STMicroelectronics

STM32G0B0RET6 - 64MHz Cortex-M0+ MCU | STMicroelectronics

MPN: STM32G0B0RET6 ✓ چالاک
2.5 V / 3.3 V Vdss 64-LQFP Package 64 MHz Speed 512 KB Memory
MOQ: 1 |

STM32G0B0RET6 گشتی

The STMicroelectronics STM32G0B0RET6 is a 32-bit Arm Cortex-M0+ microcontroller operating at up to 64 MHz, with 512 KB of flash memory and a 64-pin LQFP package measuring 10 mm by 10 mm. The device is designed for cost-sensitive embedded applications requiring mainstream performance, substantial program storage, and a broad selection of peripheral interfaces.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one compact device. The STM32G0 belongs to the STM32G0 mainstream value-line family, positioning it between simple 8-bit controllers and more specialized high-performance embedded processors. Its Arm Cortex-M0+ architecture supports efficient control workloads while retaining broad ecosystem support for development tools, firmware libraries, and embedded communication peripherals.

Key characteristics include a maximum operating frequency of 64 MHz, 512 KB of flash, and up to 144 KB of RAM. The controller is identified with the 64-LQFP surface-mount package, giving the design 64 externally accessible pins compared with smaller leaded or compact packages. Its 10 mm by 10 mm body size balances routing flexibility and thermal performance with the higher assembly cost and footprint of a large leaded package.

The STM32G0B0RET6 combines a general-purpose RISC core with embedded-control peripherals suited to sensor acquisition, digital interfaces, timing, communications, and system supervision. Its 512 KB flash capacity provides room for application code, configuration data, and firmware updates, while the available RAM supports more demanding buffering than entry-level microcontrollers. Exact peripheral assignments, voltage limits, and electrical characteristics should be confirmed against the manufacturer pinout and datasheet for the selected board revision.

Typical uses include industrial control modules, building automation equipment, appliance controllers, compact motor-control systems, communications hubs, and low-cost IoT gateways. The larger 64-pin package is especially useful when a design requires more exposed GPIO than smaller STM32G0 variants provide. It also offers sufficient peripheral connectivity for designs combining digital control with external sensors, displays, communication transceivers, or power-conversion stages.

PCB planning should begin with the exact 64-pin pad geometry and alternate-function assignments. Confirm every power, ground, reset, clock, programming, and communication connection before layout because peripheral mapping is pin-specific. Provide stable decoupling near the supply pins, route sensitive clock and communication paths away from fast-switching nodes, and confirm the recommended external-component configuration in the manufacturer documentation.

This page combines the core manufacturer and distributor characteristics with pinout, application, selection, and engineering guidance. It is intended to help designers confirm package fit, memory capacity, processing headroom, and interface suitability before committing the STM32G0B0RET6 to a new embedded-control design.

جێگرەوەکانی جێگۆڕکێ بۆ STM32G0B0RET6 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ STM32G0B0RET6 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Product Type, RAM.

STMicroelectronics
Package: 64-pin LQFP, 10 x 10 mm
Product Type: 32-bit RISC microcontroller
RAM: 144 KB
بەراوردکردن لەگەڵ STM32G0B0RET6 →

STM32G0B1RET6

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
STMicroelectronics
📦 64-LQFP
32-bit RISC microcontroller · Arm Cortex-M0+ · 64 MHz · Arm 32-bit RISC · 512 KB · 512K x 8 bits · 144 KB · 2 banks

✓ بەردەستە

$6.2344 / یەکە

بینینی داتاشیت →

STM32G0B0RE

✅ جێگرەوەی ڕاستەوخۆ
📦 64-LQFP
Base ordering code in the same STM32G0B0RE family and 64-LQFP package; suffix-specific temperature and packing options must be matched before substitution

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

STM32G0B1RET6

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
STMicroelectronics
📦 64-LQFP
32-bit RISC microcontroller · Arm Cortex-M0+ · 64 MHz · Arm 32-bit RISC · 512 KB · 512K x 8 bits · 144 KB · 2 banks

✓ بەردەستە

$6.2344 / یەکە

بینینی داتاشیت →

STM32G0B0RET6 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type 32-bit microcontroller
Processor Core Arm Cortex-M0+
زۆرترین فرێکوێنسیی کاتژمێر 64 MHz
Instruction Set Width 32-bit
Flash Memory 512 KB
RAM Up to 144 KB
Series STM32G0 mainstream value line
پاکێج 64-LQFP
Package Body Size 10 mm x 10 mm
ژمارەی پین 64 pins
جۆری دامەزراندن Surface mount
Operating Voltage 2.5 V / 3.3 V

ڕێنمایی ڕێکخستنی پینی STM32G0B0RET6 10 mm x 10 mm

ڕێکخستنی پین بۆ STM32G0B0RET6 (پاکێجی 10 mm x 10 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 10 mm x 10 mm بۆ STM32G0B0RET6

هیچ داتای وردی پینئاوت بەردەست نییە بۆ STM32G0B0RET6.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

STM32G0B0RET6 گونجاوە بۆ 6 بەکارھێنانs: Industrial Control Module, Building Automation Controller, Appliance Control Board, Sensor Hub and Data Logger, Communications Gateway, Compact Motor and Power Control.

🏭

Industrial Control Module

The STM32G0B0RET6 fits industrial control modules that require a 64 MHz Arm Cortex-M0+ core, 512 KB of flash, and up to 144 KB of RAM. Its 64-LQFP interface provides a broad selection of GPIO for digital inputs, discrete outputs, status indicators, and external control functions. In a compact controller, the MCU can execute state-machine logic while coordinating sensors and actuators through its on-chip peripherals. The 10 mm by 10 mm package is larger than a small QFN option but simplifies routing in systems that need numerous external connections. Firmware should use the exact alternate-function map from the manufacturer pinout, and the power design should account for the indicated 2.5 V and 3.3 V operating conditions.

🏠

Building Automation Controller

The STM32G0B0RET6 suits building-automation controllers that coordinate lighting, climate, access, and occupancy-related functions. The 512 KB of flash supports a sizeable embedded application and local configuration storage, while up to 144 KB of RAM provides headroom for protocol buffers and state management. Its 64-pin package makes it practical to connect several serial peripherals, sensors, relay drivers, and status outputs on one board. The 64 MHz Cortex-M0+ core can handle scheduled control tasks and communication handling without requiring a higher-complexity processor. During hardware design, allocate pins according to the manufacturer alternate-function table, isolate switching-node wiring from communication traces, and verify reset and supply behavior across the complete 2.5 V and 3.3 V operating plan.

🔧

Appliance Control Board

The STM32G0B0RET6 is appropriate for appliance control boards combining local user interfaces, motors, heaters, sensors, and safety monitoring. Its 512 KB of flash can hold application firmware and parameter tables, while the available RAM supports control-state and communication buffers. The 64-LQFP package offers enough external pins for display and keypad signaling, sensor inputs, actuator outputs, and communications without forcing a multilayer routing compromise around a very small leadless package. The device operates at up to 64 MHz, providing responsiveness for real-time tasks such as debouncing, timing, and closed-loop monitoring. Designers should reserve programming access, define power-up states, add bulk and high-frequency decoupling, and validate every protection function under worst-case supply and load conditions.

🧩

Sensor Hub and Data Logger

The STM32G0B0RET6 can serve as a sensor-hub and local data-logging controller when a design needs 512 KB of program storage and up to 144 KB of RAM. The Arm Cortex-M0+ core can format sensor data, manage timestamps, filter readings, and transfer records through serial interfaces. Its 64-pin package provides enough connections for multiple sensors, external memory, status LEDs, and a communications transceiver. The larger LQFP footprint is advantageous where assembly teams favor visible leads and straightforward inspection, although it requires more board area than a compact QFN package. Firmware should include calibration storage, sample-rate management, and fault recovery, while the PCB layout should keep sensor references and communication lines away from switching power nodes.

🌐

Communications Gateway

The STM32G0B0RET6 fits a compact communications gateway where protocol handling, configuration storage, status monitoring, and several external interfaces must coexist. Its 64 MHz Cortex-M0+ core is suitable for real-time packet processing, and 512 KB of flash allows substantial protocol stacks and configuration logic to be installed. Up to 144 KB of RAM supports buffered transfers and state management. The 64-LQFP package gives the layout access to numerous UART, SPI, I2C, GPIO, and control pins, depending on the alternate-function assignments selected. For gateway designs, maintain short return paths for interface grounds, isolate clocks from high-current switching stages, and verify that every peripheral used by the firmware remains available on the selected 64-pin package.

⚡

Compact Motor and Power Control

The STM32G0B0RET6 can supervise compact motor, valve, or power-conversion subsystems when the controller needs extensive pin access and embedded program storage. The 64 MHz Arm Cortex-M0+ core supports timing, commutation logic, fault handling, and supervisory communication, while the 512 KB flash provides room for control algorithms and parameter tables. Its 64-pin LQFP package allows connection of position inputs, gate-driver control signals, current sensing, and external communications. The package does not replace a dedicated power stage, so designers must account for switching losses, current limits, isolation, and thermal performance outside the MCU. Place the control ground carefully, use separate quiet and power-related return paths, and test protection behavior with realistic load transients.

What are the key specifications of STM32G0B0RET6 that engineers should know?
The STM32G0B0RET6 is a 32-bit Arm Cortex-M0+ microcontroller rated for operation up to 64 MHz, with 512 KB of flash memory and up to 144 KB of RAM. It is packaged in a 64-pin LQFP measuring 10 mm by 10 mm. The STMicroelectronics product page and distributor listings identify the STM32G0B0RET6 as a mainstream STM32G0 controller suited to embedded systems requiring more memory and GPIO than compact entry-level variants.
What is the STM32G0B0RET6 used for?
The STM32G0B0RET6 is used for embedded control systems that benefit from a 64 MHz Arm Cortex-M0+ core, 512 KB of flash, and up to 144 KB of RAM. Typical equipment includes industrial controllers, appliance electronics, building-automation nodes, compact communications equipment, and sensor-hub designs. Its 64-LQFP package provides a comparatively large pin count for connecting sensors, communications transceivers, displays, and discrete control signals.
What is the operating voltage of STM32G0B0RET6?
The STM32G0B0RET6 is identified for 2.5 V and 3.3 V operation in its product listing. Before designing the power tree, consult the STM32G0B0RE manufacturer documentation for the exact supply-voltage limits associated with each operating range, peripheral configuration, and power mode. The listed 2.5 V and 3.3 V values should therefore be treated as supported system rails rather than a substitute for the complete electrical-limit table.
Where can I download the STM32G0B0RET6 datasheet PDF?
The STM32G0B0RET6 datasheet and product resources are available through the official STMicroelectronics STM32G0B0RE product page at https://www.st.com/en/microcontrollers-microprocessors/stm32g0b0re.html. The STM32G0 series documentation portal at https://www.st.com/en/microcontrollers-microprocessors/stm32g0-series/documentation.html provides the associated family documentation. Use those documents for the final pin assignments, electrical limits, clock configuration, and package drawing.
Where can I find the STM32G0B0RET6 pinout?
The STM32G0B0RET6 pinout is found in the pin-description table and package drawing within the STM32G0B0RE manufacturer documentation. The device uses a 64-LQFP package, so the drawing identifies all 64 physical pins and their alternate functions. Use the pin table to assign power, ground, reset, clocks, serial interfaces, and GPIO because several pins can support multiple functions depending on the peripheral configuration.
Is the STM32G0B0RET6 pin-compatible with an STM32G0B1RET6?
The STM32G0B1RET6 is the closest same-package family option for a new design because it uses the 64-LQFP configuration and retains the STM32G0B0RE peripheral layout. It is not automatically interchangeable in every finished product: firmware, clock settings, peripheral revisions, and electrical conditions must be checked before substitution. For an existing PCB, compare every power pin, alternate function, boot configuration, and exposed connection against the manufacturer pin tables.
When should I choose STM32G0B0RET6 over STM32G0B1RET6?
Choose the STM32G0B0RET6 when the design needs the established STM32G0B0RE feature set, 512 KB of flash, and the 64-pin package without requiring the additional capabilities of the later STM32G0B1 family member. Choose the STM32G0B1RET6 when its expanded resources or newer device revision provide a functional benefit. Because package compatibility does not guarantee firmware compatibility, update and test the application before changing device families.
What is the best drop-in replacement for STM32G0B0RET6?
The STM32G0B1RET6 is the most practical same-package candidate to evaluate for STM32G0B0RET6, provided the replacement retains the 64-LQFP footprint and satisfies the electrical and firmware requirements. A truly drop-in decision requires more than matching the package: check pin multiplexing, startup behavior, memory size, clock limits, supply current, and peripheral changes. Validate the substituted firmware on the intended hardware before production release.
Can STM32G0B1RET6 replace STM32G0B0RET6 on an existing PCB?
STM32G0B1RET6 can be considered for an existing STM32G0B0RET6 PCB because both use the 64-LQFP package configuration, but installation alone does not guarantee compatibility. The engineer must verify that all used pins retain equivalent functions and that supply, reset, clock, boot, and peripheral behavior remain acceptable. Run a complete firmware regression test after substitution, especially for communications, timers, and low-power transitions.
What can replace STM32G0B0RET6?
STM32G0B1RET6 is the leading same-brand replacement to evaluate for a 64-LQFP STM32G0B0RE-based design, while other STM32G0 variants must be screened by exact pin count and peripheral assignment. No cross-brand MCU should be treated as a drop-in replacement without a verified 64-pin footprint comparison and porting plan. Firmware compatibility, electrical limits, peripheral behavior, and qualification requirements are separate acceptance criteria from physical pin compatibility.
Is STM32G0B0RET6 the same as STM32F050C4T6A?
No. The STM32G0B0RET6 and STM32F050C4T6A are different Arm Cortex-M0+ devices with different pin counts, package sizes, memory configurations, and peripheral resources. The STM32G0B0RET6 has 64 pins, 512 KB of flash, and a 64-LQFP package. It requires a footprint and firmware review rather than being treated as a direct drop-in substitute for the smaller STM32F050C4T6A.
What is the best STMicroelectronics equivalent for STM32G0B0RET6?
STM32G0B1RET6 is the leading STMicroelectronics-family equivalent to evaluate when the 64-LQFP footprint and STM32G0 peripheral architecture must be retained. It should be treated as a controlled redesign candidate rather than an automatic substitution. Confirm pin multiplexing, electrical characteristics, clock configuration, peripheral behavior, and firmware support before approving it for production.
Where to buy STM32G0B0RET6 online?
Use the Request a Quote form on this page to request STM32G0B0RET6 price, stock, lead time, and order confirmation for the exact 64-LQFP ordering code. Quote requests should identify the required quantity, tray or reel preference, target delivery date, and shipment location. This approach avoids relying on a static listing because embedded-component availability and commercial terms can change.
What is the price of STM32G0B0RET6?
The current STM32G0B0RET6 commercial quote is generated through the Request a Quote form on this page. Submit the required quantity, package quantity, shipment destination, and target date to obtain current pricing and availability. The exact ordering code is STM32G0B0RET6, which identifies the 64-LQFP device and helps prevent confusion with other STM32G0 package and flash configurations.
What is the lead time and stock status for STM32G0B0RET6?
Request the current STM32G0B0RET6 stock position and lead time through the Request a Quote form on this page. Include your required order quantity, shipment country, target date, and whether the parts must be supplied in tray or reel packaging. Stock and lead time are confirmed for each order request rather than represented by a static value that may quickly become inaccurate.
Does the STM32G0B0RET6 support 2.5 V and 3.3 V operation?
The STM32G0B0RET6 product listing identifies 2.5 V and 3.3 V operating conditions. Final rail selection must also account for the selected GPIO voltage, communication-interface requirements, internal regulator state, and the manufacturer electrical-characteristics table. Use the exact datasheet limits when designing decoupling, level shifting, reset, and power-supply current margins.

داتای سەرچاوەی ئەندازیاری بۆ STM32G0B0RET6 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the STM32G0B0RET6 when a design needs a 64 MHz Arm Cortex-M0+ controller with 512 KB of flash, up to 144 KB of RAM, and a generous 64-pin package. It is particularly suitable for industrial controls, appliance boards, sensor hubs, communications equipment, and supervisory power-control systems. Select STM32G0B1RET6 when the later STM32G0B1 revision offers useful expanded resources and the manufacturer documentation confirms electrical and peripheral compatibility. STM32G0B0RE is appropriate when the base family configuration is sufficient and the required ordering suffix can be matched exactly. STM32G0B1RE offers another same-family evaluation point when its additional capabilities justify the change. Do not substitute the smaller STM32F050C4T6A without a complete board and firmware redesign. Physical package equality is only the first checkpoint: validate pin multiplexing, reset and clock behavior, peripheral changes, supply limits, programming, qualification, and production firmware before approval.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە STM32G0B1RET6 STM32G0B0RE STM32G0B1RE
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 64-LQFP 64-LQFP 64-LQFP 64-LQFP
Architecture 32-bit RISC 32-bit Arm Cortex-M0+ family 32-bit RISC 32-bit Arm Cortex-M0+ family
Product Family STM32G0 mainstream value line STM32G0B1 family STM32G0B0 family STM32G0B1 family
Pin Count 64 pins 64 pins 64 pins 64 pins

جیاکەرەوە سەرەکییەکان

  • Substantial embedded program storage in a mainstream controller (بەراورد بەSTM32G0B0RE)
  • Broad pin access for embedded-control designs (بەراورد بەSTM32G0B1RE)
  • Direct family continuity for controlled board reuse (بەراورد بەSTM32F050C4T6A)

تێبینییەکانی دیزاین

Create the footprint from the manufacturer 64-LQFP package drawing rather than relying on a generic 64-pin symbol. Confirm pin-1 orientation, lead pitch, exposed dimensions, solder-mask limits, paste volume, and courtyard clearance against the exact STMicroelectronics drawing. The listed 10 mm by 10 mm body size does not by itself define every land pattern, so the mechanical drawing remains the controlling document for manufacturability.

Use separate decoupling close to each supply pin and preserve the return path beneath the device where the layout rules permit it. The product listing identifies 2.5 V and 3.3 V operating conditions, but the applicable input-voltage range, internal-regulator configuration, and peripheral current limits must come from the electrical-characteristics table. Validate startup, brownout behavior, and peripheral loading across the complete power-supply tolerance range before release.

Do not treat a shared 64-LQFP footprint as proof of complete drop-in equivalence. Compare reset, boot, oscillator, debug, communication, and GPIO alternate functions for every pin used by the board. Also check device-revision changes and firmware support. After any substitution, perform boundary tests for clock startup, low-power exit, communications, timers, and safety-related output states rather than checking only that the application appears to boot.

Keep sensitive sensor inputs, oscillator paths, and communication traces away from high-current loads and switching-regulator nodes. Assign continuous ground references beneath signal routes and use the analog and digital return structure recommended by the manufacturer. If the board mixes communication, precision measurement, and switching functions, partition the layout by function and provide filtering only after the signal paths have been controlled.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

Compliance status was not stated in the manufacturer page excerpt or distributor snippets. Confirm the applicable declarations and environmental qualifications using the exact STM32G0B0RE documentation.

داتا پشتڕاستکراوەتەوە لە: 2026-11-03 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

stm32g0b0ret6 pinout STM32G0B0RET6 datasheet STM32G0B0RET6 datasheet pdf STM32G0B0RET6 equivalent STM32G0B0RET6 replacement STM32G0B0RET6 cross reference STM32G0B0RET6 footprint STM32G0B0RET6 price STM32G0B0RET6 stock STMicroelectronics STM32G0B0RET6 STM32G0B0RET6 vs STM32G0B1RET6 STM32G0B0RET6 64MHz 512KB STM32G0B0RET6 LQFP64 application circuit

پێکهاتە و زاراوە پەیوەندیدارەکان

STMicroelectronics STM32G0B0RET6 STM32G0B0RE STM32G0B1RET6 STM32G0B1RE STM32F050C4T6A Arm Cortex-M0+ RISC microcontroller MCU embedded controller semiconductor STM32G0 64-LQFP LQFP package family surface mount SMD 512 KB flash 144 KB RAM 64 MHz 2.5 V 3.3 V GPIO industrial control building automation sensor hub communications gateway
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ