ئاگاداری دوایین کڕین: SI2457-C-GT نزیکە لە کۆتایی ژیان. دوایین ڕێکەوتی داواکاری: پەیوەندیمان پێوە بکە. بینینی بەشە جێگرەوە بەردەستەکان →
Silicon Laboratories

SI2457-C-GT - 56 kbps V.90 ISOmodem | Silicon Laboratories

MPN: SI2457-C-GT ⚠ کۆتا کڕین
3.3 V Vdss 24-pin TSSOP, 0.173 in (4.40 mm) width Package
MOQ: 1 |

SI2457-C-GT گشتی

Silicon Laboratories SI2457-C-GT is a 56 kbps V.90 ISOmodem system-side codec IC for data communication over the Public Switched Telephone Network. It supports V.21, V.22, V.23, V.32, V.34, and V.90 data formats, along with Bell 103 and Bell 212A, and operates from a 3.0 V to 3.6 V supply in a 24-pin TSSOP package. The SI2457-C-GT also provides parallel phone detection and capacitive isolation exceeding 6000 V.

An ISOmodem is a complete modem chipset for analog telephone-line data communication. The system-side member handles modulation, demodulation, data formatting, and telephone-line interface functions, while a separate global line-side device connects to the analog network. Within the product hierarchy, the SI2457-C-GT is an ISOmodem codec IC, interface IC, communications IC, and semiconductor intended for embedded data modem designs.

The device combines support for legacy ITU-T modem standards with automatic rate negotiation, MNP2-5 error correction, and V.42bis compression. These features allow embedded equipment to negotiate supported connection rates and maintain reliable data transfer across variable telephone-line conditions. Its protocol coverage includes the commonly encountered V.32 and V.34 rates in addition to the top 56 kbps V.90 operating rate.

The SI2457-C-GT is housed in a compact 24-pin TSSOP measuring 0.173 inches, or 4.40 mm, in width. Surface-mount construction supports automated PCB assembly, while the tube package is intended for protected component handling before board population. A 3.3 V nominal supply keeps the interface compatible with conventional 3.3 V embedded systems, although the complete modem system must also account for line-side interface requirements.

Typical uses include industrial data collection terminals, remote monitoring equipment, point-of-sale systems, legacy telecom appliances, and embedded controllers that retain a PSTN modem interface. Parallel phone detection can assist equipment in distinguishing an active data call from an incoming voice call when the surrounding line interface supports that function.

Designers should treat the SI2457-C-GT as part of a complete ISOmodem chipset rather than a stand-alone network interface. The companion line-side device, crystal and timing components, analog telephone interface, isolation network, and power design must match the system-level modem architecture. Check the 24-pin pin-description table and reference schematic in the manufacturer datasheet before assigning PCB nets.

This product page combines protocol, package, lifecycle, sourcing, and replacement information into a design-focused reference. It also highlights same-footprint alternatives, practical integration considerations, and the specific functional features engineers should verify when selecting the SI2457-C-GT for a legacy PSTN modem design.

جێگرەوەکانی جێگۆڕکێ بۆ SI2457-C-GT — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ SI2457-C-GT (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Device Type, Capacitive Isolation, Package, RoHS Status, Error Correction.

Skyworks Solutions
Device Type: Modem IC
Capacitive Isolation: More than 6000 V
Package: 24-pin TSSOP
بەراوردکردن لەگەڵ SI2457-C-GT →
Skyworks Solutions
Device Type: 56 kbps system-side ISOMODEM
Package: 24-pin TSSOP
RoHS Status: Compliant
بەراوردکردن لەگەڵ SI2457-C-GT →

SI2457-C-GTR

✅ جێگرەوەی ڕاستەوخۆ
📦 24-TSSOP
Same 56 kbps modem performance and matching 24-TSSOP terminals; ordering suffix differs by reel versus tube packaging

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

SI2457-D-GT

✅ جێگرەوەی ڕاستەوخۆ
Skyworks Solutions
📦 24-TSSOP
56 kbps system-side ISOMODEM · 3.3 V · 56 kbps · 300 bps · V.21, V.22, V.23, V.32, V.34, V.90 · Bell 103, Bell 212A · V.42, V.42bis, V.44, Fast Connect, MNP2-5 · Type I and Type II decode

پەیوەندی بۆ نرخ

بینینی داتاشیت →

SI2457-C-FT

✅ جێگرەوەی ڕاستەوخۆ
Skyworks Solutions
📦 24-TSSOP
Modem IC · 56 kbps · 3 V to 3.6 V · 3.3 V · 26 mA · 0 °C to 70 °C · 24-pin TSSOP · 24

پەیوەندی بۆ نرخ

بینینی داتاشیت →

SI2457-C-GT تایبەتمەندییەکان

Device Type ISOmodem system-side codec IC
Maximum Data Rate 56 kbps
Nominal Supply Voltage 3.3 V
Supply Voltage Range 3.0 V to 3.6 V
مەودای پلەی گەرمیی کارکردن 0 C to 70 C
پاکێج 24-pin TSSOP, 0.173 in (4.40 mm) width
جۆری دامەزراندن Surface mount
Packaging Tube
Supported Data Formats V.21, V.22, V.23, V.32, V.34, V.90, Bell 103, Bell 212A
Primary V.90 Connection Rate 56 kbps
Error Correction MNP2-5
Data Compression V.42bis
Rate Negotiation Automatic
Telephone Line Support Public Switched Telephone Network
Capacitive Isolation Over 6000 V
Phone Detection Parallel phone detect
Lead-Free Status Lead free
دۆخی RoHS RoHS compliant

ڕێنمایی ڕێکخستنی پینی SI2457-C-GT 24-pin tssop, 0.173 in (4.40 mm) width

ڕێکخستنی پین بۆ SI2457-C-GT (پاکێجی 24-pin tssop, 0.173 in (4.40 mm) width). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 24-pin tssop, 0.173 in (4.40 mm) width بۆ SI2457-C-GT

هیچ داتای وردی پینئاوت بەردەست نییە بۆ SI2457-C-GT.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

SI2457-C-GT گونجاوە بۆ 6 بەکارھێنانs: Industrial Remote Data Collection, Point-of-Sale Terminal, Legacy Telecom Equipment, Remote Utility Metering, Security and Alarm Dialer, Embedded Controller Communication Module.

🏭

Industrial Remote Data Collection

The SI2457-C-GT fits industrial monitoring equipment that must transmit collected data through an analog PSTN line at rates up to 56 kbps. Its V.90, V.34, and V.32 support permits rate selection across varying line conditions, while automatic rate negotiation reduces host-side configuration effort. The system-side modem IC works with the companion line-side device and an isolation network to create a complete telecom interface. For equipment deployed across large facilities, the combination of MNP2-5 error correction and V.42bis compression can improve transfer efficiency over noisy connections.

🖥️

Point-of-Sale Terminal

The SI2457-C-GT can support a legacy point-of-sale terminal that communicates transaction data through a telephone connection. A 56 kbps V.90 rate provides a practical balance between throughput and compatibility with PSTN infrastructure, while support for Bell 103 and Bell 212A broadens interoperability with older equipment. The modem must be paired with the appropriate line-side interface and isolation components. Designers should budget board area for the 24-pin TSSOP device and verify telephone-network approval requirements for the finished equipment.

🌐

Legacy Telecom Equipment

The SI2457-C-GT is appropriate for maintaining or repairing legacy telecommunications equipment whose system-side modem was designed around the SI2457 chipset. Supporting V.21 through V.90 permits the equipment to connect with services operating at different legacy rates. A system integrator should confirm that the complete chipset includes the compatible global line-side device, telephone-line isolation, and control interface. Because the SI2457-C-GT is a last-time-buy component, controlled inventory can be useful for spares and board-level restoration.

🔧

Remote Utility Metering

The SI2457-C-GT can serve as the communications component in a remote utility meter that must periodically report readings over an analog telephone line. The modem's 56 kbps maximum rate can carry compact telemetry records efficiently, while automatic rate negotiation helps establish a usable connection without requiring every endpoint to use the same fixed modulation rate. The design must provide the required telephone isolation and line-side interface hardware. Firmware should also implement retries and communication timeouts for temporary PSTN service interruptions.

🎥

Security and Alarm Dialer

The SI2457-C-GT can support a legacy security panel or alarm dialer that must establish a modem session for alarm reporting. The device's support for V.90 and lower ITU-T rates allows the panel to connect across a broad range of central-station modem configurations. Parallel phone detection can assist the surrounding telephone interface when both data and voice functions are present. The circuit design must preserve the isolation requirements of the line connection and should be validated against the applicable regulatory and network-interface requirements.

🧩

Embedded Controller Communication Module

The SI2457-C-GT is suitable for an embedded controller that needs a standards-based asynchronous modem interface rather than a proprietary cellular or Ethernet link. Its standard AT-command modem behavior simplifies host integration, and the supported compression and error-correction functions improve reliability over imperfect analog lines. The controller board should allocate the 24-pin TSSOP footprint and required clock, isolation, and telephone-interface components. Firmware should support automatic rate negotiation, connection-state monitoring, and controlled resets for unattended field operation.

کورتەی بەرهەمە پێشنیارکراوەکان

SI2457-D-GT Skyworks Solutions بەکارهێنراوە لە: Industrial Remote Data Collection, Point-of-Sale Terminal, Remote Utility Metering, Security and Alarm Dialer SI2457-C-GTR Same-family 24-TSSOP ISOmodem alternative بەکارهێنراوە لە: Industrial Remote Data Collection, Point-of-Sale Terminal, Legacy Telecom Equipment, Remote Utility Metering, Security and Alarm Dialer, Embedded Controller Communication Module SI2457-C-FT Skyworks Solutions بەکارهێنراوە لە: Legacy Telecom Equipment, Embedded Controller Communication Module
What is the SI2457-C-GT?
The SI2457-C-GT is a 56 kbps V.90 ISOmodem system-side codec IC used to add a modem data connection to embedded equipment. According to the manufacturer datasheet, it supports V.21, V.22, V.23, V.32, V.34, V.90, Bell 103, and Bell 212A formats in a 24-pin TSSOP package. It is intended for complete ISOmodem chipset designs connected to the Public Switched Telephone Network.
What is the operating voltage of SI2457-C-GT?
The SI2457-C-GT operates from 3.0 V to 3.6 V, with a nominal supply of 3.3 V. The manufacturer SI2457 datasheet describes the device as part of the ISOmodem family, while the product listing identifies this ordering code as a system-side modem IC. Confirm the supply tolerance and decoupling requirements against the power section of the manufacturer datasheet when designing the PCB.
What is the maximum data rate of SI2457-C-GT?
The SI2457-C-GT supports a maximum connection rate of 56 kbps under V.90. The same modem implementation also supports V.21, V.22, V.23, V.32, and V.34, together with Bell 103 and Bell 212A. According to the manufacturer datasheet, the device accepts standard modem AT commands and provides automatic rate negotiation for compatible telephone-line connections.
Where can I download the SI2457-C-GT datasheet PDF?
The SI2457-C-GT datasheet can be downloaded from the official Skyworks PDF link listed on this page. The document is titled Si2457/34/15/04 Data Sheet and describes the related 56 kbps ISOmodem family. Use the manufacturer's pin-description table, reference schematic, electrical characteristics, and ordering information rather than relying on reseller summaries when assigning pins or designing the line interface.
Where is the SI2457-C-GT pinout?
The SI2457-C-GT pinout is documented in the pin-description section of the manufacturer SI2457 datasheet. The device uses a 24-pin TSSOP package, but individual pin names are not printed in the available product text. Use the manufacturer pin table and reference schematic to assign supply, clock, control, data, and telephone-interface nets before finalizing component placement and PCB routing.
What package does the SI2457-C-GT use?
The SI2457-C-GT is supplied in a 24-pin TSSOP package measuring 0.173 inches, or 4.40 mm, in width. The package is designed for surface-mount assembly, and this ordering code is supplied in a tube. Its 24-pin footprint is distinct from the 16-pin line-side device used in the complete ISOmodem chipset architecture.
Is the SI2457-C-GT still available?
The SI2457-C-GT is identified as a last-time-buy part. The manufacturer document is a legacy ISOmodem datasheet, and the ordering information indicates that the SI2457-C-GT has entered end-of-life processing. Request current availability, remaining quantity, and lot traceability through the Request a Quote form on this page before starting a new production run.
Where can I buy the SI2457-C-GT?
Use the Request a Quote form on this page to request the SI2457-C-GT and confirm current lot availability. The component is a last-time-buy device, so stock visibility and traceability should be confirmed before committing a design to production. The form allows the request to specify quantity, target package, required grade, and shipment destination.
What is the price of the SI2457-C-GT?
The SI2457-C-GT should be quoted through the Request a Quote form on this page because it is a last-time-buy component and availability may be limited by remaining manufactured inventory. The quote request can provide the quantity, delivery location, and traceability requirements needed for a current supply response. No fixed live price should be assumed for this legacy modem IC.
What is the lead time for the SI2457-C-GT?
The current lead time for the SI2457-C-GT depends on the quantity of remaining last-time-buy stock and the requested delivery schedule. Use the Request a Quote form on this page to state your required quantity and target date. Because the SI2457-C-GT is a legacy part, production scheduling and allocation may differ from standard active-component fulfillment.
Is the SI2457-C-GT in stock?
Stock for the SI2457-C-GT must be confirmed for the exact ordering code and required quantity. The manufacturer lists the device as last time buy, so availability can change as remaining inventory is allocated. Submit a Request a Quote request on this page for the current supply status, lot traceability, and packaging details rather than relying on a general stock indicator.
What is the best drop-in replacement for SI2457-C-GT?
The SI2457-C-GTR is the best supported drop-in candidate because a cross-reference listing states that its terminals and 24-TSSOP package match the SI2457-C-GT, with consistent performance and functional characteristics. The candidate should still be approved against the manufacturer datasheet and your BOM lifecycle requirements. Because this is a last-time-buy part, confirm product status and traceability before substitution.
Can SI2457-D-GT replace SI2457-C-GT?
The SI2457-D-GT is a same-package candidate for review, but it should not be treated as an unconditional substitution. Cross-reference results identify the SI2457-D-GT as a 24-TSSOP alternative and list it as active, which is useful for lifecycle continuity. Compare its exact protocol, supply, temperature, register, and pin descriptions against the SI2457-C-GT before approving a drop-in replacement.
SI2457-C-GT vs SI2457-C-GTR - which is better?
The SI2457-C-GTR is the closer drop-in match for a finished SI2457-C-GT board because the cross-reference listing describes its terminals and 24-TSSOP package as consistent with the target. The main practical distinction is ordering and lifecycle management rather than the stated modem performance. Verify the exact ordering suffix, package orientation, and approved-vendor status before substituting it into production hardware.
When should I choose SI2457-C-GT over an alternative?
Choose the SI2457-C-GT when maintaining an existing 24-pin TSSOP PSTN modem design requires the exact qualified ordering code and its documented protocol behavior. A same-footprint alternative may be preferable when sourcing continuity matters more than exact ordering-code continuity, provided every pin, register, electrical limit, and lifecycle requirement has been checked. The SI2457-C-GT itself should be selected only for controlled legacy-production or repair use.
Is the SI2457-C-GT suitable for a remote monitoring terminal?
The SI2457-C-GT is suitable for a remote monitoring terminal that specifically requires a legacy PSTN data path at up to 56 kbps. Its V.90 operation, automatic rate negotiation, MNP2-5 error correction, and V.42bis compression support reliable modem communication over the analog telephone network. The system must also include the required line-side device, isolation network, telephone interface, and appropriate timing components.

داتای سەرچاوەی ئەندازیاری بۆ SI2457-C-GT — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the SI2457-C-GT when repairing or maintaining a controlled legacy product that specifically requires its documented protocol set, 3.3 V operation, and exact ordering code. Consider the SI2457-C-GTR when a same-footprint, same-performance device is needed and the distinction between tube and reel packaging is acceptable; confirm its current lifecycle and lot traceability before committing it to production. Evaluate the SI2457-D-GT when continued sourcing is more important than exact suffix continuity, but review its electrical limits, register behavior, temperature range, and pin descriptions against the manufacturer documentation before substitution. The SI2457-C-FT is another same-family service candidate, subject to qualification review. In every case, verify that the candidate is the 24-pin system-side device rather than the 16-pin global line-side device, and confirm that the complete ISOmodem chipset and telephone-network interface remain unchanged.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە SI2457-C-GTR SI2457-D-GT SI2457-C-FT
Brand Silicon Laboratories Silicon Laboratories Silicon Laboratories Silicon Laboratories
Package 24-TSSOP 24-TSSOP 24-TSSOP 24-TSSOP
Device Type ISOmodem system-side codec IC 56 kbps modem Telecommunications interface modem IC Signal converter modem device
Lifecycle Status Last time buy Obsolete Active NRND

جیاکەرەوە سەرەکییەکان

  • Exact 56 kbps protocol set for legacy PSTN compatibility (بەراورد بەSI2457-D-GT)
  • Documented MNP2-5 error correction and V.42bis compression (بەراورد بەSI2457-C-GTR)
  • Established 24-pin system-side package (بەراورد بەSI2457-C-FT)

تێبینییەکانی دیزاین

Place the SI2457-C-GT and its supporting clock, decoupling, and modem-interface components according to the manufacturer reference schematic. Keep the 24-pin TSSOP footprint free of accidental courtyard conflicts, and follow the datasheet guidance for exposed or sensitive signal routing. Because the device is part of a two-IC ISOmodem chipset, validate land patterns against both the system-side and global line-side devices before releasing the PCB.

Keep telephone-line and isolation-network connections physically separated from sensitive control or data traces. Route high-voltage network-side connections directly through the intended protection and isolation components, and avoid extending unprotected line-side copper beneath unrelated circuitry. Maintain the clearances and component arrangement shown in the manufacturer reference design. This prevents the modem interface from introducing coupled noise into embedded control electronics.

Do not treat the SI2457-C-GT as a complete standalone modem. The system requires the companion global line-side device, telephone isolation, clocking, and the appropriate control interface. Also verify that any alternative uses the 24-pin TSSOP system-side footprint rather than the 16-pin line-side footprint. A matching protocol description alone does not establish pin compatibility for a finished PCB.

Design the 3.3 V supply rail with low impedance and place local bypass capacitors close to the device pins according to the manufacturer datasheet. Keep switching-regulator and digital-supply noise away from the modem and telephone-interface sections. The SI2457-C-GT operates within a 3.0 V to 3.6 V range, so power sequencing and transient margins should be checked across start-up, reset, and worst-case line conditions.

زانیاری پابەندبوون

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Yes
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The SI2457-C-GT listing identifies the device as RoHS compliant and lead free. No explicit REACH, halogen-free, or conflict-minerals declaration was identified. AEC-Q100 is not applicable to this commercial-temperature legacy telecom interface IC.

داتا پشتڕاستکراوەتەوە لە: 2026-11-10 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

SI2457-C-GT datasheet SI2457-C-GT pinout SI2457-C-GT datasheet pdf SI2457-C-GT equivalent SI2457-C-GT replacement SI2457-C-GT cross reference SI2457-C-GT price SI2457-C-GT stock Silicon Laboratories SI2457-C-GT SI2457-C-GT 56 kbps V.90 SI2457-C-GT 24-TSSOP SI2457-C-GT vs SI2457-C-GTR SI2457-C-GT application circuit SI2457-C-GT telephone interface

پێکهاتە و زاراوە پەیوەندیدارەکان

Silicon Laboratories Skyworks Solutions SI2457-C-GT SI2457-C-GTR SI2457-D-GT SI2457-C-FT ISOmodem system-side codec IC modem IC interface IC communications IC semiconductor V.90 V.34 V.32 MNP2-5 V.42bis AT commands Public Switched Telephone Network parallel phone detect capacitive isolation 24-TSSOP TSSOP family surface-mount package RoHS lead-free
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ