STM32F411CEY6UTR - 100MHz Cortex-M4 512KB MCU | STMicroelectronics
MPN: STM32F411CEY6UTR ✓ چالاکSTM32F411CEY6UTR گشتی
A microcontroller is an integrated circuit containing a processor core, memory, peripherals, and interface logic on one semiconductor device. The STM32F411 belongs to the STM32F4 family of 32-bit microcontrollers, where the ARM Cortex-M4 core combines deterministic real-time execution with DSP and floating-point instructions. The STM32F411CEY6UTR is a general-purpose embedded MCU rather than a dedicated analog or power-management component, placing it within the broader semiconductor and embedded-processing hierarchy.
Its primary features include 100 MHz maximum CPU frequency, 125 DMIPS performance, 512 KB embedded Flash, 128 KB SRAM, an Arm Cortex-M4 FPU, USB OTG FS connectivity, and 11 timers. The 13 communication interfaces broaden connectivity options for serial peripherals, industrial buses, memory devices, and external controllers. These resources allow product designers to consolidate functions that otherwise require a processor and several discrete interface devices.
The STM32F411 architecture supports efficient control-loop execution, while the Cortex-M4 FPU accelerates software algorithms that benefit from single-precision floating-point arithmetic. Its combination of SRAM, Flash, timers, and serial interfaces is suitable for real-time data acquisition, control, communications, and compact human-interface systems. Exact ADC resolution, voltage ranges, timer channel counts, and peripheral operating limits should be confirmed in the manufacturer datasheet for the selected package and ordering code.
Typical uses include USB-connected accessories, wearable and portable devices, industrial sensing nodes, audio-control equipment, motor-control sub-systems, and compact consumer products. The 49-ball WLCSP footprint supports dense layouts but requires careful PCB design, fine-pitch assembly capability, and reliable power and ground distribution. The manufacturer documentation also describes an SD/SDIO/MMC/eMMC host interface supporting MultiMediaCard System Specification Version 4.2 in 1-bit, 4-bit, and 8-bit data-bus modes.
Designers should validate all 49 package balls against the manufacturer pinout before layout and must preserve the power, ground, decoupling, and exposed routing requirements defined by the datasheet and PCB design guidance. Firmware and peripheral configuration should be checked against the exact STM32F411xC or STM32F411xE variant because ordering suffixes can encode operating-temperature, package, and reel-handling options.
This product page consolidates verified manufacturer specifications, distributor availability, same-family drop-in candidates, package constraints, and practical design guidance. It also distinguishes verified production data from specifications that require confirmation, helping engineers evaluate the STM32F411CEY6UTR for new PCB designs without treating unqualified substitutions as automatic replacements.
جێگرەوەکانی جێگۆڕکێ بۆ STM32F411CEY6UTR — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ STM32F411CEY6UTR (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Mounting Type, Package, ADC, Communication Interfaces, Core Architecture.
STM32F411CEY6TR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32F411CEY3TR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32F411CEY6LTR
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32F411CEY6TR
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32F411CEY6UTR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32F411CEY6UTR زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 32-bit ARM Cortex-M4 microcontroller with FPU |
| Maximum CPU Frequency | 100 MHz |
| Core Performance | 125 DMIPS |
| Program Flash Memory | 512 KB |
| SRAM | 128 KB |
| ڤۆڵتیەی دابینکردن | 3.3 V |
| USB Interface | USB OTG full-speed |
| Timer Count | 11 timers |
| ADC Count | 1 ADC |
| Communication Interface Count | 13 communication interfaces |
| پاکێج | 49-WLCSP (3 x 3.19 mm) |
| جۆری دامەزراندن | Surface mount |
| Production Status | Product in full production |
ڕێنمایی ڕێکخستنی پینی STM32F411CEY6UTR 49-wlcsp (3 x 3.19 mm)
ڕێکخستنی پین بۆ STM32F411CEY6UTR (پاکێجی 49-wlcsp (3 x 3.19 mm)). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ STM32F411CEY6UTR.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
STM32F411CEY6UTR گونجاوە بۆ 6 بەکارھێنانs: USB-connected Compact Accessories, Industrial Sensor and Data-Acquisition Nodes, Wearable and Portable Health Devices, Audio and Interface Control, Motor-Control and Embedded Automation, Compact Consumer and IoT Products.
USB-connected Compact Accessories
STM32F411CEY6UTR fits compact USB accessories because its Arm Cortex-M4 core runs at up to 100 MHz and provides 125 DMIPS, while the integrated USB OTG full-speed interface removes the need for a separate USB controller. The 512 KB Flash can hold application firmware and USB class logic, and 128 KB SRAM supports protocol buffers and application state. In a dongle, peripheral, or compact control accessory, this combination allows USB communication and real-time control to share one device. The 49-WLCSP footprint also reduces board area, although fine-pitch assembly and careful USB signal routing remain essential.
Industrial Sensor and Data-Acquisition Nodes
STM32F411CEY6UTR is suitable for industrial sensing nodes that require deterministic control, serial connectivity, and moderate local data storage. Its Cortex-M4 processor executes at 100 MHz with 125 DMIPS performance, enabling filtering and control algorithms to run alongside communications, while 128 KB SRAM handles working buffers and 512 KB Flash stores firmware. The 13 communication interfaces and 11 timers support sensors, external memories, and actuators around a shared control core. Although the 3.3 V device is broadly useful, industrial temperature-range and compliance requirements must be checked against the exact ordering suffix before deployment.
Wearable and Portable Health Devices
STM32F411CEY6UTR fits wearable and portable health-device designs where processing capability must be balanced against board area. The 100 MHz Cortex-M4 core with FPU can execute motion, signal-processing, and user-interface control routines, while the 512 KB Flash and 128 KB SRAM support embedded firmware and short-term data buffering. Its 49-WLCSP package is particularly attractive where a 3 x 3.19 mm device can replace a larger package with discrete components. The medical or wellness classification of the finished product does not automatically qualify this MCU for every regulatory requirement, so developers should validate electrical limits, temperature grade, and applicable standards independently.
Audio and Interface Control
STM32F411CEY6UTR can serve as the control processor in compact audio and multimedia equipment. Its Cortex-M4 FPU provides efficient single-precision arithmetic for signal control, while 11 timers support periodic sampling, transport, and actuator timing. The 512 KB Flash accommodates control firmware and parameter tables, and 128 KB SRAM supports protocol and buffering workloads. Engineers can connect external audio codecs or digital interfaces while using the MCU for configuration, volume control, status reporting, and communication. The available data does not specify an integrated high-resolution audio codec or DAC, so an external audio path is required where the target product cannot supply it.
Motor-Control and Embedded Automation
STM32F411CEY6UTR supports compact motor-control and embedded-automation sub-systems where deterministic timing and communication are important. Its 11 timers provide resources for pulse-width modulation, input capture, and periodic control tasks, while 125 DMIPS performance allows supervisory logic to run alongside the control loop. The 128 KB SRAM accommodates current control state, and 512 KB Flash stores application code. Depending on the motor and power stage, the MCU can supervise gate drivers, monitor position sensors, and report faults through serial interfaces. The verified data does not include motor-control-specific ratings, so current limits and analog performance must be confirmed before direct high-current drive use.
Compact Consumer and IoT Products
STM32F411CEY6UTR offers a strong feature-to-area ratio for compact consumer products and IoT controllers. The 100 MHz Cortex-M4 core handles application logic, the 512 KB Flash supports firmware updates and connected-device features, and 13 communication interfaces provide options for sensors, displays, memory, and external radios. Its 49-WLCSP package supports dense layouts in smart-home accessories, wearables, and portable products. USB OTG FS can simplify direct host or device connectivity, although wireless operation depends on a separate radio or communication module. Power budgeting, sleep behavior, and pin multiplexing should be reviewed from the datasheet before finalizing a low-power product.
داتای سەرچاوەی ئەندازیاری بۆ STM32F411CEY6UTR — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | STM32F411CEY6TR | STM32F411CEY3TR | STM32F411CEY6LTR | STM32F411CEY6 | STM32F411CEY6UTR |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 49-WLCSP (3 x 3.19 mm) | 49-WLCSP (3 x 3.19 mm) - same | 49-WLCSP - same | 49-WLCSP - same | 49-WLCSP - same | 49-WLCSP (3 x 3.19 mm) - same |
| CPU Core | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU - exact ordering code |
| Maximum CPU Frequency | 100 MHz | 100 MHz | 100 MHz | 100 MHz | 100 MHz | 100 MHz - exact ordering code |
| Program Flash Memory | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB - exact ordering code |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB - exact ordering code |
| Core Performance | 125 DMIPS | 125 DMIPS | 125 DMIPS | 125 DMIPS | 125 DMIPS | 125 DMIPS - exact ordering code |
جیاکەرەوە سەرەکییەکان
- Matches the verified STM32F411CEY6TR replacement on core speed and memory (بەراورد بەSTM32F411CEY6TR)
- Provides 512 KB Flash rather than the 256 KB offered by the CC-series comparison part (بەراورد بەSTM32F411CCY6TR)
- Preserves the 49-WLCSP footprint instead of requiring a UFQFPN redesign (بەراورد بەSTM32F411CEU6TR)
- Combines 125 DMIPS performance with 128 KB SRAM and 13 communication interfaces (بەراورد بەSTM32F411CCY6TR)
تێبینییەکانی دیزاین
Do not begin the WLCSP land pattern from a generic 49-ball template. Use the exact package drawing and pin table in the STM32F411xC/STM32F411xE manufacturer datasheet, then cross-check ball numbering, power rails, ground balls, and reserved connections. Place decoupling capacitors adjacent to their designated supply balls and provide a continuous ground reference beneath the device where the package drawing permits it. Fine-pitch WLCSP assembly also requires confirming PCB pad geometry, solder mask, paste stencil, and component placement tolerances with the assembler.
Do not assume that every STM32F411CE suffix is electrically and commercially interchangeable. The supplied data confirms the 49-WLCSP package, 100 MHz core, and 512 KB Flash for STM32F411CEY6TR, but it does not fully expose temperature-grade or reel-handling differences for every suffix. Before substitution, compare the manufacturer ordering-information table, temperature grade, flash marking, tape orientation, and reel dimensions. In particular, STM32F411CEU6TR uses a 48-UFQFPN package and STM32F411CCY6TR has only 256 KB Flash, so neither is a drop-in match.
Validate the complete 3.3 V power path before layout, including the MCU's permitted supply range, external component requirements, and the current needed by USB and attached peripherals. Keep high-current USB return paths and switching-supply paths away from sensitive analog or communication nodes. Because the supplied excerpt does not state capacitor values, ESR requirements, or sequencing limits, use the values and layout guidance in the official manufacturer datasheet rather than generic values from another STM32 family member.
Route USB and other high-speed communication interfaces with short, continuous reference paths and avoid split planes beneath key signals. The verified MCU supports USB OTG full-speed, but the supplied data does not specify trace-impedance, via, or connector-layout requirements. Confirm those details in the manufacturer datasheet and the chosen USB transceiver or connector documentation. Keep the crystal or clock circuitry, decoupling, and high-current routing spatially separated from communication pins to reduce coupling and timing sensitivity.
زانیاری پابەندبوون
The supplied excerpts identify the part as production data but do not explicitly provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. These statuses must be confirmed from current STMicroelectronics documentation for the exact ordering code.