STM32G041J6M6 - 64MHz 32-bit MCU | STMicroelectronics
MPN: STM32G041J6M6 ✓ چالاکSTM32G041J6M6 گشتی
A microcontroller is an integrated semiconductor that combines a processor core, memory, and peripherals on one device. The STM32G0 family belongs to the Arm Cortex-M0+ microcontroller hierarchy and is designed for cost-sensitive embedded control. Typical system functions include reading sensors, controlling actuators, managing communications, and executing real-time control logic while using very little board area.
The principal benefits of the STM32G041J6M6 include its 64 MHz processing rate, 32 KB of embedded Flash for firmware, and 8 KB of SRAM for working memory. Two USART peripherals support serial communication, while the listed ADC and timer resources cover analog measurement and periodic event generation. AES-256 acceleration adds hardware support for protecting data without placing encryption routines on the general-purpose processor.
The Cortex-M0+ architecture uses a 32-bit RISC design with a compact instruction set suited to embedded applications. With fewer external components than a discrete processor design, the device can simplify both board layout and firmware development. Its operating range of 1.7 V to 3.6 V supports common low-voltage embedded systems, although each external peripheral and interface must also satisfy the device's complete electrical limits.
The STM32G041J6M6 is suitable for compact sensor nodes, industrial control modules, communication equipment, and low-power monitoring products. Two USARTs allow connection to local sensors or transceivers, the ADC supports analog inputs, and the timer block can provide timing functions for control loops. The 8-pin package is especially useful where PCB area and component count are tightly constrained.
Designers should verify every pin function in the STM32G041J6 package pinout before assigning analog inputs, debug functions, or communication signals. On packages without a VREF+ pin, the STMicroelectronics datasheet states that VREF+ is internally connected to VDD and the internal voltage-reference buffer must remain disabled. Decoupling, programming access, clock configuration, and unused-pin treatment should follow the manufacturer's recommended layouts.
This product page consolidates the core electrical specifications, package information, interface resources, drop-in alternatives, application guidance, and practical design considerations into one engineering reference. It is intended to help engineers evaluate the STM32G041J6M6 for compact embedded-control designs before completing footprint, firmware, and qualification checks.
جێگرەوەکانی جێگۆڕکێ بۆ STM32G041J6M6 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ STM32G041J6M6 (هەمان شێوە و پێکهاتەی شوێن).
STM32G031J6M6
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32G051J6M6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32G071J6M6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32G011J6M6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32G041J6M6TR
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32G041J6M6 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 32-bit ARM Cortex-M0+ microcontroller |
| Maximum CPU Frequency | 64 MHz |
| Flash Memory | 32 KB |
| SRAM | 8 KB |
| Supply Voltage Range | 1.7 V to 3.6 V |
| USART Count | 2 |
| Processor Architecture | Arm Cortex-M0+, 32-bit RISC |
| ADC | 1 ADC |
| Cryptographic Accelerator | AES-256 |
| Timer Resources | General-purpose timers |
| Communication Interfaces | USART and communication interfaces |
| پاکێج | 8-pin SOIC |
| Package Code | 8-SO |
| جۆری دامەزراندن | Surface mount |
| Shipping Package | Tube |
| Reference Connection | VREF+ internally connected to VDD on packages without a VREF+ pin |
| Reference Buffer | Must be kept disabled when VREF+ is internally connected to VDD |
ڕێنمایی ڕێکخستنی پینی STM32G041J6M6 tube
ڕێکخستنی پین بۆ STM32G041J6M6 (پاکێجی tube). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ STM32G041J6M6.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
STM32G041J6M6 گونجاوە بۆ 6 بەکارھێنانs: Compact Sensor and Monitoring Node, Industrial Control Module, Local Communication Gateway, Low-Voltage Embedded Controller, Secure Connected Device, Consumer Automation Accessory.
Compact Sensor and Monitoring Node
The STM32G041J6M6 fits compact monitoring nodes that acquire analog measurements and transmit results over a local serial link. Its 64 MHz Arm Cortex-M0+ core provides sufficient control bandwidth for sensor conditioning, filtering, and local decision logic, while the ADC handles the measurement input and the two USARTs support configuration or telemetry channels. The 1.7 V to 3.6 V operating range accommodates low-voltage system rails. Its 8-pin SOIC footprint also reduces board area compared with larger MCU packages. Designers should allocate pins according to the package-specific datasheet and verify the ADC reference arrangement, particularly because packages without VREF+ connect it internally to VDD.
پێشنیارکراو
Industrial Control Module
The STM32G041J6M6 supports small industrial control modules where deterministic timing, serial connectivity, and a compact footprint matter. The 64 MHz Cortex-M0+ processor can execute control logic, timers can organize periodic tasks, and the two USARTs can connect to local controllers or service interfaces. A 1.7 V to 3.6 V supply range makes the device applicable to embedded industrial subsystems where regulated rails are already present. The 32 KB Flash capacity is suitable for focused control firmware, although applications requiring extensive logs or complex algorithms should assess a higher-memory family member. Industrial qualification should be checked separately because no AEC-Q100 status is stated for this exact MPN.
پێشنیارکراو
Local Communication Gateway
The STM32G041J6M6 can serve as the controller for a small protocol-conversion or configuration gateway. Its two USART interfaces permit simultaneous connection between a host and a local peripheral, while timers and communication resources support framing, timing, and data handling. The 64 MHz processor core allows protocol work to run without an external host processor, and the 8-pin SOIC package supports compact gateway boards. The AES-256 accelerator is useful when the design includes authenticated or encrypted device traffic. Engineers should confirm the exact peripheral mapping and whether both USARTs are simultaneously accessible on the selected 8-pin package before finalizing the board layout.
پێشنیارکراو
Low-Voltage Embedded Controller
The STM32G041J6M6 is appropriate for low-voltage embedded controllers that need more computation than an 8-bit device without adding a large processor package. Its Cortex-M0+ core operates at up to 64 MHz and provides 32-bit arithmetic, while 8 KB of SRAM supports real-time state and protocol buffers. The device operates from 1.7 V to 3.6 V, allowing it to share a common low-voltage rail in small control products. Firmware can combine GPIO, timers, ADC, and USART functions in a single device. For designs with deep-sleep requirements, evaluate the device-specific low-power modes, wake-up sources, and run-time current from the manufacturer datasheet before committing to the part.
پێشنیارکراو
Secure Connected Device
The STM32G041J6M6 suits small connected devices that must perform basic cryptographic processing alongside control and communications. Its AES-256 accelerator can offload supported encryption operations from the 64 MHz Cortex-M0+ core, reducing processor workload compared with software-only cryptographic routines. Two USARTs can support local configuration and data exchange, while the ADC and timers support the product-specific sensing and control functions. The 8-pin SOIC package limits board area and component count. Security-focused designs must still define key provisioning, update procedures, authentication behavior, and peripheral isolation; the presence of an AES accelerator alone does not establish the security level of the finished product.
پێشنیارکراو
Consumer Automation Accessory
The STM32G041J6M6 can control compact household automation accessories that combine local inputs, analog sensing, and serial communication. Its small 8-pin SOIC package helps limit enclosure size, while the 32 KB Flash capacity accommodates focused control firmware and 8 KB of SRAM supports application state. The two USARTs can connect an accessory to a controller or service interface, and the ADC can read sensors or potentiometers. Operation from 1.7 V to 3.6 V provides flexibility across common low-voltage power architectures. For mains-adjacent or safety-critical equipment, maintain appropriate isolation and protective circuitry; the MCU itself is not a substitute for regulatory protection or functional-safety measures.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ STM32G041J6M6 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | STM32G031J6M6 | STM32G051J6M6 | STM32G071J6M6 | STM32G011J6M6 | STM32G041J6M6TR |
|---|---|---|---|---|---|---|
| Package | SOIC-8 | SOIC-8 - same | SOIC-8 - same | SOIC-8 - same | SOIC-8 - same | SOIC-8 - same |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Processor Core | Arm Cortex-M0+, 32-bit | Arm Cortex-M0+, 32-bit | Arm Cortex-M0+, 32-bit | Arm Cortex-M0+, 32-bit | Arm Cortex-M0+, 32-bit | Arm Cortex-M0+, 32-bit |
| Maximum CPU Frequency | 64 MHz | 64 MHz | 64 MHz | 64 MHz | 64 MHz | 64 MHz |
| Flash Memory | 32 KB | 32 KB | 64 KB | 128 KB | 8 KB | 32 KB |
| SRAM | 8 KB | 8 KB | 8 KB | 16 KB | 2 KB | 8 KB |
| Supply Voltage Range | 1.7 V to 3.6 V | 1.7 V to 3.6 V | 1.7 V to 3.6 V | 1.7 V to 3.6 V | 1.7 V to 3.6 V | 1.7 V to 3.6 V |
| USART Count | 2 | 2 | 2 | 2 | 2 | 2 |
| Delivery Format | Tube | Tube | Tube | Tube | Tube | Tape and reel |
جیاکەرەوە سەرەکییەکان
- Balances 64 MHz processing with a compact 8-pin package (بەراورد بەSTM32G011J6M6)
- Includes AES-256 hardware acceleration (بەراورد بەSTM32G031J6M6)
- Uses less Flash than the larger-memory STM32G0 options (بەراورد بەSTM32G071J6M6)
- Maintains 32 KB Flash and 8 KB SRAM across the nearest same-family alternatives (بەراورد بەSTM32G051J6M6)
تێبینییەکانی دیزاین
Use the STM32G041J6 package drawing and pin table as the authoritative footprint references. Place the required supply-decoupling capacitors close to the VDD and VDDA pins, connect the ground pins to a low-impedance plane, and provide programming access to the reset and boot-related pins. Because the package has only eight pins, confirm that both USART functions, the ADC input, and all required control signals can be assigned simultaneously before freezing the board layout.
Design the 1.7 V to 3.6 V supply so it remains within the STM32G041J6M6 operating range across tolerance, startup, and transient conditions. Add local bulk and high-frequency decoupling following the manufacturer layout guidance. On packages without a VREF+ pin, VREF+ is internally connected with VDD and the internal voltage-reference buffer must remain disabled. The MCU must not be assumed to provide an independently adjustable analog reference on this package.
Do not treat a different STM32G0 suffix as automatically interchangeable. The final suffix controls factors such as temperature grade and delivery format, while the base-device code can change Flash, SRAM, peripheral availability, and pin multiplexing. Before replacing STM32G041J6M6 with another member, compare the exact ordering code, package drawing, pin table, clock settings, peripheral resources, memory requirements, and operating-temperature limits, then rerun firmware and hardware validation.
Keep the 64 MHz communication and clock-related traces short, provide a continuous ground reference, and place sensitive analog inputs away from switching nodes. The ADC should use a low-impedance source and an appropriate return path; long traces and series resistance can degrade measurement accuracy. Follow the manufacturer test-point and programming-access recommendations so debug and production programming remain practical within the small SOIC-8 footprint.
زانیاری پابەندبوون
Compliance status is unknown because no exact-MPN declaration was included. The STMicroelectronics product page and datasheet URL are provided for current environmental, ordering, and qualification documentation.