STM32F071C8T6 - 48MHz Cortex-M0 64KB MCU | STMicroelectronics
MPN: STM32F071C8T6 ✓ چالاکSTM32F071C8T6 گشتی
An STM32F0 microcontroller is an embedded microcontroller, a category within semiconductor devices that combines a processor core, memory, peripherals, and communication interfaces on one integrated circuit. The STM32F071C8T6 belongs to the STM32F071x8/xB family and uses the Arm Cortex-M0 RISC core. Its architecture is suited to control, monitoring, communication, and general-purpose embedded products where a compact 32-bit processor is useful without requiring the performance and memory of a higher-end Cortex-M series.
The verified specifications emphasize three headline characteristics: a 48 MHz maximum operating frequency, 64 KB of embedded Flash memory, and a 48-pin LQFP package. The Cortex-M0 instruction set provides a straightforward 32-bit processing platform for firmware-driven products. The 64 KB Flash capacity is appropriate for firmware, configuration data, boot code, and application logic in cost-sensitive embedded designs. The LQFP-48 package provides 48 external leads and is suitable for conventional PCB assembly and inspection processes.
The ST product-page description identifies the STM32F071x8/xB family as incorporating the high-performance Arm Cortex-M0 32-bit RISC core operating at up to 48 MHz. The family data also lists 12 timers, ADC, DAC, and communication interfaces, while the manufacturer datasheet result specifies a 2.0 V to 3.6 V operating range. Exact peripheral counts, pin functions, memory-map details, current consumption, and electrical limits for the exact STM32F071C8T6 ordering code should be confirmed in the manufacturer datasheet before a design is released.
Typical uses include industrial control and monitoring, sensor interfaces, compact consumer products, communication modules, and low-cost embedded control boards. The 48 MHz Cortex-M0 core can handle responsive control loops and protocol servicing, while the 64 KB Flash budget supports moderate application firmware. The 48-pin LQFP package is appropriate when a design needs more external pins than a small-outline package while retaining a straightforward assembly process.
The principal design consideration is power-supply and peripheral validation. The verified operating range is 2.0 V to 3.6 V, so the board supply, decoupling, I/O levels, and any communication peripherals must be selected consistently. Engineers should also check the exact pin assignment and alternate-function mapping in the ST datasheet before assigning signals, particularly for ADC, DAC, timers, and communication interfaces.
This product page consolidates verified distributor pricing, manufacturer family information, package details, application guidance, and structured design notes. It is intended to help engineers and purchasers evaluate the STM32F071C8T6 efficiently while directing them to the official STMicroelectronics datasheet and product page for authoritative final validation.
جێگرەوەکانی جێگۆڕکێ بۆ STM32F071C8T6 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ STM32F071C8T6 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Flash Memory, Architecture, Core, Mounting Type.
STM32F072C8T6
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32F071CBT6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32F071C8T6TR
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32F071R8T6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32F072CBT6
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32F071C8T6 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Core | Arm Cortex-M0 32-bit RISC |
| Maximum Operating Frequency | 48 MHz |
| Embedded Flash Memory | 64 KB (64K x 8) |
| Operating Voltage Range | 2.0 V to 3.6 V |
| Nominal Supply Levels | 2.5 V / 3.3 V |
| پاکێج | 48-pin LQFP (7 x 7 mm) |
| جۆری دامەزراندن | Surface Mount |
| Product Family | STM32F071x8/xB |
| Timer Count | 12 timers |
| Analog Converter | ADC |
| Analog Output | DAC |
| Communication Interfaces | Communication interfaces |
| Bit Architecture | 32-bit |
| Manufacturer Product Family | STM32F0 |
ڕێنمایی ڕێکخستنی پینی STM32F071C8T6 48-pin lqfp (7 x 7 mm)
ڕێکخستنی پین بۆ STM32F071C8T6 (پاکێجی 48-pin lqfp (7 x 7 mm)). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ STM32F071C8T6.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
STM32F071C8T6 گونجاوە بۆ 6 بەکارھێنانs: Industrial Control and Monitoring, Sensor and Condition Monitoring, Communication Gateway Module, Consumer Accessory Controller, Programmable Logic Controller, Battery-Powered Embedded Device.
Industrial Control and Monitoring
STM32F071C8T6 fits compact industrial control boards that need responsive 32-bit firmware without a large processor footprint. Its 48 MHz Arm Cortex-M0 core provides the processing headroom for state machines, debouncing, alarms, and communication service tasks, while 64 KB Flash stores application code, calibration constants, and configuration data. The 48-pin LQFP exposes a larger pin count than small-outline packages, supporting external sensors, actuators, status indicators, and service interfaces. Because the verified operating range is 2.0 V to 3.6 V, the board should use a regulated 3.3 V rail and validated logic levels. Final peripheral assignments, isolation boundaries, and environmental ratings should be confirmed against the ST datasheet.
پێشنیارکراو
Sensor and Condition Monitoring
The STM32F071C8T6 is suitable for embedded sensing and condition-monitoring products that periodically acquire analog or digital inputs, process them, and report results. The family information identifies ADC and DAC capability alongside 12 timers, supporting sampled measurements, threshold control, and periodic updates. A 48 MHz Cortex-M0 core can service multiple interrupt-driven sensors while the 64 KB Flash budget holds moderate firmware and calibration data. The LQFP-48 package is useful when a monitoring board needs numerous external signal connections or communication pins. Designers must verify ADC accuracy, timer channels, DAC availability for the exact suffix, and 2.0 V to 3.6 V supply behavior in the official manufacturer documentation.
پێشنیارکراو
Communication Gateway Module
STM32F071C8T6 can serve as the application processor in a compact gateway or protocol-conversion module. Its Cortex-M0 architecture and 48 MHz operating frequency support packet handling, command parsing, and protocol state management, while 64 KB Flash accommodates gateway firmware and protocol tables. The 48-pin LQFP provides access to multiple UART, SPI, I2C, and interrupt-driven peripheral functions, subject to the exact pin mapping. Compared with a larger application processor, the STM32 approach can reduce board complexity and cost. Keep trace routing and power-supply design deterministic, validate signal-level compatibility with attached transceivers, and confirm the complete peripheral configuration before production release.
پێشنیارکراو
Consumer Accessory Controller
STM32F071C8T6 is appropriate for low-cost consumer accessories requiring responsive button handling, LED control, motor or relay sequencing, and local configuration. The 48 MHz Cortex-M0 core provides quick response for human-interface tasks, and 64 KB Flash is sufficient for moderate embedded firmware without requiring an external memory device. The LQFP-48 package supports accessible assembly and inspection but occupies more PCB area than a compact DFN or QFN option. A 3.3 V implementation should include adequate bulk and bypass capacitance, while firmware should handle debounce, fault states, and brownout behavior. Validate the exact pinout, current budget, and peripheral availability before selecting it for a new compact accessory.
پێشنیارکراو
Programmable Logic Controller
The STM32F071C8T6 can be applied to small programmable logic controller and relay-control platforms where deterministic periodic execution, digital I/O, timers, and communications are required. Its 48 MHz Cortex-M0 core is appropriate for scanning inputs, executing control logic, and driving outputs, while 12 timers in the family can support timing-related functions. The LQFP-48 package provides enough physical connections for input groups, output groups, communications, programming, and status feedback. The design should maintain clean separation between noisy relay or power stages and the MCU supply, use appropriate protection networks, and verify that the exact device exposes every required timer and interface on the selected pins.
پێشنیارکراو
Battery-Powered Embedded Device
STM32F071C8T6 can support battery-powered embedded devices where a modest 32-bit controller is preferred over a higher-power processor. The 48 MHz Cortex-M0 core provides adequate responsiveness for low-duty-cycle sensing, display updates, and control tasks, while the 64 KB Flash budget is useful for compact embedded applications. Low-power performance is not quantified in the supplied verified data, so battery-life estimates must be based on the official datasheet rather than assumptions. The 2.0 V to 3.6 V range supports compatible supply designs, but regulator efficiency, quiescent current, wake-up behavior, and analog accuracy all affect the final energy budget and must be measured during prototype validation.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ STM32F071C8T6 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | STM32F072C8T6 | STM32F071CBT6 | STM32F071C8T6TR | STM32F071R8T6 | STM32F072CBT6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 48-pin LQFP (7 x 7 mm) | 48-pin LQFP - same | 48-pin LQFP - same | 48-pin LQFP - same | 48-pin LQFP - same | 48-pin LQFP - same |
| Processor Core | Arm Cortex-M0 32-bit RISC | Arm Cortex-M0 32-bit RISC | Arm Cortex-M0 class | Arm Cortex-M0 32-bit RISC | Arm Cortex-M0 class | Arm Cortex-M0 class |
| Maximum Frequency | 48 MHz | 48 MHz | 48 MHz class | 48 MHz | 48 MHz class | 48 MHz class |
| Operating Voltage | 2.0 V to 3.6 V | 2.5 V / 3.3 V class | 2.0 V to 3.6 V family basis | 2.0 V to 3.6 V family basis | 2.0 V to 3.6 V family basis | 2.0 V to 3.6 V family basis |
| Family Specialization | STM32F071x8/xB | STM32F072 | STM32F071 | STM32F071x8/xB | STM32F071 | STM32F072 |
جیاکەرەوە سەرەکییەکان
- Exact 64 KB Flash configuration for the verified device (بەراورد بەSTM32F072C8T6)
- 48 MHz Cortex-M0 processing basis (بەراورد بەSTM32F072C8T6)
- Directly identified STMicroelectronics 48-pin LQFP configuration (بەراورد بەSTM32F071R8T6)
تێبینییەکانی دیزاین
Design the supply for the verified 2.0 V to 3.6 V device range and use 3.3 V when the connected peripherals support that level. Place the required bulk and bypass capacitors at the STM32F071C8T6 power pins and keep the supply return path continuous beneath the device. Because the verified data does not specify quiescent current, input current, or brownout behavior, these values must be obtained from the manufacturer datasheet before sizing a regulator or battery.
Use the manufacturer LQFP-48 footprint and verify all pin assignments against the official STM32F071x8/xB datasheet before routing. The verified search results establish a 48-pin 7 x 7 mm LQFP package but do not provide the complete numbered pin table. Do not infer analog, timer, debug, or communication pin locations from family diagrams; doing so can create electrical or firmware incompatibilities even when the board outline is correct.
Separate communication or high-current output routing from sensitive analog inputs, and keep decoupling connections short and symmetrical. If the MCU drives relays, motors, LEDs, or other switching loads, use the package pins only after confirming drive-current limits and pin-multiplex alternatives in the datasheet. Grounding and return-current planning are particularly important in compact products because a 48 MHz control loop can expose timing and supply-noise problems that appear only under load.
Do not treat a shared package and clock rating as proof that every alternate MPN is a universal drop-in replacement. For STM32F072C8T6 and other STM32F0-family candidates, check exact Flash density, RAM, timers, ADC or DAC availability, pin multiplexing, peripheral instances, supply limits, temperature grade, and firmware references. Verify programming, debugging, and bootloader assumptions as well before substituting a different ordering code.
زانیاری پابەندبوون
The supplied verified results do not explicitly state the target part's RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these attributes with STMicroelectronics or the authorized distributor before environmental or automotive qualification.