SP232ACP-L - Dual RS-232 Transceiver, 120 kbps | MaxLinear, Inc.
MPN: SP232ACP-L ✓ چالاکSP232ACP-L گشتی
An RS-232 transceiver is an interface IC that converts digital logic-level signals into RS-232 line levels and converts received RS-232 signals back into logic-compatible levels. The SP232ACP-L belongs to the RS-232 transceiver category, which sits within interface ICs and broader semiconductor communication devices. It is intended for point-to-point serial links where the connected equipment uses the EIA/TIA-232 and V.28 protocols.
The SP232ACP-L integrates two drivers and two receivers, allowing one interface IC to support a full bidirectional serial channel. Its 120 kbps under-load capability is suitable for data acquisition, industrial control, instrumentation, and legacy peripheral connections. The single 5 V supply simplifies power design, while 0.1 µF charge-pump capacitors provide a practical option for compact circuit boards.
Because the device is pin-to-pin compatible with popular industry-standard RS-232 layouts, it can support straightforward replacement of compatible interface hardware. The single 5 V supply simplifies power design, while 0.1 µF charge-pump capacitors provide a practical option for compact circuit boards.
The SP232ACP-L is suitable for industrial equipment, test and measurement systems, point-of-sale terminals, embedded serial controllers, and instrumentation with RS-232 ports. Its 0 °C to 70 °C commercial temperature range suits indoor equipment where an extended-temperature component is unnecessary. Systems exposed to temperature extremes or severe conducted noise should verify environmental requirements separately.
The primary design consideration is correct charge-pump capacitor placement. The specified 0.1 µF capacitors should be connected exactly as shown in the manufacturer datasheet, with short traces and a solid ground reference. Designers should also account for RS-232 cable-length, grounding, and signal-integrity requirements rather than treating the transceiver as a general-purpose logic buffer.
This product record consolidates verified supply, protocol, package, temperature, ESD, and data-rate information with practical selection guidance. It also distinguishes the SP232ACP-L from a cross-brand RS-232 alternative while clearly identifying which additional comparison data remain unavailable from the supplied sources.
جێگرەوەکانی جێگۆڕکێ بۆ SP232ACP-L — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ SP232ACP-L (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Product Type, Mounting Type, Interface Standard, Maximum Data Rate.
MAX232CPE+
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
SP232ACP-L تایبەتمەندییەکان
| Product Type | RS-232 line driver and receiver transceiver |
| Driver Count | 2 drivers |
| Receiver Count | 2 receivers |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Nominal Supply Voltage | 5 V |
| Maximum Data Rate | 120 kbps under load |
| پاکێج | 16-pin PDIP |
| مەودای پلەی گەرمیی کارکردن | 0 °C to 70 °C |
| ESD Protection | 2 kV |
| Charge-Pump Capacitor | 0.1 µF |
| Protocol Compliance | EIA/TIA-232 and V.28 |
| RS-232 Standards Compatibility | RS-232D |
| Logic Compatibility | Pin-to-pin compatible with popular industry-standard pinouts |
| شێوازی دامەزراندن | Through-hole PDIP |
ڕێنمایی ڕێکخستنی پینی SP232ACP-L 16-pin pdip
ڕێکخستنی پین بۆ SP232ACP-L (پاکێجی 16-pin pdip). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ SP232ACP-L.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
SP232ACP-L گونجاوە بۆ 6 بەکارھێنانs: Industrial Instrument Serial Port, Embedded Controller RS-232 Communication, Test and Measurement Equipment, Point-of-Sale and Peripheral Connectivity, Data Acquisition and Control Systems, Legacy Computer Serial Adapter.
Industrial Instrument Serial Port
The SP232ACP-L fits legacy industrial instruments that expose an EIA/TIA-232 or V.28 serial port. Its two drivers and two receivers support a complete point-to-point link, while the 120 kbps under-load data rate covers many measurement and configuration protocols. The 4.5 V to 5.5 V supply range integrates with common 5 V embedded systems, and 0.1 µF charge-pump capacitors limit the external support circuitry. For factory equipment, keep the 0 °C to 70 °C rating in view and provide additional protection if cables leave a controlled enclosure.
Embedded Controller RS-232 Communication
The SP232ACP-L can connect a microcontroller or embedded controller to a conventional RS-232 peripheral without a separate level-shifting assembly. Two transmitters and two receivers allow multiple logic signals to cross the interface, while the internally generated RS-232 levels eliminate the need for external bipolar voltage rails. Its 120 kbps under-load rate is suitable for command, status, and low-volume data exchanges. Designers should validate logic thresholds and timing against the host device, and they should follow the manufacturer’s exact charge-pump capacitor layout for reliable operation.
Test and Measurement Equipment
The SP232ACP-L is appropriate for bench instruments, programmable power supplies, and data-acquisition units that retain a traditional RS-232 command interface. The 120 kbps under-load specification supports many low- and moderate-speed instrument-control protocols, while EIA/TIA-232 and V.28 compatibility helps preserve legacy interoperability. Its single 4.5 V to 5.5 V supply simplifies internal power distribution, and the 16-pin PDIP package is straightforward to assemble in through-hole laboratory hardware. USB-to-RS-232 adapters remain useful when newer host connectivity is required.
Point-of-Sale and Peripheral Connectivity
The SP232ACP-L can provide a wired RS-232 interface in point-of-sale terminals, scales, printers, and other peripheral systems designed around EIA/TIA-232. It combines two drivers and two receivers in one package, supporting bidirectional command and status traffic over a point-to-point cable. The 120 kbps under-load rate exceeds the needs of many legacy peripherals, and the 5 V supply requirement is compatible with established embedded hardware. Designers should still account for cable length, ground references, connector pin assignments, and protection appropriate to the installation environment.
Data Acquisition and Control Systems
The SP232ACP-L serves as the interface between an embedded controller and external sensors, analyzers, or laboratory modules using RS-232. The device supports two transmit and two receive channels, while its 120 kbps under-load rate is suitable for many command-oriented data-acquisition workflows. The 4.5 V to 5.5 V operating range and 0.1 µF charge-pump capacitors simplify implementation in compact acquisition controllers. For safety-critical or widely distributed installations, engineers should add surge and cable protection, validate grounding, and confirm that the commercial 0 °C to 70 °C range meets the ambient requirements.
Legacy Computer Serial Adapter
The SP232ACP-L can be used in legacy computer interfaces, terminal boards, and controller cards that require a native RS-232 port. Its compatibility with popular industry-standard pinouts simplifies board-level integration, while the integrated charge-pump circuit removes the need for a discrete bipolar RS-232 supply. The 120 kbps under-load rate suits older peripherals and configuration links rather than high-speed protocols. Because the device is a PDIP package, it is most practical for through-hole industrial or legacy products; modern compact products may prefer an SMD transceiver with verified pin compatibility.
داتای سەرچاوەی ئەندازیاری بۆ SP232ACP-L — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | MAX232CPE+ |
|---|---|---|
| Package | 16-pin PDIP | 16-pin PDIP |
| Brand | MaxLinear, Inc. | Maxim Integrated |
جیاکەرەوە سەرەکییەکان
- Documented under-load data rate (بەراورد بەMAX232CPE+)
- Verified commercial operating range (بەراورد بەMAX232CPE+)
- Specified charge-pump implementation (بەراورد بەMAX232CPE+)
تێبینییەکانی دیزاین
Place the 0.1 µF charge-pump capacitors exactly as shown in the manufacturer datasheet and keep their connections short. The SP232ACP-L generates RS-232 levels internally, so incorrect capacitor placement or long charge-pump traces can degrade output amplitude and reliability. Preserve a continuous ground path beneath the device and route the RS-232 driver outputs away from sensitive receiver inputs and clocks.
Do not treat the SP232ACP-L as a 5 V logic-level RS-232 line driver. Although it operates from a single 4.5 V to 5.5 V supply, its driver outputs use bipolar RS-232 signaling rather than ordinary CMOS levels. Also verify that the 0 °C to 70 °C operating range meets the product’s ambient requirements. The supplied sources do not verify RoHS, REACH, AEC-Q100, or lead-free status, so those claims must be confirmed separately.
The 120 kbps under-load capability makes the SP232ACP-L appropriate for legacy point-to-point links, but cable routing still affects signal integrity. Keep RS-232 traces away from switching nodes and high-current edges, use a defined signal ground, and install suitable protection where cables cross industrial boundaries. The 2 kV ESD rating is a verified device attribute, yet connector-side protection and chassis grounding remain important in electrically noisy installations.
زانیاری پابەندبوون
The supplied distributor excerpts do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals compliance. The -L suffix alone was not treated as proof of any compliance claim.