STM32G031G4U6 - 64MHz Cortex-M0+ MCU | STMicroelectronics
MPN: STM32G031G4U6 ✓ چالاکSTM32G031G4U6 گشتی
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into a single device. The STM32G0 family belongs to the embedded-processing hierarchy that includes 32-bit RISC cores, microcontrollers, embedded systems, and semiconductor components. Its combination of compact packaging, serial communication interfaces, analog conversion resources, and timers makes it suitable for cost-sensitive embedded control designs.
The STM32G031G4U6 provides 16 KB of Flash for program storage, 8 KB of SRAM for working data, and a maximum CPU frequency of 64 MHz. It supports two USART peripherals, an ADC, timers, and communication interfaces. Its stated operating voltage range is 1.7 V to 3.6 V, allowing operation from low-voltage 3.3 V systems when appropriate regulator headroom is maintained.
The 28-UFQFPN package occupies only 4 x 4 mm, making the device appropriate for compact control boards, sensor nodes, and embedded products where board area is limited. Its Arm Cortex-M0+ architecture supports efficient 32-bit processing while retaining a simple embedded-control design profile. Exact peripheral counts, timer resources, pin assignments, and conversion performance should be confirmed in the manufacturer pin description and electrical characteristics tables before design release.
Typical applications include low-power sensor interfaces, small industrial control modules, building accessory controllers, compact motor-control supervisory systems, and communication-equipped IoT endpoints. Two USART channels are particularly useful when a product needs concurrent serial links for a host controller, local module, diagnostics, or an external radio.
The principal design consideration is careful 1.7 V to 3.6 V power-supply planning. Decoupling must follow the manufacturer reference layout, unused inputs must be configured correctly, and firmware should validate actual clock, ADC, and communications behavior on production hardware rather than relying solely on nominal family-level specifications.
This page combines the official product positioning with package, memory, voltage, interface, and temperature information, then adds application guidance, parameter comparisons, and practical implementation notes for faster engineering evaluation.
جێگرەوەکانی جێگۆڕکێ بۆ STM32G031G4U6 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ STM32G031G4U6 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Flash Memory, Package, Product Type, Maximum CPU Frequency, Communication Interfaces.
STM32G031G8U6
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32G031G6U6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32G031G4U6 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 32-bit ARM Cortex-M0+ microcontroller |
| Maximum CPU Frequency | 64 MHz |
| Flash Memory | 16 KB |
| SRAM | 8 KB |
| Architecture | 32-bit RISC |
| Core | Arm Cortex-M0+ |
| Operating Voltage Range | 1.7 V to 3.6 V |
| USART Count | 2 |
| ADC | Present |
| Timers | Present |
| Communication Interfaces | Present |
| پاکێج | 28-pin UFQFPN, 4 x 4 mm |
| جۆری دامەزراندن | Surface mount |
| Minimum Operating Temperature | -40 °C |
| Maximum Operating Temperature | +85 °C |
ڕێنمایی ڕێکخستنی پینی STM32G031G4U6 28-pin ufqfpn, 4 x 4 mm
ڕێکخستنی پین بۆ STM32G031G4U6 (پاکێجی 28-pin ufqfpn, 4 x 4 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ STM32G031G4U6.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
STM32G031G4U6 گونجاوە بۆ 6 بەکارھێنانs: Compact Industrial Sensor Interface, Low-Power IoT Sensor Node, Small Motor Control Supervisor, Building Accessory Controller, Battery-Powered Measurement Module, Serial Communication Gateway.
Compact Industrial Sensor Interface
The STM32G031G4U6 fits compact sensor interfaces because it combines a 64 MHz Arm Cortex-M0+ core, 16 KB of Flash, and 8 KB of SRAM in a 28-pin 4 x 4 mm UFQFPN package. Its ADC can acquire analog sensor signals, while timers support periodic sampling and control tasks. The 1.7 V to 3.6 V operating range supports low-voltage embedded systems, although the complete analog front end should provide suitable signal conditioning, filtering, and protection. Firmware should also confirm that the application code, diagnostics, and communication buffers fit within 8 KB of SRAM. For a board with multiple low-speed sensors and a local serial host, the two USART channels provide useful flexibility without requiring a larger package.
پێشنیارکراو
Low-Power IoT Sensor Node
The STM32G031G4U6 is suitable for a compact IoT sensor node that periodically measures its environment and reports data through a local serial link. Its Cortex-M0+ processor operates up to 64 MHz, providing ample control headroom while supporting low-duty-cycle firmware designs. Two USARTs can separate an external communications module from a local sensor or debug channel, and the ADC supports direct analog sensing. The 28-pin 4 x 4 mm UFQFPN footprint conserves board area. Since the identified family has 16 KB of Flash and 8 KB of SRAM, firmware architecture should minimize resident buffers, avoid unnecessary library overhead, and account for radio-control and diagnostic tasks before final sensor-node design approval.
پێشنیارکراو
Small Motor Control Supervisor
The STM32G031G4U6 can serve as the supervisory controller in a small brushed-motor or actuator system where it manages commands, reads analog feedback, and monitors status. Its timers support periodic input capture, output compare, or general timing functions, while two USARTs allow connection to a motion controller and diagnostic equipment. The device should not directly drive the motor load; external transistors, a suitable motor driver, current sensing, and fault protection remain necessary. Its 64 MHz Cortex-M0+ core can execute responsive supervisory logic, but loop timing and shutdown behavior must be validated under worst-case load. The compact package helps when control space is limited, while its 1.7 V to 3.6 V supply range simplifies common 3.3 V power architectures.
پێشنیارکراو
Building Accessory Controller
The STM32G031G4U6 is appropriate for compact building accessories such as access controls, keypads, occupancy interfaces, or motorized-entry peripherals. Its two USARTs support a local host interface and an external reader or communications module, while timers can manage indicator timing, debounce, or actuator sequencing. The 28-pin UFQFPN package preserves space in enclosure-mounted electronics. Designers should budget the 16 KB of Flash for application code and the 8 KB of SRAM for protocol state and buffers, then place flash-resident diagnostics accordingly. Operation from 1.7 V to 3.6 V supports regulated low-voltage rails, provided every connected peripheral shares a compatible voltage or uses suitable level translation.
پێشنیارکراو
Battery-Powered Measurement Module
The STM32G031G4U6 works well in a compact battery-powered measurement module where a small controller must acquire data, apply local filtering, and communicate intermittently. Its Cortex-M0+ core runs up to 64 MHz, allowing digital signal processing and control functions to coexist with a 16 KB Flash and 8 KB SRAM memory budget. The ADC supports analog measurement, and the low pin count suits a restrained, low-power design. System-level battery life depends on sleep-mode behavior, sensor load, and communications activity, which must be evaluated using the manufacturer's operating-current tables. Firmware should avoid blocking delays, use event-driven sampling, and switch unused peripherals off to improve the energy profile of the complete module.
پێشنیارکراو
Serial Communication Gateway
The STM32G031G4U6 can implement a small serial gateway because it provides two USARTs, a 64 MHz Cortex-M0+ core, and communication interfaces in a compact 28-pin package. One serial channel may connect to a local sensor or host while the other links to an external communications module. Protocol conversion, buffering, and diagnostics should be designed around the available 8 KB of SRAM, while application and update logic must fit within 16 KB of Flash. The 1.7 V to 3.6 V operating range suits a regulated 3.3 V design, but level translation may be needed for legacy 5 V peripherals. Production testing should exercise simultaneous traffic, malformed frames, line noise, and recovery behavior under worst-case bus loading.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ STM32G031G4U6 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | STM32G031G8U6 | STM32G031G6U6 |
|---|---|---|---|
| Manufacturer | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 28-pin UFQFPN, 4 x 4 mm | 28-pin UFQFPN, 4 x 4 mm | 28-pin UFQFPN, 4 x 4 mm |
| CPU Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 64 MHz | 64 MHz | 64 MHz |
| Flash Memory | 16 KB | 64 KB | 32 KB |
| Operating Voltage Range | 1.7 V to 3.6 V | 1.7 V to 3.6 V | 1.7 V to 3.6 V |
| ADC | Present | Present | Present |
جیاکەرەوە سەرەکییەکان
- Lower memory capacity supports focused firmware designs (بەراورد بەSTM32G031G6U6)
- Compact 28-pin surface-mount implementation (بەراورد بەSTM32G031G8U6)
- Two USARTs support multiple serial roles (بەراورد بەSTM32G031G4U6)
تێبینییەکانی دیزاین
Use the manufacturer package drawing and reference layout for the 28-pin UFQFPN footprint. Confirm the exposed-pad dimensions, pad geometry, solder-mask pattern, and thermal-via arrangement rather than deriving them from the nominal 4 x 4 mm body size. Keep input, output, and decoupling connections short, route sensitive analog inputs away from fast-switching nodes, and provide a continuous ground reference beneath the device. Validate the assembled board against the latest PCB design guidance before release.
Plan the 1.7 V to 3.6 V supply requirement across startup, load transients, and the highest operating temperature. Place the manufacturer-recommended input and bypass capacitors directly beside their associated pins, with the shortest possible current-loop paths. Check peripheral current consumption and regulator headroom rather than assuming the 64 MHz CPU rating applies continuously. If analog measurements are required, verify whether the analog supply and digital supply can share a rail and whether additional filtering is needed.
Do not treat a higher-Flash family member as automatically interchangeable. STM32G031G8U6 and STM32G031G6U6 have more program memory than the 16 KB target, which can alter linker placement, boot assumptions, and validation coverage. Compare every pin name, alternate function, exposed-pad connection, and clock requirement with the manufacturer documentation. Production substitutions should pass firmware, brownout, serial-interface, ADC, and full-temperature testing on the existing PCB.
Assign the two USART channels according to their electrical roles and keep external serial routes away from the ADC and oscillator-related circuitry. If one interface connects to a long cable or noisy peripheral, add the appropriate protection network at the connector rather than relying on internal microcontroller clamping alone. Keep the analog ground reference continuous, provide a local low-impedance return for sensor currents, and use controlled return paths to minimize ground offsets during ADC conversion.
زانیاری پابەندبوون
The available product information identifies the -40 °C to +85 °C operating-temperature range but does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Obtain current manufacturer declarations before using a specific compliance claim.