SN65HVD52D - 1 Mbps Full-Duplex RS-485 Transceiver | Texas Instruments
MPN: SN65HVD52D ✓ چالاکSN65HVD52D گشتی
An RS-485 transceiver is a physical-layer interface device that combines a differential line driver with a differential line receiver. The driver converts a single-ended logic signal into a balanced differential signal, while the receiver converts the differential bus voltage back into a logic signal. Full-duplex operation provides separate transmit and receive paths, allowing a system to transmit and receive simultaneously when the bus wiring and protocol support it. This makes the SN65HVD52D suitable for point-to-point links, multidrop RS-422 systems, and full-duplex RS-485 networks.
The SN65HVD52D is specified for operation from a 5 V supply and supports signaling rates up to 1 Mbps. The SN65HVD5X family includes low-current standby operation, glitch-free operation, and selectable driver transition-time options for different signaling rates. The device also supports an eighth-unit-load option, allowing substantially larger bus populations than a standard unit-load transceiver when system capacitance and topology permit. Bus-pin ESD protection exceeds 15 kV HBM according to the device documentation.
Typical applications include industrial automation links, programmable-logic-controller communication, factory-floor equipment, building-control networks, instrumentation, motor-control systems, and industrial data-acquisition equipment. The receiver is designed for balanced differential inputs, while the driver produces a high-output differential signal suitable for reliable communication over longer cable runs when the system uses proper termination and biasing.
When designing around the SN65HVD52D, verify the data rate, cable length, topology, termination, and common-mode range together. The 8-pin SOIC footprint is compatible with conventional surface-mount assembly, but the exact pin function and enable or standby behavior must be checked in the manufacturer pin-description table. This page combines device specifications, practical application guidance, package information, and verified source links for engineering evaluation.
جێگرەوەکانی جێگۆڕکێ بۆ SN65HVD52D — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ SN65HVD52D (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Product Type, Package, Bus-Pin ESD Protection, Supply Voltage Range, Bus Standard.
SN65HVD52DR
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
SN65HVD52DRG4
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
SN65HVD05D
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →SN65HVD78D
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →SN65HVD37D
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →SN65HVD52D تایبەتمەندییەکان
| Product Type | RS-485 / RS-422 full-duplex transceiver |
| Driver / Receiver Count | 1 driver and 1 receiver |
| خێرایی داتا | 1 Mbps |
| ڤۆڵتیەی دابینکردن | 5 V |
| Maximum Supply Voltage | 5.5 V |
| پلەی گەرمیی کارکردن | -40 C to +85 C |
| پاکێج | 8-pin SOIC (D) |
| جۆری دامەزراندن | Surface mount |
| Driver Configuration | Full-duplex |
| Bus Standard | RS-485 and RS-422 |
| Unit Load | 1/8 unit-load option |
| Maximum Bus Nodes | Up to 256 nodes |
| Bus-Pin ESD Protection | Exceeds 15 kV HBM |
| Standby Current | 1 uA |
| Maximum Transmit Delay | 230 ns |
| Maximum Supply Current | 8 mA |
| Interface Standard | EIA-485-A |
ڕێنمایی ڕێکخستنی پینی SN65HVD52D 8-pin soic (d)
ڕێکخستنی پین بۆ SN65HVD52D (پاکێجی 8-pin soic (d)). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ SN65HVD52D.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
SN65HVD52D گونجاوە بۆ 6 بەکارھێنانs: Industrial Automation Communication, Factory Data Acquisition, Building Control Networks, Test and Measurement Equipment, Motor and Motion Control, Remote Sensor Networks.
Industrial Automation Communication
The SN65HVD52D is appropriate for industrial automation links that require a high-output differential driver and full-duplex communication at up to 1 Mbps. Place the transceiver between a controller UART and a balanced RS-485 or RS-422 cable, using separate transmit and receive pairs in the full-duplex wiring scheme. Its 5 V supply and 1 Mbps rate suit equipment such as programmable logic controllers, remote I/O modules, and factory automation controllers. The design should include proper cable termination, common-mode grounding, and protection at the connector because the IC provides the physical-layer interface rather than complete surge isolation.
پێشنیارکراو
Factory Data Acquisition
Use the SN65HVD52D in factory data-acquisition equipment where sensor or instrument data must travel over a balanced cable without exposing the controller directly to bus transients. Its one-driver, one-receiver arrangement supports point-to-point full-duplex links, while the 1 Mbps signaling capability accommodates modern digital measurement traffic. The 1/8-unit-load option can support larger bus populations when the network capacitance and topology remain within the device specifications. A practical implementation uses separate differential pairs, local supply decoupling, and connector-side protection, while the receiver provides a clean logic signal back to the measurement controller.
پێشنیارکراو
Building Control Networks
The SN65HVD52D can connect building-control equipment over balanced RS-485 or RS-422 wiring where low power, reliable differential signaling, and moderate data throughput are required. Its full-duplex configuration allows a controller to issue commands while receiving sensor or status information, which is useful in HVAC, access-control, and environmental-monitoring equipment. The 5 V operating supply and low-current standby mode are useful for distributed panels, but the system designer must preserve the recommended bus topology and provide surge protection when cables leave the building or connect to long field wiring.
پێشنیارکراو
Test and Measurement Equipment
The SN65HVD52D is useful in test and measurement instruments that need a dependable balanced interface to remote fixtures, probes, or distributed measurement nodes. The 1 Mbps rate provides useful bandwidth for digital status, control, and synchronized data paths, while the full-duplex arrangement simplifies designs that need simultaneous command and response traffic. In an instrument chassis, place the transceiver near the interface connector, provide local decoupling, and keep sensitive analog circuitry physically separated from the bus entry. Cable shielding or a suitable transient-protection network should be added when the external connection is long or electrically noisy.
پێشنیارکراو
Motor and Motion Control
The SN65HVD52D can serve as the communication interface in motor-control and motion-control subsystems where a controller distributes commands and receives feedback over a balanced field bus. Its high-output driver is appropriate for robust signaling on industrial wiring, and the 1 Mbps rate is suitable for control messages that do not require continuous high-bandwidth motion data. The circuit should be arranged with separate differential transmit and receive routes, a defined grounding strategy, and connector protection. If the motor environment contains severe switching transients, an isolated transceiver or additional protection layer may be preferable.
پێشنیارکراو
Remote Sensor Networks
The SN65HVD52D supports distributed sensor networks that use RS-485 or RS-422 for reliable communication over balanced cables. The eighth-unit-load option can accommodate up to 256 nodes in an appropriately designed bus, making the device relevant to environmental monitoring, industrial sensing, and remote telemetry. The 1 Mbps signaling rate supports digital sensor data and control traffic, while low-current standby mode can reduce system demand when the node is not actively communicating. Designers should validate cable length, stub lengths, termination, and common-mode limits, and should use protection at exposed cable connections.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ SN65HVD52D — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | SN65HVD52DR | SN65HVD52DRG4 | SN65HVD05D | SN65HVD78D | SN65HVD37D |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 8-pin SOIC (D) | 8-pin SOIC (D) | 8-pin SOIC (D) | 8-pin SOIC (D) | 8-pin SOIC (D) | 8-pin SOIC (D) |
| Product Type | High-output full-duplex RS-485/RS-422 transceiver | High-output full-duplex RS-485/RS-422 transceiver | High-output full-duplex RS-485/RS-422 transceiver | RS-485 transceiver variant | Low-power RS-485 transceiver variant | RS-485 transceiver variant |
جیاکەرەوە سەرەکییەکان
- Full-duplex high-output interface (بەراورد بەSN65HVD05D)
- 1 Mbps signaling capability (بەراورد بەSN65HVD78D)
- Same-family footprint compatibility (بەراورد بەSN65HVD52DR)
- Large-node bus support (بەراورد بەSN65HVD37D)
تێبینییەکانی دیزاین
Route the SN65HVD52D differential pair as a tightly coupled, impedance-controlled pair and keep it away from switching nodes, clock edges, and high-current return paths. Place the device close to the cable or board-edge interface when practical, with the return path referenced to the same ground system. Follow the manufacturer recommended decoupling and layout guidance in the SN65HVD52 datasheet, especially when long external cables are connected.
Do not treat the 1 Mbps data-rate specification as an unconditional maximum cable distance. RS-485 performance depends on line rate, cable attenuation, capacitance, topology, termination, transceiver loading, and common-mode limits. Use the datasheet's transition-time and node-count guidance, avoid excessive stubs, and confirm the completed bus with a system-level signal-integrity and EMC review.
For cable-connected equipment, provide a defined chassis-to-signal-ground strategy and connector-side transient protection. The SN65HVD52D includes bus-pin ESD protection exceeding 15 kV HBM, but ESD protection is not a substitute for surge or lightning protection. Keep protection components close to the connector and control their capacitance and leakage so the 1 Mbps bus and receiver sensitivity are not unnecessarily degraded.
Estimated: with a 5 V supply and an 8 mA maximum supply-current figure, the maximum device input-power estimate is 5 V times 8 mA, or 40 mW, before accounting for dynamic and external-load effects. Actual dissipation depends on the driver state and bus termination. Use this estimate for orientation only and verify the final thermal margin from the manufacturer electrical characteristics and actual operating waveform.
زانیاری پابەندبوون
The available product references identify the SN65HVD52 family and package but do not state the requested compliance details. The device is associated with an EIA-485-A interface, but no separate compliance certification is inferred.