Skyworks Solutions

SI4136-F-BM - 2.5 GHz RF Synthesizer | Skyworks

MPN: SI4136-F-BM ✗ کۆتایی ژیان
25.7 mA Vdss 5 µA Id 28-pin QFN with exposed pad Package 2500 MHz Speed
MOQ: 1 |

SI4136-F-BM گشتی

Skyworks Solutions, Inc. SI4136-F-BM is an ISM-band RF frequency synthesizer with a 2 MHz to 50 MHz reference input, up to 2500 MHz output, three integrated VCOs, integrated loop filters, varactors, and resonators, and a 28-pin QFN exposed-pad package. The device is designed for wireless communications systems requiring local RF and IF synthesis with minimal external components.

An RF frequency synthesizer is a clock-and-timing semiconductor that generates programmable, phase-locked radio-frequency outputs from a stable reference. It belongs to the frequency synthesizer -> PLL/VCO -> clock generator and timer -> clock and timing IC -> semiconductor hierarchy. In a wireless transmitter or receiver, this function converts a fixed reference into the accurately controlled local oscillator used by mixers, modulators, demodulators, and transmit signal chains.

The SI4136-F-BM integrates multiple VCOs, phase detectors, dividers, loop filters, varactors, and resonators. Its verified operating characteristics include a 2 MHz to 50 MHz input range, a maximum output frequency of 2500 MHz, a 5 µA standby current, and a 25.7 mA typical supply current. These characteristics support dual-band wireless designs while reducing board area and external-component count.

The synthesizer architecture allows divider and power-down settings to be programmed through a three-wire serial interface. That serial control supports automatic frequency selection and operating-state management in software-defined radios, WLAN equipment, satellite-radio receivers, and other RF communications products. Its integrated implementation also helps reduce RF routing complexity compared with discrete oscillator and divider chains.

Typical uses include WLAN terminals, ISM-band transceivers, satellite-radio equipment, RF1/RF2/IF synthesis, and wireless communications basebands. Designers should preserve adequate reference-signal integrity, follow the manufacturer's recommended grounding and decoupling layout, and verify loop-filter settings when changing channel plans or reference frequencies.

The principal design trade-off is lifecycle rather than electrical function. The SI4136-F-BM is identified as not recommended for new designs, and the verified distributor data identifies SI4136-F-GM as the recommended replacement. New designs should therefore evaluate that successor, while existing assemblies can use the documented family relationship for orderly transition planning.

This page combines verified manufacturer-family specifications, distributor lifecycle information, package details, replacement guidance, and engineering-oriented selection notes. It is intended to support procurement, cross-reference, PCB transition, and design-review decisions without presenting unsupported component parameters as confirmed facts.

جێگرەوەکانی جێگۆڕکێ بۆ SI4136-F-BM — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ SI4136-F-BM (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Product Type, Device Type, Integrated Functions, Package Width.

Silicon Labs
Package: 28-VFQFN exposed-pad surface-mount package
Product Type: RF frequency synthesizer IC
بەراوردکردن لەگەڵ SI4136-F-BM →
Skyworks Solutions
Package: 24-TSSOP
Product Type: ISM RF frequency synthesizer IC
Integrated Functions: Phase detectors, loop filters, reference divider, and VCO divider
بەراوردکردن لەگەڵ SI4136-F-BM →
Silicon Labs
Package: 28-pin VQFN with exposed pad
Device Type: RF frequency synthesizer with integrated VCOs
بەراوردکردن لەگەڵ SI4136-F-BM →
Silicon Labs
Package: 24-TSSOP
Device Type: Monolithic ISM RF synthesizer
Integrated Functions: 3 VCOs, loop filters, reference divider, VCO dividers, and phase detectors
بەراوردکردن لەگەڵ SI4136-F-BM →

SI4136-F-GM

✅ جێگرەوەی ڕاستەوخۆ
Silicon Labs
📦 28-pin QFN exposed pad
RF frequency synthesizer with integrated VCOs · 2.5 GHz · 2.7 V to 3.6 V · 3 · Three-wire serial interface · Divider and power-down settings · 28-pin VQFN with exposed pad · 28 pins

پەیوەندی بۆ نرخ

بینینی داتاشیت →

SI4136-F-BT

✅ جێگرەوەی ڕاستەوخۆ
Skyworks Solutions
📦 28-pin QFN exposed pad
ISM RF frequency synthesizer IC · 2.5 GHz · 1 channel · 3 VCOs · 3-wire serial interface · 24-TSSOP · 4.40 mm · Surface mount

پەیوەندی بۆ نرخ

بینینی داتاشیت →

SI4136-F-GT

✅ جێگرەوەی ڕاستەوخۆ
Silicon Labs
📦 28-pin QFN exposed pad
Monolithic ISM RF synthesizer · 2.5 GHz · 3 · 3 VCOs, loop filters, reference divider, VCO dividers, and phase detectors · Three-wire serial interface · Divider and power-down settings · 5 µA · 25.7 mA

پەیوەندی بۆ نرخ

بینینی داتاشیت →

SI4136-F-BM تایبەتمەندییەکان

Product Type ISM RF frequency synthesizer
Maximum Output Frequency 2500 MHz
Reference Input Frequency Range 2 MHz to 50 MHz
Number of Integrated VCOs 3
Integrated Circuit Elements VCOs, loop filters, varactors, and resonators
Standby Current 5 µA
Typical Supply Current 25.7 mA
Programming Interface Three-wire serial interface
Programmable Functions Divider and power-down settings
پاکێج 28-pin QFN with exposed pad
جۆری دامەزراندن Surface mount

ڕێنمایی ڕێکخستنی پینی SI4136-F-BM 28-pin qfn with exposed pad

ڕێکخستنی پین بۆ SI4136-F-BM (پاکێجی 28-pin qfn with exposed pad). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 28-pin qfn with exposed pad بۆ SI4136-F-BM

هیچ داتای وردی پینئاوت بەردەست نییە بۆ SI4136-F-BM.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

SI4136-F-BM گونجاوە بۆ 6 بەکارھێنانs: WLAN RF and IF Signal Chains, ISM-Band Wireless Transceivers, Satellite Radio Receivers, Software-Defined Radio, RF Communication Basebands, Portable Wireless End Equipment.

🌐

WLAN RF and IF Signal Chains

The SI4136-F-BM fits WLAN equipment requiring programmable local RF synthesis because it combines three integrated VCOs with output capability up to 2500 MHz and divider control through a three-wire serial interface. Its integrated loop filters, varactors, and resonators reduce the number of external frequency-generation components required around the synthesizer. The 25.7 mA typical supply current is suitable for connected wireless products where RF-channel selection must be accurate and board area is constrained. Designers should still verify phase noise, spur performance, RF1/RF2 frequency limits, and loop-filter configuration in the manufacturer datasheet for the selected WLAN band.

📡

ISM-Band Wireless Transceivers

The SI4136-F-BM is appropriate for ISM-band transceivers because it combines a 2 MHz to 50 MHz reference input with integrated VCO-based synthesis up to 2500 MHz. This architecture supports both RF and IF signal-chain generation while allowing divider and power-down states to be programmed by an embedded controller. Integrated VCOs, loop filters, varactors, and resonators can shorten RF-layout iterations compared with a discrete synthesis approach. Before adoption, confirm the individual output-band limits, reference sensitivity, spur requirements, and channel-plan settings against the target transceiver’s modulation and regulatory constraints.

📺

Satellite Radio Receivers

SI4136-F-BM-based satellite-radio designs can use the device as a programmable RF1, RF2, or IF synthesizer, as reflected in the verified distributor classification. A maximum output frequency of 2500 MHz provides coverage for several receiver architectures, while the three-wire serial interface allows a host controller to select divider ratios and manage power-down behavior. The 28-pin QFN exposed-pad package supports compact receiver boards without relying on a larger oscillator module. Engineers should verify the exact IF plan, lock-time requirements, phase-noise contribution, and reference distribution topology before approving it for a satellite receiver front end.

🖥️

Software-Defined Radio

The SI4136-F-BM can serve a software-defined radio local-oscillator block because divider settings are programmable through its three-wire serial interface and power-down control supports dynamic operating states. The integrated VCO and loop-filter architecture permits a compact RF synthesis implementation, while the 2500 MHz maximum output covers common wireless carrier-generation requirements. In an SDR, reference purity and phase noise can directly affect receiver and transmitter performance, so the design must use a low-noise reference and follow the recommended layout around the QFN exposed pad. Firmware should also handle lock-state monitoring and deterministic frequency changes.

🔧

RF Communication Basebands

The SI4136-F-BM is suitable for RF communication basebands that need a local oscillator generated from a shared reference. Its 2 MHz to 50 MHz input range allows use with common system reference distributions, and the 25.7 mA typical supply current keeps integration practical for compact multichannel hardware. Programmable dividers make the synthesizer useful where the baseband must select among RF1, RF2, or IF frequencies. The key qualification checks are lock performance under the intended reference tolerance, phase-noise degradation through the divider chain, and isolation between adjacent channels sharing the same source.

📱

Portable Wireless End Equipment

Portable wireless products benefit from the SI4136-F-BM's 5 µA standby current because the synthesizer can enter a low-power state between active periods. When enabled, the integrated VCOs support RF generation up to 2500 MHz, reducing reliance on separate frequency-generation components in space-constrained equipment. Battery life should be evaluated using the actual operating-state current, reference-divider activity, RF output condition, and the system's power-management policy rather than the standby value alone. The same-package transition to SI4136-F-GM is especially relevant for portable-product designs being introduced after the SI4136-F-BM reaches end of life.

What are the key specifications of SI4136-F-BM that engineers should know?
The SI4136-F-BM is an ISM RF frequency synthesizer with a 2 MHz to 50 MHz reference input, output capability up to 2500 MHz, three integrated VCOs, and a 28-pin QFN exposed-pad package. According to the manufacturer datasheet, it also integrates loop filters, varactors, and resonators, uses a three-wire serial interface for divider and power-down programming, draws 5 µA in standby, and has a typical supply current of 25.7 mA. These specifications place it in wireless RF and IF signal-chain applications where a compact, programmable local oscillator is required.
What is the operating frequency range of SI4136-F-BM?
The SI4136-F-BM accepts a reference input from 2 MHz to 50 MHz and can generate output frequencies up to 2500 MHz. The manufacturer datasheet identifies the part as an ISM RF synthesizer with integrated VCOs for wireless communications. Separate RF1, RF2, and IF frequency limits were not present in the supplied verified excerpts, so those ranges remain unconfirmed here. This distinction matters because the 2500 MHz value is the verified maximum output capability, not the reference-input frequency.
Where can I download the SI4136-F-BM datasheet PDF?
The SI4136-F-BM datasheet is available through the verified Silicon Laboratories datasheet index, with the manufacturer-family PDF linked from the Alldatasheet result. The document is titled “ISM RF Synthesizer with Integrated VCOs for Wireless Communications” and presents the device architecture, electrical characteristics, programming interface, and package information. An official current Skyworks-hosted PDF URL was not included in the supplied data, so the indexed datasheet link is provided rather than an invented manufacturer URL.
Where can I find the SI4136-F-BM pinout?
The SI4136-F-BM pinout must be taken from the manufacturer datasheet because the supplied verified excerpts confirm a 28-pin QFN exposed-pad package but do not list individual terminal names or numbers. The package description is independently confirmed by the distributor and datasheet-index results. Pin-level programming, ground, supply, and RF connections should therefore be checked directly in the datasheet and the device’s recommended layout before making a PCB or replacement decision.
Is SI4136-F-BM suitable for wireless communications applications?
Yes, the SI4136-F-BM is specifically designed for ISM wireless communications and can support RF1, RF2, and IF synthesis. Its verified 2500 MHz maximum output, three integrated VCOs, integrated loop filters, varactors, resonators, and three-wire programming interface fit RF transceivers, WLAN equipment, satellite-radio products, and related signal chains. Suitability for a particular channel plan still depends on confirming the individual RF1, RF2, IF, phase-noise, supply-voltage, and temperature specifications in the manufacturer datasheet.
What can replace the SI4136-F-BM?
The verified Mouser listing identifies the SI4136-F-GM as the recommended replacement for the SI4136-F-BM. Both belong to the same SI4136 family, and the SI4136-F-GM is also confirmed by DigiKey as a 2.5 GHz frequency-synthesizer IC in a 28-VFQFN exposed-pad package. Engineers should still verify the programming register map, electrical limits, temperature grade, PCB land pattern, and lifecycle requirements before using it as a production drop-in replacement.
Is SI4136-F-GM a drop-in replacement for SI4136-F-BM?
The SI4136-F-GM is the documented recommended replacement for the SI4136-F-BM and uses the same 28-pin QFN exposed-pad format. That makes it the strongest same-family replacement candidate identified in the verified data. Pin-level and programming compatibility should still be confirmed against both datasheets because the supplied excerpts do not provide a complete terminal map or register comparison. The package match alone should not be treated as proof that every operating condition is identical.
What is the best Skyworks Solutions equivalent for SI4136-F-BM?
Skyworks Solutions, Inc. SI4136-F-GM is the best-supported equivalent found in the verified cross-reference data. It is explicitly named as the recommended replacement for the SI4136-F-BM and is listed as a 2.5 GHz frequency synthesizer in a 28-VFQFN exposed-pad package. This recommendation is more authoritative than a generic parametric match because it comes from the target’s distributor product record. Final design approval still requires a datasheet-level comparison of pin functions, registers, supply limits, and temperature ratings.
What is the difference between SI4136-F-BM and SI4136-F-GM?
The primary verified difference is lifecycle positioning: the SI4136-F-BM is marked not recommended for new designs, while the SI4136-F-GM is the recommended replacement. Both are associated with the SI4136 dual-band RF synthesizer family and the 28-pin QFN exposed-pad format. The supplied results do not expose the complete BM-versus-GM electrical or temperature-grade differences, so engineers should compare the two manufacturer datasheets rather than assuming every parameter is identical.
When should I choose SI4136-F-BM over SI4136-F-GM?
Choose the SI4136-F-BM primarily when maintaining an existing qualified design and its supply arrangement is more important than starting a new design. For new wireless equipment, choose the SI4136-F-GM because it is explicitly identified as the recommended replacement and is listed as a 2.5 GHz synthesizer in a 28-VFQFN exposed-pad package. Switching to the BM solely for new development would accept an NRPD status without a documented lifecycle benefit.
Where to buy SI4136-F-BM online?
The verified listing for SI4136-F-BM is available through DigiKey under Skyworks Solutions, Inc., with Mouser, Octopart, Nantian Electronics, and Jotrin also providing product or purchasing pages. The exact live stock quantity and current unit price were not included in the supplied data, so no availability or numeric price is asserted here. Because the part is not recommended for new designs, purchasing teams should confirm lifecycle status, authorized-channel sourcing, and the availability of the recommended SI4136-F-GM successor before placing a production order.
What is the price of SI4136-F-BM?
The current SI4136-F-BM unit price is not available in the supplied verified excerpts, so a defensible price cannot be stated. DigiKey and Mouser provide product pages where quantity pricing may be visible, while Octopart compares distributor bulk pricing. Any quotation should be checked as of 2026-10-28 because NRPD parts can have limited allocation and materially higher unit costs. No numerical tier is presented here because doing so would fabricate a price not contained in the verified data.
What is the lead time for SI4136-F-BM?
The lead time for SI4136-F-BM is not confirmed in the supplied verified data. The target is marked not recommended for new designs, and its recommended replacement is the SI4136-F-GM, which means lead-time planning should cover both continuity of the existing part and migration to the successor. Current manufacturer and authorized-distributor responses should be obtained as of 2026-10-28. For new production, using the documented replacement is generally lower risk than forecasting a long-lead NRPD component.
Is SI4136-F-BM in stock?
Current SI4136-F-BM stock cannot be confirmed from the supplied excerpts. DigiKey exposes stock and pricing on its product page, Mouser provides an inventory-oriented listing, and Octopart compares distributor availability, but no explicit live quantity was included in the verified results. The part is not recommended for new designs, so incidental distributor stock should not be interpreted as a long-term supply commitment. Procurement should verify inventory, authorized sourcing, and the SI4136-F-GM transition plan.
How much current does SI4136-F-BM consume?
The SI4136-F-BM has a verified standby current of 5 µA and a typical supply current of 25.7 mA. According to the manufacturer datasheet excerpt, the low standby figure supports power-saving operation in wireless equipment, while the 25.7 mA value represents typical operating consumption. These numbers do not by themselves establish total board energy consumption because that also depends on the enabled operating state, RF output configuration, supply voltage, reference frequency, and external circuitry. Verify the associated test conditions in the manufacturer datasheet.
What design considerations apply when using the SI4136-F-BM?
The primary design considerations are reference integrity, decoupling, RF layout, control sequencing, and lifecycle risk. The device accepts a 2 MHz to 50 MHz reference, draws 25.7 mA typically, and uses a three-wire interface for divider and power-down settings. Follow the manufacturer’s recommended layout, provide low-impedance supply and ground connections, and keep sensitive RF and reference traces away from noisy switching paths. Because the BM is NRPD, design a controlled transition to SI4136-F-GM rather than committing a new product to the BM.

داتای سەرچاوەی ئەندازیاری بۆ SI4136-F-BM — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the SI4136-F-BM mainly for maintaining an existing wireless design that has already completed qualification and validation, especially where the SI4136-F-GM has not yet been approved as its change control alternative. Its three integrated VCOs, 2500 MHz maximum output, 2 MHz to 50 MHz reference input, and serial divider control make it a compact RF and IF synthesis solution. For new WLAN, ISM, satellite-radio, or software-defined-radio products, select SI4136-F-GM because verified distributor data explicitly recommends it and confirms the same 28-VFQFN exposed-pad format. SI4136-F-BT and SI4136-F-GT are same-family candidates found in cross-reference results, but the supplied excerpts do not establish every suffix-specific difference. Before any substitution, compare pin functions, register behavior, frequency bands, phase noise, supply voltage, temperature grade, exposed-pad layout, and qualification requirements against the manufacturer datasheets.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە SI4136-F-GM SI4136-F-BT SI4136-F-GT
Brand Skyworks Solutions, Inc. Skyworks Solutions, Inc. Skyworks Solutions, Inc. Skyworks Solutions, Inc.
Package 28-pin QFN exposed pad 28-VFQFN exposed pad - same 28-pin QFN exposed pad - same 28-pin QFN exposed pad - same
Product Type ISM RF frequency synthesizer RF frequency synthesizer SI4136-F family synthesizer SI4136-F family synthesizer

جیاکەرەوە سەرەکییەکان

  • Documented successor path (بەراورد بەSI4136-F-GM)
  • Highly integrated RF synthesis (بەراورد بەSI4136-F-BT)
  • Low-power standby operation (بەراورد بەSI4136-F-GT)

تێبینییەکانی دیزاین

Use the manufacturer datasheet layout for the 28-pin QFN exposed pad, including uninterrupted ground connectivity beneath the package and short return paths for supply and reference signals. Keep the reference trace away from RF output and digital control routing, and provide local high-frequency decoupling at the supply pins. Because the exposed pad is part of thermal and electrical performance, verify the recommended via pattern and solder-land geometry rather than relying on a generic QFN footprint.

Preserve reference-signal quality because the SI4136-F-BM accepts a 2 MHz to 50 MHz input and its synthesized output can be affected by reference phase noise. Route the reference from a low-noise source, use a controlled impedance path, and avoid coupling it to switching supplies or high-current RF paths. Validate the complete reference and synthesized-output spectrum with the intended divider setting, since the supplied excerpts do not include verified phase-noise or spur limits.

Do not treat the same-family suffix or the 28-pin QFN package as proof of complete drop-in equivalence. Before replacing the SI4136-F-BM with SI4136-F-GM, SI4136-F-BT, or SI4136-F-GT, compare the full pin list, serial-register map, reference range, output bands, supply limits, temperature grade, and exposed-pad layout. The verified data explicitly recommends SI4136-F-GM for the BM and confirms its 28-VFQFN exposed-pad package, but it does not provide every suffix-specific electrical difference.

Budget the active current using the verified 25.7 mA typical supply-current value and account separately for the 5 µA standby state. The supply network must support the load transients produced when the synthesizer changes divider settings or exits power-down. Select local decoupling and regulator headroom from the actual supply-voltage range, which was not available in the supplied excerpts, and confirm operating current across frequency and temperature before assigning the regulator's power rating.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The supplied verified excerpts do not provide RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations. AEC-Q100 is treated as not applicable because this is an RF clock-and-timing synthesizer rather than an automotive-qualified power device.

داتا پشتڕاستکراوەتەوە لە: 2026-10-28 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

SI4136-F-BM datasheet Skyworks Solutions SI4136-F-BM SI4136-F-BM 2500 MHz synthesizer SI4136-F-BM 28-pin QFN SI4136-F-BM WLAN synthesizer SI4136-F-BM vs SI4136-F-GM SI4136-F-BM replacement SI4136-F-BM buy online SI4136-F-BM price and stock SI4136-F-BM pinout ISM RF synthesizer with integrated VCOs SI4136-F-BM lead time

پێکهاتە و زاراوە پەیوەندیدارەکان

Skyworks Solutions, Inc. Silicon Laboratories SI4136-F-BM SI4136-F-GM SI4136-F-BT SI4136-F-GT RF frequency synthesizer frequency synthesizer phase-locked loop PLL voltage-controlled oscillator VCO three-wire serial interface ISM RF synthesizer wireless communications WLAN satellite radio software-defined radio RF1 synthesis RF2 synthesis IF synthesis 28-pin QFN QFN family surface-mount package phase noise
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ