STM32G041G8U6 - 64MHz Cortex-M0+ MCU | STMicroelectronics
MPN: STM32G041G8U6 ✓ چالاکSTM32G041G8U6 گشتی
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripheral interfaces, and power-management circuitry on one package. In the product hierarchy, the STM32G041G8U6 is an MCU, an embedded controller, and a member of the STM32G0 family of 32-bit Arm Cortex-M0+ devices. This integration reduces the component count required for small control systems while supporting digital communication, timing, analog input, and general-purpose I/O.
The device combines a 64 MHz Arm Cortex-M0+ processor with 64 KB of Flash and 8 KB of SRAM. Its operating voltage range is 1.7 V to 3.6 V, supporting low-voltage embedded systems. The compact 28-pin UFQFPN package is suitable for space-constrained products, while the manufacturer’s STM32 ecosystem provides a consistent development path for firmware, peripherals, and board-level evaluation.
The STM32G0 architecture emphasizes efficient processing in an entry-level 32-bit MCU platform. Flash memory provides nonvolatile program storage, while the 8 KB SRAM provides working memory for stack operations, variables, and interrupt servicing. The 64 MHz clock rate gives designers more scheduling headroom than slower general-purpose 8-bit controllers without moving to a more complex high-performance MCU class.
Typical uses include low-power sensor nodes, compact motor and relay controllers, building automation endpoints, household appliances, instrumentation, and small industrial control boards. The small footprint is particularly useful when the design must fit into a compact sensor enclosure or densely populated control PCB while retaining a 32-bit software ecosystem.
Designers should use the manufacturer’s pin and package documentation to assign all 28 pins, preserve the exposed-pad land pattern, and select decoupling capacitors for the device-specific power requirements. Firmware migration and PCB reuse should be evaluated against the complete electrical, pinout, peripheral, and lifecycle documentation rather than processor frequency alone.
This product page combines the manufacturer specifications, package information, sourcing guidance, and engineering-focused design considerations into a concise selection reference for teams evaluating the STM32G041G8U6 for compact embedded systems.
جێگرەوەکانی جێگۆڕکێ بۆ STM32G041G8U6 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ STM32G041G8U6 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package.
STM32G051G8U6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32G061G8U6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32G071G8U6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32G081G8U6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32G091G8U6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32G041G8U6 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 32-bit ARM Cortex-M0+ Microcontroller |
| Manufacturer | STMicroelectronics |
| Maximum CPU Frequency | 64 MHz |
| CPU Architecture | Arm Cortex-M0+ |
| Instruction Width | 32-bit |
| Flash Memory | 64 KB (64K x 8) |
| SRAM | 8 KB |
| Operating Voltage Range | 1.7 V to 3.6 V |
| پاکێج | 28-pin UFQFPN (4 x 4 mm) |
| جۆری دامەزراندن | Surface Mount |
| Product Family | STM32G0 |
| Series | STM32G041x6/x8 |
| Packaging | Tray |
ڕێنمایی ڕێکخستنی پینی STM32G041G8U6 28-pin ufqfpn (4 x 4 mm)
ڕێکخستنی پین بۆ STM32G041G8U6 (پاکێجی 28-pin ufqfpn (4 x 4 mm)). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ STM32G041G8U6.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
STM32G041G8U6 گونجاوە بۆ 6 بەکارھێنانs: Low-Power Sensor Nodes, Compact Motor and Relay Control, Building Automation Endpoints, Household Appliance Controls, Portable Measurement Instruments, Communication Gateway Modules.
Low-Power Sensor Nodes
The STM32G041G8U6 fits compact sensor nodes that sample physical inputs, filter data, and communicate results over a serial link. Its 64 MHz Arm Cortex-M0+ core provides useful task scheduling capacity, while 64 KB of Flash stores application firmware and 8 KB of SRAM supports buffers, variables, and protocol state. The 1.7 V to 3.6 V operating range can simplify integration with low-energy sensor rails. In a battery-powered design, operate the MCU within its specified low-power modes, minimize unused peripherals, and confirm the regulator’s startup and shutdown behavior against the manufacturer electrical characteristics.
پێشنیارکراو
Compact Motor and Relay Control
The STM32G041G8U6 is suitable for compact motor, solenoid, and relay controllers where deterministic control logic must coexist with limited board area. The 64 MHz Cortex-M0+ core can execute timing routines, debounce inputs, and update outputs, while the 64 KB Flash and 8 KB SRAM provide room for moderate control firmware. Place the MCU close to the power-control circuitry and isolate noisy switching paths from sensitive signal traces. Because the exact GPIO, timer, and PWM resources must be confirmed for the selected package, use the manufacturer pin and peripheral tables before assigning actuator outputs.
پێشنیارکراو
Building Automation Endpoints
STM32G041G8U6 can serve as the controller in compact building-automation endpoints such as room controllers, occupancy modules, HVAC interfaces, and simple actuator nodes. Its 28-pin UFQFPN package reduces PCB area, while the 64 MHz Cortex-M0+ core and 64 KB of Flash support protocol handling, local logic, and diagnostics. The 1.7 V to 3.6 V range accommodates low-voltage distribution designs. Engineer the system for deterministic debounce, watchdog recovery, and communication fault handling, and confirm that every required peripheral is available on the exact 28-pin configuration.
پێشنیارکراو
Household Appliance Controls
The STM32G041G8U6 is well suited to compact household appliance controllers that coordinate buttons, displays, sensors, relays, and motors. Its 64 MHz processing rate supports responsive state-machine control, and 64 KB of Flash plus 8 KB of SRAM is appropriate for many compact appliances without an external memory device. The small 4 x 4 mm UFQFPN package helps minimize board area in tightly packaged products. Use the exact manufacturer footprint and pin-description tables, provide local decoupling as specified, and include watchdog and brownout recovery in the firmware for reliable operation across power transients.
پێشنیارکراو
Portable Measurement Instruments
STM32G041G8U6 can serve as the control processor in portable measurement instruments that acquire sensor data, apply calibration, and present results through a display or serial interface. The 64 MHz Cortex-M0+ core provides sufficient arithmetic capacity for measurement sequencing and data formatting, while 64 KB Flash and 8 KB SRAM support embedded firmware and acquisition buffers. Its 1.7 V to 3.6 V operating range supports compact battery-powered architectures. Separate sensitive analog paths from digital switching activity, use a quiet reference and regulated supply where required, and verify ADC performance and package pin availability in the manufacturer documentation.
پێشنیارکراو
Communication Gateway Modules
The STM32G041G8U6 can support small protocol-conversion or communication gateway modules by running serial framing, local configuration, diagnostics, and data forwarding on one microcontroller. Its 64 MHz Cortex-M0+ core has ample scheduling capacity for moderate protocol workloads, and the 28-pin UFQFPN package is useful for compact plug-in or board-to-board designs. The device operates from 1.7 V to 3.6 V, allowing integration with modern low-voltage interface rails. Validate UART, USB, CAN, or other interface availability for the exact package, isolate externally connected lines appropriately, and include a bootloader or recovery path for field maintenance.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ STM32G041G8U6 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | STM32G051G8U6 | STM32G061G8U6 | STM32G071G8U6 | STM32G081G8U6 | STM32G091G8U6 |
|---|---|---|---|---|---|---|
| Package | 28-pin UFQFPN (4 x 4 mm) | 28-pin UFQFPN (4 x 4 mm) | 28-pin UFQFPN (4 x 4 mm) | 28-pin UFQFPN (4 x 4 mm) | 28-pin UFQFPN (4 x 4 mm) | 28-pin UFQFPN (4 x 4 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| CPU Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 64 MHz | 64 MHz | 64 MHz | 64 MHz | 64 MHz | 64 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB |
| SRAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| Operating Voltage Range | 1.7 V to 3.6 V | 1.7 V to 3.6 V | 1.7 V to 3.6 V | 1.7 V to 3.6 V | 1.7 V to 3.6 V | 1.7 V to 3.6 V |
| Special Features | STM32G041 series | Expanded STM32G0 family resources | Expanded STM32G0 family resources | Expanded connectivity and control resources | Expanded STM32G0 family resources | Expanded STM32G0 family resources |
جیاکەرەوە سەرەکییەکان
- Matches the core throughput of the principal STM32G0 migration candidates (بەراورد بەSTM32G051G8U6)
- Compact 4 x 4 mm package supports space-constrained embedded designs (بەراورد بەSTM32G061G8U6)
- Operates across the same low-voltage range as the main family alternatives (بەراورد بەSTM32G071G8U6)
- Provides the stated memory configuration without increasing clock speed (بەراورد بەSTM32G081G8U6)
تێبینییەکانی دیزاین
Use the STMicroelectronics recommended land pattern for the 28-pin UFQFPN rather than adapting a generic 4 x 4 mm footprint by inspection. The dense perimeter pads and exposed thermal pad require compatible solder-mask and paste definitions. Check the package drawing for pad dimensions, exposed-pad shape, and courtyard clearance, then validate the assembly process with the board fabricator before releasing the PCB.
Decouple the MCU supply pins using the capacitance and placement specified in the manufacturer hardware guidelines, and route the connections directly to the appropriate power and ground pins. The supported operating range is 1.7 V to 3.6 V, so confirm that regulator tolerance, startup ramps, and transient excursions remain inside the device limits under every load condition.
Do not treat a shared 28-pin package as proof of automatic drop-in compatibility. Verify every alternate signal, alternate-function mapping, peripheral instance, interrupt vector, clock requirement, and exposed-pad connection in the manufacturer documentation. Review the migration guide as well as both datasheets because register, peripheral, or firmware differences may affect an otherwise identical footprint.
Keep sensitive analog and communication paths away from switching nodes and high-current return paths. Provide a direct ground reference beneath the device where the recommended footprint permits, use short supply connections, and route external communication interfaces away from the MCU clock and debug circuitry. This separation reduces susceptibility to switching noise and improves repeatability in compact sensor or control products.
زانیاری پابەندبوون
The manufacturer product information does not state the requested compliance classifications. Verify RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status for the exact orderable MPN and current regional requirements before production release.