STM32F103ZEH7TR - 72MHz Cortex-M3 MCU 512KB | STMicroelectronics
MPN: STM32F103ZEH7TR ✓ چالاکSTM32F103ZEH7TR گشتی
A microcontroller is a programmable embedded-control IC that integrates a processor core, memory, peripherals, and communication interfaces on one semiconductor device. The STM32F103 family belongs to the Mainstream Performance line and combines an Arm Cortex-M3 core with peripherals for real-time control. The STM32F103ZEH7TR is the high-density member with the largest program-memory configuration in the identified STM32F103ZE family.
Key features include a 72 MHz Arm Cortex-M3 processor, 512 KB of Flash, a 32-bit architecture, and support for USB, CAN, 11 timers, 3 ADCs, and 13 communication interfaces. These resources support simultaneous control, sensing, data acquisition, and network communication without requiring multiple discrete interface devices. The 144-LFBGA package also provides a high pin count for projects requiring extensive I/O and peripheral connectivity.
Technically, the STM32F103ZEH7TR belongs to STMicroelectronics' high-density performance line of Arm-based 32-bit microcontrollers. Its combination of a 72 MHz Cortex-M3 core, broad peripheral set, and 512 KB Flash makes it suitable for control systems that need more code and interface density than smaller STM32F103 devices. The CAN and USB interfaces are particularly relevant to industrial gateways, motor controllers, data acquisition units, and connected embedded equipment.
Typical applications include industrial motor control, USB-connected embedded systems, CAN-based automation equipment, mixed-signal measurement systems, communication hubs, and compact control platforms. The three ADC channels support analog measurement, while the timer set supports timing, input capture, output compare, and motor-control functions when configured through the device peripherals.
Designers should confirm the exact pin assignments, peripheral multiplexing, clock configuration, and power requirements from the manufacturer pinout and reference manual before PCB release. Because the device uses a fine-pitch 144-LFBGA package, board layout, escape routing, assembly profile, and manufacturing capability are critical to successful implementation.
This product page combines the verified manufacturer family information, exact part specifications, sourcing references, constrained drop-in alternatives, and engineering guidance that helps distinguish the STM32F103ZEH7TR from other STM32F103 density, package, temperature, and flash-memory variants.
جێگرەوەکانی جێگۆڕکێ بۆ STM32F103ZEH7TR — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ STM32F103ZEH7TR (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Product Line, Product Type.
STM32F103ZEH6TR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32F103ZEH7TR زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 32-bit ARM-based microcontroller |
| Product Line | Mainstream Performance line |
| Series | STM32F103 high-density performance line |
| CPU Core | Arm Cortex-M3 |
| Maximum CPU Frequency | 72 MHz |
| Word Size | 32 bit |
| Flash Memory | 512 KB |
| Flash Organization | 512K x 8 bits |
| USB Interface | Supported |
| CAN Interface | Supported |
| Timer Count | 11 timers |
| ADC Count | 3 ADCs |
| Communication Interface Count | 13 communication interfaces |
| پاکێج | 144-LFBGA (10 x 10 mm) |
| جۆری دامەزراندن | Surface mount |
ڕێنمایی ڕێکخستنی پینی STM32F103ZEH7TR 144-lfbga (10 x 10 mm)
ڕێکخستنی پین بۆ STM32F103ZEH7TR (پاکێجی 144-lfbga (10 x 10 mm)). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ STM32F103ZEH7TR.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
STM32F103ZEH7TR گونجاوە بۆ 6 بەکارھێنانs: USB-Connected Embedded Control, CAN-Based Industrial Automation, Brushless Motor Control, Analog Measurement and Data Acquisition, Communication Gateway, Embedded Data Logger.
USB-Connected Embedded Control
The STM32F103ZEH7TR fits USB-connected control equipment because its STM32F103ZE family combines a 72 MHz Arm Cortex-M3 core with USB support, 512 KB of Flash, and 13 communication interfaces. Firmware can perform protocol handling, local control, and data acquisition while retaining enough program memory for application logic and USB classes. The 144-LFBGA 10 x 10 mm package exposes substantial I/O for sensors, indicators, and controls. Verify connector protection, bus impedance, firmware timing, and the complete package pin map in the manufacturer documentation.
پێشنیارکراو
CAN-Based Industrial Automation
The STM32F103ZEH7TR is suitable for CAN-based industrial automation because the manufacturer identifies CAN connectivity, 11 timers, 3 ADCs, and a 72 MHz Cortex-M3 core in the STM32F103ZE family. The device can coordinate machine timing, read analog process variables, and manage distributed bus traffic in one embedded controller. Its 512 KB Flash supports larger protocol and diagnostic workloads. The final equipment design still needs an appropriate CAN transceiver, termination, surge protection, grounding strategy, and validated bus-fault handling.
پێشنیارکراو
Brushless Motor Control
The STM32F103ZEH7TR supports brushless motor-control platforms through its 72 MHz Cortex-M3 core, 11 timers, 3 ADCs, and high-density I/O. Timer channels can generate complementary PWM signals, ADC channels can monitor rotor phase or current feedback, and the 512 KB Flash can hold control, position, and fault-management routines. A complete drive still requires power MOSFETs or intelligent power stages, gate drivers, current sensing, position feedback, and protection circuitry. Validate timing and pin multiplexing on the final 144-LFBGA layout.
پێشنیارکراو
Analog Measurement and Data Acquisition
The STM32F103ZEH7TR is well matched to mixed-signal acquisition equipment because the STM32F103ZE family provides 3 ADCs, 13 communication interfaces, 11 timers, and a 72 MHz processor. The ADCs can acquire sensor signals while timers establish precise sampling and trigger intervals, and USB or CAN can transfer collected data to a host or control network. With 512 KB of Flash, the controller can retain drivers, filtering, calibration, and diagnostics. Select external signal-conditioning and protection components according to the required voltage, bandwidth, and accuracy.
پێشنیارکراو
Communication Gateway
The STM32F103ZEH7TR can serve as a compact embedded communication gateway because it combines USB and CAN support, 13 communication interfaces, 512 KB of Flash, and a 72 MHz Cortex-M3 core. It can bridge local serial traffic, maintain protocol state, monitor inputs, and forward diagnostics through USB or CAN. The 144-LFBGA package provides the pin density needed for multiple external interfaces, but software task scheduling and buffer management remain important at 72 MHz. Confirm each peripheral's alternate-function mapping and electrical requirements before final routing.
پێشنیارکراو
Embedded Data Logger
The STM32F103ZEH7TR fits an embedded data logger because its 512 KB Flash stores firmware, configuration, and application data while the 3 ADCs handle analog inputs and the 13 communication interfaces support external storage or network links. The 72 MHz Cortex-M3 core can execute acquisition, timestamping, filtering, and status reporting concurrently. USB provides a practical maintenance path, while CAN supports integration with industrial equipment. Storage endurance, write-cycle management, clock accuracy, brownout behavior, and enclosure temperature must be evaluated for the deployment environment.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ STM32F103ZEH7TR — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | STM32F103ZEH6TR |
|---|---|---|
| Package | 144-LFBGA (10 x 10 mm) | 144-LFBGA (10 x 10 mm) |
| Brand | STMicroelectronics | STMicroelectronics |
| Flash Memory | 512 KB | 512 KB |
جیاکەرەوە سەرەکییەکان
- High-density STM32F103ZE resource integration (بەراورد بەSTM32F103ZEH6TR)
- 72 MHz Cortex-M3 processing with 512 KB Flash (بەراورد بەGD32F103)
- Integration of USB, CAN, timers, and ADCs (بەراورد بەLower-density STM32F103 devices)
تێبینییەکانی دیزاین
Treat the 144-LFBGA 10 x 10 mm layout as a fine-pitch assembly design and use the manufacturer package drawing for every ball assignment and exposed-pad connection. Keep high-speed and sensitive routes away from power-switching nodes and noisy external circuits. Confirm the PCB stack-up, via strategy, solder-mask definition, paste stencil, and assembly process with the selected manufacturer-qualified package information before releasing artwork.
Route USB, CAN, oscillator, reset, and debug signals according to the manufacturer reference layout, paying particular attention to continuous return paths and separation from switching-power stages. Place required decoupling and clock components close to their associated device pins, and keep sensitive analog inputs away from high-current switching nodes. Because the complete ball map is not reproduced on this page, use the official pin-description table and package drawing for final signal assignment.
Do not approve STM32F103ZEH6TR as a substitution solely because it shares the 144-LFBGA footprint and 512 KB Flash configuration. Compare the complete ordering codes, specified operating-temperature grade, pin definitions, peripheral configuration, programming procedure, and lifecycle status. Also avoid assuming that a generic GD32F103 is a drop-in part: the published cross-reference identifies a different maximum frequency of 108 MHz, and an exact 144-LFBGA ordering code has not been established.
زانیاری پابەندبوون
No explicit part-level compliance declarations were identified for STM32F103ZEH7TR. Request the current manufacturer compliance documents for the exact ordering code before using it in a regulated program.