STM32G474QBT6 - 170MHz Cortex-M4F 128KB Flash MCU | STMicroelectronics
MPN: STM32G474QBT6 ✓ چالاکSTM32G474QBT6 گشتی
An STM32G4-series microcontroller is an embedded system-on-chip designed for real-time control, industrial automation, motor control, power conversion, communications, and precision measurement. Its Cortex-M4F architecture provides floating-point arithmetic, while the STM32G4 peripheral set targets applications requiring fast control loops, high-resolution analog conversion, and flexible timer resources. The STM32G474QBT6 also includes an Arm Cortex-M4F processor with a 170 MHz clock rating and 128 KB of program flash.
The STM32G474QBT6 is identified by distributor listings as a 32-bit, 170 MHz Cortex-M4F MCU with 128 KB flash in a 128-LQFP package. Listings also describe the device as an STMicroelectronics STM32G4 microcontroller with math acceleration, high-resolution timers, and extensive mixed-signal capabilities. These features make it suitable for applications such as digital power controllers, motor-control systems, industrial sensor platforms, communications equipment, and precision measurement instruments.
The device family is designed for applications that need more control performance than general-purpose entry-level microcontrollers while retaining the simplicity of a single-chip embedded controller. Its analog and timer peripherals can reduce the need for discrete components in signal-conditioning and closed-loop systems. The 128-LQFP package exposes a larger pin count than smaller STM32 devices, supporting more GPIO, communication, debug, timer, and analog connections on a single PCB.
Typical use cases include digital power supplies, servo and stepper-motor control, industrial automation modules, data acquisition systems, communications hubs, and embedded instrumentation. In these systems, the Cortex-M4F core handles control software, the analog peripherals support sensor and feedback networks, and the high-resolution timer resources improve timing accuracy for power conversion and motor-control algorithms.
When designing a PCB around the STM32G474QBT6, verify the complete pin assignment, exposed thermal and supply requirements, decoupling network, clock configuration, and debug interface against the manufacturer datasheet. The 128-LQFP footprint requires careful escape routing and adequate copper thermal management if the device dissipates significant power. Use the Request a Quote form on this page for current commercial availability, lead time, and quotation requirements.
جێگرەوەکانی جێگۆڕکێ بۆ STM32G474QBT6 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ STM32G474QBT6 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Math Accelerator, Package, Flash Memory, Product Type.
STM32G474QET6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32G474QBT6 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 32-bit ARM Cortex-M4F microcontroller |
| CPU Core | ARM Cortex-M4F |
| Maximum CPU Frequency | 170 MHz |
| Flash Memory | 128 KB |
| Memory Organization | 128K x 8 bits |
| پاکێج | 128-pin LQFP (14 x 14 mm) |
| جۆری دامەزراندن | Surface mount |
| Architecture | 32-bit |
| Math Accelerator | Supported |
| Timer Resources | High-resolution timer resources |
ڕێنمایی ڕێکخستنی پینی STM32G474QBT6 128-pin lqfp (14 x 14 mm)
ڕێکخستنی پین بۆ STM32G474QBT6 (پاکێجی 128-pin lqfp (14 x 14 mm)). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ STM32G474QBT6.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
STM32G474QBT6 گونجاوە بۆ 6 بەکارھێنانs: Digital Power Converters, Industrial Motor Control, Precision Data Acquisition, Industrial Communications Gateway, Test and Measurement Equipment, Conditioning and Automation.
Digital Power Converters
The STM32G474QBT6 fits digital power conversion because its 170 MHz Cortex-M4F core can execute compensation and control algorithms while the STM32G4 family provides math acceleration, high-resolution timers, and mixed-signal resources. In an LLC, synchronous buck, or PFC controller, the MCU can generate PWM commands, sample voltage and current feedback, monitor faults, and coordinate startup. The 128-LQFP package provides numerous pins for gate-drive control, sensing, communications, and protection signals. Design validation should verify ADC timing, PWM resolution, supply rails, and thermal performance against the power stage.
پێشنیارکراو
Industrial Motor Control
The STM32G474QBT6 is appropriate for sophisticated motor-control platforms requiring faster computation than general-purpose microcontrollers. Its 170 MHz Cortex-M4F core can execute current and speed control loops, while math acceleration supports filtering and transform calculations used in field-oriented control. The high-resolution timer resources support accurate PWM generation and input capture for position sensing. A practical implementation may include external power stages, gate drivers, current sensors, and protection circuitry. Verify timer-channel assignments, ADC synchronization, pin multiplexing, and thermal conditions for the selected motor-drive topology.
پێشنیارکراو
Precision Data Acquisition
The STM32G474QBT6 can serve as the central controller in precision data-acquisition equipment because its 170 MHz ARM Cortex-M4F core provides real-time processing and the STM32G4 family is positioned for high-resolution mixed-signal applications. It can process sensor outputs, apply digital filtering, maintain calibration tables, timestamp measurements, and communicate results over an industrial network. The 128-LQFP package exposes enough connections for analog inputs, references, communications, and control signals. Validate converter resolution, acquisition time, input impedance, reference stability, and channel multiplexing in the manufacturer datasheet before selecting external components.
پێشنیارکراو
Industrial Communications Gateway
The STM32G474QBT6 is suitable for an industrial communications gateway that must handle protocol processing while also monitoring local analog and digital signals. Its 170 MHz Cortex-M4F core provides useful protocol-processing headroom, and the 128 KB flash provides room for firmware, configuration, and communication stacks. The STM32G4 peripheral mix can support high-speed timers, multiple serial interfaces, and control functions. A gateway design should verify the exact USART, UART, USB, CAN, or Ethernet capabilities required, because peripheral availability depends on the complete STM32G474 device configuration. Use the manufacturer reference manual for peripheral and pin constraints.
پێشنیارکراو
Test and Measurement Equipment
The STM32G474QBT6 can form the control core of compact test and measurement equipment that combines precision timing, signal acquisition, and a communications interface. The 170 MHz Cortex-M4F core can coordinate measurements, calculate corrections, operate a local display, and transfer results to a host. Its STM32G4-family analog and timer resources make it a logical platform for instruments requiring accurate triggering, sampling, and feedback. The 128-LQFP package also offers ample I/O for connectors, controls, and communication transceivers. Confirm ADC accuracy, timer jitter, reference-voltage behavior, and analog-pin restrictions for each instrument architecture.
پێشنیارکراو
Conditioning and Automation
The STM32G474QBT6 is appropriate for smart building and equipment-conditioning systems that combine local control, communications, and analog sensing. Its 170 MHz Cortex-M4F core can run supervisory logic, event handling, filtering, and network protocols while high-resolution timers support motor, valve, or actuator sequencing. The 128-LQFP footprint provides a practical number of GPIO and peripheral connections for room controls, environmental sensors, and communication transceivers. For deployment, verify operating-temperature requirements, oscillator tolerances, watchdog behavior, firmware update strategy, and the availability of the exact communication peripherals needed by the system.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ STM32G474QBT6 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | STM32G474QET6 |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Package | 128-LQFP (14x14 mm) | 128-LQFP (14x14 mm) |
| Product Family | STM32G4 | STM32G4 |
جیاکەرەوە سەرەکییەکان
- Higher MCU processing frequency than entry-level STM32 devices (بەراورد بەSTM32G474QET6)
- 128 KB flash supports larger embedded applications (بەراورد بەSTM32G474QET6)
- Generous 128-LQFP interface access (بەراورد بەSTM32G474QET6)
- Dedicated performance for digital power and motor control (بەراورد بەSTM32G474QET6)
تێبینییەکانی دیزاین
Treat the 128-LQFP footprint as a high-pin-count routing problem. Place the device centrally enough to reduce escape-route congestion, maintain the datasheet-defined clearance and creepage distances, and provide dedicated ground connections around analog and digital sections where the recommended layout calls for them. Route the SWD and trace/debug signals away from switching nodes, and check the land pattern against the manufacturer package drawing before releasing artwork.
Use the manufacturer power-supply pin and decoupling requirements as the basis for the PCB power network. Place the required bulk and local decoupling capacitors close to their associated supply pins, minimize loop area, and separate sensitive analog supplies from noisy digital or switching paths. Verify startup behavior, operating-voltage limits, and current demands in the electrical characteristics because the product snippets do not define the complete power specification.
Assign analog inputs, timer channels, communication pins, and debug signals only after reviewing the complete pin-description and alternate-function tables. If high-speed interfaces or external memories are required, follow the manufacturer recommendations for impedance, topology, grounding, and via transitions. Do not infer peripheral availability from family marketing descriptions; confirm that the selected pin and device variant support the intended function.
Estimate junction temperature using the actual input voltage, core load, clock rate, ambient temperature, and the package thermal data in the manufacturer documentation. Keep the LQFP thermal copper area unobstructed, avoid long exposed thermal-pad assumptions that do not apply to this package, and provide airflow when the calculated dissipation leaves inadequate temperature margin. Recheck the calculation when clock frequency, peripherals, or ambient conditions change.
Common errors include treating every STM32G4 ordering code as interchangeable, assuming identical peripheral availability from the family name, and copying a generic 128-LQFP footprint without checking pin dimensions. Review the exact suffix, temperature grade, boot configuration, memory size, and pin muxing before schematic release. After PCB assembly, validate power rails, reset behavior, oscillator startup, and SWD connectivity using the manufacturer-recommended bring-up sequence.
زانیاری پابەندبوون
The product snippets do not state material-compliance or automotive-qualification results. Verify the declarations for the exact STM32G474QBT6 ordering code with STMicroelectronics.