SI2400-BS 2.4 kbps ISOmodem IC | Skyworks Solutions
MPN: SI2400-BS ✓ چالاکSI2400-BS گشتی
The SI2400-BS consolidates legacy serial modem functionality into a compact surface-mount device. Its highest supported data rate is 2400 bps, while V.21 and Bell 103 provide lower-rate operation and V.22, V.23, Bell 212A, and V.22bis provide additional protocol compatibility. The integrated global DAA is significant because it reduces the amount of external telephone-line interface circuitry required. Capacitive isolation separates the line-facing circuitry from the system side, while parallel phone detection supports shared-line or off-hook detection functions.
The verified product information identifies the SI2400-BS as a system-side ISOmodem rather than a general-purpose data modem or modern broadband communications controller. Its 16-SOIC body measures 3.90 mm wide in the standard 0.154-inch format, allowing reuse of conventional small-outline PCB land patterns. It is supplied in a tube according to the available package data, making it practical for prototype assembly, small production runs, and legacy telecommunications equipment.
Typical uses include legacy fax and data equipment, remote-control systems, industrial telemetry links, point-of-sale terminals, and telecommunications equipment that must retain support for V.21, V.22, V.23, Bell 103, or Bell 212A connections. Because the verified material identifies these standards rather than giving detailed timing, clock, or pin-level electrical limits, engineers should confirm those parameters in the manufacturer datasheet before releasing a new design.
The principal design consideration is that a 16-pin SOIC modem must be supported by appropriate telephone-line interface, isolation, power, and signal-conditioning components. Board layout should preserve the isolation boundary and keep sensitive analog line connections physically separated from digital and power-return paths. Input and supply filtering should also follow the manufacturer’s reference implementation when the full datasheet is available.
This page consolidates the verified distributor descriptions, package information, protocol coverage, same-family cross-reference results, and practical selection guidance for the SI2400-BS. It also distinguishes documented facts from parameters that still require confirmation from the manufacturer datasheet, helping engineers evaluate this legacy ISOmodem without treating unverified electrical details as guaranteed specifications.
جێگرەوەکانی جێگۆڕکێ بۆ SI2400-BS — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ SI2400-BS (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Product Type, Mounting Type, Package, Lead-Free Status, Package Width.
SI2400-FS
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →SI2400-KS
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →SI2400-BS تایبەتمەندییەکان
| Product Type | ISOmodem system-side interface IC |
| Maximum Data Rate | 2400 bps |
| Supported Protocol | V.22bis |
| Additional Data Formats | V.21, V.22, V.23, Bell 103, Bell 212A |
| Supply Voltage Range | 3 V to 5.25 V |
| DAA Integration | Integrated global DAA |
| Isolation Technology | Capacitive isolation |
| Phone Detection | Parallel phone detect |
| Line Interface | Globally compliant line interface |
| پاراستن لە تێکچوونی ئێستا | Supported |
| پاکێج | 16-SOIC |
| Package Width | 3.90 mm (0.154 inch) |
| جۆری دامەزراندن | Surface mount |
| ژمارەی پینەکان | 16 pins |
| Packaging | Tube |
| Lead-Free Status | Lead free |
| Fast Connect Support | V.25 Fast Connect |
| Reversing Support | V.23 reversing |
| Security Protocols | SIA and other security protocols |
ڕێنمایی ڕێکخستنی پینی SI2400-BS 3.90 mm (0.154 inch)
ڕێکخستنی پین بۆ SI2400-BS (پاکێجی 3.90 mm (0.154 inch)). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ SI2400-BS.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
SI2400-BS گونجاوە بۆ 6 بەکارھێنانs: Legacy Fax Equipment, Industrial Telemetry Terminals, Point-of-Sale Terminals, Remote Monitoring and Control, Data Communication Equipment, Shared-Line Telephone Products.
Legacy Fax Equipment
The SI2400-BS fits legacy fax systems that require backward-compatible modem signaling and a 2400 bps maximum line rate. Its verified support for V.21, V.22, V.22bis, V.23, Bell 103, and Bell 212A gives a system integrator several established modulation modes in one system-side ISOmodem. The integrated global DAA reduces the telephone-line interface burden, while capacitive isolation helps separate line-side and system-side circuits. In a fax controller design, the device should be paired with the required line-interface components, supply filtering, and country-specific network circuitry, with the manufacturer reference implementation followed closely.
پێشنیارکراو
Industrial Telemetry Terminals
The SI2400-BS is appropriate for industrial telemetry equipment that must communicate through a legacy analog telephone channel rather than an Ethernet or modern wireless link. Its documented 2400 bps ceiling and support for V.21, V.22, V.23, Bell 103, and Bell 212A provide established compatibility with older supervisory or remote-access equipment. The 3 V to 5.25 V operating range integrates well with conventional embedded control systems. For industrial deployment, engineers should pay particular attention to the capacitive-isolation boundary, overcurrent behavior, grounding strategy, and the line requirements of the destination telephone network.
پێشنیارکراو
Point-of-Sale Terminals
The SI2400-BS can serve as the communication engine in a point-of-sale terminal designed for legacy dial-up infrastructure. A 2400 bps rate is sufficient for compact transaction payloads, and the set of V-series and Bell protocols supports equipment accustomed to older modem interfaces. The integrated global DAA and parallel phone-detection functions can simplify line-interface implementation, while overcurrent protection adds a useful safeguard for connected analog lines. The design still needs a compliant telephone-network interface, robust line coupling, controlled supply sequencing, and isolation-aware PCB routing. Production adoption should be conditional on availability and support for the legacy access network.
پێشنیارکراو
Remote Monitoring and Control
The SI2400-BS is useful in remote monitoring and control products that must reach equipment over an analog telephone service. The modem supports legacy rates and modulation formats through 2400 bps, while its system-side ISOmodem architecture is intended to connect host equipment to a telephone line interface. Capacitive isolation is particularly relevant when the host circuitry and line-connected circuits require separation. Parallel phone detection can assist systems that recognize another telephone or terminal sharing the line. Engineers should verify country-specific line-interface approval, surge exposure, cable routing, and the complete pin-level application circuit before installation in unattended monitoring equipment.
پێشنیارکراو
Data Communication Equipment
The SI2400-BS is designed for data communication equipment that must interoperate with legacy V.21, V.22, V.22bis, V.23, Bell 103, and Bell 212A modem systems. Its compact 16-SOIC package permits integration where larger multi-component modem boards would be impractical. The integrated global DAA lowers component count, and the documented capacitive-isolation and parallel-phone-detect features support practical telephone-line interface implementation. Integration should preserve the isolation region, use compliant line-network components, and provide stable supply decoupling. Because the maximum throughput is 2400 bps, the device is best reserved for control, status, short-message, or compatibility functions rather than bandwidth-intensive data transfer.
پێشنیارکراو
Shared-Line Telephone Products
The SI2400-BS is a logical candidate for shared-line telephone products because its verified feature set includes parallel phone detection and a globally compliant line interface. These functions can help a data terminal detect another device connected to the same line before beginning or continuing a modem session. The device combines that behavior with an integrated global DAA, capacitive isolation, overcurrent protection, and support for multiple legacy protocols. A successful product design still requires exact pinout data, correct line-voltage and current sensing, compliant telephone-network coupling, and application-specific logic for line-seizure and contention behavior. The full manufacturer datasheet is required before finalizing the interface.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ SI2400-BS — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | SI2400-FS | SI2400-KS |
|---|---|---|---|
| Brand | Skyworks Solutions | Skyworks Solutions | Skyworks Solutions |
| Package | 16-SOIC | 16-SOIC | 16-SOIC |
| Product Type | ISOmodem system-side interface IC | 2.4 kbps modem system-side IC | 2.4 kbps modem system-side IC |
| Maximum Data Rate | 2400 bps | 2400 bps | 2400 bps |
| Supported Data Formats | V.21, V.22, V.23, Bell 103, Bell 212A | V.21, V.22, V.23, Bell 103, Bell 212A | V.21, V.22, V.23, Bell 103, Bell 212A |
| Mounting Type | Surface mount | Surface mount | Surface mount |
| Number of Pins | 16 pins | 16 pins | 16 pins |
جیاکەرەوە سەرەکییەکان
- Exact-source selection with documented global DAA integration (بەراورد بەSI2400-FS)
- Broad legacy protocol coverage at a 2400 bps maximum rate (بەراورد بەSI2400-KS)
- Same-package sourcing continuity within the same product family (بەراورد بەSI2400-FS)
تێبینییەکانی دیزاین
Preserve the SI2400-BS capacitive-isolation boundary in the PCB layout. Keep line-side analog and telephone-network connections on their assigned side of the isolation region, avoid routing high-current or fast-switching paths parallel to sensitive line nets, and follow the manufacturer’s isolation and creepage guidance when available. Because the verified data confirms capacitive isolation but does not provide creepage, clearance, or working-voltage dimensions, those values must be obtained from the exact datasheet before defining the board’s isolation barrier.
The verified operating range is 3 V to 5.25 V, so the supply design must remain inside that interval under startup, modem activity, and line-transient conditions. Place bypass capacitors close to the supply and ground pins, provide adequate source current for the DAA and line-interface functions, and account for telephone-network transients with the protection network recommended by the manufacturer. Exact capacitor values, current limits, and absolute maximum ratings were not included in the verified material and should not be inferred from the 3 V to 5.25 V operating range.
Do not treat a matching 16-SOIC outline as proof that SI2400-BS, SI2400-FS, and SI2400-KS are automatically interchangeable. The verified comparison data establishes the 2400 bps rate, principal V-series and Bell formats, and package format, but it does not expose every pin assignment, qualification grade, or suffix-specific feature. Before substitution, compare the complete manufacturer pinout, supply limits, timing, DAA behavior, isolation characteristics, and temperature or compliance information for each exact ordering code.
The parallel phone-detect feature must be interpreted in the context of the complete shared-line circuit rather than treated as a complete line-seizure solution. Validate detection thresholds, timing, and interaction with the external line interface against the exact datasheet and reference design. Similarly, confirm that the overcurrent feature provides the protection assumed by the board design. These functions interact with telephone-network voltage, current, and disconnection behavior that are not fully quantified in the verified distributor snippets.
زانیاری پابەندبوون
The verified datasheet listing identifies the SI2400-BS as lead free. RoHS, REACH, halogen-free, and conflict-minerals statements were not present in the supplied data. AEC-Q100 is marked not applicable because this is a legacy telecommunications interface IC rather than an automotive-qualified device; no automotive qualification claim was verified.