R5F64178PFB - 32-Bit 50MHz 768KB Flash MCU | Renesas | LQFP-100
MPN: R5F64178PFB ✓ چالاکR5F64178PFB گشتی
A microcontroller is a programmable semiconductor that integrates a CPU core, flash memory, RAM, timers, serial interfaces, analog and digital peripherals, and interrupt control on one integrated circuit. Within the semiconductor hierarchy, the R5F64178PFB is a 32-bit MCU, which is a type of embedded controller used for real-time acquisition, monitoring, and control. Its 768 KB flash capacity provides substantially more program storage than small general-purpose MCUs, supporting larger state machines, protocol stacks, and application logic.
The most prominent verified specifications are 32-bit processing, a listed maximum clock frequency of 50 MHz, 768 KB of flash memory, a 3 V to 5.5 V supply range, and a 100-pin LFQFP package with 0.50 mm pin pitch. The 14 mm by 14 mm package provides a large pin count that can support multiple I/O resources and dedicated peripheral connections. One distributor indexing source lists 16 MHz for the clock speed, so the final operating clock must be confirmed against the applicable Renesas hardware manual and device configuration data before design release.
Typical applications include industrial automation controllers, factory data-acquisition equipment, motor and process-control systems, communications equipment, and embedded instruments. Its combination of program storage, peripheral integration, and a 100-pin package makes it suitable where a compact single-board controller must handle both control logic and external interfaces. System designers should also verify peripheral assignments, timing, electrical limits, and pin multiplexing in the Renesas documentation.
A key design consideration is package and firmware compatibility. Before substituting another R32C/100 device, engineers must confirm the exact pinout, memory configuration, peripheral set, clock requirements, operating temperature range, and software support. The 0.50 mm pitch also demands a capable assembly process and careful PCB layout, including short escape routes and adequate exposed thermal performance where the package thermal data supports it.
This page consolidates verified distributor specifications, package information, lifecycle status, sourcing links, and cautious replacement guidance. It also distinguishes confirmed device facts from parameters that still require verification, helping engineers shorten component-selection and PCB-review cycles without treating an incomplete distributor index as a substitute for the manufacturer documentation.
جێگرەوەکانی جێگۆڕکێ بۆ R5F64178PFB — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ R5F64178PFB (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Flash Memory, Package Dimensions, Package Material.
R5F64176PFB
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →R5F64175PFB
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →R5F64178PFB#2B
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
R5F64178PFB#U0
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
R5F64178PFB#UC
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
R5F64178PFB#UB
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
R5F64178PFB زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | 32-bit Microcontroller (MCU) |
| Series | R32C/100 |
| Processor Architecture | 16/32-bit |
| Maximum Clock Speed | 50 MHz |
| Program Memory Type | Flash |
| Program Memory Capacity | 768 KB (768K x 8) |
| Supply Voltage Range | 3 V to 5.5 V |
| Package Type | 100-LFQFP |
| Package Dimensions | 14 mm x 14 mm |
| Package Pitch | 0.50 mm |
| Package Material | Plastic LQFP |
| جۆری دامەزراندن | Surface Mount |
| دۆخی چرخەی ژیان | Active |
| Core Family | Renesas M16C/R32C/100 family |
ڕێنمایی ڕێکخستنی پینی R5F64178PFB plastic lqfp
ڕێکخستنی پین بۆ R5F64178PFB (پاکێجی plastic lqfp). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ R5F64178PFB.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
R5F64178PFB گونجاوە بۆ 6 بەکارھێنانs: Industrial Automation Controller, Factory Data-Acquisition System, Motor and Process Control, Embedded Communications Equipment, Precision Instrumentation, General-Purpose Embedded Control Board.
Industrial Automation Controller
The R5F64178PFB fits an industrial automation controller that requires more program storage and I/O capacity than a small 8-bit MCU. Its verified 32-bit R32C/100 architecture, listed 50 MHz maximum clock, and 768 KB of flash support larger control logic, sequencing tables, and communication routines. The 100-pin LQFP provides a substantial connection count for digital I/O, communications, and control signals. In such a design, the MCU would execute machine-state logic, coordinate sensors and actuators, and supervise safety-related interlocks at the system level. Before release, verify timer channels, isolation requirements, ADC performance, operating temperature, and exact peripheral multiplexing in the Renesas hardware manual.
پێشنیارکراو
Factory Data-Acquisition System
R5F64178PFB is suitable for a factory data-acquisition system that must collect sensor information, apply calibration, and transfer results through industrial communications. The verified 768 KB flash capacity can hold acquisition tables, conversion routines, protocol handlers, and logging logic, while the listed 50 MHz clock provides processing headroom for active control. Its 100-pin package can expose multiple digital inputs, communications interfaces, and external memory or peripheral connections. The critical design checks are converter resolution, sampling rate, input voltage limits, channel multiplexing, and communication timing. The supplied data does not specify the ADC or peripheral inventory, so those functions must be confirmed rather than inferred from the model name.
پێشنیارکراو
Motor and Process Control
The R5F64178PFB can serve as the central controller in a motor or process-control subsystem because it combines 32-bit processing, 768 KB of flash, and a 100-pin package in one device. These verified characteristics support motion-state sequencing, proportional control calculations, event logging, and coordination of external power stages. A practical implementation would use the MCU for command decoding, timer-based sequencing, fault detection, and communications with a drive or supervisory controller. Selection must account for control-loop latency, timer resolution, PWM resources, analog measurement performance, and isolation from motor transients. Because those electrical and timing details are absent from the supplied excerpts, they remain datasheet-verification items before schematic and firmware approval.
پێشنیارکراو
Embedded Communications Equipment
R5F64178PFB is a potential fit for embedded communications equipment that requires dedicated protocol processing alongside general-purpose control. Its listed 32-bit core, 50 MHz maximum clock, and 768 KB flash provide resources for framing, addressing, buffering, diagnostics, and higher-layer protocols. The 100-pin package also offers more signal assignments than compact small-outline MCUs, potentially supporting multiple serial interfaces, status indicators, and external transceiver connections. Actual suitability depends on the availability and electrical rating of UART, SPI, CAN, or other interfaces, which are [DATA_NEEDED] in the supplied data. Engineers should verify baud-rate support, peripheral instances, pin assignments, protocol licensing, and clock tolerance against the applicable Renesas documentation before selecting the device.
پێشنیارکراو
Precision Instrumentation
The R5F64178PFB is suitable for embedded instrumentation when a controller needs more flash space and I/O than a basic MCU. The verified 768 KB program memory can support calibration tables, measurement sequences, configuration menus, and data-processing code, while the listed 50 MHz clock supports responsive control. In a measurement instrument, the device could coordinate sensor inputs, digitize or supervise readings, process results, and drive a local communications interface. Selection should focus on ADC accuracy, analog input count, reference quality, timing jitter, timer resolution, and low-noise layout because these parameters are not stated in the supplied records. Firmware should also use the Renesas peripheral library and startup package appropriate to the exact device suffix.
پێشنیارکراو
General-Purpose Embedded Control Board
R5F64178PFB works as a general-purpose embedded control board controller for prototypes and production equipment requiring substantial software and pin resources. Its verified 32-bit R32C/100 identity, 768 KB flash, and 100-LFQFP footprint support real-time multitasking, peripheral integration, and product-specific control functions. A board built around this MCU can expose digital I/O, sensor interfaces, communications ports, and expansion headers while keeping the processor package compact at 14 mm by 14 mm. The main hardware constraints are 0.50 mm package pitch, routing density, thermal performance, and decoupling. Designers must confirm the pin table, power requirements, clock components, bootloader method, and peripheral resources because those details are not included in the verified search excerpts.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ R5F64178PFB — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | R5F64176PFB | R5F64175PFB | R5F64178PFB#2B | R5F64178PFB#U0 | R5F64178PFB#UC |
|---|---|---|---|---|---|---|
| Package | LQFP-100, 14 mm x 14 mm | LQFP-100 | LQFP-100 | LQFP-100 | LQFP-100 | LQFP-100 |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
جیاکەرەوە سەرەکییەکان
- Large verified flash allocation for embedded control (بەراورد بەR5F64176PFB)
- Distributor-verified 50 MHz maximum listing (بەراورد بەR5F64178PFB#UC)
- Complete ordering-code identification in distributor records (بەراورد بەR5F64178PFB#2B)
تێبینییەکانی دیزاین
The verified package is a 100-pin LQFP with 0.50 mm pitch on a 14 mm by 14 mm body. Route power, ground, clock, and reset first, keep sensitive analog paths away from switching nodes, and provide local decoupling at every supply pin according to the manufacturer layout guidance. Because the supplied data does not include the pin table, do not finalize pad assignments or fanout until the official package drawing and electrical requirements have been checked.
Do not assume that every R5F64178PFB suffix is electrically identical. The verified distributor records associate #U0, #2B, #UC, and #UB with the base R32C/100 family, but their suffix fields are not defined in the supplied excerpts. Confirm ordering code, temperature grade, flash configuration, clock setting, packaging, and shipment form against the Renesas ordering guide before releasing a BOM or approving a substitute.
The verified supply range is 3 V to 5.5 V, but individual rails and peripherals may have tighter limits. Design the power tree to keep the MCU within its documented operating range during startup, reset, sleep transitions, and maximum-load conditions. Validate input ramp behavior, decoupling capacitance, analog-reference stability, and brownout behavior against the Renesas hardware manual; none of those detailed values is available in the supplied excerpts.
Clock and debug signals require controlled routing even when the listed maximum frequency is 50 MHz. Keep the clock path short, provide a continuous reference plane, avoid splitting beneath the device, and observe any oscillator or PLL layout requirements in the manufacturer guidance. External interfaces should include appropriate protection and termination where cable lengths or edge rates demand them. Final timing margins must be calculated using verified peripheral and timing parameters.
زانیاری پابەندبوون
The supplied cross-reference snippets mention RoHS and REACH as comparison fields but provide no extracted compliance conclusions. No compliance status has been inferred. AEC-Q100 qualification is unknown because the device is presented as an industrial microcontroller rather than an explicitly automotive-qualified part.