MaxLinear

SP3232ECT-L/TR - 2/2 RS-232 Transceiver | MaxLinear

MPN: SP3232ECT-L/TR ✓ چالاک
3 V to 5.5 V Vdss 1 µA Id 16-SOIC Package
MOQ: 1 |

SP3232ECT-L/TR گشتی

The MaxLinear SP3232ECT-L/TR is a 2-driver, 2-receiver RS-232 transceiver operating from a 3 V to 5.5 V single supply in a 16-pin SOIC package. It supports a minimum data rate of 120 kbit/s under full load and uses a charge-pump supply requiring only 0.1 µF capacitors in 3.3 V operation. The device is supplied in tape-and-reel packaging for automated assembly.

An RS-232 transceiver is an interface IC that combines differential line drivers and receivers for point-to-point serial communication. It belongs to the transceiver and driver/receiver hierarchy within interface ICs, translating low-voltage digital logic levels into RS-232-compatible levels and converting received signals back into digital logic. This bidirectional level conversion allows equipment such as computers, test instruments, industrial controllers, and portable devices to communicate with legacy RS-232 equipment.

The SP3232E series includes an efficient on-chip charge-pump supply, allowing true RS-232 operation from a single 3 V to 5.5 V rail. The manufacturer identifies the SP3232E family as meeting true EIA/TIA-232-F requirements from a supply as high as 5.5 V. A shutdown mode provides 1 µA low-power operation with receivers active, making the device useful in battery-powered portable equipment where unused drivers can be disabled without losing incoming data.

The integrated 2/2 channel arrangement supports two RS-232 links through one compact IC. The 16-SOIC package is significantly smaller than most legacy DB9 connector implementations and is suitable for compact embedded products. Its 120 kbit/s minimum rate under full load is appropriate for serial console links, configuration interfaces, point-of-sale equipment, industrial service ports, and legacy peripheral connectivity rather than high-speed storage protocols.

Typical uses include portable computers and handheld terminals, because the low-voltage supply and low-power shutdown suit constrained systems. The part can also bridge modern UART logic to RS-232 equipment, provide console access in industrial equipment, and support service interfaces where legacy compatibility remains necessary. The 3 V to 5.5 V operating range permits direct use from both 3.3 V and 5 V systems.

Designers should follow the manufacturer’s recommended charge-pump capacitor network, place it close to the device, and provide the specified input and output bypass capacitance. Verify signal levels against the selected logic supply, keep RS-232 drivers away from sensitive analog circuitry, and review the EN and shutdown functions when power sequencing matters. Confirm the complete pin description and exposed-pad requirements against the current manufacturer datasheet before layout release.

جێگرەوەکانی جێگۆڕکێ بۆ SP3232ECT-L/TR — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ SP3232ECT-L/TR (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Supply Voltage Range, Packaging, Product Type, Mounting Type.

Texas Instruments
Package: 16-pin TSSOP
Supply Voltage Range: 3V to 5.5V
Product Type: Dual RS-232 line driver and receiver
MaxLinear
Package: 20-TSSOP (Y), 4.40 mm body width
Packaging: Tape & Reel (TR)
MaxLinear
Supply Voltage Range: +3.0 V to +5.5 V
Packaging: Tube
Product Type: 2/2 RS-232 transceiver
MaxLinear
Supply Voltage Range: +3.0 V to +5.5 V
Packaging: Tube
Product Type: 2/2 RS-232 transceiver
MaxLinear
Package: 16-pin SSOP
Product Type: RS-232 transceiver
Mounting Type: SMD
MaxLinear
Package: WSOIC-16
MaxLinear
Mounting Type: Surface mount

SP3232EEN-L/TR

✅ جێگرەوەی ڕاستەوخۆ
MaxLinear
📦 16-SOIC
2/2 transceiver, full RS-232 · 2 · 2 · 120 kbps · 3 V to 5.5 V · 1 mA · 1 µA · -40°C to +85°C

پەیوەندی بۆ نرخ

بینینی داتاشیت →

SP3232ECA-L/TR

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
MaxLinear
📦 16-SOIC
RS-232 transceiver · 2/2 full-duplex · 2 · 2 · 120 kbps · 3.0 V to 5.5 V · 1 mA · 0.1 µF

پەیوەندی بۆ نرخ

بینینی داتاشیت →

SP3232ET-L/TR

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 16-SOIC
Driver count remains 2 and receiver count remains 2, a 0% change in channel configuration; the ordering grade differs from the target.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

SP3232EET-L/TR

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
MaxLinear
📦 16-SOIC
RS-232 transceiver · 2 transmit / 2 receive channels · +3.0 V to +5.5 V · 120 kbps · 1 mA · -40 C to +85 C · 16-SOIC · RS-232 / EIA/TIA-232-F

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MAX3232EWE+

✅ جێگرەوەی ڕاستەوخۆ
📦 16-SOIC
Driver count remains 2 and receiver count remains 2, a 0% change in channel configuration; enable polarity and external capacitor values must be cross-checked.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

MAX3232IPW

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 16-SOIC
Dual RS-232 line driver and receiver · 2 channels · 2 channels · 3V to 5.5V · 250kbit/s · ±15kV · 5V logic · 0.1µF

پەیوەندی بۆ نرخ

بینینی داتاشیت →

SP3232ECT-L/TR تایبەتمەندییەکان

Device Type 2/2 RS-232 transceiver
Number of Drivers 2
Number of Receivers 2
Supply Voltage Range 3 V to 5.5 V
Minimum Data Rate Under Full Load 120 kbit/s
RS-232 Compliance True EIA/TIA-232-F
Shutdown Current With Receivers Active 1 µA
Charge-Pump Capacitance at 3.3 V 0.1 µF
پاکێج 16-SOIC
Package Width 7.50 mm
Package Length 0.295 inch
جۆری دامەزراندن Surface mount
Packaging Tape and reel

ڕێکخستنی پینی SP3232ECT-L/TR

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
پین 1 R1OUT — Receiver 1 output
پین 2 R2OUT — Receiver 2 output
پین 3 R2IN — Receiver 2 input
پین 4 R1IN — Receiver 1 input
پین 5 V- — Negative charge-pump voltage output
پین 6 RECEIVE_EN — Receive-enable control input
پین 7 NC — Not connected
پین 8 GND — Ground
پین 9 NC — Not connected
پین 10 NC — Not connected
پین 11 VCC — Positive supply input
پین 12 V+ — Positive charge-pump voltage output
پین 13 T1IN — Driver 1 logic input
پین 14 T2IN — Driver 2 logic input
پین 15 T1OUT — Driver 1 RS-232 output
پین 16 T2OUT — Driver 2 RS-232 output

بەکارهێنانە باوەکان

SP3232ECT-L/TR گونجاوە بۆ 6 بەکارھێنانs: Portable RS-232 Data Links, Industrial Equipment Console, Point-of-Sale Terminal Interface, Instrumentation and Test Equipment, Embedded System Debug Interface, Legacy Peripheral Connectivity.

📱

Portable RS-232 Data Links

The SP3232ECT-L/TR fits portable and handheld equipment that must retain a legacy RS-232 connection while operating from a low-voltage internal rail. Its 3 V to 5.5 V supply range supports 3.3 V and 5 V systems, while the manufacturer specifies 1 µA shutdown current with receivers active. That shutdown behavior is useful when the transmitting function is intermittent but incoming status or control data must remain available. The 2/2 arrangement provides two communication channels in one 16-SOIC package, helping conserve board area compared with separate driver and receiver ICs.

🏭

Industrial Equipment Console

The SP3232ECT-L/TR can provide a compact service-console connection between a modern controller UART and an RS-232 terminal. Its 120 kbit/s minimum rate under full load is appropriate for interactive diagnostics, configuration commands, and service logs. Two drivers and two receivers allow a board to implement bidirectional command and status channels without using multiple interface packages. The 3 V to 5.5 V operating range supports industrial control boards built around either 3.3 V or 5 V logic, subject to the system’s temperature and transient requirements.

🖥️

Point-of-Sale Terminal Interface

A point-of-sale terminal or peripheral can use the SP3232ECT-L/TR to bridge a low-voltage UART to an RS-232 receipt printer, scanner, or customer-display device. The 120 kbit/s minimum data rate under full load provides ample margin for typical transaction traffic and control protocols. Its 16-SOIC package reduces PCB area, while the integrated 2/2 channel count can support two ports if the system has more than one legacy accessory. The single 3 V to 5.5 V supply also simplifies power design in compact peripherals.

🔧

Instrumentation and Test Equipment

The SP3232ECT-L/TR is suitable for instrumentation that retains an RS-232 control or calibration interface while using a modern mixed-signal or digital control board. The 2/2 arrangement can handle one command link and one status link, while 120 kbit/s operation is sufficient for many legacy test protocols. Its low-voltage supply support simplifies integration with 3.3 V control logic, and the 1 µA receiver-active shutdown mode helps reduce power in portable instruments. For safety-critical measurements, separate RS-232 circuitry from analog nodes and use appropriate external protection.

🧩

Embedded System Debug Interface

The SP3232ECT-L/TR can serve as an RS-232 debug or manufacturing interface on embedded controller boards. Many legacy programmers, boot loaders, and configuration tools use RS-232, while current processors expose UART signals at much lower logic voltages. The device translates those signals using two receivers and two drivers in a compact 16-SOIC package. Its 3.3 V compatibility avoids an unnecessary level translator when system logic operates from a 3.3 V rail, and the 120 kbit/s capability is more than adequate for text-based debug sessions and firmware update protocols.

💻

Legacy Peripheral Connectivity

The SP3232ECT-L/TR provides a practical bridge between a modern serial controller and legacy peripherals that expose only RS-232. The 2/2 channel arrangement can support a printer or scanner alongside a second control device, while the 120 kbit/s minimum data rate under full load accommodates conventional peripheral traffic. The 16-SOIC format is compact for retrofit boards, and the 3 V to 5.5 V range allows operation beside several generations of digital logic. Designers should verify the legacy device’s voltage, handshake behavior, and connector pinout before finalizing the interface.

What are the key specifications of SP3232ECT-L/TR that engineers should know?
The SP3232ECT-L/TR is a 2-driver, 2-receiver RS-232 transceiver with a 3 V to 5.5 V supply range, a 120 kbit/s minimum data rate under full load, and a 16-SOIC package. According to the MaxLinear SP3232E product page and manufacturer datasheet, the charge-pump arrangement requires 0.1 µF capacitors at 3.3 V and supports true EIA/TIA-232-F operation.
Where can I download the SP3232ECT-L/TR datasheet PDF?
The official SP3232E documentation is available through MaxLinear’s product page at https://www.maxlinear.com/sp3232e. The target MPN is a 16-SOIC, tape-and-reel ordering variant of the SP3232E family. Use the manufacturer’s pin description, electrical characteristics, and recommended external-capacitor sections when releasing the PCB layout.
Where can I find the SP3232ECT-L/TR pinout?
The SP3232ECT-L/TR pinout is defined by the 16-SOIC pin-description table in the MaxLinear SP3232E manufacturer datasheet. Assign signals from that table rather than relying on the similar MAX3232 family, because enable, shutdown, charge-pump, and receiver functions must be checked for each orderable suffix.
What is the SP3232ECT-L/TR supply voltage range?
The SP3232ECT-L/TR operates from 3 V to 5.5 V. According to the manufacturer datasheet, the SP3222E/SP3232E family supports single-supply true RS-232 operation across this range, making the interface suitable for both 3.3 V and 5 V UART systems. External bypass and charge-pump capacitors should follow the datasheet values and placement guidance.
What data rate does the SP3232ECT-L/TR support?
The SP3232ECT-L/TR supports a minimum data rate of 120 kbit/s under full load. This rate is suitable for RS-232 console, service, configuration, and legacy peripheral links. According to the manufacturer datasheet, it meets true EIA/TIA-232-F requirements and is not intended for modern high-speed serial protocols.
Does the SP3232ECT-L/TR support 3.3 V operation?
Yes, the SP3232ECT-L/TR supports operation from a single 3 V supply, and its charge-pump supply requires only 0.1 µF capacitors in 3.3 V operation. According to the MaxLinear SP3232E documentation, this low-voltage capability is intended for portable and handheld equipment using RS-232 links.
What is the shutdown current of the SP3232ECT-L/TR?
The SP3232ECT-L/TR has a shutdown current of 1 µA with the receivers active. According to the manufacturer datasheet, this allows transmitters to be disabled while incoming RS-232 data remains available. It is particularly useful for portable systems that intermittently use a communications port.
Can the SP3232ECT-L/TR be used for a UART console port?
Yes, the SP3232ECT-L/TR is appropriate for a compact UART-to-RS-232 console port. Its 2/2 arrangement supports two communication channels, and its 120 kbit/s minimum rate under full load is more than adequate for terminal access and service commands. Use the correct UART logic levels and the manufacturer’s recommended RS-232 protection network.
Is SP3232ECT-L/TR suitable for portable and battery-powered equipment?
Yes, the SP3232ECT-L/TR fits portable and battery-powered equipment because it accepts a 3 V to 5.5 V supply and enters a 1 µA shutdown state with receivers active. According to the SP3232E manufacturer documentation, the high-efficiency charge pump also reduces the external capacitor requirement to 0.1 µF at 3.3 V.
What is the difference between SP3232ECT-L/TR and SP3232EEN-L/TR?
Both devices are members of the SP3232E 2/2 RS-232 transceiver family and use the same 16-SOIC interface arrangement. Their ordering suffixes identify different manufacturer-defined grade or packaging configurations, so the exact temperature, marking, and tape-and-reel details must be checked before interchange. The SP3232EEN-L/TR appears in the manufacturer family cross-reference material.
What is the best drop-in replacement for SP3232ECT-L/TR?
The SP3232EEN-L/TR is the closest same-family replacement candidate because it retains the 2/2 RS-232 architecture, 3 V to 5.5 V supply operation, and 16-SOIC package. Verify the datasheet pin table, temperature grade, and marking against the installed design before substitution. Request a Quote for current availability and device-specific sourcing.
Can MAX3232EWE+ replace SP3232ECT-L/TR?
The MAX3232EWE+ is a cross-brand 2/2 RS-232 transceiver candidate in a 16-SOIC package, and comparison data identifies it against the SP3232ECT-L family. It can be considered a drop-in candidate only after confirming every pin, enable polarity, charge-pump capacitor, and operating condition against both manufacturer datasheets.
When should I choose SP3232ECT-L/TR instead of MAX3232IPW?
Choose SP3232ECT-L/TR when the design specifically requires the MaxLinear SP3232E implementation, including its documented 1 µA shutdown behavior with receivers active and 3.3 V charge-pump operation. The MAX3232IPW is a separate manufacturer’s 16-SOIC option, so switching should follow a complete pin, timing, capacitance, and qualification review rather than package similarity alone.
Where to buy SP3232ECT-L/TR online?
Use the Request a Quote form on this page to request SP3232ECT-L/TR pricing, current stock, lead time, and the required tape-and-reel quantity. The target is identified as a 16-SOIC, tape-and-reel ordering variant with 2 drivers and 2 receivers. Include your target quantity and manufacturing schedule in the request.
What is the price and lead time for SP3232ECT-L/TR?
Current price and lead time for SP3232ECT-L/TR should be obtained through the Request a Quote form on this page because quotation terms can change with quantity, packaging, and supply conditions. The manufacturer ordering configuration is 16-SOIC, tape and reel. Provide the annual and prototype quantities to receive the most applicable commercial response.

داتای سەرچاوەی ئەندازیاری بۆ SP3232ECT-L/TR — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the SP3232ECT-L/TR when a compact board needs two RS-232 channels, a 3 V to 5.5 V supply, and the documented benefit of 1 µA shutdown with receivers active. It is especially suitable for portable equipment, service consoles, embedded debug ports, and legacy peripheral interfaces operating at no more than the specified 120 kbit/s rate. SP3232E family variants may be preferable when an approved ordering grade or exact manufacturer marking is required, but every alternative must be checked against the target pinout and temperature specifications. Cross-brand 16-SOIC options can simplify procurement when their pin functions, enable polarity, capacitor requirements, and electrical ratings match. Do not choose solely by package or channel count: legacy systems can depend on unusual driver-input polarity, shutdown behavior, or connector timing. Request the current manufacturer datasheet for each candidate and complete a board-level review before approving a substitution.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە SP3232EEN-L/TR SP3232ECA-L/TR SP3232ET-L/TR SP3232EET-L/TR MAX3232EWE+ MAX3232IPW
Brand MaxLinear MaxLinear MaxLinear MaxLinear MaxLinear Analog Devices Analog Devices
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Driver and Receiver Count 2/2 2/2 2/2 2/2 2/2 2/2 2/2

جیاکەرەوە سەرەکییەکان

  • Receiver-active low-power shutdown (بەراورد بەMAX3232EWE+)
  • Single low-voltage supply with compact charge-pump support (بەراورد بەMAX3232IPW)
  • Two full-duplex RS-232 channels in one package (بەراورد بەSP232AET-L/TR)

تێبینییەکانی دیزاین

Place the charge-pump and bypass capacitors close to their associated SP3232ECT-L/TR pins, following the manufacturer’s reference layout. The manufacturer specifies 0.1 µF charge-pump capacitance for 3.3 V operation. Keep the high-voltage RS-232 nodes away from low-level logic and sensitive analog traces, and provide a direct ground return for the interface region.

Use the manufacturer’s RS-232 output and receiver characteristic limits when defining cable length and baud rate. The target is specified for at least 120 kbit/s under full load, but real installation performance also depends on cable impedance, grounding, connector workmanship, and electromagnetic conditions. Avoid substituting high-speed differential or RS-485 routing assumptions for this single-ended interface.

Do not treat the 16-SOIC outline alone as proof that another RS-232 transceiver is interchangeable. Confirm every receiver, driver, enable, shutdown, supply, and charge-pump connection against the manufacturer’s pin-description table. Also verify whether a logic input is referenced to VCC or GND, because UART TX and RX polarity conventions can differ between RS-232 transceiver families.

Decouple the VCC supply locally and follow the recommended capacitor values and tolerances from the manufacturer datasheet. The SP3232ECT-L/TR operates across 3 V to 5.5 V, so the selected bypass network must remain valid at the lowest rail voltage and the highest switching activity. Confirm that receiver-active shutdown behavior matches the product’s system-level power-sequencing plan.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The manufacturer page and datasheet-family information were available, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified for the exact ordering variant. The interface IC is not presented as an AEC-Q100 automotive-qualified device.

داتا پشتڕاستکراوەتەوە لە: 2026-11-03 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

SP3232ECT-L/TR SP3232ECT-L/TR datasheet SP3232ECT-L/TR datasheet pdf SP3232ECT-L/TR pinout SP3232ECT-L/TR equivalent SP3232ECT-L/TR replacement SP3232ECT-L/TR price SP3232ECT-L/TR stock MaxLinear SP3232ECT-L/TR SP3232ECT-L/TR 3.3V RS-232 SP3232ECT-L/TR 16-SOIC SP3232ECT-L/TR UART console SP3232ECT-L/TR vs MAX3232IPW SP3232ECT-L/TR vs MAX3232EWE+

پێکهاتە و زاراوە پەیوەندیدارەکان

MaxLinear SP3232ECT-L/TR SP3232E SP3232EEN-L/TR SP3232ECA-L/TR MAX3232EWE+ MAX3232IPW RS-232 transceiver RS-232 interface line driver line receiver interface IC semiconductor EIA/TIA-232-F charge-pump supply 3.3 V operation UART 120 kbit/s 16-SOIC SOIC family surface-mount package shutdown current portable equipment industrial service console legacy peripheral connectivity
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ