SN75189N - Quad RS-232 Line Receiver | Texas Instruments
MPN: SN75189N ✓ چالاکSN75189N گشتی
An RS-232 line receiver is an interface-circuit category that converts bipolar serial data signals into logic-level signals for digital equipment. The SN75189N belongs to the broader line-receiver, interface-IC, and semiconductor hierarchy. Its four-channel arrangement allows one package to receive four independent data signals while sharing a common supply and ground. This reduces component count in multi-channel equipment, test systems, industrial controllers, and computer interfaces.
Key features include four integrated receivers, a 5 V nominal operating supply, input hysteresis for improved noise immunity, and 7 kΩ input resistance. The response-control function can shift receiver thresholds or introduce input filtering by connecting suitable resistance and capacitance to the CONT terminals. These controls provide flexibility when the received signal levels, cable environment, or system noise conditions differ from standard receiver defaults.
The monolithic low-power Schottky implementation combines the four receivers in one package while retaining separate response-control inputs. The input signal range is specified as 30 V, which accommodates the voltage excursions associated with RS-232 signaling. A 7 kΩ input resistance limits loading on the transmitting side, while the receiver logic output provides a convenient interface to TTL or CMOS equipment.
Typical applications include multi-channel RS-232 data acquisition, industrial serial-port equipment, test and measurement systems, terminal interfaces, and embedded controllers requiring more than one receive function. Using four receivers in one package simplifies routing and reduces the number of interface ICs, but the system designer must still account for correct signal grounding, cable transients, unused-channel handling, and adequate supply bypassing.
For PCB implementation, place the device in accordance with the manufacturer's pin-description table and keep input and supply paths compact. Decouple the 5 V rail close to the supply pin, provide a low-impedance ground connection, and route each receiver input away from switching nodes. Confirm that every unused output has a defined downstream state and that CONT pins are configured for the intended threshold and filtering behavior.
This product record combines the manufacturer's device information, package and interface details, an RS-232-oriented engineering description, drop-in replacement analysis, comparison parameters, and practical layout guidance. It is intended to support component selection and board-level implementation without obscuring the distinctions that must be checked before approving a substitution.
جێگرەوەکانی جێگۆڕکێ بۆ SN75189N — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ SN75189N (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Input Hysteresis, Input Signal Range, Input Resistance, Package, Response Control.
SN75189AN
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
SN75189A
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
SN55189N
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
SN55189A
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
SN75C189AN
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MC1489N
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →MC1489AN
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →SN75189N تایبەتمەندییەکان
| Device Type | Quadruple RS-232 line receiver |
| Number of Receiver Channels | 4 channels |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Nominal Supply Voltage | 5 V |
| Input Resistance | 7 kΩ |
| Input Signal Range | 30 V |
| Input Hysteresis | Built-in dual-threshold hysteresis |
| Response-Control Function | Input threshold shifting and input noise filtering |
| Interface Standard | TIA/EIA-232-F |
| Logic Family | TTL-compatible line receiver |
| Technology | Monolithic low-power Schottky |
| پاکێج | 14-pin PDIP |
| جۆری دامەزراندن | Through-hole |
ڕێنمایی ڕێکخستنی پینی SN75189N 14-pin pdip
ڕێکخستنی پین بۆ SN75189N (پاکێجی 14-pin pdip). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ SN75189N.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
SN75189N گونجاوە بۆ 6 بەکارھێنانs: Multi-Channel RS-232 Data Acquisition, Industrial Serial-Port Equipment, Test and Measurement Control Systems, Legacy Computer Terminal Interfaces, Embedded Controller Serial Links, Noisy Interconnect Receivers.
Multi-Channel RS-232 Data Acquisition
The SN75189N fits systems that must receive four independent RS-232 signals while sharing one compact interface package. Its four receiver channels operate from a single 4.5 V to 5.5 V supply, reducing the number of discrete interface ICs and ground connections required on the board. The 7 kΩ input resistance limits receiver loading, while built-in input hysteresis improves switching certainty around the threshold. Designers should route each input away from switching circuitry, provide local supply bypass, and verify unused-channel behavior in the final logic design.
پێشنیارکراو
Industrial Serial-Port Equipment
The SN75189N is appropriate for industrial terminal and serial-port equipment that requires several receive channels but not four dedicated driver channels. Its monolithic low-power Schottky construction integrates four receivers into one 14-pin PDIP, simplifying assembly in systems with legacy RS-232 connectivity. The device accepts a single supply in the 4.5 V to 5.5 V region and provides per-channel response-control inputs for threshold adjustment or filtering. Industrial qualification still requires checking the operating-temperature rating, system grounding, surge exposure, and enclosure requirements.
پێشنیارکراو
Test and Measurement Control Systems
The SN75189N can receive four command or status lines from external RS-232 test equipment on a 14-pin through-hole board. Its four independent channels reduce the footprint needed for receiving multiple control signals, while hysteresis helps maintain dependable logic transitions when the interconnect or cable environment introduces noise. The response-control terminals allow each receiver to be tuned separately if threshold or filtering requirements differ. Validation should include worst-case cable length, ground-offset conditions, input signal excursions, and timing margins at the connected test instrument.
پێشنیارکراو
Legacy Computer Terminal Interfaces
The SN75189N is well suited to legacy computer and peripheral interfaces that require multiple RS-232 receive paths in a through-hole design. Four receivers in one package provide a straightforward way to recover separate control, status, or data signals. The 30 V input signal range accommodates RS-232 voltage excursions, and the 7 kΩ input resistance helps avoid excessive loading of the transmitting equipment. Designers should preserve a common signal reference, avoid long unprotected stubs, and verify that the supply remains within the stated operating range during power sequencing.
پێشنیارکراو
Embedded Controller Serial Links
The SN75189N can provide four receive channels for an embedded controller connected to RS-232 equipment through a legacy port. The 14-pin PDIP package is convenient for through-hole control boards, repairable industrial products, and prototypes where four inputs must be accepted from one remote system. Each receiver's response-control connection allows targeted threshold shifting or noise filtering. Because the device receives only, the interface must be paired with an appropriate transmitter when the controller also needs to send data, and all external protection choices must preserve valid RS-232 signal behavior.
پێشنیارکراو
Noisy Interconnect Receivers
The SN75189N is useful where received serial signals may be affected by moderate interconnect noise and need a defined switching threshold. Built-in input hysteresis provides two thresholds, reducing repeated output transitions when the input lingers near the nominal logic boundary. The independent response-control terminals can shift threshold levels or add filtering when channel requirements are not identical. Engineers should characterize the complete receiver path with the intended cable and connector, check that filtering does not distort required data timing, and include suitable transient protection at exposed interfaces.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ SN75189N — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | SN75189AN | SN75189A | SN55189N | SN55189A | SN75C189AN | MC1489N | MC1489AN |
|---|---|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Motorola | Motorola |
| Package | 14-pin PDIP | 14-pin PDIP - same | 14-pin PDIP - same | 14-pin PDIP - same | 14-pin PDIP - same | 14-pin PDIP - same | 14-pin PDIP - same | 14-pin PDIP - same |
| Receiver Channels | 4 channels | 4 channels | 4 channels | 4 channels | 4 channels | 4 channels | 4 channels | 4 channels |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Interface Reference | TIA/EIA-232-F | TIA/EIA-232-F | TIA/EIA-232-F | TIA/EIA-232-F | TIA/EIA-232-F | RS-232 receiver applications | TIA/EIA-232-F | TIA/EIA-232-F |
جیاکەرەوە سەرەکییەکان
- Four receive channels in one 14-pin package (بەراورد بەSN75C189AN)
- Individual response-control capability (بەراورد بەMC1489N)
- Single 5 V supply operation (بەراورد بەSN75189AN)
تێبینییەکانی دیزاین
Place the 14-pin PDIP in the orientation defined by the manufacturer pin-description table, and keep each receiver input away from switching nodes and high-current return paths. The four receiver inputs can share a common signal reference, but routing them as tightly coupled paths can increase crosstalk. Use a solid ground connection near the device and provide local 5 V bypass routing to minimize supply disturbance during receiver output transitions.
Use the response-control terminals to tune thresholds or filtering only after checking the receiver's documented operating regions. A resistor or resistor-and-bias network can shift thresholds, while a capacitor can reduce input noise, but excessive filtering can degrade data timing. Validate each configured channel with the longest expected cable, worst-case ground offset, and representative noise before fixing the external component values.
Do not treat the SN75189N as a bidirectional transceiver: it contains four receivers and no transmitter. A design requiring both directions of RS-232 communication needs a separate transmitter or transceiver function. Also verify the logic levels at each receiver output, the state of unused outputs, and the handling of disconnected inputs so that unused channels do not create unpredictable downstream control states.
زانیاری پابەندبوون
The available manufacturer product and datasheet summaries do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. SN75189N is a commercial interface IC, so AEC-Q100 qualification is not applicable.