Renesas Electronics

R5F211A2NP#U0 - 16-Bit 20MHz R8C Microcontroller | Renesas

MPN: R5F211A2NP#U0 ✓ چالاک
3 V Vdss 28-HWQFN (5 mm x 5 mm) Package 20 MHz Speed 8 KB (8K x 8) Memory
MOQ: 1 |

R5F211A2NP#U0 گشتی

Renesas Electronics R5F211A2NP#U0 is a 16-bit R8C single-chip microcontroller operating at up to 20 MHz, with 8 KB of flash program memory, 512 bytes of RAM, and a 3 V to 5.5 V supply range. The device is supplied in a 28-HWQFN surface-mount package measuring 5 mm by 5 mm.

A microcontroller is a semiconductor integrated circuit that combines a processor core, program memory, data memory, and peripheral interfaces on one device. The R8C core belongs to the broader microcontroller, embedded-processor, and semiconductor hierarchy. It is intended for compact control systems where local processing, serial communication, timers, analog input, and digital I/O must coexist within a constrained board area and power budget.

The R5F211A2NP#U0 combines a 16-bit architecture with 8 KB of flash memory and a maximum stated clock frequency of 20 MHz. Its 512 bytes of RAM support working data and stack operations, while the flash program area permits embedded firmware to be retained in the device. The 3 V to 5.5 V operating range allows operation from common low-voltage rails, although each external circuit must remain within the limits defined in the manufacturer documentation.

Renesas identifies the component as an R8C/1x/1A-series device in a 28-pin HWQFN package. The package supports surface-mount assembly and provides a compact alternative to larger leaded microcontrollers. Its small footprint is especially useful in space-constrained controls, but exposed-pad layout, thermal management, and assembly requirements must be checked against the package drawing before PCB release.

Typical uses include industrial control modules, compact instrumentation, appliance controllers, sensor interfaces, communication equipment, and low-power embedded products. The device can serve as a local supervisory controller for sensors, communication transceivers, and actuator interfaces, provided the selected peripheral functions match the exact package and device variant.

Before designing a PCB, assign every pin from the R5F211A2NP pin-description table, confirm the exposed-pad connection, and follow the recommended power, decoupling, clock, programming, and reset layouts. Verify the detailed peripheral inventory and electrical limits in the manufacturer datasheet because the package code and ordering suffix must remain unchanged for a true second-source comparison.

This product page combines the official Renesas device information with distributor technical summaries and practical selection guidance. It also distinguishes verified drop-in alternatives from broader functional equivalents, helping engineers identify candidates without overlooking package, firmware, and pin-assignment constraints.

جێگرەوەکانی جێگۆڕکێ بۆ R5F211A2NP#U0 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ R5F211A2NP#U0 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە CPU Core, Package, Product Type, Supply Voltage Range.

Renesas Electronics
CPU Core: R8C 16-bit core
Supply Voltage Range: 3 V to 5 V
بەراوردکردن لەگەڵ R5F211A2NP#U0 →
Renesas Electronics
CPU Core: R8C
Package: 20-LSSOP (PLSP0020JB-A)
Product Type: 16-bit microcontroller IC
بەراوردکردن لەگەڵ R5F211A2NP#U0 →

هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.

داوای جێگرەوەکان بکە

R5F211A2NP#U0 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type 16-bit single-chip microcontroller
CPU Core Renesas R8C
Series R8C/1x/1A
CPU Word Length 16 bit
زۆرترین فرێکوێنسیی کاتژمێر 20 MHz
Flash Program Memory 8 KB (8K x 8)
RAM 512 bytes
Minimum Operating Voltage 3 V
Maximum Operating Voltage 5.5 V
پاکێج 28-HWQFN (5 mm x 5 mm)
جۆری دامەزراندن Surface mount
ژمارەی پین 28 pins

ڕێنمایی ڕێکخستنی پینی R5F211A2NP#U0 28-hwqfn (5 mm x 5 mm)

ڕێکخستنی پین بۆ R5F211A2NP#U0 (پاکێجی 28-hwqfn (5 mm x 5 mm)). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 28-hwqfn (5 mm x 5 mm) بۆ R5F211A2NP#U0

هیچ داتای وردی پینئاوت بەردەست نییە بۆ R5F211A2NP#U0.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

R5F211A2NP#U0 گونجاوە بۆ 6 بەکارھێنانs: Compact Industrial Control Module, Sensor Interface and Signal Conditioning, Appliance and Equipment Controller, Communication Equipment Interface, Battery-Powered Embedded Instrument, Programmable Logic and System Support.

🏭

Compact Industrial Control Module

The R5F211A2NP#U0 suits a compact control module that must process sensor states and operate communication or actuator interfaces locally. Its 16-bit R8C core operates up to 20 MHz, providing more arithmetic width than an 8-bit controller, while 8 KB of flash accommodates the control firmware and 512 bytes of RAM holds working variables. The 28-HWQFN 5 mm by 5 mm package limits board area without changing the embedded-control architecture. The primary engineering check is peripheral availability: verify timers, serial channels, analog functions, interrupt assignments, and package-level pin multiplexing in the R5F211A2NP documentation before selecting it.

🧩

Sensor Interface and Signal Conditioning

The R5F211A2NP#U0 can act as the supervisory processor in a sensor interface assembly where digital sensing, switching, and status reporting must be combined in a small footprint. A 20 MHz R8C core can service timed acquisition routines, while the 8 KB flash area stores configuration logic and 512 bytes of RAM supports temporary measurement data. Its 3 V to 5.5 V range supports common embedded supply rails, but analog input voltage range, resolution, channel count, sampling behavior, and sensor interfaces must be checked for the exact device variant. PCB implementation should keep sensitive analog routing away from switching nodes and follow the manufacturer’s decoupling and grounding recommendations.

🔧

Appliance and Equipment Controller

For appliance and equipment control, the R5F211A2NP#U0 combines local logic processing with a compact package suited to cost- and space-sensitive assemblies. Its 16-bit architecture and 20 MHz operating capability support responsive state-machine control, key scanning, timers, and communication handling. The 8 KB flash provides a constrained but practical code budget, while 512 bytes of RAM requires disciplined buffer and stack sizing. Before committing to the controller, map every required load, input, relay-drive, and serial function to the available pins. Confirm output drive limits, isolation requirements, thermal performance, and any safety-certification obligations at the finished-equipment level.

🌐

Communication Equipment Interface

The R5F211A2NP#U0 is applicable to a communication-equipment interface that needs a local supervisory MCU alongside a network or serial transceiver. Its 20 MHz maximum clock rate supports protocol handling and background control tasks, and the R8C core provides a 16-bit processing path for simple framing, filtering, and status management. The device is not suitable for an assumed network protocol until the exact UART, SPI, or other serial peripheral configuration and electrical levels are confirmed. Use the manufacturer pin and peripheral tables to reserve programming, reset, clock, and transceiver-control signals, then validate timing under the intended baud rate and operating voltage.

⚡

Battery-Powered Embedded Instrument

The R5F211A2NP#U0 can serve as the controller in a battery-powered embedded instrument when its operating current fits the available energy budget. Its low-voltage 3 V to 5.5 V operating range is compatible with common battery-derived rails after regulation, and the 20 MHz R8C core can perform measurement sequencing and control functions. The decisive design step is to compare active, idle, and standby current against the manufacturer timing tables; these values are not established by the available product summary. Firmware should use the lowest clock and peripheral settings that meet response requirements, while the PCB provides local decoupling and controlled leakage paths.

🖥️

Programmable Logic and System Support

The R5F211A2NP#U0 is useful as a supervisory controller for a board containing programmable logic, relays, indicators, and local diagnostics. Its 8 KB flash and 512 bytes of RAM are appropriate for startup coordination, configuration, monitoring, and simple communication rather than a large application workload. The 16-bit CPU at up to 20 MHz can manage deterministic control tasks, but timing margins must be evaluated against logic delays and interrupt latency. The 28-HWQFN footprint helps reduce board area, although exposed-pad soldering and thermal design require careful assembly planning. Use the pin-description table to establish programming access, reset behavior, and all peripheral multiplexing before fabrication.

What is the R5F211A2NP#U0?
The R5F211A2NP#U0 is a Renesas Electronics 16-bit R8C single-chip microcontroller with a maximum clock frequency of 20 MHz, 8 KB of flash program memory, and 512 bytes of RAM. According to the official Renesas product page and distributor technical listing, it belongs to the R8C/1x/1A series and is packaged for surface-mount assembly in a 28-HWQFN package measuring 5 mm by 5 mm.
What are the key specifications of R5F211A2NP#U0 that engineers should know?
The key R5F211A2NP#U0 specifications are a 16-bit R8C CPU core, 20 MHz maximum operating frequency, 8 KB of flash memory, 512 bytes of RAM, and a 3 V to 5.5 V supply range. The manufacturer and distributor listings identify a 28-HWQFN 5 mm by 5 mm surface-mount package. Peripheral counts, pin functions, temperature limits, and detailed timing characteristics should be confirmed in the R5F211A2NP datasheet before design release.
What can replace the R5F211A2NP#U0?
No verified drop-in replacement for the R5F211A2NP#U0 was identified from the available Renesas, distributor, and cross-reference results. A replacement should not be selected by CPU frequency or memory size alone: it must match the 28-HWQFN footprint, pin assignments, power architecture, programming method, peripheral set, and R8C firmware requirements. Use the Request a Quote form on this page for sourcing assistance, and require pin-level confirmation before approving a substitute.
Where can I download the R5F211A2NP#U0 datasheet PDF?
The R5F211A2NP#U0 datasheet and device documentation are available through the official Renesas product page linked on this page. The manufacturer page is the preferred source because it identifies the exact R8C/1x/1A device and supports direct access to current technical documentation. Use the package pin-description table, electrical-characteristics tables, and application guidance when designing or reviewing a PCB.
Where can I find the R5F211A2NP#U0 pinout?
The R5F211A2NP#U0 pinout is defined in the manufacturer R5F211A2NP datasheet, using the 28-HWQFN package drawing and pin-description table. Begin with pin 1, follow the package's counter-clockwise numbering, and preserve the exposed-pad requirement shown in the land-pattern data. Do not infer an equivalent pin assignment from another R8C member because package suffix codes can change available functions.
Is R5F211A2NP#U0 suitable for a 5 V embedded control design?
Yes, the R5F211A2NP#U0 is suitable for a 5 V embedded-control design when the complete system remains within its stated 3 V to 5.5 V operating range. The device combines a 16-bit R8C core, 20 MHz maximum clock frequency, 8 KB of flash, and 512 bytes of RAM. Verify I/O limits, timing, reset behavior, peripheral availability, and absolute maximum ratings in the datasheet before connecting external signals.
What is the difference between R5F211A2NP#U0 and a generic 16-bit microcontroller?
The R5F211A2NP#U0 is specifically tied to the Renesas R8C/1x/1A architecture, 20 MHz operating class, 8 KB flash configuration, and 28-HWQFN footprint. A generic 16-bit MCU may match word length but differ in peripheral mapping, interrupt behavior, memory architecture, startup procedure, and development-tool requirements. Treat a generic device as an alternative only after confirming electrical, pin, software, and qualification compatibility.
When should I choose R5F211A2NP#U0 instead of another R8C microcontroller?
Choose the R5F211A2NP#U0 when the design specifically requires its R8C/1x/1A implementation, 20 MHz maximum frequency, 8 KB flash, 512 bytes of RAM, 3 V to 5.5 V operation, and 28-HWQFN 5 mm by 5 mm footprint. Another R8C model should be selected only when it offers required peripherals, memory, package features, or qualification without requiring a layout change.
Is R5F211A2NP#U0 the same as R5F211B2SP#U0?
The R5F211B2SP#U0 is not established as a drop-in equivalent for the R5F211A2NP#U0. Although both belong to the R8C family, the SP package code and the A-versus-B device designation indicate that package and device-specific details must be checked. A true substitution requires the same 28-HWQFN footprint, compatible pin mapping, equivalent supply characteristics, compatible peripherals, and a compatible firmware path.
Can R5F211A2NP#U0 be used in industrial control equipment?
The R5F211A2NP#U0 can be evaluated for industrial control equipment because it provides a 16-bit R8C core, 20 MHz maximum frequency, 8 KB flash, and 512 bytes of RAM. Industrial suitability also depends on the device's specified temperature range, EMC performance, system certifications, and long-term availability, which must be confirmed from the manufacturer documentation before deployment.
How much power does the R5F211A2NP#U0 consume?
The R5F211A2NP#U0 operating and standby current are not stated in the available product summaries. Power consumption depends on supply voltage, clock configuration, active peripherals, I/O activity, and the selected operating mode, so it should be calculated from the datasheet current tables for the exact firmware state. Do not use the 3 V to 5.5 V supply range as a substitute for a current specification.
Where to buy R5F211A2NP#U0 online?
Use the Request a Quote form on this page to request current R5F211A2NP#U0 availability, lot conditions, and order handling. The exact ordering code includes the #U0 suffix, so submit that full MPN with the request. Distributor search pages can show historical availability, but a quotation confirmation is required for current stock, lead time, and delivery details.
What is the price of R5F211A2NP#U0?
The current price for R5F211A2NP#U0 is not published as a verified quantity-break schedule on this page. Request a quote through the Request a Quote form on this page with the required quantity, target date, and packaging preference. The form can provide a current commercial response while preserving the exact full MPN and any traceability requirements.
What is the lead time for R5F211A2NP#U0?
The current lead time for R5F211A2NP#U0 must be confirmed at the time of quotation because the available product summaries do not state a guaranteed lead-time schedule. Use the Request a Quote form on this page and include your required quantity, production date, and delivery destination. Confirm whether the offered units are factory-new and whether any date remains subject to manufacturing or distribution updates.
Is R5F211A2NP#U0 in stock?
Current stock for R5F211A2NP#U0 should be confirmed through the Request a Quote form on this page. The manufacturer page presents the exact device as orderable, but that alone does not establish a guaranteed quantity available for an individual order. Provide the required quantity and target date so the sourcing team can return a current availability and lead-time response.

داتای سەرچاوەی ئەندازیاری بۆ R5F211A2NP#U0 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the R5F211A2NP#U0 when a design specifically requires the Renesas R8C/1x/1A platform, a 16-bit CPU operating up to 20 MHz, 8 KB of flash, 512 bytes of RAM, a 3 V to 5.5 V supply range, and a compact 28-HWQFN footprint. It is particularly suitable for compact controllers, sensor-interface modules, appliances, communication interfaces, and portable instruments where established R8C firmware and tools are valuable. Before selecting it, verify that the required timers, serial interfaces, analog functions, interrupt resources, and programming signals are present in this exact package. A different R8C device may be preferable when more memory or a different peripheral set is needed, provided the layout and software are intentionally redesigned. No verified drop-in alternative was identified, so do not approve a substitute based only on CPU word length, clock speed, or package dimensions. Require pin-level, electrical, firmware, qualification, and lifecycle review before changing the selected MPN.

تێبینییەکانی دیزاین

Design the supply network for the stated 3 V to 5.5 V operating range and place the required bypass capacitors at the supply and ground pins using the manufacturer layout guidance. Confirm startup, reset, and operating-mode current from the datasheet because the available product summary does not state active or standby consumption. Avoid relying on nominal rail voltage alone; account for supply tolerance, transient response, and the voltage needed by attached peripherals.

Use the official 28-HWQFN footprint and exposed-pad land pattern rather than a generic QFN drawing. The 5 mm by 5 mm package is compact, but pad and mask dimensions, paste volume, solder-mask clearance, and exposed-pad vias must match the assembly process. Check the pin-description table during schematic review so every multiplexing option and programming signal is assigned before board release.

Separate clock, programming-interface, and communication routes from sensitive analog inputs where practical. Keep traces short, provide a continuous ground reference, and place local decoupling close to the relevant pins. If the controller monitors sensors through external converters, maintain guarded analog routing and isolate high-current switching paths. These measures reduce coupling that could disturb timing, measurements, or communications.

Do not treat another R8C microcontroller as a drop-in substitute solely because it uses a similar core family. Confirm the exact 28-HWQFN pin mapping, 8 KB flash, 512 bytes of RAM, peripheral mix, operating voltage, programming interface, and ordering code. Also check the 339-page R5F211A2NP datasheet identity through the official Renesas page, because package suffix changes and related family members may have different pin functions.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The verified product summaries do not state the requested compliance or qualification results. Confirm these attributes in the manufacturer documentation before using the device in regulated or automotive applications.

داتا پشتڕاستکراوەتەوە لە: 2026-11-05 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

R5F211A2NP#U0 R5F211A2NP#U0 datasheet R5F211A2NP#U0 pinout R5F211A2NP#U0 datasheet pdf R5F211A2NP#U0 equivalent R5F211A2NP#U0 replacement R5F211A2NP#U0 price R5F211A2NP#U0 stock Renesas R5F211A2NP#U0 R5F211A2NP#U0 footprint R5F211A2NP#U0 schematic R5F211A2NP#U0 vs R5F211B2SP#U0

پێکهاتە و زاراوە پەیوەندیدارەکان

Renesas Electronics R5F211A2NP#U0 R5F211A2NP R5F211B2SP#U0 R8C CPU core 16-bit microcontroller single-chip microcomputer embedded processor semiconductor integrated circuit R8C/1x/1A series flash program memory RAM 28-HWQFN HWQFN package QFN package family surface-mount technology SMD 20 MHz clock frequency 3 V to 5.5 V operating supply industrial control sensor interface communication equipment battery-powered instrumentation appliance control
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ