before design freeze, and include debounce, watchdog, and fail-safe output states in the firmware architecture.
Consumer Control and Appliance Interface
The R5F21184SP#U0 is well matched to compact appliance controls that coordinate buttons, displays, heaters, indicators, and safety monitoring in a 3 V or 5 V environment. The 16 KB flash capacity supports a focused control program, and the 20 MHz CPU allows responsive event handling. The Pb-free construction supports modern production sourcing. Firmware organization should preserve space for boot, diagnostics, and future options, while the hardware design must follow the exact power, reset, programming, and ground connections in the Renesas pin description.
داتای سەرچاوەی ئەندازیاری بۆ R5F21184SP#U0 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | R5F21184SP#V0 |
|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics |
| Package | 20-LSSOP | 20-LSSOP family variant |
| Product Type | 16-bit R8C microcontroller | 16-bit R8C microcontroller |
| Maximum Operating Frequency | 20 MHz | 20 MHz |
| Flash Program Memory | 16 KB | 16 KB |
| Operating Supply Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Comparator Channels | 4 channels | 4 channels |
| Lead-Free Construction | Pb-free | Pb-free |
جیاکەرەوە سەرەکییەکان
- Larger program memory than the lower-memory R8C comparison part (بەراورد بەR5F211B1DSP#U0)
- Direct family ordering candidate for footprint-focused designs (بەراورد بەR5F21184SP#V0)
- Four-channel threshold sensing alongside embedded control (بەراورد بەR5F211B1DSP#U0)
تێبینییەکانی دیزاین
Use the official 20-pin LSSOP land pattern and verify pin 1 orientation against the package drawing. Place the required input and output capacitors close to their associated device pins, with the shortest practical return to the ground plane. Comparator inputs are sensitive to coupling from digital and switching nodes, so route them away from high-current edges and keep the analog source impedance and grounding arrangement consistent with the input-network recommendations in the manufacturer datasheet.
The 2.7 V to 5.5 V operating range supports 3 V and 5 V designs, but the rail must remain within all specified operating and absolute-maximum limits. Confirm the device's detailed current consumption under active, wait, and peripheral operating conditions before sizing the regulator and bypass network. Account for comparator current, processor activity, and attached digital loads rather than estimating from the maximum clock frequency alone.
Do not treat a lower-flash R8C device as an automatic replacement for the R5F21184SP#U0. The R5F211B1DSP#U0, for example, is identified with 4 KB rather than 16 KB of flash, creating a 12 KB program-memory reduction. Recheck the memory map, vector table, linker output, peripheral allocation, and any firmware features that depend on the larger memory configuration. A physical package match alone does not establish firmware compatibility.
Separate analog comparator routing from clock, programming, and high-speed digital paths. Keep comparator traces short, avoid sharing narrow traces with switching-node currents, and provide a continuous ground reference where possible. If the microcontroller drives relays, LEDs, or motor-control stages through external devices, route those currents away from the MCU supply and comparator-return paths. Review the final board with the manufacturer pin description and application guidance before fabrication.
زانیاری پابەندبوون
The product listings explicitly identify the R5F21184SP#U0 as Pb-free. Separate RoHS, REACH, halogen-free, conflict-minerals, and AEC-Q100 declarations are not stated, so those statuses remain unknown.